Brushing Up on Cartilage Lubrication: Polyelectrolyte-Enhanced Tribological Rehydration.

This study presents new insights into the potential role of polyelectrolyte interfaces in regulating low friction and interstitial fluid pressurization of cartilage. Polymer brushes composed of hydrophilic 3-sulfopropyl methacrylate potassium salt (SPMK) tethered to a PEEK substrate (SPMK-g-PEEK) are a compelling biomimetic solution for interfacing with cartilage, inspired by the natural lubricating biopolyelectrolyte constituents of synovial fluid. These SPMK-g-PEEK surfaces exhibit a hydrated compliant layer approximately 5 µm thick, demonstrating the ability to maintain low friction coefficients (µ ∼ 0.01) across a wide speed range (0.1-200 mm/s) under physiological loads (0.75-1.2 MPa). A novel polyelectrolyte-enhanced tribological rehydration mechanism is elucidated, capable of recovering up to ∼12% cartilage strain and subsequently facilitating cartilage interstitial fluid recovery, under loads ranging from 0.25 to 2.21 MPa. This is attributed to the combined effects of fluid confinement within the contact gap and the enhanced elastohydrodynamic behavior of polymer brushes. Contrary to conventional theories that emphasize interstitial fluid pressurization in regulating cartilage lubrication, this work demonstrates that SPMK-g-PEEK's frictional behavior with cartilage is independent of these factors and provides unabating aqueous lubrication. Polyelectrolyte-enhanced tribological rehydration can occur within a static contact area and operates independently of known mechanisms of cartilage interstitial fluid recovery established for converging or migrating cartilage contacts. These findings challenge existing paradigms, proposing a novel polyelectrolyte-cartilage tribological mechanism not exclusively reliant on interstitial fluid pressurization or cartilage contact geometry. The implications of this research extend to a broader understanding of synovial joint lubrication, offering insights into the development of joint replacement materials that more accurately replicate the natural functionality of cartilage.

Dual-Mobility Acetabular Components in Primary Total Hip Arthroplasty Do Not Increase the Risk of Complication Compared to Conventional Articulations: A Matched Cohort Comparative Analysis.

Background: A recent National Joint Registry report suggests a higher local complication risk for dual-mobility (DM) total hip arthroplasty (THA) compared to conventional articulation THA. This report may be subject to data heterogeneity with multiple confounders. Controlling for these factors by matching demographic characteristics may give different results. We aim to compare 2-year local complication rates between matched DM and conventional THAs in primary hip osteoarthritis. Methods: Data were collected for consecutive primary THAs undertaken via a posterior approach. The conventional articulation and DM cohorts were matched 3:1 for age, gender, American Society of Anesthesiology grade, body mass index, and operative time using a propensity score and nearest neighbor matching method. Outcome measures were 2-year local complication rates, reoperation rates, systemic complication rates, and mortality rates. Demographic and outcome data were compared, and cumulative survival rates (%) were assessed using Kaplan-Meier methodology with a 2-year local complication as the endpoint. Statistical significance was set at P < .05. Results: Four hundred twelve THAs were included: 309 conventional and 103 DM articulations. There were no statistically significant differences between DM and conventional articulation THAs for local complications (7 [6.8%] vs 23 [7.4%], P = .820), reoperations (3 [2.9%] vs 4 [1.3%], P = .374), systemic complications (3 [2.9%] vs 4 [1.3%], P = .374), or 90-day mortality (1 [1%] vs 2 [0.6%], P = 1.000). Kaplan-Meier survival analysis demonstrated similar 2-year survival rates for conventional THAs compared to DM THAs (93.3% [standard error, 0.014] vs 91.9% [standard error, 0.031], P = .906). Conclusions: This matched study shows that there is no difference in local complication rates between DM and conventional THA articulations.

Characterisation and Expression of Osteogenic and Periodontal Markers of Bone Marrow Mesenchymal Stem Cells (BM-MSCs) from Diabetic Knee Joints.

Type 2 diabetes mellitus (T2DM) represents a significant health problem globally and is linked to a number of complications such as cardiovascular disease, bone fragility and periodontitis. Autologous bone marrow mesenchymal stem cells (BM-MSCs) are a promising therapeutic approach for bone and periodontal regeneration; however, the effect of T2DM on the expression of osteogenic and periodontal markers in BM-MSCs is not fully established. Furthermore, the effect of the presence of comorbidities such as diabetes and osteoarthritis on BM-MSCs is also yet to be investigated. In the present study, BM-MSCs were isolated from osteoarthritic knee joints of diabetic and nondiabetic donors. Both cell groups were compared for their clonogenicity, proliferation rates, MSC enumeration and expression of surface markers. Formation of calcified deposits and expression of osteogenic and periodontal markers were assessed after 1, 2 and 3 weeks of basal and osteogenic culture. Diabetic and nondiabetic BM-MSCs showed similar clonogenic and growth potentials along with comparable numbers of MSCs. However, diabetic BM-MSCs displayed lower expression of periostin (POSTN) and cementum protein 1 (CEMP-1) at Wk3 osteogenic and Wk1 basal cultures, respectively. BM-MSCs from T2DM patients might be suitable candidates for stem cell-based therapeutics. However, further investigations into these cells' behaviours in vitro and in vivo under inflammatory environments and hyperglycaemic conditions are still required.

Initiating versus delaying treatment-dose anticoagulation in suspected venous thromboembolism (VTE) in post-operative hip and knee arthroplasty patients: Outcomes and risks.

Background: Hip and knee arthroplasty is a risk factor for venous thromboembolism (VTE). Initiation of treatment-dose anticoagulation in the post-operative period in suspected cases prior to confirmed diagnosis involves balancing increased bleeding risk to VTE-associated morbidity. Methods: A single-centre retrospective cohort study was undertaken comparing outcomes of empirical treatment of suspected VTE in post-operative elective lower-limb arthroplasty patients as opposed to delaying treatment until diagnosis is confirmed. All patients undergoing ultrasonography (US) or CT-pulmonary-angiogram (CTPA) for suspected VTE following elective total hip arthroplasty (THA) or total knee arthroplasty (TKA) between 05/05/17 and 19/07/21 were identified. Primary outcomes were surgical site infection (SSI), readmission, and other wound problems within 30-days of surgery. Results: 107 patients were included for analysis. 93 patients had suspected deep venous thrombosis (DVT), 21 had suspected pulmonary embolism (PE), and 7 were investigated for both DVT and PE. Empirical treatment-dose anticoagulation was initiated in 4 patients with suspected pulmonary embolism (PE) prior to CTPA, and 34 patients with suspected deep venous thrombosis (DVT) prior to US. No significant differences were noted in 30-day readmission rate ([DVT: 12 % vs 23 %, p = 0.41], [PE: 50 % vs 33 %, p = 1.00]), SSI rate ([DVT: 6 % vs 3 %, p = 1.00], [PE: 0 % vs 11 %, p = 1.00]) or other wound complication rate ([DVT: 3 % vs 3 %, p = 1.00), [PE 0 % vs 11 %, p = 1.00]) between empirically and non-empirically treated groups respectively. Conclusion: Empirical initiation of therapeutic anticoagulation in post-operative lower limb arthroplasty patients with suspected VTE appears to be safe practice prior to a definitive diagnosis.

In Vitro Osteogenesis Study of Shell Nacre Cement with Older and Young Donor Bone Marrow Mesenchymal Stem/Stromal Cells.

Bone void-filling cements are one of the preferred materials for managing irregular bone voids, particularly in the geriatric population who undergo many orthopedic surgeries. However, bone marrow mesenchymal stem/stromal cells (BM-MSCs) of older-age donors often exhibit reduced osteogenic capacity. Hence, it is crucial to evaluate candidate bone substitute materials with BM-MSCs from the geriatric population to determine the true osteogenic potential, thus simulating the clinical situation. With this concept, we investigated the osteogenic potential of shell nacre cement (SNC), a bone void-filling cement based on shell nacre powder and ladder-structured siloxane methacrylate, using older donor BM-MSCs (age > 55 years) and young donor BM-MSCs (age < 30 years). Direct and indirect cytotoxicity studies conducted with human BM-MSCs confirmed the non-cytotoxic nature of SNC. The standard colony-forming unit-fibroblast (CFU-F) assay and population doubling (PD) time assays revealed a significant reduction in the proliferation potential (p < 0.0001, p < 0.05) in older donor BM-MSCs compared to young donor BM-MSCs. Correspondingly, older donor BM-MSCs contained higher proportions of senescent, ß-galactosidase (SA-ß gal)-positive cells (nearly 2-fold, p < 0.001). In contrast, the proliferation capacity of older donor BM-MSCs, measured as the area density of CellTrackerTM green positive cells, was similar to that of young donor BM-MSCs following a 7-day culture on SNC. Furthermore, after 14 days of osteoinduction on SNC, scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS) showed that the amount of calcium and phosphorus deposited by young and older donor BM-MSCs on SNC was comparable. A similar trend was observed in the expression of the osteogenesis-related genes BMP2, RUNX2, ALP, COL1A1, OMD and SPARC. Overall, the results of this study indicated that SNC would be a promising candidate for managing bone voids in all age groups.

Risk factors for periprosthetic femoral fracture risk around a cemented polished taper-slip stem using an osteoporotic composite bone model.

This biomechanical study aimed to determine if variations in stem material, stem geometry, stem offset and cement viscosity affect mechanical resistance to postoperative periprosthetic fracture (PFF) after hip arthroplasty with a commonly used cemented polished taper-slip (PTS) stem (CPT, Zimmer Biomet) in a novel osteoporotic composite femoral bone model. Thirty-six osteoporotic composite femoral models were tested using a standardised in-vitro loading technique to simulate a typical PFF. Outcome measures were torque to failure (N), fracture energy (N/m2) and rotation to failure (°). Comparisons were made by stem material (cobalt chrome vs stainless steel), stem geometry (CPT stem vs Exeter stem), stem offset (standard offset vs extra extended offset) and cement viscosity (high viscosity vs low viscosity). Statistical comparisons were carried out with significance set at p < 0.05. All tested samples produced clinically representative fracture patterns with varying degrees of bone and cement comminution. There was no statistically significant difference in torque to failure, fracture energy or rotation to failure between any of the compared variables (all p > 0.05). This is the first biomechanical study on mechanical resistance to PFF using osteoporotic composite bone models. For the CPT stem, it confirms that stem material, stem offset, stem geometry and cement viscosity do not affect mechanical resistance to PFF in an osteoporotic bone model.

Soluble low affinity nerve growth factor receptor (sLNGFR) may regulate pain in knee osteoarthritis.

OBJECTIVES: Nerve growth factor ß (ß-NGF) is a protein which is important to the development of neurons particularly those involved in the transmission of pain and is central to the experience of pain in osteoarthritis (OA). Direct NGF antagonism has been shown to reduce OA pain but is associated with rapidly progressive OA. The aim of the study is to investigate the ability of soluble neurotrophin receptors in the NGF pathway to modulate pain in OA. METHODS: Synovial fluid (SF) was obtained from the knee joints of 43 subjects who underwent total knee arthroplasty. Visual analogue scale (VAS) pain scores were obtained prior to surgery. Customised-automated-ELISAs and commercial-ELISAs and LEGENDplex™ were used to measure soluble low-affinity nerve growth factor (LNGFR), soluble tropomyosin receptor kinase (TrkA), proNGF, ß-NGF, other neurotrophins (NT) and cytokines including inflammatory marker TNF-α. RESULTS: The VAS score positively correlated with ß-NGF (r=0.34) and there was positive association trend with neurotrophin-3 (NT-3), BDNF and negative association trend with ProNGF. sLNGFR positively correlated with VAS (r=0.33). The ß-NGF/soluble TrkA ratio showed a strong positive correlation with VAS (r=0.80). In contrast, there was no correlation between pain and the ß-NGF/sLNGFR ratio (r=-0.08). TNF-α positively correlated with ß-NGF (r=0.83), NT-3 (r=0.66), and brain-derived neurotrophic factor (BDNF) (r=0.50) and negatively with ProNGF (r= -0.74) and positively correlated with both soluble TrkA (r=0.62), sLNGFR (r=0.26). CONCLUSIONS: This study suggests that endogenous or cleaved sLNGFR, but not soluble TrkA may participate in OA pain modulation thus supporting further research into soluble LNGFR as a therapeutic target in OA.

Withholding of Hormone Replacement Therapy Prior to Total Joint Arthroplasty Surgery to Reduce the Risk of Postoperative Thromboembolic Events: Is It Justified?-A Systematic Review of Clinical Practice Guidelines.

BACKGROUND: Hormone replacement therapy (HRT), menopausal hormone therapy (MHT), and estrogen-containing medications are frequently withheld before elective lower limb arthroplasty, based on a perceived risk of venous thromboembolism (VTE). However, evidence linking HRT, MHT, and an increased VTE risk is equivocal. This systematic review evaluated the concordance of international clinical practice guidelines (CPGs) on the withholding of HRT or MHT. METHODS: The PubMed, Google Scholar, Cochrane, and Ovid databases were searched for CPGs for the preoperative, perioperative, and postoperative management of patients on HRT and MHT undergoing elective lower limb arthroplasty. This was supplemented by an internet search. There were 7 international CPGs in English, from Europe and North America, published between January 2000 and February 2023 reviewed against the Appraisal of Guidelines for Research & Evaluation Instrument (AGREE-II) criteria, in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) checklist. RESULTS: The guidelines reviewed revealed a mixed picture on HRT or MHT withdrawal and use in arthroplasty, with some featuring detailed advice on the preoperative and postoperative management of HRT or MHT (Scottish Intercollegiate Guidelines Network), while others featured no guidance (American College of Chest Physicians). The evidence referenced in these guidelines highlighted studies showing HRT or MHT to play a limited role in increasing VTE risk, with most studies from the 1990s and 2000s. CONCLUSIONS: Based on current evidence, non-estrogen-containing transdermal HRT or MHT should not be withheld in patients undergoing elective joint arthroplasty, though further evidence is required to justify withholding estrogen-containing forms.

Cemented femoral stem design and postoperative periprosthetic fracture risk following total hip arthroplasty.

Polished taper-slip (PTS) cemented stems have an excellent clinical track record and are the most common stem type used in primary total hip arthroplasty (THA) in the UK. Due to low rates of aseptic loosening, they have largely replaced more traditional composite beam (CB) cemented stems. However, there is now emerging evidence from multiple joint registries that PTS stems are associated with higher rates of postoperative periprosthetic femoral fracture (PFF) compared to their CB stem counterparts. The risk of both intraoperative and postoperative PFF remains greater with uncemented stems compared to either of these cemented stem subtypes. PFF continues to be a devastating complication following primary THA and is associated with high complication and mortality rates. Recent efforts have focused on identifying implant-related risk factors for PFF in order to guide preventative strategies, and therefore the purpose of this article is to present the current evidence on the effect of cemented femoral stem design on the risk of PFF.

Return to driving post upper or lower extremity orthopaedic surgical procedures: a scoping review of current published literature.

Patients undergoing planned or unplanned orthopaedic procedures involving their upper or lower extremity can prevent them from safe and timely return to driving, where they commonly ask, 'Doctor, when can I drive?' Driving recommendations after such procedures are varied. The current evidence available is based on a heterogenous data set with varying degrees of sample size and markedly differing study designs. This instructional review article provides a scoping overview of studies looking at return to driving after upper or lower extremity surgery in both trauma and elective settings and, where possible, to provide clinical recommendations for return to driving. Medline, EMBASE, SCOPUS, and Web of Science databases were searched according to a defined search protocol to elicit eligible studies. Articles were included if they reviewed adult drivers who underwent upper or lower extremity orthopaedic procedures, were written in English, and offered recommendations about driving. A total of 68 articles were included in the analysis, with 36 assessing the lower extremity and 37 reviewing the upper extremity. The evidence available from the studies reviewed was of poor methodological quality. There was a lack of adequately powered, high quality, randomised controlled trials (RCTs) with large sample sizes to assess safe return to driving for differing subset of injuries. Many articles provide generic guidelines on return to driving when patients feel safe to perform an emergency stop procedure with adequate steering wheel control. In future, RCTs should be performed to develop definitive return to driving protocols in patients undergoing upper and lower extremity procedures.

Preoperative Templating for Total Hip Arthroplasty: A Method for Calibrating Digital Radiographs Using Patient Demographics and Anthropometric Measurements.

Background Preoperative templating aids the surgeon in estimating implant size and placement. Calibration markers are used to set the correct magnification of digital images before templating. Improper marker placement or complete absence can lead to inaccuracy or an inability to calibrate images altogether. Aims This study describes a method for calibrating images using a patient's femoral head size (FHS) predicted using demographics and anthropometric data. Materials and methods A formula predicting the FHS was derived from a cohort of 507 patients who underwent hemiarthroplasty for an intracapsular fractured neck of the femur through multivariate regression analysis. A separate validation cohort (n=50) who had undergone total hip arthroplasty (THA) had postoperative radiographs calibrated using the predicted FHS and the native contralateral hip as a surrogate calibration marker. The THA femoral head implant size was subsequently measured and compared with the actual implant size selected intraoperatively. Measurements were performed by two independent assessors to determine intra- and interobserver reliability. Results Multivariate regression analyses showed four variables significantly correlated with the size of the femoral head: gender (p < 0.001), height (p < 0.001), weight (p < 0.001), and race (Asian) (p = 0.01). Using these, a regression model to predict the FHS was obtained with an R2 value of 0.65 and a standard error of 2.18 mm. The validation cohort showed that THA head implant size could be accurately measured with an average root-mean-squared error (RMSE) of 1.41 mm (SD = 0.97 mm; %RMSE = 4.7%). The implant head size was measured to be within 5%, 10%, and 15% RMSE in 57.5%, 93.0%, and 100.0% of cases, respectively. There was excellent intraobserver (R2 = 0.94 and 0.95) and interobserver (R2 = 0.94) reliability. Conclusions The novel method proposed and validated in this study, using a predicted FHS to calibrate digital images, provides an alternative means of templating THA for fractured neck of the femur patients, in whom external calibration markers are often absent.

National Registry Data Analysis on a Unique Highly-Crosslinked Polyethylene for Total Hip Arthroplasty.

Background: Several types of highly-crosslinked polyethylene with different manufacturing processes and mechanical properties are commercially available, including HIGHCROSS (Medacta). The aim of this registry study is to ascertain the long-term safety of the HIGHCROSS liners in total hip arthroplasty and compare the revision rates with its contemporaries using real-world data to establish their safety and generalizability when used by multiple surgeons. Methods: The Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) and the Swiss National Joint Registry (SIRIS) were selected for the large number of users of Medacta implants and the availability of long-term results. Three reports from SIRIS and 4 reports from AOANJRR were examined to establish the overall and Kaplan-Meier (KM) cumulative revision rate. Results: According to SIRIS, the HIGHCROSS liner was the most commonly used bearing surface with Medacta stems with overall revision rates for wear/osteolysis at 9.7 years of 0.04% and 0.03%, respectively, for AMIStem and Quadra. Based on AOANJRR, the KM cumulative revision rate for any reason of Medacta stems with HIGHCROSS liners was lower than that with ceramic liners at 3 years for MasterLoc and at 10 years for Quadra. The KM cumulative revision rate for any reasons of Medacta cementless cups with HIGHCROSS liners at 12 years was lower than the comparator made of all other implants and tribological couplings (1.6% vs 2.1%). Conclusions: This real-world data proves that long-term HIGHCROSS survival rates are comparable to other modern bearing surfaces.

The Feasibility of Hinged Knee Arthrodiastasis for Cartilage Regeneration: A Systematic Review of the Literature.

Introduction: Knee joint distraction (KJD) is a potential technique for cartilage regeneration in young patients with osteoarthritis of the knee. Static distraction has been utilised typically; however, a significant proportion of patients complain of knee stiffness post-distractor removal. The use of a hinged distractor may reduce the duration and severity of post-treatment knee stiffness by maintaining the range of motion during distraction. Furthermore, improved cartilage regeneration has been demonstrated in hinged ankle joint distraction as compared to static, and this may also be demonstrated at the knee. An evidence review was undertaken to inform further research and a potential change in practice. Aim: A systematic review of all primary research on hinged knee joint distraction for cartilage regeneration. Methods: An online systematic search of citation databases was conducted. Quality assessment and data extraction were undertaken by two separate researchers. Results: The literature search returned a small number of relevant studies, of which 7 were included. Three of these were animal studies, two cadaveric and two case series. The study quality was low or very low. There was significant methodological heterogeneity with difficulties encountered in the transfer of constructs from animal and cadaveric studies to humans. Issues faced included difficulties with hinge placement and pin site pain in motion. Conclusion: The feasibility of hinged knee joint distraction has yet to be proven. Any further research attempting to establish the benefits of hinged-over static knee distraction will have to take construct design considerations into account. How to cite this article: Lineham B, van Duren B, Harwood P, et al. The Feasibility of Hinged Knee Arthrodiastasis for Cartilage Regeneration: A Systematic Review of the Literature. Strategies Trauma Limb Reconstr 2023;18(1):37-43.

Simultaneous Hip Implant Segmentation and Gruen Landmarks Detection.

The assessment of implant status and complications of Total Hip Replacement (THR) relies mainly on the clinical evaluation of the X-ray images to analyse the implant and the surrounding rigid structures. Current clinical practise depends on the manual identification of important landmarks to define the implant boundary and to analyse many features in arthroplasty X-ray images, which is time-consuming and could be prone to human error. Semantic segmentation based on the Convolutional Neural Network (CNN) has demonstrated successful results in many medical segmentation tasks. However, these networks cannot define explicit properties that lead to inaccurate segmentation, especially with the limited size of image datasets. Our work integrates clinical knowledge with CNN to segment the implant and detect important features simultaneously. This is instrumental in the diagnosis of complications of arthroplasty, particularly for loose implant and implant-closed bone fractures, where the location of the fracture in relation to the implant must be accurately determined. In this work, we define the points of interest using Gruen zones that represent the interface of the implant with the surrounding bone to build a Statistical Shape Model (SSM). We propose a multitask CNN that combines regression of pose and shape parameters constructed from the SSM and semantic segmentation of the implant. This integrated approach has improved the estimation of implant shape, from 74% to 80% dice score, making segmentation realistic and allowing automatic detection of Gruen zones. To train and evaluate our method, we generated a dataset of annotated hip arthroplasty X-ray images that will be made available.

National variation in prophylactic antibiotic use for elective primary total joint replacement.

Aims: Prophylactic antibiotic regimens for elective primary total hip and knee arthroplasty vary widely across hospitals and trusts in the UK. This study aimed to identify antibiotic prophylaxis regimens currently in use for elective primary arthroplasty across the UK, establish variations in antibiotic prophylaxis regimens and their impact on the risk of periprosthetic joint infection (PJI) in the first-year post-index procedure, and evaluate adherence to current international consensus guidance. Methods: The guidelines for the primary and alternative recommended prophylactic antibiotic regimens in clean orthopaedic surgery (primary arthroplasty) for 109 hospitals and trusts across the UK were sought by searching each trust and hospital's website (intranet webpages), and by using the MicroGuide app. The mean cost of each antibiotic regimen was calculated using price data from the British National Formulary (BNF). Regimens were then compared to the 2018 Philadelphia Consensus Guidance, to evaluate adherence to international guidance. Results: The primary choice and dosing of the prophylactic antimicrobial regimens varied widely. The two most used regimens were combined teicoplanin and gentamicin, and cefuroxime followed by two or three doses of cefuroxime eight-hourly, recommended by 24 centres (22.02%) each. The alternative choice and dosing of the prophylactic antimicrobial regimen also varied widely across the 83 centres with data available. Prophylaxis regimens across some centres fail to cover the likeliest causes of surgical site infection (SSI). Five centres (4.59%) recommend co-amoxiclav, which confers no Staphylococcus coverage, while 33 centres (30.28%) recommend cefuroxime, which confers no Enterococcus coverage. Limited adherence to 2018 Philadelphia Consensus Guidance was observed, with 67 centres (61.50%) not including a cephalosporin in their guidance. Conclusion: This analysis of guidance on antimicrobial prophylaxis in primary arthroplasty across 109 hospitals and trusts in the UK has identified widespread variation in primary and alternative antimicrobial regimens currently recommended.

Highly lubricious SPMK-g-PEEK implant surfaces to facilitate rehydration of articular cartilage.

To enable long lasting osteochondral defect repairs which preserve the native function of synovial joint counter-face, it is essential to develop surfaces which are optimised to support healthy cartilage function by providing a hydrated, low friction and compliant sliding interface. PEEK surfaces were modified using a biocompatible 3-sulfopropyl methacrylate potassium salt (SPMK) through UV photo-polymerisation, resulting in a ∼350 nm thick hydrophilic coating rich in hydrophilic anionic sulfonic acid groups. Characterisation was done through Fourier Transformed Infrared Spectroscopy, Focused Ion Beam Scanning Electron Microscopy, and Water Contact Angle measurements. Using a Bruker UMT TriboLab, bovine cartilage sliding tests were conducted with real-time strain and shear force measurements, comparing untreated PEEK, SPMK functionalised PEEK (SPMK-g-PEEK), and Cobalt Chrome Molybdenum alloy. Tribological tests over 2.5 h at physiological loads (0.75 MPa) revealed that SPMK-g-PEEK maintains low friction (µ< 0.024) and minimises equilibrium strain, significantly reducing forces on the cartilage interface. Post-test analysis showed no notable damage to the cartilage interfacing against the SPMK functionalised surfaces. The application of a constitutive biphasic cartilage model to the experimental strain data reveals that SPMK surfaces increase the interfacial permeability of cartilage in sliding, facilitating fluid and strain recovery. Unlike previous demonstrations of sliding-induced tribological rehydration requiring specific hydrodynamic conditions, the SPMK-g-PEEK introduces a novel mode of tribological rehydration operating at low speeds and in a stationary contact area. SPMK-g-PEEK surfaces provide an enhanced cartilage counter-surface, which provides a highly hydrated and lubricious boundary layer along with supporting biphasic lubrication. Soft polymer surface functionalisation of orthopaedic implant surfaces are a promising approach for minimally invasive synovial joint repair with an enhanced bioinspired polyelectrolyte interface for sliding against cartilage. These hydrophilic surface coatings offer an enabling technology for the next generation of focal cartilage repair and hemiarthroplasty implant surfaces.

A systematic review demonstrating correlation of MRI compositional parameters with clinical outcomes following articular cartilage repair interventions in the knee.

Objective: Compositional-MRI parameters enable the assessment of cartilage ultrastructure. Correlation of these parameters with clinical outcomes is unclear. This systematic review investigated the correlation of various compositional- MRI parameters with clinical outcome measures following cartilage repair or regeneration interventions in the knee. Design: This study was registered with PROSPERO and reported in accordance with PRISMA. PubMed, Institute of Science Index, Scopus, Cochrane Central Register of Controlled Trials, and Embase databases were searched. All studies, regardless of type, that presented correlation of compositional- MRI parameters with clinical outcome measures were included. Two researchers independently performed data extraction and QUADAS-2 analysis. Compositional-MRI parameter change following intervention and correlation with clinical outcome measures were evaluated. Results: 19 studies were included. Risk of bias was generally low. 5 different compositional parameters were observed from the included studies. However, due to the significant variability in the reporting of compositional-MRI parameters across studies, meta-analyses were possible only for T2 values and T2 index values (T2 value of repair cartilage relative to normal cartilage). Correlation of T2 values of repair cartilage with clinical outcome score was r â€‹= â€‹0.33 [0.15, 0.52]. Correlation of T2 index with clinical outcome score was r â€‹= â€‹0.52 [0.32, 0.77]. Conclusions: Correlation between T2 values and clinical outcome scores following knee cartilage repair were found. The heterogeneity of the correlations extracted from the included studies limited the scope for the meta-analysis. Thus, standardised, high-quality studies are required for better assessment of correlation between compositional MRI parameters and clinical outcome measures after cartilage repair. Registration number: PROSPERO CRD42021287364.Study protocol available on PROSPERO website.

Outcomes of ankle joint distraction in a paediatric and young adult cohort presenting with symptomatic ankle arthritis.

Ankle arthritis in paediatric and young adult patients causes significant morbidity; therefore, joint-preserving procedures are preferable. Ankle joint distraction (AJD) is a technique that preserves the native joint. However, only short-term outcomes are reported in paediatric patients. Therefore, this study reports on intermediate-term outcomes in a paediatric cohort. Demographics for all patients who underwent AJD at two centres were prospectively collected. Case records were reviewed retrospectively for complications and further intervention. Mean joint space at baseline and follow-up radiographs were evaluated by two independent observers. All patients were contacted for completion of a Foot and Ankle Outcome Score (FAOS). Seven patients received AJD between February 2016 and June 2019. Median age at surgery was 15 years (9.0-24.6 years). Complications included one superficial pin-site infection and one patient death due to complications from juvenile idiopathic arthritis 6.2 years post-operatively. Two patients were converted to fusion, at 12.6 months and 26.2 months following frame removal; one patient underwent spontaneous fusion at 9 months following frame removal. The four patients who continued without further intervention achieved 2.59 mm mean joint space at last follow-up (0.65-5.08 mm) and FAOS of 35-79%. Mean follow-up length was 4.3 years (2.9-6.3 years) with final radiographs at mean 2.6 years. While recognising the limitations of this retrospective review, several patients had significant, sustained improvements in joint space with good clinical outcome. Complications for this procedure are minimal, and it is a potential joint-preserving option for managing end-stage ankle arthritis in young patients.

High rate of radiolucent lines following the cemented original design of the ATTUNE total knee arthroplasty.

Aims: Loosening of components after total knee arthroplasty (TKA) can be associated with the development of radiolucent lines (RLLs). The aim of this study was to assess the rate of formation of RLLs in the cemented original design of the ATTUNE TKA and their relationship to loosening. Methods: A systematic search was undertaken using the Cochrane methodology in three online databases: MEDLINE, Embase, and CINAHL. Studies were screened against predetermined criteria, and data were extracted. Available National Joint Registries in the Network of Orthopaedic Registries of Europe were also screened. A random effects model meta-analysis was undertaken. Results: Of 263 studies, 12 were included with a total of 3,861 TKAs. Meta-analysis of ten studies showed high rates of overall tibial or femoral RLLs for the cemented original design of the ATTUNE TKA. The overall rate was 21.4% (95% confidence interval (CI) 12.7% to 33.7%) for all types of design but was higher for certain subgroups: 27.4% (95% CI 13.4% to 47.9%) for the cruciate-retaining type, and 29.9% (95% CI 15.6% to 49.6%) for the fixed-bearing type. Meta-analysis of five studies comparing the ATTUNE TKA with other implants showed a significantly higher risk of overall tibial or femoral RLLs (odds ratio (OR) 2.841 (95% CI 1.219 to 6.623); p = 0.016) for the ATTUNE. The rates of loosening or revision for loosening were lower, at 1.2% and 0.9% respectively, but the rates varied from 0% to 16.3%. The registry data did not report specifically on the original ATTUNE TKA or on revision due to loosening, but 'all-cause' five-year revision rates for the cemented ATTUNE varied from 2.6% to 5.9%. Conclusion: The original cemented ATTUNE TKA has high rates of RLLs, but their clinical significance is uncertain given the overall low associated rates of loosening and revision. However, in view of the high rates of RLLs and the variation in the rates of loosening and revision between studies and registries, close surveillance of patients who have undergone TKA with the original ATTUNE system is recommended.

"Wearable Sensors to Guide Remote Rehabilitation Following Knee Arthroplasty Surgery".

Background: Total knee arthroplasty requires effective rehabilitation to achieve optimal results, but institutions often rely on unsupervised home exercises due to cost constraints. Wearable sensors have become increasingly popular as a potential method of monitoring patients remotely to ensure efficacy and compliance. This review assesses the current evidence for their use in remotely monitored rehabilitation following knee arthroplasty. Methods: A systematic review of the literature from 1st January 2000 to 17th February 2022 was undertaken. Devices were categorised as joint-specific or physical activity sensors. Studies were classified as those providing remotely supervised rehabilitation as an additional or as an alternative intervention. Results: Remotely supervised rehabilitation using wearable sensors demonstrated similar outcomes when provided as an alternative to standard care in most studies. One group found improved outcomes for knee-specific sensors compared with standard care. There were improved physical activity and healthcare resource use outcomes described in the literature where sensors were used in addition to standard care. Discussion: This review found evidence for the use of wearable sensors in remotely supervised rehabilitation following knee arthroplasty surgery. This included methodological heterogeneity, differing definitions of standard care, and variable follow-up periods. Robust randomised control trial data with a longer follow-up period are needed.