Biomechanical analysis of practitioner's gesture for peripheral venous catheter insertion.

Peripheral venous catheter insertion (PVCI) is one of the most common procedures performed by healthcare professionals but remains technically difficult. To develop new medical simulators with better representativeness of the human forearm, an experimental study was performed to collect data related to the puncturing of human skin and a vein in the antebrachial area. A total of 31 volunteers participated in this study. Force sensors and digital image correlation were used to measure the force during the palpation and puncturing of the vein and to retrieve the kinematics of the practitioner's gesture. The in vivo skin rupture load, vein rupture load, and friction loads for skin only and for both the skin and vein were (mean ± standard deviation) 0.85 ± 0.34 N, 1.25 ± 0.37 N, -0.49 ± 0.19 N, and -0.51 ± 0.16 N, respectively. The results of this study can be used to develop realistic skin and vein substitutes and mechanically assess them by reproducing the practitioner's gesture in a controlled fashion.

Abdominal wall muscle elasticity and abdomen local stiffness on healthy volunteers during various physiological activities.

The performance of hernia treatment could benefit from more extensive knowledge of the mechanical behavior of the abdominal wall in a healthy state. To supply this knowledge, the antero-lateral abdominal wall was characterized in vivo on 11 healthy volunteers during 4 activities: rest, pullback loading, abdominal breathing and the "Valsalva maneuver". The elasticity of the abdominal muscles (rectus abdominis, obliquus externus, obliquus internus and transversus abdominis) was assessed using ultrasound shear wave elastography. In addition, the abdomen was subjected to a low external load at three locations: on the midline (linea alba), on the rectus abdominis region and on lateral muscles region in order to evaluate the local stiffness of the abdomen, at rest and during "Valsalva maneuver". The results showed that the "Valsalva maneuver" leads to a statistically significant increase of the muscle shear modulus compared to the other activities. This study also showed that the local stiffness of the abdomen was related to the activity. At rest, a significant difference has been observed between the anterior (0.5N/mm) and the lateral abdomen locations (1N/mm). Then, during the Valsalva maneuver, the local stiffness values were similar for all locations (ranging from 1.6 to 2.2N/mm). This work focuses on the in vivo characterization of the mechanical response of the human abdominal wall and abdomen during several activities. In the future, this protocol could be helpful for investigation on herniated patients.

Mechanical response of human abdominal walls ex vivo: Effect of an incisional hernia and a mesh repair.

The design of meshes for the treatment of incisional hernias could benefit from better knowledge of the mechanical response of the abdominal wall and how this response is affected by the implant. The aim of this study was to characterise the mechanical behaviour of the human abdominal wall. Abdominal walls were tested ex vivo in three states: intact, after creation of a defect simulating an incisional hernia, and after reparation with a mesh implanted intraperitonally. For each state, the abdominal wall was subjected to air pressure loading. Local strain fields were determined using digital image correlation techniques. The strain fields on the internal and external surfaces of the abdominal wall exhibited different patterns. The strain patterns on the internal surface appeared to be related to the underlying anatomy of the abdominal wall. Higher strains were observed along the linea alba than along the perpendicular direction. Under pressure loading, the created incision increased the strain of the abdominal wall compared to the intact state in 5 cases of a total 6. In addition, the mesh repair decreased the strains of the abdominal wall compared to the incised state in 4 cases of 6. These results suggest that the intraperitoneal mesh restores at least partially the mechanical behaviour of the wall and provides quantification of the effects on the strains in various regions.

Effect of two loading rates on the elasticity of the human anterior rectus sheath.

Tensile properties of connective tissues of the abdominal wall are necessary to better analyze the mechanical response of the human abdominal wall. Some tensile properties of these tissues have been reported in the past but data are still missing regarding the dependence of the elasticity on the loading rate, especially for the rectus sheath. Thus the aim of this study was to assess for the variation of human anterior rectus sheath elasticity using two loading rates. Seventeen samples of the rectus sheath were taken from three human post-mortem subjects and tested under tension at two different loading rates (0.01s(-1) and 50s(-1)). The mean value (standard deviation) of the quasi-static elasticity is 5.6 (3.2)MPa for the rectus sheath. The values at the high loading rate are 14 (8.3)MPa. The failure strength and the elasticity (at 50s(-1)) are significantly correlated (r²=0.79, p<0.01). Such a relationship opens the way to the estimation of the failure strength by a unique measurement of the elasticity. The loading rate influence was statistically significant with a linear elasticity 2.5 times greater at 50s(-1) than 0.01s(-1). Thus the loading rate influence on the mechanical properties would have to be taken into account in models considering transitory loading such as coughing and sneezing.

Mechanical response of animal abdominal walls in vitro: evaluation of the influence of a hernia defect and a repair with a mesh implanted intraperitoneally.

Better mechanical knowledge of the abdominal wall is requested to further develop and validate numerical models. The aim of this study was to characterize the passive behaviour of the abdominal wall under three configurations: intact, after creating a defect simulating an incisional hernia, and after a repair with a mesh implanted intraperitonally. For each configuration, controlled boundary conditions were applied (air pressure and then contact loading) to the abdominal wall. 3D local strain fields were determined by digital image correlation. Local strains measured on the internal and external surfaces of the intact abdominal wall showed different patterns. The air pressure and the force applied to the abdominal wall during contact loading were measured and used to determine stiffness. The presence of a defect resulted in a significant decrease of the global stiffness compared to the intact abdominal wall (about 25%). In addition, the presence of the mesh enabled to restore the stiffness to values that were not significantly different from those of the intact wall. These results suggest that intraperitoneal mesh seems to restore the global biomechanics of the abdomen.