Influence of the Iron as a Dopant on the Refractive Index of WO3.

Results on studies of pure tungsten oxide WO3 and 2, 3 and 4% Fe-doped WO3 grown on the sapphire substrates by reactive pulsed laser deposition technique are reported. From X-ray diffraction it results that the crystalline structures changed with the substrate temperature and the peaks diffraction having a small shift by the amount of Fe content in WO3 lattice was noticed. Scanning electron microscopy presented a random behavior of WO3 nanocrystallites size with substrate temperatures. In the presence of 2% Fe-doped WO3, the nanocrystallites size varied gradually from 60 nm to 190 nm as substrate temperature increased. The transmission spectra of the pure and 2, 3 and 4% Fe-doped WO3 films were obtained within the 300-1200 nm spectral range. The refractive index of WO3 and Fe-doped WO3 layers were calculated by the Swanepoel method. The refractive index of pure WO3 shows a variation from 2.35-1.90 and for 2% Fe-doped WO3 from 2.30-2.00, as the substrate temperature increased. The contents of 3 and 4% Fe-doped WO3 presented nearly identical values of the refractive index with pure and 2% Fe-doped WO3, in error limits, at 600 °C. The optical band gap changes with substrate temperature from 3.2 eV to 2.9 eV for pure WO3 and has a small variation with the Fe.

The Influence of the Preparation Method on the Physico-Chemical Properties and Catalytic Activities of Ce-Modified LDH Structures Used as Catalysts in Condensation Reactions.

Mechanical activation and mechanochemical reactions are the subjects of mechanochemistry, a special branch of chemistry studied intensively since the 19th century. Herein, we comparably describe two synthesis methods used to obtain the following layered double hydroxide doped with cerium, Mg3Al0.75Ce0.25(OH)8(CO3)0.5·2H2O: the mechanochemical route and the co-precipitation method, respectively. The influence of the preparation method on the physico-chemical properties as determined by multiple techniques such as XRD, SEM, EDS, XPS, DRIFT, RAMAN, DR-UV-VIS, basicity, acidity, real/bulk densities, and BET measurements was also analyzed. The obtained samples, abbreviated HTCe-PP (prepared by co-precipitation) and HTCe-MC (prepared by mechanochemical method), and their corresponding mixed oxides, Ce-PP (resulting from HTCe-PP) and Ce-MC (resulting from HTCe-MC), were used as base catalysts in the self-condensation reaction of cyclohexanone and two Claisen-Schmidt condensations, which involve the reaction between an aromatic aldehyde and a ketone, at different molar ratios to synthesize compounds with significant biologic activity from the flavonoid family, namely chalcone (1,3-diphenyl-2-propen-1-one) and flavone (2-phenyl-4H-1benzoxiran-4-one). The mechanochemical route was shown to have indisputable advantages over the co-precipitation method for both the catalytic activity of the solids and the costs.

Optical coherence tomography microscopy in experimental traumatic brain injury.

Worldwide elderly traumatic brain injury (TBI) patients tend to become an increasing burden to the society. Thus, a faster and less expensive way of evaluating TBI victims is needed. In the present study we investigated if optical coherence tomography (OCT) could be used as such a method. By using an animal model, we established if OCT can detect cortical changes in the acute phase of a penetrating TBI, in young (5-7 months) and old (20-22 months) rats. Due to the long-term evolution of TBI's, we wanted to investigate to what extent OCT could detect changes within the cortex in the chronic phase. Adult (7-12 months) male rats were used. Surprisingly, OCT imaging of the normal hemisphere was able to discriminate age-related differences in the mean gray values (MGV) of recorded pixels (p = .032). Furthermore, in the acute phase of TBI, OCT images recorded at 24 hr after the injury showed differences between the apparent damaged area of young and aged animals. Changes of MGV and skewness were only recorded 48 hr after injury. Monitoring the chronical evolution of the TBI with OCT revealed changes over time exceeding the normal range recorded for MGV, skewness and kurtosis, 14 and 21 days after TBI. Although in the present study we still used an extremely invasive approach, as technology improves, less invasive and non-harmful ways of recording OCT may allow for an objective way to detect changes within the brain structure after brain injuries.

Bio-Based Polyamide 1010 with a Halogen-Free Flame Retardant Based on Melamine-Gallic Acid Complex.

This work aims at developing polyamide 1010 (PA1010) composites with improved fire behavior using a halogen-free flame-retardant system based on melamine (Me) and gallic acid (GA) complexes (MA). The MA complexes were formed by hydrogen bonding, starting from 1:2, 1:1, 2:1 Me:GA molar ratios. PA1010 composites were obtained by melt mixing, followed by compression molding. MA provided a plasticizing effect on the PA1010 matrix by decreasing the glass transition temperature. The influence of MA on PA1010 chain packaging was highlighted in the X-ray diffraction patterns, mainly in the amorphous phase, but affected also the α and γ planes. This was reflected in the dynamic mechanical properties by the reduction of the storage modulus. H-bonds occurrence in MA complexes, improved the efficiency in the gaseous form during fire exposure, facilitating the gas formation and finally reflected in thermal stability, thermo-oxidative stability, LOI results, and vertical burning behavior results. PA1010 containing a higher amount of GA in the complex (MA12) displayed a limiting oxygen index (LOI) value of 33.6%, much higher when compared to neat PA1010 (25.8%). Vertical burning tests showed that all the composites can achieve the V-0 rating in contrast with neat PA1010 that has V-2 classification.