Responses of the microbial community and the production of extracellular polymeric substances to sulfamethazine shocks in a novel two-stage biological contact oxidation system.

Introduction: The biological contact oxidation reactor is an effective technology for the treatment of antibiotic wastewater, but there has been little research investigating its performance on the sulfamethazine wastewater treatment. Methods: In this study, a novel two-stage biological contact oxidation reactor was used for the first time to explore the impact of sulfamethazine (SMZ) on the performance, microbial community, extracellular polymeric substances (EPS), and antibiotic-resistant genes (ARGs). Results: The chemical oxygen demand (COD) and ammonia nitrogen (NH4+-N) removal efficiencies kept stable at 86.93% and 83.97% with 0.1-1 mg/L SMZ addition and were inhibited at 3 mg/L SMZ. The presence of SMZ could affect the production and chemical composition of EPS in the biofilm, especially for the pronounced increase in TB-PN yield in response against the threat of SMZ. Metagenomics sequencing demonstrated that SMZ could impact on the microbial community, a high abundance of Candidatus_Promineofilum, unclassified_c__Anaerolineae, and unclassified_c__Betaproteobacteria were positively correlated to SMZ, especially for Candidatus_Promineofilum. Discussion: Candidatus_Promineofilum not only had the ability of EPS secretion, but also was significantly associated with the primary SMZ resistance genes of sul1 and sul2, which developed resistance against SMZ pressure through the mechanism of targeted gene changes, further provided a useful and easy-implement technology for sulfamethazine wastewater treatment.

Residual and ecological risk assessment of heavy metals in fly ash from co-combustion of excess sludge and coal.

Co-combustion of municipal excess sludge (ES) and coal provides an alternative method for disposing ES. The present study aims to investigate the residual and ecological risk of heavy metals in fly ash from co-combustion of ES and coal. The total concentration and speciation distribution of heavy metals, characterization of SEM, EDX, XRD and leaching test were carried out to assess the fly ash in this study. The results showed that the total concentrations of Cu, Zn and Mn were higher than others in fly ash, and most heavy metals were concentrated in fine particles. For Cd, Cr and Pb, the percentages of speciation of F4 and F5 were all over 90%, suggesting the relatively lower leaching toxicity. The leaching percent of all heavy metals was lower than 5% by two diluted HNO3 solutions for fly ash. The potential ecological risks increased with the decrease of particle size of fly ash, and Cd accounted for the main fraction for ecological risk despite of lower concentration in comparison to other measured heavy metals.

Fabrication of novel particle electrode γ-Al2O3@ZIF-8 and its application for degradation of Rhodamine B.

Due to the high Brunauer-Emmett-Teller (BET) surface area of zeolitic imidazolate framework (ZIF)-8, a secondary crystallization method was used to prepare a particle electrode of γ-Al2O3@ZIF-8. According to the results from a field emission scanning electron microscope (SEM) and X-ray diffractometer (XRD), the particle electrode of γ-Al2O3 was successfully loaded with ZIF-8, and the BET surface area (1,433 m2/g) of ZIF-8 was over ten times that of γ-Al2O3. The key operation parameters of cell voltage, pH, initial RhB concentration and electrolyte concentration were all optimized. The observed rate constant (kobs) of the pseudo-first-order kinetic model for the electrocatalytic oxidation (ECO) system with the particle electrode of γ-Al2O3@ZIF-8 (15.2 × 10-2 min-1) was over five times higher than that of the system with the traditional particle electrode of γ-Al2O3 (2.6 × 10-2 min-1). The loading of ZIF-8 on the surface of γ-Al2O3 played an important role in improving electrocatalytic activity for the degradation of Rhodamine B (RhB), and the RhB removal efficiency of the three-dimensional (3D) electrocatalytic system with the particle electrode of γ-Al2O3@ZIF-8 was 93.5% in 15 min, compared with 27.5% in 15 min for the particle electrode of γ-Al2O3. The RhB removal efficiency was kept over 85% after five cycles of reuse for the 3D electrocatalytic system with the particle electrode of γ-Al2O3@ZIF-8.