Surface potential-adjusted surface states in 3D topological photonic crystals.

Surface potential in a topological matter could unprecedentedly localize the waves. However, this surface potential is yet to be exploited in topological photonic systems. Here, we demonstrate that photonic surface states can be induced and controlled by the surface potential in a dielectric double gyroid (DG) photonic crystal. The basis translation in a unit cell enables tuning of the surface potential, which in turn regulates the degree of wave localization. The gradual modulation of DG photonic crystals enables the generation of a pseudomagnetic field. Overall, this study shows the interplay between surface potential and pseudomagnetic field regarding the surface states. The physical consequences outlined herein not only widen the scope of surface states in 3D photonic crystals but also highlight the importance of surface treatments in a photonic system.

DNA Origami Guided Self-Assembly of Plasmonic Polymers with Robust Long-Range Plasmonic Resonance.

Plasmonic polymers consisting of metallic nanoparticles (NPs) are able to squeeze light into the deep-subwavelength space and transfer along a highly confined nanoscale path in long range. DNA nanotechnology, particularly benefiting from the molecular programmability of DNA origami, has provided otherwise nearly impossible platforms for constructing plasmonic nanoparticle polymers with designer configurations and nanoscale gaps. Here, we design and assemble a DNA origami hashtag tile that is able to polymerize into one-dimensional chains with high rigidity. The DNA origami hashtag chains are used as frames to enable robust, versatile, and precise arrangement of metallic NPs into micrometer-long chiral and magnetic plasmonic polymers, which are capable of efficiently transporting plasmonic angular momentum and magnetic surface plasmonic polaritons at the deep-subwavelength scale. Our work provides a molecular platform for the fabrication of long, straight, and structurally complex nanoparticle polymers with emerging plasmonic properties that are appealing to a variety of fields.

3D Printed, Customizable, and Multifunctional Smart Electronic Eyeglasses for Wearable Healthcare Systems and Human-Machine Interfaces.

Personal accessories such as glasses and watches that we usually carry in our daily life can yield useful information from the human body, yet most of them are limited to exercise-related parameters or simple heart rates. Since these restricted characteristics might arise from interfaces between the body and items as one of the main reasons, an interface design considering such a factor can provide us with biologically meaningful data. Here, we describe three-dimensional-printed, personalized, multifunctional electronic eyeglasses (E-glasses), not only to monitor various biological phenomena but also to propose a strategy to coordinate the recorded data for active commands and game operations for human-machine interaction (HMI) applications. Soft, highly conductive composite electrodes embedded in the E-glasses enable us to achieve reliable, continuous recordings of physiological activities. UV-responsive, color-tunable lenses using an electrochromic ionic gel offer the functionality of both eyeglass and sunglass modes, and accelerometers provide the capability of tracking precise human postures and behaviors. Detailed studies of electrophysiological signals including electroencephalogram and electrooculogram demonstrate the feasibility of smart electronic glasses for practical use as a platform for future HMI systems.

Design of DNA Origami Diamond Photonic Crystals.

Self-assembled photonic crystals have proven to be a fascinating class of photonic materials for nonabsorbing structural colorizations over large areas and in diverse relevant applications, including tools for on-chip spectrometers and biosensors, platforms for reflective displays, and templates for energy devices. The most prevalent building blocks for the self-assembly of photonic crystals are spherical colloids and block copolymers (BCPs) because of the generic appeal of these materials, which can be crafted into large-area 3D lattices. However, because of the intrinsic limitations of these structures, these two building blocks are difficult to assemble into a direct rod-connected diamond lattice, which is considered to be a champion photonic crystal. Here, we present a DNA origami-route for a direct rod-connected diamond photonic crystal exhibiting a complete photonic bandgap (PBG) in the visible regime. Using a combination of electromagnetic, phononic, and mechanical numerical analyses, we identify (i) the structural constraints of the 50 megadalton-scale giant DNA origami building blocks that could self-assemble into a direct rod-connected diamond lattice with high accuracy, and (ii) the elastic moduli that are essentials for maintaining lattice integrity in a buffer solution. A solution molding process could enable the transformation of the as-assembled DNA origami lattice into a porous silicon- or germanium-coated composite crystal with enhanced refractive index contrast, in that a champion relative bandwidth for the photonic bandgap (i.e., 0.29) could become possible even for a relatively low volume fraction (i.e., 16 vol %).

Characterization of aerosolized particles from nanoclay-enabled composites during manipulation processes.

Manufacturing, processing, use, and disposal of nanoclay-enabled composites potentially lead to the release of nanoclay particles from the polymer matrix in which they are embedded; however, exposures to airborne particles are poorly understood. The present study was conducted to characterize airborne particles released during sanding of nanoclay-enabled thermoplastic composites. Two types of nanoclay, Cloisite® 25A and Cloisite® 93A, were dispersed in polypropylene at 0%, 1%, and 4% loading by weight. Zirconium aluminum oxide (P100/P180 grits) and silicon carbide (P120/P320 grits) sandpapers were used to abrade composites in controlled experiments followed by real-time and offline particle analyses. Overall, sanding the virgin polypropylene with zirconium aluminum oxide sandpaper released more particles compared to silicon carbide sandpaper, with the later exhibiting similar or lower concentrations than that of polypropylene. Thus, a further investigation was performed for the samples collected using the zirconium aluminum oxide sandpaper. The 1% 25A, 1% 93A, and 4% 93A composites generated substantially higher particle number concentrations (1.3-2.6 times) and respirable mass concentrations (1.2-2.3 times) relative to the virgin polypropylene, while the 4% 25A composite produced comparable results, regardless of sandpaper type. It was observed that the majority of the inhalable particles were originated from composite materials with a significant number of protrusions of nanoclay (18-59%). These findings indicate that the percent loading and dispersion of nanoclay in the polypropylene modified the mechanical properties and thus, along with sandpaper type, affected the number of particles released during sanding, implicating the cause of potential adverse health effects.

Copper-Halide Polymer Nanowires as Versatile Supports for Single-Atom Catalysts.

Single-atom catalysts are heterogeneous catalysts with atomistically dispersed atoms acting as a catalytically active center, and have recently attracted much attention owing to the minimal use of noble metals. However, a scalable and inexpensive support that can stably anchor isolated atoms remains a challenge due to high surface energy. Here, copper-halide polymer nanowires with sub-nanometer pores are proposed as a versatile support for single-atom catalysts. The synthesis of the nanowires is straightforward and completed in a few minutes. Well-defined sub-nanometer pores and a large free volume of the nanowires are advantageous over any other support material. The nanowires can anchor various atomistically dispersed metal atoms into the sub-nanometer pores up to ≈3 at% via a simple solution process, and this value is at least twice as big as previously reported data. The hydrogen evolution reaction activity of -18.0 A mgPt -1 at -0.2 V overpotential shows its potential for single-atom catalysts support.

Highly tumor-specific DNA nanostructures discovered by in vivo screening of a nucleic acid cage library and their applications in tumor-targeted drug delivery.

Enormous efforts have been made to harness nanoparticles showing extravasation around tumors for tumor-targeted drug carriers. Owing to the complexity of in vivo environments, however, it is very difficult to rationally design a nanoconstruct showing high tumor specificity. Here, we show an approach to develop tumor-specific drug carriers by screening a library of self-assembled nucleic acid cages in vivo. After preparation of a library of 16 nucleic acid cages by combining the sugar backbone and the shape of cages, we screened the biodistribution of the cages intravenously injected into tumor-bearing mice, to discover the cages with high tumor-specificity. This tumor specificity was found to be closely related with serum stability, cancer cell uptake efficiency, and macrophage evasion rate. We further utilized the cages showing high tumor specificity as carriers for the delivery of not only a cytotoxic small molecule drug but also a macromolecular apoptotic protein exclusively into the tumor tissue to induce tumor-specific damage. The results demonstrate that our library-based strategy to discover tumor-targeted carriers can be an efficient way to develop anti-cancer nanomedicines with tumor specificity and enhanced potency.

Costs Attributable to Overweight and Obesity in Working Asthma Patients in the United States.

PURPOSE: To estimate annual health care and productivity loss costs attributable to overweight or obesity in working asthmatic patients. MATERIALS AND METHODS: This study was conducted using the 2003-2013 Medical Expenditure Panel Survey (MEPS) in the United States. Patients aged 18 to 64 years with asthma were identified via self-reported diagnosis, a Clinical Classification Code of 128, or a ICD-9-CM code of 493.xx. All-cause health care costs were estimated using a generalized linear model with a log function and a gamma distribution. Productivity loss costs were estimated in relation to hourly wages and missed work days, and a two-part model was used to adjust for patients with zero costs. To estimate the costs attributable to overweight or obesity in asthma patients, costs were estimated by the recycled prediction method. RESULTS: Among 11670 working patients with a diagnosis of asthma, 4428 (35.2%) were obese and 3761 (33.0%) were overweight. The health care costs attributable to obesity and overweight in working asthma patients were estimated to be $878 [95% confidence interval (CI): $861-$895] and $257 (95% CI: $251-$262) per person per year, respectively, from 2003 to 2013. The productivity loss costs attributable to obesity and overweight among working asthma patients were $256 (95% CI: $253-$260) and $26 (95% CI: $26-$27) per person per year, respectively. CONCLUSION: Health care and productivity loss costs attributable to overweight and obesity in asthma patients are substantial. This study's results highlight the importance of effective public health and educational initiatives targeted at reducing overweight and obesity among patients with asthma, which may help lower the economic burden of asthma.

New electrospinning nozzle to reduce jet instability and its application to manufacture of multi-layered nanofibers.

A new nozzle system for the efficient production of multi-layered nanofibers through electrospinning is reported. Developed a decade ago, the commonly used coaxial nozzle system consisting of two concentric cylindrical needles has remained unchanged, despite recent advances in multi-layered, multi-functional nanofibers. Here, we demonstrate a core-cut nozzle system, in which the exit pipe of the core nozzle is removed such that the core fluid can form an envelope inside the shell solution. This configuration effectively improves the coaxial electrospinning behavior of two fluids and significantly reduces the jet instability, which was proved by finite element simulation. The proposed electrospinning nozzle system was then used to fabricate bi- and tri-layered carbon nanofibers.

Exposure to Volatile Organic Compounds and Possibility of Exposure to By-product Volatile Organic Compounds in Photolithography Processes in Semiconductor Manufacturing Factories.

OBJECTIVES: The purpose of this study was to measure the concentration of volatile organic compound (VOC)s originated from the chemicals used and/or derived from the original parental chemicals in the photolithography processes of semiconductor manufacturing factories. METHODS: A total of four photolithography processes in 4 Fabs at three different semiconductor manufacturing factories in Korea were selected for this study. This study investigated the types of chemicals used and generated during the photolithography process of each Fab, and the concentration levels of VOCs for each Fab. RESULTS: A variety of organic compounds such as ketone, alcohol, and acetate compounds as well as aromatic compounds were used as solvents and developing agents in the processes. Also, the generation of by-products, such as toluene and phenol, was identified through a thermal decomposition experiment performed on a photoresist. The VOC concentration levels in the processes were lower than 5% of the threshold limit value (TLV)s. However, the air contaminated with chemical substances generated during the processes was re-circulated through the ventilation system, thereby affecting the airborne VOC concentrations in the photolithography processes. CONCLUSION: Tens of organic compounds were being used in the photolithography processes, though the types of chemical used varied with the factory. Also, by-products, such as aromatic compounds, could be generated during photoresist patterning by exposure to light. Although the airborne VOC concentrations resulting from the processes were lower than 5% of the TLVs, employees still could be exposed directly or indirectly to various types of VOCs.

Microbial exposure assessment in sawmill, livestock feed industry, and metal working fluids handling industry.

OBJECTIVES: The objective of this study is to investigate the distribution patterns and exposure concentrations of bioaerosols in industries suspected to have high levels of bioaerosol exposure. METHODS: We selected 11 plants including 3 livestock feed plants (LF industry), 3 metal working fluids handling plants (MWFs industry), and 5 sawmills and measured total airborne bacteria, fungi, endotoxins, as well as dust. Airborne bacteria and fungi were measured with one stage impactor, six stage cascade impactor, and gelatin filters. Endotoxins were measured with polycarbonate filters. RESULTS: The geometric means (GM) of the airborne concentrations of bacteria, fungi, and endotoxins were 1,864, 2,252 CFU/m(3), and 31.5 EU/m(3), respectively at the sawmills, followed by the LF industry (535, 585 CFU/m(3), and 22.0 EU/m(3)) and MWFs industry (258, 331 CFU/m(3), and 8.7 EU/m(3)). These concentrations by industry type were significantly statistically different (p < 0.01). The ratio of indoor to outdoor concentration was 6.2, 1.9, 3.2, and 3.2 for bacteria, fungi, endotoxins, and dust in the LF industry, 5.0, 0.9, 2.3, and 12.5 in the MWFs industry, and 3.7, 4.1, 3.3, and 9.7 in sawmills. The respiratory fractions of bioaerosols were differentiated by bioaerosol types and industry types: the respiratory fraction of bacteria in the LF industry, MWF industry, and sawmills was 59.4%, 72.0%, and 57.7%, respectively, and that of fungi was 77.3%, 89.5%, and 83.7% in the same order. CONCLUSION: We found that bioaerosol concentration was the highest in sawmills, followed by LF industry facilities and MWFs industry facilities. The indoor/outdoor ratio of microorganisms was larger than 1 and respiratory fraction of microorganisms was more than 50% of the total microorganism concentrations which might penetrate respiratory tract easily. All these findings suggest that bioaerosol in the surveyed industries should be controlled to prevent worker respiratory diseases.