Wafer-level assembly of carbon nanotube networks using dielectrophoresis.

We use dielectrophoresis (DEP) to controllably and simultaneously assemble multiple carbon nanotube (CNT) networks at the wafer level. By an appropriate choice of electrode dimensions and geometry, an electric field is generated that captures CNTs from a sizable volume of suspension, resulting in good CNT network uniformity and alignment. During the DEP process, the electrical characteristics of the CNT network are measured and correlated with the network morphology. These experiments give novel insight into the physics of DEP assembly of CNT networks, and demonstrate the scalability of DEP for future device applications.

Resonant oscillators with carbon-nanotube torsion springs.

We report on the characterization of nanometer-scale resonators. Each device incorporates one multiwalled carbon nanotube (MWNT) as a torsional spring. The devices are actuated electrostatically, and their deflections, both low frequency and on resonance, are detected optically. These are some of the smallest electromechanical devices ever created and are a demonstration of practical integrated MWNT-based oscillators. The results also show surprising intershell mechanical coupling behavior in the MWNTs.

Laterally modulated 2D electron system in the extreme quantum limit.

We report on magnetotransport of a two-dimensional electron system (2DES), located 32 nm below the surface, with a surface superlattice gate structure of periodicity 39 nm imposing a periodic modulation of its potential. For low Landau level fillings nu, the diagonal resistivity displays a rich pattern of fluctuations, even though the disorder dominates over the periodic modulation. Theoretical arguments based on the combined effects of the long-wavelength, strong disorder and the short-wavelength, weak periodic modulation present in the 2DES qualitatively explain the data.

Torsional response and stiffening of individual multiwalled carbon nanotubes.

We report on the characterization of torsional oscillators which use multiwalled carbon nanotubes as the spring elements. Through atomic-force-microscope force-distance measurements we are able to apply torsional strains to the nanotubes and measure their torsional spring constants, and estimate their effective shear moduli. The data show that the nanotubes are stiffened by repeated flexing. We speculate that changes in the intershell mechanical coupling are responsible for the stiffening.

In-plane magnetic field-induced spin polarization and transition to insulating behavior in two-dimensional hole systems.

Using a novel technique, we make quantitative measurements of the spin polarization of dilute [ (3.4-6.8)x10(10) cm(-2)] GaAs (311)A two-dimensional holes as a function of an in-plane magnetic field. As the field is increased the system gradually becomes spin polarized, with the degree of spin polarization depending on the orientation of the field relative to the crystal axes. Moreover, the behavior of the system turns from metallic to insulating before it is fully spin polarized. The minority-spin population at the transition is approximately 8x10(9) cm(-2), close to the density below which the system makes a transition to an insulating state in the absence of a magnetic field.

Resistance spikes at transitions between quantum hall ferromagnets.

We report a manifestation of first-order magnetic transitions in two-dimensional electron systems. This phenomenon occurs in aluminum arsenide quantum wells with sufficiently low carrier densities and appears as a set of hysteretic spikes in the resistance of a sample placed in crossed parallel and perpendicular magnetic fields, each spike occurring at the transition between states with different partial magnetizations. Our experiments thus indicate that the presence of magnetic domains at the transition starkly increases dissipation, an effect also suspected in other ferromagnetic materials. Analysis of the positions of the transition spikes allows us to deduce the change in exchange-correlation energy across the magnetic transition, which in turn will help improve our understanding of metallic ferromagnetism.