Periodic liquid crystalline waveguiding microstructures.

Different methods allowing for creating optical waveguides with liquid-crystal (LC) cores, in which molecules form periodic patterns with precisely controlled periods, are reported. The first one is based on reversible photoalignment with high-resolution selective illumination and allows to control the period of LC molecules inside silica microcapillaries. The second method employs microstructures formed in PDMS, allowing to obtain both: LC-core waveguides and a set of specially designed periodic microelectrodes used for the periodic reorientation of molecules. Using both methods, we successfully controlled the period of the patterned alignment in the range from about 500 µm and scaled it down to as small as 20 µm. We performed experimental studies on waveguiding phenomenon in such structures, in view to obtain transmission spectra typical to optical fiber gratings. Since the results achieved in experimental conditions differed from those expected, the additional numerical simulations were performed to explain the observed effects. Finally, we obtained the waveguiding in a blue phase LC, characterized by naturally created three-dimensional periodicity with periods smaller than one micrometer. In such a structure, we were able to observe first-order bandgap, and moreover, we were able to tune it thermally in nearly the whole visible spectral range.

Three-Dimensional-Printed Mechanical Transmission Element with a Fiber Bragg Grating Sensor Embedded in a Replaceable Measuring Head.

Compliant mechanisms have gained an increasing interest in recent years, especially in relation to the possibility of using 3D printers for their production. These mechanisms typically find applications in precise positioning systems of building robotic devices or in sensing where they can be used to characterize displacement. Three-dimensional printing with PLA materials allows fiber optic-based sensors to be incorporated into the structures of properly designed compliant mechanisms. Therefore, in this paper, an innovative technology is described, of a Fiber Bragg Grating (FBG) sensor embedded in a measuring head which was then inserted into a specially designed mechanical transmission element. The shape of this element is based on clippers that allow to freely modify the amplification of displacement amplitude so that the FBG sensor always works in the most optimal regime without any need to modify its external dimensions. Flexural sensitivity of the replaceable measuring head equal to 1.26 (mε/mm) can be adapted to the needs of the flexure design.

Nanostructured active and photosensitive silica glass for fiber lasers with built-in Bragg gratings.

A nanostructured core silica fiber with active and photosensitive areas implemented within the fiber core is demonstrated. The photosensitivity, active and passive properties of the fiber can be independently shaped with this new approach. We show that discrete local doping with active ions in form of nanorods allow to obtain effective laser action as in case of continuous distribution of the ions in the core. Co-existing discrete photosensitive nanostructure of germanium doped silica determine single-mode performance and allow inscription of highly efficient Bragg grating over the entire core area. Each nanostructure do not degrade performance of other one since physical interaction between active and photosensitive areas are removed. As a proof of concept, we have designed and fabricated the nanostructured, ytterbium single-mode silica fiber laser with the Bragg grating inscribed in the entire core area. We demonstrated fiber laser with good quality of generated laser beam (M2=1.1) with lasing efficiency of 44% and inscribed Bragg grating with 98.5% efficiency and -18 dB contrast.

Deep learning-based method for the continuous detection of heart rate in signals from a multi-fiber Bragg grating sensor compatible with magnetic resonance imaging.

A method for the continuous detection of heart rate (HR) in signals acquired from patients using a sensor mat comprising a nine-element array of fiber Bragg gratings during routine magnetic resonance imaging (MRI) procedures is proposed. The method is based on a deep learning neural network model, which learned from signals acquired from 153 MRI patients. In addition, signals from 343 MRI patients were used for result verification. The proposed method provides automatic continuous extraction of HR with the root mean square error of 2.67 bpm, and the limits of agreement were -4.98-5.45 bpm relative to the reference HR.

In-Plane Strain Measurement in Composite Structures with Fiber Bragg Grating Written in Side-Hole Elliptical Core Optical Fiber.

In this paper, the application of a fiber Bragg grating written in a highly birefringent side-hole elliptical core optical fiber for two-axial strain measurement is presented. Hybrid optical fiber structures achieved by combining large side-holes and elliptical core result in a very high birefringence of 1 × 10-3 and thus high initial Bragg peak spectral separation of 1.16 nm, as well as a very high transverse force sensitivity, of up to 650 pm/(N/mm) or even -1150 pm/(N/mm), depending on the fiber orientation with respect to the applied force. Due to the ~22 %m/m GeO2 concentration in the core the fiber being highly photosensitive, which significantly simplifies FBG fabrication by UV illumination without the need for prior hydrogen loading, which worsens thermal stability. Finally, the developed FBGs written in the highly birefringent side-hole elliptical core optical fiber were embedded in the square composite plates and applied for strain measurements. Tests of two-directional four-point bending have shown usability of such FBG for two-axial in-plane strain measurement with a single FBG in iso-thermal conditions.

UV Sensor Based on Fiber Bragg Grating Covered with Graphene Oxide Embedded in Composite Materials.

Polymer-matrix composites degrade under the influence of UV radiation in the range of the 290-400 nm band. The degradation of polymer-matrix composites exposed to UV radiation is characterized by extensive aging of the epoxy matrix, resulting in deterioration of their mechanical properties. Glass fibers/epoxy resin composites were made by an out-of-autoclave method whereas a fiber optic sensor was placed between different layers of laminates. In our work, we used a fiber Bragg grating sensor covered with graphene oxide and embedded in a polymer matrix composite to monitor UV radiation intensity. Measurements of UV radiation may allow monitoring the aging process of individual components of the polymer composite. In order to estimate the number of microcracks of epoxy resin, microstructure observations were carried out using a scanning electron microscope.

Enhancement of spectral response of Bragg gratings written in nanostructured and multi-stepped optical fibers with radially shaped GeO2 concentration.

We present experimental results on fiber Bragg gratings inscription in nanostructured graded-index (nGRIN) and multi-step index (MSIN) optical fibers, both having non-uniform radial distribution of GeO2 dopant in the fiber cores. In particular, the positive role of radial shaping the GeO2 distribution in the fiber core on grating reflection efficiency is reported. We postulate that an appropriate spatial distribution of the germanium concentration that matches the fundamental mode profile improves grating spectral response due to more efficient grating-mode interaction, as compared with uniformly doped step-index optical fibers with the same overall doping level. Moreover, we show that radially shaped fibers exhibit moderately higher temperature responses than their step-index counterparts.

Self-Organized, One-Dimensional Periodic Structures in a Gold Nanoparticle-Doped Nematic Liquid Crystal Composite.

Composite structures exhibiting a periodic arrangement of building blocks can be found in natural systems at different length scales. Recreating such systems in artificial composites using the principles of self-assembly has been a great challenge, especially for 1D microscale systems. Here, we present a purposely designed composite material consisting of gold nanoparticles and a nematic liquid crystal matrix that has the ability to self-create a periodic structure in the form of a one-dimensional photonic lattice through a phase separation process occurring in a confined space. Our strategy is based on the use of a thermoswitchable medium that reversibly and quickly responds to both heating and cooling. We find that the period of the structure is strongly related to the size of the confining space. We believe that our findings will allow us to not only better understand the phase separation process in multicomponent soft/colloid mixtures with useful optical properties but also improve our understanding of the precise assembly of advanced materials into one-dimensional periodic systems, with prospective applications in future photonic technologies.

Inscription of Bragg gratings in nanostructured graded index single-mode fibers.

We report on efficient inscription of fiber Bragg gratings (FBGs) in a new type of single mode fiber with nanostructured core and with an effective parabolic graded index profile, using the standard phase mask method and a 248 nm pulsed laser. A nanostructured core allows to obtain high concentration of GeO2 in subwavelength glass rods and simultaneously to maintain low average germanium dopant level of silica similarly to standard single mode fibers. We showed that in a nanostructured core fiber, a factor of 3 better efficiency in gratings inscription was achieved, although the fiber has 20% lower average concentration of GeO2 with respect to SMF-28. In the nanostructured fiber we obtained a significant improvement in temperature sensitivity, while the strain sensitivity of FBG in nGRIN optical fiber is the same as in case of standard single-mode fiber (SMF-28). We have measured the strain sensitivity of 0.72 × 10-6 1/µÎµ (1.11 pm/µÎµ@1.53µm), and the temperature sensitivity is about 30% higher than for FBG in SMF-28 and equals to 10.2 × 10-6 1/K (15.6 pm/K@1.53µm).

Linearly chirped tapered fiber-Bragg-grating-based Fabry-Perot cavity and its application in simultaneous strain and temperature measurement.

A novel concept of a Fabry-Perot (F-P) cavity composed of two linearly chirped fiber Bragg gratings written in a thermally fused fiber taper is presented. Both chirped gratings are written in counter-directional chirp configuration, where chirps resulting from the optical fiber taper profile and linearly increasing grating periods cancel each other out, forming a high-quality F-P resonator. A new strain-sensing mechanism is proposed in the presented structure, which is based on strain-induced detuning of the F-P resonator. Due to the different strain and temperature responses of the cavity, the resonator can be used for the simultaneous measurement of these physical quantities, or it can be used as a temperature-independent strain sensor.

Numerical analysis of double chirp effect in tapered and linearly chirped fiber Bragg gratings.

In this paper, a theoretical analysis of recently developed tapered chirped fiber Bragg gratings (TCFBG) written in co-directional and counter-directional configurations is presented. In particular, the effects of the synthesis of chirps resulting from both a fused taper profile and a linearly chirped fringe pattern of the induced refractive index changes within the fiber core are extensively examined. For this purpose, a numerical model based on the transfer matrix method (TMM) and the coupled mode theory (CMT) was developed for such a grating. The impact of TCFBG parameters, such as grating length and steepness of the taper transition, as well as the effect of the fringe pattern chirp rate on the spectral properties of the resulting gratings, are presented. Results show that, by using the appropriate design process, TCFBGs with reduced or enhanced resulting chirp, and thus with widely tailored spectral responses, can be easily achieved. In turn, it reveals a great potential application of such structures. The presented numerical approach provides an excellent tool for TCFBG design.

Numerical analysis of the harmonic components of the Bragg wavelength content in spectral responses of apodized fiber Bragg gratings written by means of a phase mask with a variable phase step height.

The influence of the complex interference patterns created by a phase mask with variable diffraction efficiency in apodized fiber Bragg grating (FBGs) formation on their reflectance spectra is studied. The effect of the significant contributions of the zeroth and higher (m>±1) diffraction orders on the Bragg wavelength peak and its harmonic components is analyzed numerically. The results obtained for Gaussian and tanh apodization profiles are compared with similar data calculated for a uniform grating. It is demonstrated that when an apodized FBG is written using a phase mask with variable diffraction efficiency, significant enhancement of the harmonic components and a reduction of the Bragg wavelength peak in the grating spectral response are observed. This is particularly noticeable for the Gaussian apodization profile due to the substantial contributions of phase mask sections with relatively small phase steps in the FBG formation.

Numerical model of tapered fiber Bragg gratings for comprehensive analysis and optimization of their sensing and strain-induced tunable dispersion properties.

A versatile numerical model for spectral transmission/reflection, group delay characteristic analysis, and design of tapered fiber Bragg gratings (TFBGs) is presented. This approach ensures flexibility with defining both distribution of refractive index change of the gratings (including apodization) and shape of the taper profile. Additionally, sensing and tunable dispersion properties of the TFBGs were fully examined, considering strain-induced effects. The presented numerical approach, together with Pareto optimization, were also used to design the best tanh apodization profiles of the TFBG in terms of maximizing its spectral width with simultaneous minimization of the group delay oscillations. Experimental verification of the model confirms its correctness. The combination of model versatility and possibility to define the other objective functions of Pareto optimization creates a universal tool for TFBG analysis and design.

Fabrication of phase masks with variable diffraction efficiency using HEBS glass technology.

A new fabrication method of apodized diffractive optical elements is proposed. It relies on using high energy beam sensitive glass as a halftone mask for variable diffraction efficiency phase masks generation in a resist layer. The presented technology is especially effective in mass production. Although fabrication of an amplitude mask is required, it is then repeatedly used in a single shot projection photolithography, which is much simpler and less laborious than the direct variable-dose pattern writing. Three prototypes of apodized phase masks were manufactured and characterized. The main advantages as well as limitations of the proposed technology are discussed.

Modeling of amplification and light generation in one-dimensional photonic crystal using a multiwavelength transfer matrix approach.

We present an analysis of amplification and lasing in one-dimensional isotropic nonlinear photonic crystal (1D PC), which is based on a generalized (multiwavelength) transfer matrix method. This approach was used for modeling a Raman signal amplification in 1D PC and in an homogenous structure, showing advantages of a stratified medium. Moreover, the threshold operation of a 1D PC Raman laser is studied, assuming both strong as well as depleted pump. The normalized threshold gain characteristics for various end reflections and photonic crystal laser length were calculated.