On the rapid in situ oxidation of two-dimensional V2CTz MXene in culture cell media and their cytotoxicity.

The plethora of emerging two-dimensional (2D) materials exhibit wide potential application in novel technologies and advanced devices. However, their stability in environmental conditions could be an issue, affecting their application possibilities and posing health risks. Moreover, their decomposed leftovers can also induce a negative influence on human health. In particular, transition metal carbides commonly referred to as MXenes are susceptible to environmental oxidation being decomposed toward transition metal oxides and carbide-derived carbon. In this study we focused on the oxidation-state-related in vitro cytotoxicity of delaminated V2CTz onto immortalized keratinocytes (HaCaT) and malignant melanoma (A375) human cell lines. Due to the fact, that the V2CTx MXenes are least stable from all known obtained MXenes up to date, the vanadium ones were a practical choice to visualize the oxidation-cytotoxic correlation keeping the standards of 24-48 h of cell culturing. We found that the oxidation of V2CTz highly increases their cytotoxicity toward human cells, which is also time and dose dependent. The identified mode of action relates to the cell cycle as well as cellular membrane disintegration through direct physicochemical interactions.

In vitro and in silico studies of interaction of synthetic 2,6,9-trisubstituted purine kinase inhibitors BPA-302, BP-21 and BP-117 with liver drug-metabolizing cytochromes P450

An evaluation of possible interactions with enzymes of drug metabolism (cytochromes P450, CYP) is an important part of studies on safety and, in general, on the properties of any drug or biologically active compound. The article is focused on the preliminary metabolic study of selected 2,6,9-trisubstituted purine kinase inhibitors with significant anticancer activities which we have developed. The compounds BP-21 and BP-117 represent strong CDK inhibitors and the compound BPA-302 was developed as selective FLT3-ITD kinase inhibitor. Here, emphasis is placed on interactions of these compounds with the nine most important forms of CYP to evaluate the possibility of inhibition of these enzymes. The possibility of their inhibitory effect was studied in vitro on selected human liver microsomal CYP enzymes. The most affected enzyme was CYP2C19. Its activity dropped to 22 % of its original value by BPA 302, to 13 % by BP-21 and to 6 % by BP-117 at the highest concentration tested (250 µmol·l(-1)). The results suggest that the metabolism of concomitantly administered drugs should not be significantly affected at lower doses. Molecular docking of BPA-302 indicated that it can bind to active site of both CYP2C19 and CYP2D6 enzymes above the heme cofactor corroborating the experimental data.

beta-caryophyllene oxide and trans-nerolidol affect enzyme activity of CYP3A4 - in vitro and in silico studies.

Evaluation of possible interactions with enzymes of drug metabolism is an important part of studies on safety and, in general, on the properties of any drug or biologically active compound. Here, focus is given on interactions of three sesquiterpenes (beta-caryophyllene oxide (CAO), trans-nerolidol (tNER) and farnesol (FAR)) with CYP3A4. To determine the CYP3A4 activity, specific substrates testosterone (TES) and midazolam (MDZ) were used. In human liver microsomes, the CAO inhibited the MDZ 1´-hydroxylation by mixed type inhibition and K(i) 46.6 microM; TES 6beta-hydroxylation was inhibited more strongly by tNER by the same mechanism and with K(i) of 32.5 microM. Results indicated a possibility of different mode of interaction of both compounds within the active site of CYP3A4 and this was why the molecular docking study was done. The docking experiments showed that the studied sesquiterpenes (CAO and tNER) bound to the CYP3A4 active site cause a significant decrease of binding affinity of substrates tested which corresponded well to the inhibition studies. The inhibition observed, however, most probably does not pose a real harm to microsomal drug metabolism as the levels of sesquiterpenes in plasma (assuming the use of these compounds as spices or flavoring additives) does not usually exceed micromolar range. Hence, the interaction of drugs metabolized by CYP3A4 with sesquiterpenes is less probable.

Structural patterns of the human ABCC4/MRP4 exporter in lipid bilayers rationalize clinically observed polymorphisms.

The ABCC4/MRP4 exporter has a clinical impact on membrane transport of a broad range of xenobiotics. It is expressed at key locations for drug disposition or effects such as in the liver, the kidney and blood cells. Several polymorphisms and mutations (e.g., p.Gly187Trp) leading to MRP4 dysfunction are associated with an increased risk of toxicity of some drugs. So far, no human MRP4 structure has been elucidated, precluding rationalization of these dysfunctions at a molecular level. We constructed an atomistic model of the wild type (WT) MRP4 and the p.Gly187Trp mutant embedded in different lipid bilayers and relaxed them for hundreds of nanoseconds by molecular dynamics simulations. The WT MRP4 molecular structure confirmed and ameliorated the general knowledge about the transmembrane helices and the two nucleotide binding domains. Moreover, our model elucidated positions of three generally unresolved domains: L1 (linker between the two halves of the exporter); L0 (N-terminal domain); and the zipper helices (between the two NBDs). Each domain was thoroughly described in view of its function. The p.Gly187Trp mutation induced a huge structural impact on MRP4, mainly affecting NBD 1 structure and flexibility. The structure of transporter enabled rationalization of known dysfunctions associated with polymorphism of MRP4. This model is available to the pharmacology community to decipher the impact of any other clinically observed polymorphism and mutation on drug transport, giving rise to in silico predictive pharmacogenetics.

Can We Execute Stable Microsecond-Scale Atomistic Simulations of Protein-RNA Complexes?

We report over 30 µs of unrestrained molecular dynamics simulations of six protein-RNA complexes in explicit solvent. We utilize the AMBER ff99bsc0χ(OL3) RNA force field combined with the ff99SB protein force field and its more recent ff12SB version with reparametrized side-chain dihedrals. The simulations show variable behavior, ranging from systems that are essentially stable to systems with progressive deviations from the experimental structure, which we could not stabilize anywhere close to the starting experimental structure. For some systems, microsecond-scale simulations are necessary to achieve stabilization after initial sizable structural perturbations. The results show that simulations of protein-RNA complexes are challenging and every system should be treated individually. The simulations are affected by numerous factors, including properties of the starting structures (the initially high force field potential energy, resolution limits, conformational averaging, crystal packing, etc.), force field imbalances, and real flexibility of the studied systems. These factors, and thus the simulation behavior, differ from system to system. The structural stability of simulated systems does not correlate with the size of buried interaction surface or experimentally determined binding affinities but reflects the type of protein-RNA recognition. Protein-RNA interfaces involving shape-specific recognition of RNA are more stable than those relying on sequence-specific RNA recognition. The differences between the protein force fields are considerably smaller than the uncertainties caused by sampling and starting structures. The ff12SB improves description of the tyrosine side-chain group, which eliminates some problems associated with tyrosine dynamics.

NZVI modified magnetic filter paper with high redox and catalytic activities for advanced water treatment technologies.

The in situ synthesis of air-stable zero-valent iron nanoparticles (NZVI) embedded in cellulose fibers leads to the assembly of highly reactive magnetic filter papers. These engineered materials display a wide range of applications in the treatment of wastewater and drinking water, including chromium removal, phenol degradation, environmental bioremediation, and catalysis.

Quaternized carbon dot-modified graphene oxide for selective cell labelling--controlled nucleus and cytoplasm imaging.

Cationic quaternized carbon dots (QCDs) and anionic graphene oxide sheets (GO) are combined via non-covalent interactions following a self-assembly pathway to form highly biocompatible and fluorescent hybrid materials. These hybrids act as selective probes with controlled labelling of the cell nucleus or cytoplasm depending on the QCD loading.

In silico structural and functional analysis of fragments of the ankyrin repeat protein p18(INK4c).

Ankyrin repeat proteins (ARPs) are ubiquitous proteins that play critical regulatory roles in organisms and consist of repeating motifs (ankyrin repeats) stacked in non-globular, almost linear, "quasi one-dimensional" configurations. They also have highly unusual mechanical properties, notably ARPs can behave as nano-springs. Both their essential cellular functions and distinctive nano-mechanical properties have aroused interest in ARPs for potential applications in medicine and nanotechnology. Further, the modular architecture of ARPs, which lack the long-range contacts that typically stabilize globular proteins, provides a new paradigm for understanding protein stability and folding mechanisms of proteins. In the present study, the stability of ARP p18INK4c (p18) and fifty p18 fragments was investigated by all- atomic molecular dynamics (MD) simulations in explicit water on a ~3.3 micro- seconds timescale. The fragment simulations indicate that p18 alpha-helices are significantly stabilized by tertiary interactions, because in the absence of their native context they readily melt. All single p18 ARs and their structural elements are also unstable outside their native context. The minimal stable motifs are pairs of ARs, implying that inter-repeat contacts are essential for AR stability. Further, pairs of internal ARs are less stable than pairs that include a native capping AR. The MD simulations also provide indications of the functional roles of p18 turns and loops; the turns appear to be essential for the stability of the protein, while the loops both help to stabilize the p18 structure and are involved in recognition processes. Temperature-induced unfolding analysis shows that the p18 melts from the N-terminus to the C- terminus.

Docking-based development of purine-like inhibitors of cyclin-dependent kinase-2.

The cell division cycle is controlled by cyclin-dependent kinases (cdk), which consist of a catalytic subunit (cdk1-cdk8) and a regulatory subunit (cyclin A-H). Purine-like inhibitors of cyclin-dependent kinases have recently been found to be of potential use as anticancer drugs. Rigid and flexible docking techniques were used for analysis of binding mode and design of new inhibitors. X-ray structures of three (ATP, olomoucine, roscovitine) cdk2 complexes were available at the beginning of the study and were used to optimize the docking parameters. The new potential inhibitors were then docked into the cdk2 enzyme, and the enzyme/inhibitor interaction energies were calculated and tested against the assayed activities of cdk1 (37 compounds) and cdk2 (9 compounds). A significant rank correlation between the activity and the rigid docking interaction energy has been found. This implies that (i) the rigid docking can be used as a tool for qualitative prediction of activity and (ii) values obtained by the rigid docking technique into the cdk2 active site can also be used for the prediction of cdk1 activity. While the resulting geometries obtained by the rigid docking are in good agreement with the X-ray data, the flexible docking did not always produce the same inhibitor conformation as that found in the crystal.