Room-Temperature Superprotonic Conductivity beyond 10-1 S cm-1 in a Co(II) Coordination Polymer.

An efficient design of crystalline solid-state proton conductors (SSPCs) is crucial for the progress of clean energy applications. Developing such materials to make them work at room temperature with a conductivity of ≥10-1 S cm-1 is of significant interest in terms of technical and commercial aspects. Utilizing the recently highlighted "coordinated-water-driven proton conduction" approach, herein, we have rationally synthesized two highly stable and scalable 1D Co(II) coordination polymers (CPs) as SSPCs, PCM-2 {[Co(bpy)(H2O)2(NO3)2]·H2O}n and PCM-3 {[Co2(bpy)2(SO4)2(H2O)6].4H2O}n, with distinct alignments in coordinated water and coordinated oxo-anions (nitrate and sulfate, respectively). The acidity of the metal-bound water molecules in PCM-2 is further enhanced through cooperative long-range continuous H bonds with coordinated Brønsted basic nitrates (proton acceptors), leading to ultrahigh superprotonic conductivities even at 25 °C (1.03 × 10-1 S cm-1 under 95% RH), and reached a maximum of 2.99 × 10-1 S cm-1 at 85 °C (95% RH). The conductivity at 25 °C is even higher than that of commercial Nafion 117 (6.74 × 10-2 S cm-1 at 100% RH). The absence of such an H-bonding interaction in PCM-3 (closed loops) resulted in a lesser conductivity of 5.87 × 10-5 S cm-1 (95% RH, 85 °C). PCM-2 represents the first example of SSPC exhibiting conductivity in the order 10-1 S cm-1 at ambient temperature (25 °C) with excellent recyclability.

Two-Dimensional Cu(II)-MOF with Lewis Acid-Base Bifunctional Sites for Chemical Fixation of CO2 and Bioactive 1,4-DHP Synthesis via Hantzsch Condensation.

Five- and six-membered heterocycles containing nitrogen or oxygen have been considered as privileged scaffolds in organic chemistry and the chemical industry because of their usage in high-value commodities. Herein, we report a two-dimensional (2D) Cu(II)-based MOF catalyst, IITKGP-40, via the strategic employment of ample Lewis acid-base bifunctional sites (open metal nodes and free pyrazine moieties) along the pore wall. IITKGP-40 could convert toxic CO2 to cyclic carbonates in an atom-economical manner under solvent-free conditions and aromatic aldehyde to bioactive 1,4-DHPs via Hantzsch condensation. Exceptional catalytic performance (99%) and turnover number under mild reaction conditions for CO2 fixation using sterically hindered styrene oxide, and good-to-excellent yields for a wide range of aromatic aldehydes toward 1,4-dihydropyridines (1,4-DHPs) make IITKGP-40 promising as a multipurpose heterogeneous catalyst. Moreover, to demonstrate the practical utility of the catalyst, two biologically important drug molecules, diludine and nitrendipine analogue, have also been synthesized. IITKGP-40 is recyclable for at least three consecutive runs without significant loss of activity, making it promising for real-time applications.

Potential of a pH-Stable Microporous MOF for C2H2/C2H4 and C2H2/CO2 Gas Separations under Ambient Conditions.

Cost-effective adsorption-based C2H2/C2H4 and C2H2/CO2 gas separations are extremely important in the industry. Herein, a pH-stable three-dimensional (3D) metal-organic framework (MOF), IITKGP-25, possessing exposed functional sites is presented, which facilitates such separations with excellent ideal adsorbed solution theory (IAST) selectivity (4.61 for C2H2/C2H4 and 3.93 for C2H2/CO2) under ambient conditions (295 K, 100 kPa, 50:50 gas mixtures) and a moderate affinity toward C2H2 (26.6 kJ mol-1). Interestingly, IITKGP-25 can maintain structural integrity in water and in aqueous acidic/alkaline (pH = 2-10) medium because of the higher coordination numbers around the metal center and the hydrophobicity of the ligand. The adsorption capacity for C2H2 remains unchanged for a minimum of up to five consecutive cycles and 15 days of exposure to 97% relative humidity, which are the prerequisites of an adsorbent for practical gas separation application. Density functional theory (DFT) calculations reveal that the open Cd(II) sites and carboxylate oxygen-coordinated Cd(II) corner of the triangle-shaped one-dimensional (1D) channel are the enthalpically more preferred binding sites for C2H2, which stabilize the adsorbed C2H2 through nonlocal stronger H-bonding and also pπ-dπ and CH-π interactions.

A Highly Selective MOF-Based Probe for Turn-On Luminescent Detection of Al3+, Cr3+, and Fe3+ in Solution and Test Paper Strips through Absorbance Caused Enhancement Mechanism.

Trivalent metal ions (Cr3+, Al3+, and Fe3+) constitute a major section of the environmental pollutants, and their excess accumulation has a detrimental effect on health, so their detection in trace quantity has been a hot topic of research. A highly scalable 3D porous Zn-based luminescent metal-organic framework (MOF) has been synthesized by exploiting the mixed ligand synthesis concept. The strategic selection of an aromatic π-conjugated organic linker and N-rich spacer containing the azine functionality as metal ion binding sites immobilized across the pore spaces, have made this MOF an ideal turn-on sensor for Al3+, Cr3+, and Fe3+ ions with very high sensitivity, selectivity, and recyclability. An in-depth study revealed absorbance caused enhancement mechanism (ACE) responsible for such turn-on phenomena. In order to make the detection process straightforward, convenient, portable, and economically viable, we have fabricated MOF test paper strips (the MOF could be simply immobilized onto the paper strips) for naked eye visual detection under UV light, which, thus, manifests its potential as a real-time smart sensor for these trivalent ions.

pH-Stable Luminescent Metal-Organic Frameworks for the Selective Detection of Aqueous-Phase FeIII and CrVI Ions.

The development of chemically stable metal-organic framework (MOF)-based luminescent platforms for toxic ion detection in an aqueous medium is highly challenging because most of the classical MOFs are prone to water degradation, and that is the reason why most of the MOF-based luminescent sensors use a nonaqueous medium for sensing. In this contribution, we report two new water-stable luminescent MOFs (Zn-MOF-1 and Zn-MOF-2), assembled from a mixed-ligand synthesis approach. Because of the presence of a hydrophobic trifluoromethyl group to the backbone and stronger metal-N coordination, these MOFs exhibit excellent stability not only in water but also in acidic/alkaline aqueous solutions (pH = 3-10). Here, we report a green sensing approach by exploiting the significant reduction in photoluminescence of these MOFs in the presence of toxic ions. Fe3+ and CrO42-/Cr2O72- ions could be traced with a detection limit (LOD) in the micromolar range (0.045 and 0.745/0.33 µM for Zn-MOF-1; 125.2 and 114.2/83.5 µM for Zn-MOF-2). The mechanistic study reveals that competitive absorption of the excitation energy coupled with fluorescent resonance energy transfer are responsible for the turn-off quenching. The anti-interference ability and recyclability along with the pH stability gave these MOFs high potential to be used as practical sensors toward FeIII and CrVI ions in water as a greenest medium.

Porous Anionic Co(II) Metal-Organic Framework, with a High Density of Amino Groups, as a Superior Luminescent Sensor for Turn-on Al(III) Detection.

Accumulation of high concentrations of Al(III) in body has a direct impact on health and therefore, the trace detection of Al(III) has been a matter for substantial concern. An anionic metal organic framework ({[Me2 NH2 ]0.5 [Co(DATRz)0.5 (NH2 BDC)] ⋅ xG}n ; 1; HDATRz=3,5-diamino-1,2,4-triazole, H2 NH2 -BDC=2-amino-1,4-benzenedicarboxylic acid, G=guest molecule) composed of two types of secondary building units (SBU) and channels of varying sizes was synthesized by employing a rational design mixed ligand synthesis approach. Free -NH2 groups on both the ligands are immobilized onto the pore surface of the MOF which acts as a superior luminescent sensor for turn-on Al(III) detection. Furthermore, the large channels could allow the counter-ions to pass through and get exchanged to selectively detect Al(III) in presence of other seventeen metal ions with magnificent luminescence enhancement. The observed limit of detection is as low as 17.5 ppb, which is the lowest among the MOF-based sensors achieved so far. To make this detection approach simple, portable and economic, we demonstrate MOF filter paper test for real time naked eye observation.

Cascade annulative π-extension for the rapid construction of carbazole based polyaromatic hydrocarbons.

A Brønsted acid catalyzed cascade benzannulation strategy for the one-pot synthesis of densely populated poly-aryl benzo[a]carbazole architectures is disclosed from easily affordable fundamental commodities. The efficacy of this technique was further validated via the concise synthesis of structurally unique carbazole based poly-aromatic hydrocarbons. Furthermore, the photo-physical properties of the synthesized compounds are thoroughly investigated.

A "Thermodynamically Stable" 2D Nickel Metal-Organic Framework over a Wide pH Range with Scalable Preparation for Efficient C2 s over C1 Hydrocarbon Separations.

The design and construction of "thermodynamically stable" metal-organic frameworks (MOFs) that can survive in liquid water, boiling water, and acidic/basic solutions over a wide pH range is highly desirable for many practical applications, especially adsorption-based gas separations with obvious scalable preparations. Herein, a new thermodynamically stable Ni MOF, {[Ni(L)(1,4-NDC)(H2 O)2 ]}n (IITKGP-20; L=4,4'-azobispyridine; 1,4-NDC=1,4-naphthalene dicarboxylic acid; IITKGP stands for the Indian Institute of Technology Kharagpur), has been designed that displays moderate porosity with a BET surface area of 218 m2 g-1 and micropores along the [10-1] direction. As an alternative to a cost-intensive, cryogenic, high-pressure distillation process for the separation of hydrocarbons, MOFs have recently shown promise for such separations. Thus, towards an application standpoint, this MOF exhibits a higher uptake of C2 hydrocarbons over that of C1 hydrocarbon under ambient conditions, with one of the highest selectivities based on the ideal adsorbed solution theory (IAST) method. A combination of two strategies (the presence of stronger metal-N coordination of the spacer and the hydrophobicity of the aromatic moiety of the organic ligand) possibly makes the framework highly robust, even stable in boiling water and over a wide range of pH 2-10, and represents the first example of a thermodynamically stable MOF displaying a 2D structural network. Moreover, this material is easily scalable by heating the reaction mixture at reflux overnight. Because such separations are performed in the presence of water vapor and acidic gases, there is a great need to explore thermodynamically stable MOFs that retain not only structural integrity, but also the porosity of the frameworks.

A Phosphate-Based Silver-Bipyridine 1D Coordination Polymer with Crystallized Phosphoric Acid as Superprotonic Conductor.

Phosphate-based silver-bipyridine (Ag-bpy) 1D coordination polymer {[{Ag(4,4'-bpy)}2 {Ag(4,4'-bpy)(H2 PO4 )}]⋅2 H2 PO4 ⋅H3 PO4 ⋅5 H2 O}n (1) with free phosphoric acid (H3 PO4 ), its conjugate base (H2 PO4 - ) and water molecules in its lattice was synthesized by room-temperature crystallization and the hydrothermal method. An XRD study showed that coordinated H2 PO4 - , lattice H2 PO4 - anions, free H3 PO4 and lattice water molecules are interconnected by H-bonding interactions, forming an infinitely extended 2D H-bonded network that facilitates proton transfer. This material exhibits a high proton conductivity of 3.3×10-3  S cm-1 at 80 °C and 95 % relative humidity (RH). Furthermore, synthesis of this material from commercially available starting materials in water can be easily scaled up, and it is highly stable under extreme conditions of conductivity measurements. This report inaugurates the usage and design principle of proton-conducting frameworks based on crystallized phosphoric acid and phosphate.

Three Co(II) Metal-Organic Frameworks with Diverse Architectures for Selective Gas Sorption and Magnetic Studies.

Three Co(II) metal-organic frameworks, namely, {[Co2(L)2(OBA)2(H2O)4]· xG} n (1), {[Co(L)0.5(OBA)]· xG} n (2), and {[Co2(L)2(OBA)2(H2O)]·DMA· xG} n (3) [where L = 2,5-bis(3-pyridyl)-3,4-diaza-2,4-hexadiene, H2OBA = 4,4'-oxybisbenzoic acid, DMF = dimethylformamide, DMA = dimethylacetamide, and G denotes disordered guest molecules], have been synthesized under diverse reaction conditions through self-assembly of a bent dicarboxylate and a linear spacer with a Co(II) ion. While 1 is crystallized at room temperature in DMF to form a 2D layer structure, 2 is formed by the assembly of similar components under solvothermal conditions with a 3D network structure. On the other hand, changing the solvent to DMA, 3 could be crystallized at room temperature with a 3D architecture. Out of the three, activated sample 2 was found to be permanently microporous in nature, with a BET surface area of 385 m2/g, and exhibited moderately high uptake capacity for C2H2 and CO2 while taking up much less CH4 and N2 at ambient conditions. As a result, high ideal adsorbed solution theory (IAST) separation selectivities are obtained for CO2/N2 (15:85), CO2/CH4 (50:50), and C2H2/CH4 (50:50) gas mixtures, making 2 a potential candidate for those important gas separations at ambient conditions. Moreover, the magnetic properties of 1-3 were studied. 1 and 2 show antiferromagnetic interaction between the Co(II) centers, whereas 3 displays ferromagnetic behavior arising from a counter-complementary effect between two types of links among Co(II) centers in 3.

Metalo Hydrogen-Bonded Organic Frameworks (MHOFs) as New Class of Crystalline Materials for Protonic Conduction.

Recently, proton conduction has been a thread of high potential owing to its wide applications in fuel-cell technology. In the search for a new class of crystalline materials for protonic conductors, three metalo hydrogen-bonded organic frameworks (MHOFs) based on [Ni(Imdz)6 ]2+ and arene disulfonates (MHOF1 and MHOF2) or dicarboxylate (MHOF3) have been reported (Imdz=imidazole). The presence of an ionic backbone with charge-assisted H-bonds, coupled with amphiprotic imidazoles made these MHOFs protonic conductors, exhibiting conduction values of 0.75×10-3 , 3.5×10-4 and 0.97×10-3  S cm-1 , respectively, at 80 °C and 98 % relative humidity, which are comparable to other crystalline metal-organic framework, coordination polymer, polyoxometalate, covalent organic framework, and hydrogen-bonded organic framework materials. This report initiates the usage of MHOF materials as a new class of solid-state proton conductors.