Influence of base designs on the manufacturing accuracy of vat-polymerized diagnostic casts using two different technologies.

STATEMENT OF PROBLEM: Diagnostic casts can incorporate different base designs and be manufactured using different vat-polymerization technologies. However, the influence of the interrelation between the base design and the 3D printing technology on the casts' final accuracy remains unclear. PURPOSE: The purpose of this in vitro study was to assess the influence of different base designs of 3D printed casts on the accuracy of 2 vat-polymerization technologies. MATERIAL AND METHODS: A digital maxillary cast was obtained and used to generate 3 different base designs: solid (S group), honeycombed (HC group), and hollow (H group). The HC and H groups were subdivided based on the wall thickness of the cast design, resulting in 2 subgroups with thicknesses of 1 mm (HC1 and H1) and 2 mm (HC2 and H2) (N=100, n=10). Eleven reference cubes were added to each specimen for subsequent measurements. Specimens were manufactured by using 2 vat-polymerization 3D printers: Nextdent 5100 (ND group) and Sonic Mini 4K (SM4K group) and a resin material suitable for both 3D printers (Nextdent Model 2.0). A coordinate measuring machine quantified the linear and 3-dimensional discrepancies between the digital cast and each reference specimen. Trueness was defined as the average absolute dimensional discrepancy between the virtual cast and the specimens produced through additive manufacturing (AM), while precision was delineated as the standard deviation in dimensional discrepancies between the digital cast and the AM specimens. The data were analyzed using the Kruskal-Wallis and Mann-Whitney U pairwise comparison tests (α=.05). RESULTS: For the NextDent group the trueness ranged from 21.83 µm to 28.35 µm, and the precision ranged from 17.82 µm to 37.70 µm. For the Phrozen group, the trueness ranged from 45.15 µm to 64.51 µm, and the precision ranged from 33.51 µm to 48.92 µm. The Kruskal-Wallis test showed significant differences on the x-, y-, and z-axes and in the 3D discrepancy (all P<.001). On the x-axis, the Mann-Whitney U test showed significant differences for the Phrozen group between the H-2 and H-1 groups (P=.001), H-2 and S groups (P<.001), and HC-2 and S groups (P=.012). On the y-axis, significant differences were found in the Phrozen group between the H-2 and H-1 groups (P=.001), the H-2 and S, H-1 and HC-1, and HC-1 and S groups (P<.001), the H-1 and HC-2 groups (P=.007), and the HC-2 and S groups (P=.009). The NextDent group exhibited significant differences, particularly among the HC-1 and H-2 groups (P=.004), H-1 (P=.020), and HC-2 (P=.001) groups; and on the z-axis significant differences were found in the Phrozen group between the H-2 and H-1 and S groups and the HC-2 group and H-1 and S groups (both P<.001). In the NextDent group, significant differences were found between the H-2 and HC-2 (P=.047) and HC-1 (P=.028) groups. For the 3D discrepancy analysis, significant differences were found in the Phrozen group between the H-2 and H-1 and S groups (P<.001), the H-1 and HC-2 groups (P=.001), the S and HC-1 and HC-2 groups (P<.001), and the H-1 and HC-1 groups (P=.002). In the NextDent group, significant differences were observed between the H-2 and HC-1 groups (P=.012). CONCLUSIONS: The accuracy of digital casts depends on the manufacturing trinomial and base design of the casts. The honeycomb and hollow based designs provided the highest accuracy in the NextDent and Phrozen groups respectively for the material polymer tested. All specimens fell in the clinically acceptable range.

Residual Effects of Transgenic Cotton on the Intestinal Microbiota of Dysdercus concinnus.

The interaction among plants, insects, and microbes (PIM) is a determinant factor for the assembly and functioning of natural and anthropic ecosystems. In agroecosystems, the relationships among PIM are based on the interacting taxa, environmental conditions, and agricultural management, including genetically modified (GM) organisms. Although evidence for the unintended effects of GM plants on non-target insects is increasingly robust, our knowledge remains limited regarding their impact on gut microbes and their repercussions on the host's ecology, especially in the wild. In this study, we compared the gut microbial community of Dysdercus concinnus bugs collected on wild cotton (Gossypium hirsutum), with and without insecticidal transgenes (cry1ab/ac), in its center of origin and diversity. By sequencing the V4-V5 region of 16S rRNA, we show differences in the diversity, structure, and topology of D. concinnus gut microbial interactions between specimens foraging cotton plants with and without transgenes. Identifying unintended residual effects of genetic engineering in natural ecosystems will provide first-line knowledge for informed decision-making to manage genetic, ecological, and evolutionary resources. Thus, determining which organisms interact with GM plants and how is the first step toward conserving natural ecosystems with evidence of transgenic introgression.

Effect of milled and lithography-based additively manufactured zirconia (3Y-TZP) on the biological properties of human osteoblasts.

STATEMENT OF PROBLEM: Lithography-based additively manufactured (AM) zirconia has been used to fabricate dental implants and custom barriers for guided bone regeneration procedures. However, studies on the effect of AM zirconia on the biological properties of human osteoblasts are lacking. PURPOSE: The purpose of this in vitro study was to compare the effect of milled and lithography-based AM zirconia on the biological properties of normal human osteoblasts (NHOsts), as well as to compare the chemical composition between the milled and lithography-based AM 3 mol% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP) zirconia. MATERIAL AND METHODS: Three mol percentage yttria-stabilized tetragonal zirconia polycrystal disks (Ø6×2-mm) were fabricated using subtractive milling (Priti multidisc ZrO2 monochrome) (M group) and lithography-based additive manufacturing methods (LithaCon 3Y 210) (AM group) (n=10). NHOsts were exposed to different material extracts (1:1, 1:2, and 1:4) and cytotoxicity, cell migration, cell morphology, and cell attachment biological tests were completed. Additionally, for morphological and chemical analysis, a scanning electronic microscopy with energy-dispersive X-ray analysis (SEM/EDX) evaluation was completed. Data were analyzed by using 1-way ANOVA and the Dunnett test (α=.05). RESULTS: Substantial cell attachment and spreading were observed in both material surfaces. The presence of zirconium was evident in both groups, although the percentage of zirconium in the AM group (64.7%) was slightly higher than in the M group (52.6%). When NHOsts were cultured in the presence of the different material eluates, the M and AM groups exhibited similar NHOst viability and migration rates when compared with untreated cells; no significant differences were found (P>.05). CONCLUSIONS: The lithography-based AM zirconia tested showed adequate cytocompatibility without differences when compared with the milled zirconia (M group) specimens. Slight chemical element composition differences were found between milled and lithography-based AM zirconia.

Implant-Abutment Discrepancy Before and After Acrylic Resin Veneering of Complete-Arch Titanium Frameworks Manufactured Using Milling and Electron Beam Melting Technologies.

PURPOSE: To assess the implant-abutment discrepancy of complete-arch frameworks manufactured using milling and additive electron beam melting (EBM) technologies, before and after acrylic resin veneering application. MATERIALS AND METHODS: A definitive implant cast with six implant replicas was digitized using a laboratory scanner. A software program was used to design an implant-supported framework which was manufactured using milling (M group) and EBM (EBM group) technologies (n = 10). In the M group, titanium milled specimens were fabricated. In the EBM group, titanium EBM specimens were obtained. A coordinate measurement machine (CMM) was used to assess the implant-abutment discrepancy at x-, y-, and z-axed between the specimens and the implant-abutment replicas of the definitive cast. The implant replicas positioned on the lateral incisor positions were not able to be assessed. The 3D gap discrepancy was calculated: 3 D = x 2 + y 2 + z 2 $3D\ = \sqrt {{x^2} + {y^2} + {z^2}}$ . Acrylic resin veneering procedures were finished and the same CMM measurements were completed. Three-way analysis of variance (ANOVA) test was used to analyze the data (α = 0.05). RESULTS: The manufacturing method (df = 1, F = 7.00, p = 0.009) and implant position (df = 3, F = 129.82, p < 0.001) were significant predictors of the x-axis discrepancy. The veneering procedures (df = 1, F = 21.55, p < 0.001) and implant position (df = 3, F = 95.42, p < 0.001) were significant predictors of the y-axis discrepancy. The manufacturing method (df = 1, F = 11.79, p = 0.001) was a significant predictor of the z-axis discrepancy. Lastly, the manufacturing method (df = 1, F = 5.11, p = 0.026), implant position (df = 3, F = 11.36, p < 0.001), and veneering procedures (df = 1, F = 41.56, p < 0.001) were significant predictors of the 3D gap discrepancy in which the manufacturing method explains the 2.37% of variation in the 3D gap discrepancy, the implant position explains the 15.82% of variation in the 3D gap discrepancy, and veneering procedures explain the 19.29% of variation in the 3D gap discrepancy results. CONCLUSIONS: The manufacturing methods, veneering procedures, and implant position influenced the linear implant-abutment discrepancy. The milled technique tested obtained lower linear implant-abutment discrepancy compared with the EBM method evaluated. The acrylic resin veneering procedures increased the implant-abutment discrepancy.

Chemical Composition and Flexural Strength Discrepancies Between Milled and Lithography-Based Additively Manufactured Zirconia.

PURPOSE: To evaluate the chemical composition, flexural strength, and Weibull characteristics of milled and lithography-based additively manufactured (AM) zirconia. MATERIALS AND METHODS: A virtual design of a bar (25×4×2 mm) was completed using a software program. The standard tessellation language file was used to manufacture all the specimens: 3Y-TZP zirconia (Priti multidisc ZrO2 monochrome) milled (M group) and 3Y-TZP zirconia (LithaCon 3Y 210) lithography-based AM (CeraFab System S65 Medical) (AM group) bar specimens (n = 20). The chemical composition of the specimens was determined by using energy dispersive X-ray (EDAX) elemental analysis in a scanning electron microscope. Flexural strength was measured in all specimens using 3-point bend test according to ISO/CD 6872.2 with a universal testing machine (Instron Model 8501). Two-parameter Weibull distribution values were calculated. The Shapiro-Wilk test revealed that the data were normally distributed (p < 0.05). Flexural strength values were analyzed using independent Student's t-test (α = 0.05). RESULTS: There were no major chemical composition differences observed between M and AM groups. The AM specimens (1518.9 ± 253.9 MPa) exhibited a significantly higher flexural strength mean value compared to the milled (980.5 ± 130.3 MPa) specimens (DF = 13, T-value = -5.97, p < 0.001). The Weibull distribution presented the highest shape for M specimens (11.49) compared to those of AM specimens (6.95). CONCLUSIONS: There was no significant difference in the chemical composition of milled and AM zirconia material tested. AM zirconia tested exhibited significantly higher flexural strength compared with the milled zirconia evaluated.

Síndrome DRESS asociado a fenitoína: informe de caso / DRESS syndrome associated with phenytoin: case report

El síndrome DRESS es una reacción adversa dermatológica que puede presentarse debido a diversos medicamentos, y constituye uno de los diagnósticos más importantes por encima del síndrome de Stevens-Johnson. Se trata de un caso relacionado con una reacción adversa de muy baja frecuencia, que está documentada en la literatura científica, a varios medicamentos, entre ellos la fenitoína. Por lo mencionado, la publicación de estos casos resulta escasa y limitada. Las principales preocupaciones del paciente relacionadas con su cuadro clínico radicaban en el gran compromiso cutáneo que lo llevó a hospitalización, dolor e incomodidad, por el cual recurrió al manejo tópico generalizado con vaselina. Los hallazgos clínicos relevantes fueron: eosinofilia severa, ulceraciones cutáneas, hepatitis química y fiebre. Con los hallazgos del cuadro clínico y la evaluación de la escala RegiSCAR se hace el diagnóstico de síndrome DRESS inducido por fenitoína. Se suspende la fenitoína, se inicia levetiracetam y se administran corticosteroides y acetaminofén con evolución favorable. (AU)

DRESS syndrome is a dermatological adverse reaction can occur due to various medications, being one of the most important diagnoses above Steven-Johnson syndrome. This is a case related to a very low frequency adverse reaction that is documented in the scientific literature to several medicines among those, the phenytoin. Therefore, the publication of these cases is scarce and limited. The main concerns of the patients related to their clinical picture were due to the great cutaneous compromise that lead to hospitalization, pain and discomfort for which they resorted to generalized topical management with vaseline (petrolatum). Relevant clinical findings were severe eosinophilia, skin ulcerations, chemical hepatitis and fever. With clinical picture findings and evaluation of the RegiSCAR scale, the diagnosis of Phenytoin-induced DRESS syndrome is made. Phenytoin is discontinued, levetiracetam is started and corticosteroids and acetaminophen are administrated with favorable evolution. (AU)

Discrepancy at the implant abutment-prosthesis interface of complete-arch cobalt-chromium implant frameworks fabricated by additive and subtractive technologies before and after ceramic veneering.

STATEMENT OF PROBLEM: Selective laser melting additive manufacturing (AM) technologies can be used to fabricate complete-arch cobalt-chromium (Co-Cr) implant-supported prostheses. However, the discrepancy at the implant-prosthesis interface with these fabrication techniques and after ceramic veneering remains unclear. PURPOSE: The purpose of the present in vitro investigation was to measure the discrepancy at the implant abutment-prosthesis interface before and after the ceramic veneering of frameworks fabricated by using subtractive and selective laser melting AM technologies. MATERIAL AND METHODS: A completely edentulous cast with 6 implant abutment replicas (Multi-unit Abutment RP Replicas; Nobel Biocare Services AG) was prepared. A total of 20 Co-Cr frameworks were fabricated using subtractive or computer numerical control milling (CNC group) and additive (AM group) technologies (n=10). A coordinate measurement machine was used to measure the linear and angular discrepancy at the implant abutment-prosthesis interface. Subsequently, a ceramic veneer was applied to each framework following the same standardized protocol. A bonding layer (Chromium-Cobalt Bonding; Bredent), 2 opaquer layers (Powder opaque and liquid UF; Creation CC), a layer of dentin ceramic (Dentine A3; Creation CC), a layer of enamel ceramic (Enamel S-59; Creation CC), and a glaze layer (Glaze paste and Liquid GL; Creation CC) were applied following the manufacturer's firing protocol. Coordinate measurement machine assessment was repeated to measure the linear and angular discrepancies after ceramic veneering procedures. Data were analyzed by using the Wilcoxon signedrank and Mann-Whitney U tests (α=.05). RESULTS: No statistically significant differences (P>.05) were demonstrated in assessing the discrepancies at the implant abutment-prosthesis interface between the groups except for the XZ angle of the CNC group (P<.05). Ceramic techniques produced significantly higher linear and angular discrepancies in both groups (P<.001) with a mean ±standard deviation increase in the 3-dimensional gap of 36.9 ±15.6 µm in the CNC group and 38.9 ±16.6 µm in the AM group. The AM group presented significantly higher discrepancy in the x-axis than the CNC group (P<.001). CONCLUSIONS: Manufacturing procedures did not significantly influence the discrepancy at the implant abutment-prosthesis interface, which was significantly increased after ceramic veneering, except for the XZ angle of the CNC group. The differences between the discrepancies at the implant abutment-prosthesis interface before and after ceramic application revealed no significant discrepancies among the groups, except in the AM group that presented a significantly higher discrepancy on the x-axis compared with the CNC group.

Maxillary zirconia and mandibular composite resin-lithium disilicate-modified PEEK fixed implant-supported restorations for a completely edentulous patient with an atrophic maxilla and mandible: A clinical report.

Bimaxillary implant-supported restorations for edentulous patients must include a comprehensive diagnosis, treatment plan, and careful selection of the restorative materials. The present clinical report described a completely edentulous patient rehabilitated with a zirconia framework with a facial ceramic veneer on the maxillary arch and a modified polyetheretherketone (PEEK) framework with gingival composite resin and cemented lithium disilicate crowns on the mandibular arch. The rationale for this combination of restorative materials is reviewed.

Implementación de NeoKissEs en España: un sistema validado de vigilancia de la sepsis nosocomial en recién nacidos de muy bajo peso / mplementation of NeoKissEs in Spain: A validated surveillance system for nosocomial sepsis in very low birth weight infants

Antecedentes: Las sepsis son las infecciones nosocomiales más frecuentes en las Unidades de Cuidados Intensivos Neonatales (UCIN), afectando especialmente a los recién nacidos de muy bajo peso al nacer (RNMBP, ≤ 1.500 g). Un sistema de vigilancia epidemiológica puede contribuir a su prevención mediante una evaluación continua de su frecuencia y factores de riesgo asociados. El objetivo de este artículo es describir la implementación del sistema de vigilancia de las sepsis nosocomiales en RNMBP (NeoKissEs) en un grupo de UCIN españolas. Métodos: Estudio de cohorte de RNMBP con < 28 días de edad ingresados en las UCIN participantes. Dos UCIN tradujeron y adaptaron materiales a partir del sistema original alemán NEO-KISS. Durante la implementación, se desarrollaron 8talleres formativos, con participación de 210 profesionales. Se creó un sistema web para la introducción de datos de pacientes y episodios de sepsis, su monitorización, análisis comparativo y retroalimentación a las unidades. En cada UCIN, un neonatólogo fue responsable de la implementación, recogiendo información sobre las dificultades percibidas durante el proceso. Resultados: De 50 unidades que aceptaron participar, 45 utilizaron NeoKissEs durante la fase de implementación, registrando 1.108 episodios de sepsis asociados a catéter vascular en 3.638 neonatos, con una tasa de 18,4 episodios por 1.000 pacientes-día con catéter (IC del 95%: 17,8-19,1). Conclusiones: El sistema de vigilancia epidemiológica NeoKissEs representa una fuente útil de información para la comparación estandarizada de la incidencia de sepsis de las UCIN, evaluar factores de riesgo y facilitar la evaluación del efecto de futuras intervenciones preventivas

Background: Bloodstream infections (BSIs) are the most frequent nosocomial infections in neonatal intensive care units (NICUs), especially in very low birth weight (VLBW) infants (birth weight ≤ 1500 g). An epidemiologic surveillance system may contribute to the prevention of infection by continuous monitoring of its frequency and associated risk factors. The aim of this article was to describe the implementation of the NeoKissEs surveillance system for BSIs in VLBW newborns in a group of Spanish NICUs. Methods: We assessed the clinical cohort consisting of all VLBW newborns aged less than 28 days admitted to the participating units. In the pilot phase, 2NICUs translated and adapted materials from the original German NEO-KISS system. During implementation, 210 health care professionals attended one of 8 educational workshops. A web-based system was created that allows entering data regarding patients and BSI episodes, data monitoring, benchmarking and providing feedback to the units. At each NICU, one neonatologist was responsible for the implementation of the system and reporting the difficulties perceived throughout the process. Results: Out of the 50 units that agreed to participate, 45 successfully started using the surveillance platform during the implementation phase, recording 1108 episodes of catheter-associated BSI (CABSI) in 3638 newborns, and finding an overall rate of CABSI of 18.4 (95% CI, 17.8-19.1) per 1000 catheter days. Conclusions: The NeoKissEs surveillance system constitutes a helpful source of information for the purpose of benchmarking the performance of neonatal units, assessing factors associated with BSI in VLBW infants and measuring the impact of future preventive interventions in NICUs

[Implementation of NeoKissEs in Spain: A validated surveillance system for nosocomial sepsis in very low birth weight infants]. / Implementación de NeoKissEs en España: un sistema validado de vigilancia de la sepsis nosocomial en recién nacidos de muy bajo peso.

BACKGROUND: Bloodstream infections (BSIs) are the most frequent nosocomial infections in neonatal intensive care units (NICUs), especially in very low birth weight (VLBW) infants (birth weight ≤ 1500g). An epidemiologic surveillance system may contribute to the prevention of infection by continuous monitoring of its frequency and associated risk factors. The aim of this article was to describe the implementation of the NeoKissEs surveillance system for BSIs in VLBW newborns in a group of Spanish NICUs. METHODS: We assessed the clinical cohort consisting of all VLBW newborns aged less than 28 days admitted to the participating units. In the pilot phase, 2NICUs translated and adapted materials from the original German NEO-KISS system. During implementation, 210 health care professionals attended one of 8 educational workshops. A web-based system was created that allows entering data regarding patients and BSI episodes, data monitoring, benchmarking and providing feedback to the units. At each NICU, one neonatologist was responsible for the implementation of the system and reporting the difficulties perceived throughout the process. RESULTS: Out of the 50 units that agreed to participate, 45 successfully started using the surveillance platform during the implementation phase, recording 1108 episodes of catheter-associated BSI (CABSI) in 3638 newborns, and finding an overall rate of CABSI of 18.4 (95% CI, 17.8-19.1) per 1000 catheter days. CONCLUSIONS: The NeoKissEs surveillance system constitutes a helpful source of information for the purpose of benchmarking the performance of neonatal units, assessing factors associated with BSI in VLBW infants and measuring the impact of future preventive interventions in NICUs.

The Mating System of the Wild-to-Domesticated Complex of Gossypium hirsutum L. Is Mixed.

The domestication syndrome of many plants includes changes in their mating systems. The evolution of the latter is shaped by ecological and genetic factors that are particular to an area. Thus, the reproductive biology of wild relatives must be studied in their natural distribution to understand the mating system of a crop species as a whole. Gossypium hirsutum (upland cotton) includes both domesticated varieties and wild populations of the same species. Most studies on mating systems describe cultivated cotton as self-pollinated, while studies on pollen dispersal report outcrossing; however, the mating system of upland cotton has not been described as mixed and little is known about its wild relatives. In this study we selected two wild metapopulations for comparison with domesticated plants and one metapopulation with evidence of recent gene flow between wild relatives and the crop to evaluate the mating system of cotton's wild-to-domesticated complex. Using classic reproductive biology methods, our data demonstrate that upland cotton presents a mixed mating system throughout the complex. Given cotton's capacity for outcrossing, differences caused by the domestication process in cultivated individuals can have consequences for its wild relatives. This characterization of the diversity of the wild relatives in their natural distribution, as well as their interactions with the crop, will be useful to design and implement adequate strategies for conservation and biosecurity.

Position Accuracy of Implant Analogs on 3D Printed Polymer versus Conventional Dental Stone Casts Measured Using a Coordinate Measuring Machine.

PURPOSE: To compare the accuracy of implant analog positions on complete edentulous maxillary casts made of either dental stone or additive manufactured polymers using a coordinate measuring machine (CMM). MATERIAL AND METHODS: A completely edentulous maxillary model of a patient with 7 implant analogs was obtained. From this model, two types of casts were duplicated, namely conventional dental stone (CDS) using a custom tray impression technique after splinting (N = 5) and polymer cast using additive manufacturing based on the STL file generated. Polymer casts (N = 20; n = 5 per group) were fabricated using 4 different additive manufacturing technologies (multijet printing-MJP1, direct light processing-DLP, stereolithography-SLA, multijet printing-MJP2). CMM was used to measure the correct position of each implant, and distortion was calculated for each system at x-, y-, and z-axes. Measurements were repeated 3 times per specimen in each axis yielding a total of 546 measurements. Data were analyzed using ANOVA, Sheffé tests, and Bonferroni correction (α = 0.05). RESULTS: Compared to CMM, the mean distortion (µm) ranged from 22.7 to 74.9, 23.4 to 49.1, and 11.0 to 85.8 in the x-, y-, and z-axes, respectively. CDS method (x-axis: 37.1; z-axis: 27.62) showed a significant difference compared to DLP on the x-axis (22.7) (p = 0.037) and to MJP1 on the z-axis (11.0) (p = 0.003). Regardless of the cast system, x-axes showed more distortion (42.6) compared to y- (34.6) and z-axes (35.97). Among additive manufacturing technologies, MJP2 presented the highest (64.3 ± 83.6), and MJP1 (21.57 ± 16.3) and DLP (27.07 ± 20.23) the lowest distortion, which was not significantly different from CDS (32.3 ± 22.73) (p > 0.05). CONCLUSION: For the fabrication of the definitive casts for implant prostheses, one of the multijet printing systems and direct light processing additive manufacturing technologies showed similar results to conventional dental stone. CLINICAL SIGNIFICANCE: Conventional dental stone casts could be accurately duplicated using some of the additive manufacturing technologies tested.

Increased glycolipid storage produced by the inheritance of a complex intronic haplotype in the α-galactosidase A (GLA) gene.

BACKGROUND: Accumulation of galactosphingolipids is a general characteristic of Fabry disease, a lysosomal storage disorder caused by the deficient activity of α-galactosidase A encoded by the GLA gene. Although many polymorphic GLA haplotypes have been described, it is still unclear whether some of these variants are causative of disease symptoms. We report the study of an inheritance of a complex intronic haplotype (CIH) (c.-10C > T, c.369 + 990C > A, c.370-81_370-77delCAGCC, c.640-16A > G, c.1000-22C > T) within the GLA gene associated with Fabry-like symptoms and galactosphingolipid accumulation. We analysed α-Gal A activity in plasma, leukocytes and skin fibroblasts in patients, and measured accumulation of galactosphingolipids by enzymatic methods and immunofluorescence techniques. Additionally, we evaluated GLA expression using quantitative PCR, EMSA, and cDNA cloning. RESULTS: CIH carriers had an altered GLA expression pattern, although most of the carriers had high residual enzyme activity in plasma, leukocytes and in skin fibroblasts. Nonetheless, CIH carriers had significant galactosphingolipid accumulation in fibroblasts in comparison with controls, and also glycolipid deposits in renal tubules and glomeruli. EMSA assays indicated that the c.-10C > T variant in the promoter affected a nuclear protein binding site. CONCLUSIONS: Thus, inheritance of the CIH caused an mRNA deregulation altering the GLA expression pattern, producing a tissue glycolipid storage.

A genetic variant in the LDLR promoter is responsible for part of the LDL-cholesterol variability in primary hypercholesterolemia.

BACKGROUND: GWAS have consistently revealed that LDLR locus variability influences LDL-cholesterol in general population. Severe LDLR mutations are responsible for familial hypercholesterolemia (FH). However, most primary hypercholesterolemias are polygenic diseases. Although Cis-regulatory regions might be the cause of LDL-cholesterol variability; an extensive analysis of the LDLR distal promoter has not yet been performed. We hypothesized that genetic variants in this region are responsible for the LDLR association with LDL-cholesterol found in GWAS. METHODS: Four-hundred seventy-seven unrelated subjects with polygenic hypercholesterolemia (PH) and without causative FH-mutations and 525 normolipemic subjects were selected. A 3103 pb from LDLR (-625 to +2468) was sequenced in 125 subjects with PH. All subjects were genotyped for 4 SNPs (rs17242346, rs17242739, rs17248720 and rs17249120) predicted to be potentially involved in transcription regulation by in silico analysis. EMSA and luciferase assays were carried out for the rs17248720 variant. Multivariable linear regression analysis using LDL-cholesterol levels as the dependent variable were done in order to find out the variables that were independently associated with LDL-cholesterol. RESULTS: The sequencing of the 125 PH subjects did not show variants with minor allele frequency ≥ 10%. The T-allele from g.3131C > T (rs17248720) had frequencies of 9% (PH) and 16.4% (normolipemic), p < 0.00001. Studies of this variant with EMSA and luciferase assays showed a higher affinity for transcription factors and an increase of 2.5 times in LDLR transcriptional activity (T-allele vs C-allele). At multivariate analysis, this polymorphism with the lipoprotein(a) and age explained ≈ 10% of LDL-cholesterol variability. CONCLUSION: Our results suggest that the T-allele at the g.3131 T > C SNP is associated with LDL-cholesterol levels, and explains part of the LDL-cholesterol variability. As a plausible cause, the T-allele produces an increase in LDLR transcriptional activity and lower LDL-cholesterol levels.

Smurf1 knocked-down, mesenchymal stem cells and BMP-2 in an electrospun system for bone regeneration.

A sandwich-like system, fabricated with electrospun, poly(lactic-co-glycolic-acid) (PLGA) membranes incorporating either human recombinant bone morphogenetic protein 2 (BMP-2) enriched microspheres, rat bone marrow mesenchymal stem cells (rMSC), or rMSC with their Smurf1 (SMAD ubiquitin regulatory factor-1) expression knocked down by means of siRNA (rMSC573) at varying densities was evaluated in a rat calvarial, critical-size defect. The behavior of four membrane varieties, fabricated with different PLGA copolymers, was initially studied in rMSC cultures to decide on optimal membrane degradation and cell proliferation and differentiation characteristics. PLGA75:25 provided the most stable structure, and favored the cell environment. Radiological and histological analyses indicated bone repair in animals treated with the PLGA75:25 bioactivated systems. We found no synergist interaction between BMP-2 and rMSC 8 to 12 weeks postimplantation. By contrast, synergistic defect repair of around 85% was detected after 8 weeks of combined BMP-2 and rMSC573 treatment.

Role of BMPs in the regulation of sclerostin as revealed by an epigenetic modifier of human bone cells.

Sclerostin, encoded by the SOST gene, is specifically expressed by osteocytes. However osteoblasts bear a heavily methylated SOST promoter and therefore do not express SOST. Thus, studying the regulation of human SOST is challenged by the absence of human osteocytic cell lines. Herein, we explore the feasibility of using the induction of SOST expression in osteoblasts by a demethylating agent to study the mechanisms underlying SOST transcription, and specifically, the influence of bone morphogenetic proteins (BMPs). Microarray analysis and quantitative PCR showed that AzadC up-regulated the expression of several BMPs, including BMP-2, BMP-4 and BMP-6, as well as several BMP downstream targets. Recombinant BMP-2 increased the transcriptional activity of the SOST promoter cloned into a reporter vector. Likewise, exposing cells transfected with the vector to AzadC also resulted in increased transcription. On the other hand, inhibition of the canonical BMP signaling blunted the effect of AzadC on SOST. These results show that the AzadC-induced demethylation of the SOST promoter in human osteoblastic cells may be a valuable tool to study the regulation of SOST expression. As a proof of concept, it allowed us to demonstrate that BMPs stimulate SOST expression by a mechanism involving BMPR1A receptors and downstream Smad-dependent pathways.

Nuclear receptor NR5A2 and bone: gene expression and association with bone mineral density.

OBJECTIVE: There is growing evidence for a link between energy and bone metabolism. The nuclear receptor subfamily 5 member A2 (NR5A2) is involved in lipid metabolism and modulates the expression of estrogen-related genes in some tissues. The objective of this study was to explore the influence of NR5A2 on bone cells and to determine whether its allelic variations are associated with bone mineral density (BMD). DESIGN: Analyses of gene expression by quantitative PCR and inhibition of NR5A2 expression by siRNAs were used to explore the effects of NR5A2 in osteoblasts. Femoral neck BMD and 30 single nucleotide polymorphisms (SNPs) were first analyzed in 935 postmenopausal women and the association of NR5A2 genetic variants with BMD was explored in other 1284 women in replication cohorts. RESULTS: NR5A2 was highly expressed in bone. The inhibition of NR5A2 confirmed that it modulates the expression of osteocalcin, osteoprotegerin, and podoplanin in osteoblasts. Two SNPs were associated with BMD in the Spanish discovery cohort (rs6663479, P=0.0014, and rs2816948, P=0.0012). A similar trend was observed in another Spanish cohort, with statistically significant differences across genotypes in the combined analysis (P=0.03). However, the association in a cohort from the United States was rather weak. Electrophoretic mobility assays and studies with luciferase reporter vectors confirmed the existence of differences in the binding of nuclear proteins and the transcriptional activity of rs2816948 alleles. CONCLUSIONS: NR5A2 modulates gene expression in osteoblasts and some allelic variants are associated with bone mass in Spanish postmenopausal women.

Osseointegrated implants as orthodontic anchorage and restorative abutments in the treatment of partially edentulous adult patients.

One of the main limitations of orthodontic treatment in partially edentulous patients is the lack of anchorage to obtain desirable tooth movement. Coordination between the orthodontist, periodontist, and restorative practitioner is essential when planning treatment for these patients. Implants can be used not only in the definitive prosthetic solution but can also be of great benefit as stable abutments during orthodontic therapy. For ideal results, it is essential to establish an orthodontically favorable position for an implant and, more importantly, the best position for an adequate restoration following orthodontic treatment. The aim of this article is to demonstrate the use of implants in orthodontic movement to provide easier and more predictable restorative treatment.