Photoinduced Puffing with Large Volume Expansion and Photomechanical Motions induced by Topochemical [4+4] Reactions in Molecular Crystal Solvates.

In this work, we report the first example of two crystal solvates of an anthracene-benzhydrazide based molecule (Ant) that display very distinct photo-responsive behaviour when 365 or 405 nm or visible light is illuminated. For the first time, the crystal hydrate that has water molecule in the lattice (hereafter named as Ant-H2O) display fascinating puffing behavior with large volume expansion upto 50 % accompanied with surface modulation when illuminated with 405 nm light, a phenomenon very much similar to the rice or popcorn puffing by thermal treatment. Utilizing the properties of photoconverted Ant-H2O crystals, we have demonstrated their application in photoinduced enhanced liquid absorption using various liquids/solutions. The other crystal solvate having DMF in the crystal lattice (hereafter named as Ant-DMF) responds to 405 nm light by bending, twisting, chopping, jumping or splitting etc. The chopping of Ant-DMF crystal was also observed under ambient/white light but at a slower rate compared to 405 nm light. Single crystal X-ray diffraction study reveals that the photoinduced puffing and photomechanical effects of these materials are rooted to the topochemical [4+4] cycloaddition reaction between the anthracene moieties that facilitate molecular packing change assisted by the reconfiguration of intermolecular non-covalent interactions involving lattice trapped solvent molecules.

Dimension Engineering of Stimuli-Responsive 1D Molecular Crystals into Unusual 2D and 3D Zigzag Waveguides.

We demonstrate an innovative technique to achieve organic 2D and 3D waveguides with peculiar shapes from an acicular, stimuli-responsive molecular crystal, (2Z,2'Z)-3,3'-(anthracene-9,10-diyl)bis(2-(3,5-bis(trifluoromethyl)phenylacrylonitrile), Ant-CF3 . The greenish-yellow fluorescent (FL) Ant-CF3 molecular crystals exhibit laser power-dependent permanent mechanical bending in 2D and 3D. Investigation of a single-crystal using spatially-resolved Raman/FL/electron microscopy, and theoretical calculations revealed photothermal (Z,E)/(E,E) isomerization-assisted transition from crystalline to amorphous phase at the laser-exposed regions. This phenomenon facilitates the dimension engineering of a 1D crystal waveguide into 2D waveguide on a substrate or a 3D waveguide in free space. The bends can be used as interconnection points to couple different optical elements. The presented technique has broader implications in organic photonics and other crystal-related photonic technologies.

Rapid Visual Detection of Amines by Pyrylium Salts for Food Spoilage Taggant.

Amines are ubiquitous in biological world, but are toxic and harmful in nature. Detection of biogenic amines that are released from spoiled seafood, meat, or dairy products is an important task to maintain the quality and safety of these packaged foods. To this endeavor, herein we report pyrylium salts that are capable of sensing various amines by rapid change of fluorescence color or intensity. In molecular level, this change of fluorescence is rooted to the formation of pyridine or analogous product that have distinct optical property. The pyrylium salts are capable of efficiently sensing amine vapors or amine solutions both in solid state and in solution state and thus demonstrating a multiphase sensing platform. Utilizing the excellent sensing property, we have employed our pyrylium compounds as spoilage indicator for food products such as fish, meat or cheese which relies on sensing biogenic amines released from these spoiled foods and provide optical response. Prominent change in visible and luminescence color was observed within 4-18 h of packaging at room temperature (∼33 °C). Considering the rapid response for biogenic amines, these molecular sensors have great potential to be utilized for food packaging industry, medical diagnostics, or other sensory devices.

Inkless Writing and Self-Erasing Security Feature of (Z)-1,2-Diarylacrylonitrile-Based Materials: A Confidential Data Communication.

Development of a novel organic luminescent material for inkless writing, and self-erasing application is a remarkable solution to reduce paper waste, recycling cost in the printing industry. These innovative materials also offer to reduce global warming due to the lower consumption of paper made from plants. To this endeavor, herein we report the design, synthesis and simple material fabrication of a donor-acceptor type (Z)-1,2-diarylacrylonitrile (1) compound, which in solid state displayed highly contrast and reversible vapochromism under the visible light as well as UV light. We found a unique multiphase luminescence switching from green (λmax = 535 nm) to yellow (λmax = 566 nm) and to orange-red (λ = 580, 640 nm) in solid state. This multiphase switching is induced through the gradual exclusion of entrapped DMSO molecules from the crystalline rod-like materials. Utilizing this purely organic material, we have demonstrated reversible inkless writing/printing on a cellulose strip by employing photothermal effect of sunlight in which sunlight acts as an "inkless pen". We were able to print complex designs utilizing this technique, which is invisible in ambient light and brighter in UV light. To our delight, the writing is self-erasable on keeping at sunlight for the prolonged period, upon keeping at ambient temperature, or instantly on warming. This remarkably smart function of our material offers cost-effective and environmentally benign technique for security data communication and confidential data printing.

Distinct Mechanoresponsive Luminescence, Thermochromism, Vapochromism, and Chlorine Gas Sensing by a Solid-State Organic Emitter.

In this study, we report a synthetically simple donor-acceptor (D-A)-type organic solid-state emitter 1 that displays unique fluorescence switching under mechanical stimuli. Orange and yellow emissive crystals of 1 (1O, 1Y) exhibit an unusual "back and forth" fluorescence response to mechanical force. Gentle crushing (mild pressure) of the orange or yellow emissive crystal results in hypsochromic shift to cyan emissive fragments (λem = 498-501 nm) with a large wavelength shift Δλem = -71 to -96 nm, while further grinding results in bathochromic swing to green emissive powder λem = 540-550 nm, Δλem = +40 to 58 nm. Single-crystal X-ray diffraction study reveals that molecules are packed by weak interactions, such as C-H···π, C-H···N, and C-H···F, which facilitate intermolecular charge transfer in the crystal. With the aid of structural, spectroscopic, and morphological studies, we established the interplay between intermolecular and intramolecular charge-transfer interaction that is responsible for this elusive mechanochromic luminescence. Moreover, we have also demonstrated the application of this organic material for chlorine gas sensing in solid state.

Acoustic Emission from Organic Martensites.

In salient effects, still crystals of solids that switch between phases acquire a momentum and are autonomously propelled because of rapid release of elastic energy accrued during a latent structural transition induced by heat, light, or mechanical stimulation. When mechanical reconfiguration is induced by change of temperature in thermosalient crystals, bursts of detectable acoustic waves are generated prior to self-actuation. These observations provide compelling evidence that the thermosalient transitions in organic and organic-containing crystals are molecular analogues of the martensitic transitions in some metals, and metal alloys such as steel and shape-memory alloys. Within a broader context, these results reveal that, akin to metallic bonding, the intermolecular interactions in molecular solids are capable of gradual accrual and sudden release of a substantial amount of strain during anisotropic thermal expansion, followed by a rapid transformation of the crystal packing in a diffusionless, non-displacive transition.

Probing Structural Perturbation in a Bent Molecular Crystal with Synchrotron Infrared Microspectroscopy and Periodic Density Functional Theory Calculations.

The range of unit cell orientations generated at the kink of a bent single crystal poses unsurmountable challenges with diffraction analysis and limits the insight into the molecular-scale mechanism of bending. On a plastically bent crystal of hexachlorobenzene, it is demonstrated here that spatially resolved microfocus infrared spectroscopy using synchrotron radiation can be applied in conjunction with periodic density functional theory calculations to predict spectral changes or to extract information on structural changes that occur as a consequence of bending. The approach reproduces well the observed trends, such as the wall effects, and provides estimations of the vibrational shifts, unit cell deformations, and intramolecular parameters. Generally, expansion of the lattice induces red-shift while compression induces larger blue-shift of the characteristic ν(C-C) and ν(C-Cl) modes. Uniform or non-uniform expansion or contraction of the unit cell of 0.1 Å results in shifts of several cm-1, whereas deformation of the cell of 0.5° at the unique angle causes shifts of <0.5 cm-1. Since this approach does not include parameters related to the actual stimulus by which the deformation has been induced, it can be generalized and applied to other mechanically, photochemically, or thermally bent crystals.

Crystals on the move: mechanical effects in dynamic solids.

When exposed to external stimuli such as heat or light, certain single crystals can acquire momentum and undergo motion. On a molecular scale, the motility of such dynamic single crystals is triggered by a phase transition or chemical reaction without gaseous products, and macroscopically manifests as either slow (reversible or irreversible) deformation, or as rapid, almost instantaneous propulsion of the crystals that is oftentimes accompanied by disintegration. While the elastic energy of the slow reconfiguration processes such as bending, twisting and coiling can be utilized for actuation of other objects, the fast disintegrative processes could be exploited to initiate pressure-sensitive applications. This short review intends to summarize recent developments in the growing research on dynamic crystals, especially aspects of the mechanism of rapid motion of thermosalient and photosalient (leaping) crystals. The collective evidence indicates that these solids are organic-based analogues of the inorganic martensitic materials. While qualitative explanation of the molecular processes that lead to the related dynamic phenomena can be provided, quantification of their kinematics, estimation of the useful work that can be extracted, and prediction of their occurrence are yet to be established. Harnessing the potential of these materials to rapidly and efficiently perform the fundamentally important process of transduction of heat or light into kinetic energy appears as a prospective basis for their application in motion gears and devices.

A switchable self-assembling and disassembling chiral system based on a porphyrin-substituted phenylalanine-phenylalanine motif.

Artificial light-harvesting systems have until now not been able to self-assemble into structures with a large photon capture cross-section that upon a stimulus reversibly can switch into an inactive state. Here we describe a simple and robust FLFL-dipeptide construct to which a meso-tetraphenylporphyrin has been appended and which self-assembles to fibrils, platelets or nanospheres depending on the solvent composition. The fibrils, functioning as quenched antennas, give intense excitonic couplets in the electronic circular dichroism spectra which are mirror imaged if the unnatural FDFD-analogue is used. By slightly increasing the solvent polarity, these light-harvesting fibres disassemble to spherical structures with silent electronic circular dichroism spectra but which fluoresce. Upon further dilution with the nonpolar solvent, the intense Cotton effects are recovered, thus proving a reversible switching. A single crystal X-ray structure shows a head-to-head arrangement of porphyrins that explains both their excitonic coupling and quenched fluorescence.

Strong and Anomalous Thermal Expansion Precedes the Thermosalient Effect in Dynamic Molecular Crystals.

The ability of thermosalient solids, organic analogues of inorganic martensites, to move by rapid mechanical reconfiguration or ballistic event remains visually appealing and potentially useful, yet mechanistically elusive phenomenon. Here, with a material that undergoes both thermosalient and non-thermosalient phase transitions, we demonstrate that the thermosalient effect is preceded by anomalous thermal expansion of the unit cell. The crystal explosion occurs as sudden release of the latent strain accumulated during the anisotropic, exceedingly strong expansion of the unit cell with αa = 225.9 × 10(-6) K(-1), αb = 238.8 × 10(-6) K(-1) and αc = -290.0 × 10(-6) K(-1), the latter being the largest negative thermal expansivity observed for an organic compound thus far. The results point out to the occurence of the thermosalient effect in phase transitions as means to identify new molecular materials with strong positive and/or negative thermal expansion which prior to this work could only be discovered serendipitously.

Perpetually self-propelling chiral single crystals.

When heated, single crystals of enantiomerically pure D- and L-pyroglutamic acid (PGA) are capable of recurring self-actuation due to rapid release of latent strain during a structural phase transition, while the racemate is mechanically inactive. Contrary to other thermosalient materials, where the effect is accompanied by crystal explosion due to ejection of debris or splintering, the chiral PGA crystals respond to internal strain with unprecedented robustness and can be actuated repeatedly without deterioration. It is demonstrated that this superelasticity is attained due to the low-dimensional hydrogen-bonding network which effectively accrues internal strain to elicit propulsion solely by elastic deformation without disintegration. One of the two polymorphs (ß) associated with the thermosalient phase transition undergoes biaxial negative thermal expansion (αa = -54.8(8) × 10(-6) K(-1), αc = -3.62(8) × 10(-6) K(-1)) and exceptionally large uniaxial thermal expansion (αb = 303(1) × 10(-6) K(-1)). This second example of a thermosalient solid with anomalous expansion indicates that the thermosalient effect can be expected for first-order phase transitions in soft crystals devoid of an extended 3D hydrogen-bonding network that undergo strongly anisotropic thermal expansion around the phase transition.

Spatially resolved analysis of short-range structure perturbations in a plastically bent molecular crystal.

The exceptional mechanical flexibility observed with certain organic crystals defies the common perception of single crystals as brittle objects. Here, we describe the morphostructural consequences of plastic deformation in crystals of hexachlorobenzene that can be bent mechanically at multiple locations to 360° with retention of macroscopic integrity. This extraordinary plasticity proceeds by segregation of the bent section into flexible layers that slide on top of each other, thereby generating domains with slightly different lattice orientations. Microscopic, spectroscopic and diffraction analyses of the bent crystal showed that the preservation of crystal integrity when stress is applied on the (001) face requires sliding of layers by breaking and re-formation of halogen-halogen interactions. Application of stress on the (100) face, in the direction where π···π interactions dominate the packing, leads to immediate crystal disintegration. Within a broader perspective, this study highlights the yet unrecognized extraordinary malleability of molecular crystals with strongly anisotropic supramolecular interactions.

Colossal positive and negative thermal expansion and thermosalient effect in a pentamorphic organometallic martensite.

The thermosalient effect is an extremely rare propensity of certain crystalline solids for self-actuation by elastic deformation or by a ballistic event. Here we present direct evidence for the driving force behind this impressive crystal motility. Crystals of a prototypical thermosalient material, (phenylazophenyl)palladium hexafluoroacetylacetonate, can switch between five crystal structures (α-ε) that are related by four phase transitions including one thermosalient transition (α↔γ). The mechanical effect is driven by a uniaxial negative expansion that is compensated by unusually large positive axial expansion (260 × 10(-6) K(-1)) with volumetric expansion coefficients (≈250 × 10(-6) K(-1)) that are among the highest values reported in molecular solids thus far. The habit plane advances at ~10(4) times the rate observed with non-thermosalient transitions. This rapid expansion of the crystal following the phase switching is the driving force for occurrence of the thermosalient effect.

Crystallographic snapshots of the interplay between reactive guest and host molecules in a porous coordination polymer: stereochemical coupling and feedback mechanism of three photoactive centers triggered by UV-induced isomerization, dimerization, and polymerization reactions.

We carried out photopolymerization by [2 + 2] dimerization of a photoreactive guest molecule in the channels of a photoreactive porous coordination polymer. The photoreactions of the guest and two host ligands were monitored by single-crystal X-ray crystallography, providing snapshots of the interplay between the reactive centers. By correlating the structures of these three photocenters, a strong synergism was discovered among three reaction (quasi)equilibria and three types of photochemical reactions (isomerization, dimerization, and polymerization). This result indicates a strong coupling and feedback mechanism among the photocenters moderated by the coordination backbone.

Enhancement of chemical stability and crystallinity in porphyrin-containing covalent organic frameworks by intramolecular hydrogen bonds.

A strong bond: A strategy based on intramolecular hydrogen-binding interactions in 2D covalent organic frameworks (COFs) is shown to improve the crystallinity, porosity, and chemical stability of the material. The concept is validated by removing the hydrogen-bonding interaction in the methoxy analog which showed a lower stability and crystallinity.

Efficient sensitization of dye-sensitized solar cells by novel triazine-bridged porphyrin-porphyrin dyads.

Two novel porphyrin-porphyrin dyads, the symmetrical Zn[Porph]-Zn[Porph] (2) and unsymmetrical Zn[Porph]-H2[Porph] (4), where Zn[Porph] and H2[Porph] are the metalated and free-base forms of 5-(4-aminophenyl)-10,15,20-triphenylporphyrin, respectively, in which two porphyrin units are covalently bridged by 1,3,5-triazine, have been synthesized via the stepwise amination of cyanuric chloride. The dyads are also functionalized by a terminal carboxylic acid group of a glycine moiety attached to the triazine group. Photophysical measurements of 2 and 4 showed broaden and strengthened absorptions in their visible spectra, while electrochemistry experiments and density functional theory calculations revealed negligible interaction between the two porphyrin units in their ground states but appropriate frontier orbital energy levels for use in dye-sensitized solar cells (DSSCs). The 2- and 4-based solar cells have been fabricated and found to exhibit power conversion efficiencies (PCEs) of 3.61% and 4.46%, respectively (under an illumination intensity of 100 mW/cm(2) with TiO2 films of 10 µm thickness). The higher PCE value of the 4-based DSSC, as revealed by photovoltaic measurements (J-V curves) and incident photon-to-current conversion efficiency (IPCE) spectra of the two cells, is attributed to its enhanced short-circuit current (J(sc)) under illumination, high open-circuit voltage (V(oc)), and fill factor (FF) values. Electrochemical impedance spectra demonstrated shorter electron-transport time (τd), longer electron lifetime (τe), and high charge recombination resistance for the 4-based cell, as well as larger dye loading onto TiO2.

Biomimetic crystalline actuators: structure-kinematic aspects of the self-actuation and motility of thermosalient crystals.

While self-actuation and motility are habitual for humans and nonsessile animals, they are hardly intuitive for simple, lifeless, homogeneous objects. Among mechanically responsive materials, the few accidentally discovered examples of crystals that when heated suddenly jump, propelling themselves to distances that can reach thousands of times their own size in less than 1 ms, provide the most impressive display of the conversion of heat into mechanical work. Such thermosalient crystals are biomimetic, nonpolymeric self-actuators par excellence. Yet, due to the exclusivity and incongruity of the phenomenon, as well as because of the unavailability of ready analytical methodology for its characterization, the reasons behind this colossal self-actuation remain unexplained. Aimed at unraveling the mechanistic aspects of the related processes, herein we establish the first systematic assessment of the interplay among the thermodynamic, kinematic, structural, and macroscopic factors driving the thermosalient phenomenon. The collective results are consistent with a latent but very rapid anisotropic unit cell deformation in a two-stage process that ultimately results in crystal explosion, separation of debris, or crystal reshaping. The structural perturbations point to a mechanism similar to phase transitions of the martensitic family.

Meso-substituted porphyrin derivatives via palladium-catalyzed amination showing wide range visible absorption: synthesis and photophysical studies.

In recent years, there has been a growing interest in the design and synthesis of chromophores, which absorb in a wide region of the visible spectrum, as these constitute promising candidates for use as sensitizers in various solar energy conversion schemes. In this work, a palladium-catalyzed coupling reaction was employed in the synthesis of molecular triads in which two porphyrin or boron dipyrrin (BDP) chromophores are linked to the meso positions of a central Zn porphyrin (PZn) ring via an amino group. In the resulting conjugates, which strongly absorb over most of the visible region, the electronic properties of the constituent chromophores are largely retained while detailed emission experiments reveal the energy transfer pathways that occur in each triad.

Electron vs energy transfer in arrays featuring two Bodipy chromophores axially bound to a Sn(IV) porphyrin via a phenolate or benzoate bridge.

In this report we describe the synthesis of multichromophore arrays consisting of two Bodipy units axially bound to a Sn(IV) porphyrin center either via a phenolate (3) or via a carboxylate (6) functionality. Absorption spectra and electrochemical studies show that the Bodipy and porphyrin chromophores interact weakly in the ground state. However, steady-state emission and excitation spectra at room temperature reveal that fluorescence from both the Bodipy and the porphyrin of 3 are strongly quenched suggesting that, in the excited state, energy and/or electron transfer might occur. Indeed, as transient absorption experiments show, selective excitation of Bodipy in 3 results in a rapid decay (τ ≈ 2 ps) of the Bodipy-based singlet excited state and a concomitant rise of a charge-separated state evolving from the porphyrin-based singlet excited state. In contrast, room-temperature emission studies on 6 show strong quenching of the Bodipy-based fluorescence leading to sensitized emission from the porphyrin moiety due to a transduction of the singlet excited state energy from Bodipy to the porphyrin. Emission experiments at 77 K in frozen toluene reveal that the room-temperature electron transfer pathway observed in 3 is suppressed. Instead, Bodipy excitation in 3 and 6 results in population of the first singlet excited state of the porphyrin chromophore. Subsequently, intersystem crossing leads to the porphyrin-based triplet excited state.