Fermi Edge of Semimetallic Borophane Sheets and its Reduction by a Porous Structure.

Theoretically predicted materials are often synthesized in low yields, and unexpected relationships are often encountered between the target materials and byproducts. Recently, two-dimensional boron materials proposed on the basis of model simulations and first principles calculations and possessing abundant atomic structures have attracted considerable interest. Borophane or the hydrogen boride (HB) sheet has been predicted to be the Dirac nodal semimetal when it has a boron network of nonsymmorphic symmetry. Upgrading the standard method, we fabricated freestanding HB sheets possessing either an apparent Fermi edge, reduced spectral weight, or a Fermi-level energy gap, as confirmed by using microbeam photoemission spectroscopy. The gapless electronic structures were correlated with terminal B-H bonds at the sheet edges, indicating the electronic modification of the porous structure as directly microscopically observed. The gapped or insulating sheet was fabricated via oxidation. This research provides methods for regulating the structural morphology and electronic states of HB sheets during synthesis.

Larvae of Clistobothrium grimaldii (Cestoda: Phyllobothriidea) from a Cape fur seal (Arctocephalus pusillus pusillus) kept in a zoo in Japan.

The larval form of the Phyllobothriidea cestode was found in the blubber of a Cape fur seal (Arctocephalus pusillus pusillus) from a zoo in Japan. Bladder-bearing larval cestodes with a scolex have been occasionally reported from blubbers of pinnipeds and morphologically identified as Clistobothrium delphini (formerly known as Phyllobothrium delphini) or rarely Clistobothrium grimaldii (Monorygma grimaldii). Although the larvae here morphologically resembled C. delphini, the 28S rDNA sequence was 100% (1,430/1,430 bp) homologous to the registered sequence of C. grimaldii (GenBank Accession No. KU724058). This discrepancy between morphological and molecular analyses confirms the difficulty of identifying C. delphini and C. grimaldii larvae based solely on morphology, and the need for molecular data to elucidate the morphological variations in Clistobothrium parasites.

Beamline commissioning for microscopic measurements with ultraviolet and soft X-ray beam at the upgraded beamline BL-13B of the Photon Factory.

Beamline 13 of the Photon Factory has been in operation since 2010 as a vacuum ultraviolet and soft X-ray undulator beamline for X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), and angle-resolved photoelectron spectroscopy (ARPES) experiments. The beamline and the end-station at branch B have been recently upgraded, enabling microscopic XPS, XAS, and ARPES measurements to be performed. In 2015, a planar undulator insertion device was replaced with an APPLE-II (advanced planar polarized light emitter II) undulator. This replacement allows use of linear, circular, and elliptical polarized light between 48 and 2000 eV with photon intensities of 109-1013 photons s-1. For microscopic measurements, a toroidal post-mirror was renewed to have more focused beam with profile sizes of 78 µm (horizontal) × 15 µm (vertical) and 84 µm × 11 µm at photon energies of 100 and 400 eV, respectively. A high-precision sample manipulator composed of an XYZ translator, a rotary feedthrough, and a newly developed goniometer, which is essential for microscopic measurements, has been used to control a sample specimen in six degrees of freedom, i.e. translation in the X, Y, and Z directions and rotation in the polar, azimuthal, and tilt directions. To demonstrate the performance of the focused beams, one- and two-dimensional XPS and XAS scan measurements of a copper grid have been performed. It was indicated from analysis of XPS and XAS intensity maps that the actual spatial resolution can be determined by the beam size.

A fatal case of a captive snowy owl (Bubo scandiacus) with Haemoproteus infection in Japan.

Parasites of the genus Haemoproteus are vector-borne avian haemosporidia commonly found in bird species of the world. Haemoproteus infections are typically considered relatively benign in birds. However, some Haemoproteus species cause severe disease and mortality, especially for captive birds removed from their original habitat. In September 2018, a captive 15-year-old snowy owl (Bubo scandiacus), kept in a zoological garden of Japan, died subacutely after presenting leg dysfunction. This case showed significantly low PCV and elevated AST, ALT, CK, and LDH values. Many megalomeronts with prominent morphological characteristics of Haemoproteus were observed in the left leg muscles. Those megalomeronts exhibited multilocular structures and were internally filled with merozoites. A new lineage of Haemoproteus was detected by subsequent PCR for the cytochrome b (cytb) gene of avian haemosporidia from DNA extracted from several organ tissues. The detected lineage was classified in the subgenus Parahaemoproteus and was similar to those from the wild birds inhabiting the region including the study area, suggesting that this snowy owl likely acquired its infection from wild birds. This is the first report of a fatal case of a captive bird with a locally transmitted Haemoproteus infection in Japan. We considered the pathogenicity of this infection in conjunction with the clinical course and hematology results. We surmise that snowy owls may be particularly susceptible to infection with Haemoproteus parasites, and warming northern temperatures may exacerbate the overall health of these and other high latitude birds. Further research into the prevalence of Haemoproteus in wild birds near zoological gardens and potential biting midge vectors is necessary for the ex situ conservation of introduced birds.

Development of a high-precision XYZ translator and estimation of beam profile of the vacuum ultraviolet and soft X-ray undulator beamline BL-13B at the Photon Factory.

A high-precision XYZ translator was developed for the microanalysis of electronic structures and chemical compositions on material surfaces by electron spectroscopy techniques, such as photoelectron spectroscopy and absorption spectroscopy, utilizing the vacuum ultraviolet and soft X-ray synchrotron radiation at an undulator beamline BL-13B at the Photon Factory. Using the high-precision translator, the profile and size of the undulator beam were estimated. They were found to strongly depend on the photon energy but were less affected by the polarization direction. To demonstrate the microscopic measurement capability of an experimental apparatus incorporating a high-precision XYZ translator, the homogeneities of an SnO film and a naturally grown anatase TiO2 single crystal were investigated using X-ray absorption and photoemission spectroscopies. The upgraded system can be used for elemental analyses and electronic structure studies at a spatial resolution in the order of the beam size.

In-gap state generated by La-on-Sr substitutional defects within the bulk of SrTiO3.

Local distortion in the conduction pathway has a significant influence on the conducting properties of oxides. The electronic states induced in the band gap of SrTiO3 by La doping were investigated using photoemission spectroscopy (PES) and soft X-ray emission spectroscopy (SXES); moreover, the local distortion in the conduction pathway was examined using extended X-ray absorption fine structure (EXAFS). An itinerant state and a localized state were observed as a metallic state and an in-gap state, respectively, in the PES spectra and as inelastic peaks in the SXES spectra. This implied that the itinerant state and the in-gap state coexisted within the bulk. From EXAFS results, it was observed that La doped into SrTiO3 substituted Sr and locally distorted the conduction pathway. The results showed that some electrons doped by La-on-Sr substitution are trapped/localized by the local distortion in the conduction pathway, whereas the remaining doped electrons itinerate in the pristine conduction pathway with no distortion.

Femtosecond to picosecond transient effects in WSe 2 observed by pump-probe angle-resolved photoemission spectroscopy.

Time-dependent responses of materials to an ultrashort optical pulse carry valuable information about the electronic and lattice dynamics; this research area has been widely studied on novel two-dimensional materials such as graphene, transition metal dichalcogenides (TMDs) and topological insulators (TIs). We report herein a time-resolved and angle-resolved photoemission spectroscopy (TRARPES) study of WSe2, a layered semiconductor of interest for valley electronics. The results for below-gap optical pumping reveal energy-gain and -loss Floquet replica valence bands that appear instantaneously in concert with the pump pulse. Energy shift, broadening, and complex intensity variation and oscillation at twice the phonon frequency for the valence bands are observed at time scales ranging from the femtosecond to the picosecond and beyond. The underlying physics is rich, including ponderomotive interaction, dressing of the electronic states, creation of coherent phonon pairs, and diffusion of charge carriers - effects operating at vastly different time domains.

Angle-Resolved HAXPES Investigation on the Chemical Origin of Adhesion between Natural Rubber and Brass.

Bulk sensitivity of hard X-ray photoelectron spectroscopy (HAXPES) makes this technique suitable for chemical state analysis of bulk and deeply buried interfaces of solid materials. HAXPES is employed in the present study to examine the chemical state of adhesive interfaces between natural rubber and copper-zinc alloy, i.e., brass, while maintaining the adhesion structure in order to understand the chemical mechanism of rubber-to-brass adhesion. Angle-resolved measurements allow to distinguish between chemical species in rubber and those at the adhesive interface. We specially focus on sulfur-containing species because metal sulfides at the interface have been suggested to be crucial for adhesion. Line-shape analysis of S 1s spectra reveals that the interface that exhibits a strong adhesive property is mainly composed of copper sulfides with a predominant amount of CuS. This type of the interfacial chemical state is obtained when a rubber-bonded brass sample is subjected to vulcanization at 170 °C for 10 min. However, prolonged vulcanization leads to a partial dissolution of CuS as well as accumulation of Zn species in the form of ZnO/Zn(OH)2 and ZnS, and as a result, adhesion strength is lowered. The present study paves the way for accurate and detailed discussion on the chemical state of deeply buried interfaces through bulk sensitive in-situ measurements.

A study on the hydrogen activation properties of Ni-based intermetallics: a relationship between reactivity and the electronic state.

In this study, a clear-cut relationship obtained between the d band centre (Cd) of Ni and Ni3M (M = Ge, Nb, Sn, Ta, Ti) intermetallics and their activation energy (Ea) in H2-D2 equilibration provided a strong experimental proof for the d-band theory. The energy of Cd was lowered by the formation of intermetallics, making Ni-H(D) bonding weaker and the Ea lower.

Plane-specific Purkinje cell responses to vertical head rotations in the cat cerebellar nodulus and uvula.

We recorded simple spike (SS) and complex spike (CS) firing of Purkinje cell in the cerebellar nodulus and uvula of awake, head-restrained cats during sinusoidal vertical rotation of the head in four stimulus planes (pitch, roll, and two vertical canal planes). Two SS response types (position- and velocity-types) with response phases close to those of head position and velocity, respectively, were recognized. Optimal response planes and directions for SS and CS of each cell were estimated from the response amplitudes in the four stimulus planes by fitting with a sinusoidal function. The principal findings are as follows: (1) two rostrocaudally oriented functional zones of Purkinje cells can be distinguished; (2) the medially located parasagittal band is active during rotation in the pitch plane; (3) the laterally located band is active during rotation in the roll plane. These two zones are the same as previously reported zones in the cerebellar flocculus active during head rotation in the canal planes in the point that both cerebellar sagittal zones are plane-specific functional zones, suggesting that the anatomical sagittal zones serve as functional plane-specific zones at least in the vestibulocerebellum.

Electron-Hole Recombination Time at TiO2 Single-Crystal Surfaces: Influence of Surface Band Bending.

Photocatalytic activity is determined by the transport property of photoexcited carriers from the interior to the surface of photocatalysts. Because the carrier dynamics is influenced by a space charge layer (SCL) in the subsurface region, an understanding of the effect of the potential barrier of the SCL on the carrier behavior is essential. Here we have investigated the relaxation time of the photoexcited carriers on single-crystal anatase and rutile TiO2 surfaces by time-resolved photoelectron spectroscopy and found that carrier recombination, taking a nanosecond time scale at room temperature, is strongly influenced by the barrier height of the SCL. Under the flat-band condition, which is realized in nanometer-sized photocatalysts, the carriers have a longer lifetime on the anatase surface than the rutile one, naturally explaining the higher photocatalytic activity for anatase than rutile.

The proposal of the locomotive system for capsule endoscopes.

The capsule endoscope authorized in some countries in late years has the advantage of preparing the observation in difficult small intestines in a past endoscope. However, because the promotion mechanism of a capsule endoscope depends only on the peristaltic motion of a digestive organ, the oversight of change to a morbid state is feared. Authors aim at the achievement of a free movement and remote diagnoses in small intestines, and are developing a locomotive system for capsule endoscopes. This paper describes the proposal of the locomotive system with an electromagnetic actuator, and examination of a simulation model for this locomotive system.