Molecular Layer Deposition of Polyurea on Silica Nanoparticles and Its Application in Dielectric Nanocomposites.

Polymer nanocomposites (NCs) offer outstanding potential for dielectric applications including insulation materials. The large interfacial area introduced by the nanoscale fillers plays a major role in improving the dielectric properties of NCs. Therefore, an effort to tailor the properties of these interfaces can lead to substantial improvement of the material's macroscopic dielectric response. Grafting electrically active functional groups to the surface of nanoparticles (NPs) in a controlled manner can yield reproducible alterations in charge trapping and transport as well as space charge phenomena in nanodielectrics. In the present study, fumed silica NPs are surface modified with polyurea from phenyl diisocyanate (PDIC) and ethylenediamine (ED) via molecular layer deposition (MLD) in a fluidized bed. The modified NPs are then incorporated into a polymer blend based on polypropylene (PP)/ethylene-octene-copolymer (EOC), and their morphological and dielectric properties are investigated. We demonstrate the alterations in the electronic structure of silica upon depositing urea units using density functional theory (DFT) calculations. Subsequently, the effect of urea functionalization on the dielectric properties of NCs is studied using thermally stimulated depolarization current (TSDC) and broadband dielectric spectroscopy (BDS) methods. The DFT calculations reveal the contribution of both shallow and deep traps upon deposition of urea units onto the NPs. It could be concluded that the deposition of polyurea on NPs results in a bi-modal distribution of trap depths that are related to each monomer in the urea units and can lead to a reduction of space charge formation at filler-polymer interfaces. MLD offers a promising tool for tailoring the interfacial interactions in dielectric NCs.

Gas Phase Modification of Silica Nanoparticles in a Fluidized Bed: Tailored Deposition of Aminopropylsiloxane.

Functionalized nanoparticles have various applications, for which grafting of a chemical moiety onto the surface to induce/improve certain properties is needed. When incorporated in polymeric matrices, for instance, the modified nanoparticles can alter the interfacial characteristics leading to improvements ofthe macroscopic properties of the nanocomposites. The extent of these improvements is highly dependent on the thickness, morphology and conformity of the grafted layer. However, the common liquid-phase modification methods provide limited control over these factors. A novel gas-phase modification process was utilized, with 3-aminopropyltriethoxysilane (APTES) as precursor, to chemically deposit amino-terminated organic layers on fumed silica nanoparticles in a fluidized bed. A self-limiting surface saturation was achieved when the reaction was done at 200 °C. With this self-limiting feature, we were able to graft multiple layers of aminopropylsiloxane (APS) onto the silica nanoparticles using water as the coreactant. The feasibility of this process was analyzed using thermogravimetric analysis (TGA), diffuse reflectance IR Fourier transform spectroscopy (DRIFTS), X-ray photoelectron spectroscopy (XPS), and elemental analysis (EA). By altering the number of APTES/water cycles, it was possible to control the thickness and conformity of the deposited aminopropylsiloxane layer. This novel approach allows to engineer the surface of nanoparticles, by introducing versatile functionalized layers in a controlled manner.

Surface Modification of Fumed Silica by Plasma Polymerization of Acetylene for PP/POE Blends Dielectric Nanocomposites.

Novel nanocomposites for dielectric applications-based polypropylene/poly(ethylene-co-octene) (PP/POE) blends filled with nano silica are developed in the framework of the European 'GRIDABLE' project. A tailor-made low-pressure-plasma reactor was applied in this study for an organic surface modification of silica. Acetylene gas was used as the monomer for plasma polymerization in order to deposit a hydrocarbon layer onto the silica surface. The aim of this modification is to increase the compatibility between silica and the PP/POE blends matrix in order to improve the dispersion of the filler in the polymer matrix and to suppress the space charge accumulation by altering the charge trapping properties of these silica/PP/POE blends composites. The conditions for the deposition of the acetylene plasma-polymer onto the silica surface were optimized by analyzing the modification in terms of weight loss by thermogravimetry (TGA). X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray fluorescence spectroscopy (EDX) measurements confirmed the presence of hydrocarbon compounds on the silica surface after plasma modification. The acetylene plasma modified silica with the highest deposition level was selected to be incorporated into the PP/POE blends matrix. X-ray diffraction (XRD) showed that there is no new crystal phase formation in the PP/POE blends nanocomposites after addition of the acetylene plasma modified silica. Differential scanning calorimetry results (DSC) show two melting peaks and two crystallization peaks of the PP/POE blends nanocomposites corresponding to the PP and POE domains. The improved dispersion of the silica after acetylene plasma modification in the PP/POE blends matrix was shown by means of SEM-EDX mapping. Thermally stimulated depolarization current (TSDC) measurements confirm that addition of the acetylene plasma modified silica affects the charge trapping density and decreases the amount of injected charges into PP/POE blends nanocomposites. This work shows that acetylene plasma modification of the silica surface is a promising route to tune charge trapping properties of PP/POE blend-based nanocomposites.

Comparison and electrical modeling of new polymeric cellular electrets.

A new family of cellular polymers-that, upon appropriate charging, reveals interesting piezoelectric properties-has been developed recently. Its major characteristic is thermal stability up to high temperatures, which broadens the potential field of application. These materials become electrets upon charging under high levels of electric field. Investigation of charging mechanisms is fundamental to reach optimization of electret and piezoelectric properties. This paper presents results and considerations relevant to contact charging of these new materials, pointing out the relation between partial discharge and space charge formation, as well as time and temperature stability of electret properties. The concepts of threshold for partial discharge inception and space charge accumulation, the modeling of avalanches in cavities, and the rate of charge generation are exploited trying to explain charging mechanism and, therefore, they provide useful indication for optimization of material manufacturing.