Silicone engineered anisotropic lithography for ultrahigh-density OLEDs.

Ultrahigh-resolution patterning with high-throughput and high-fidelity is highly in demand for expanding the potential of organic light-emitting diodes (OLEDs) from mobile and TV displays into near-to-eye microdisplays. However, current patterning techniques so far suffer from low resolution, consecutive pattern for RGB pixelation, low pattern fidelity, and throughput issue. Here, we present a silicone engineered anisotropic lithography of the organic light-emitting semiconductor (OLES) that in-situ forms a non-volatile etch-blocking layer during reactive ion etching. This unique feature not only slows the etch rate but also enhances the anisotropy of etch direction, leading to gain delicate control in forming ultrahigh-density multicolor OLES patterns (up to 4500 pixels per inch) through photolithography. This patterning strategy inspired by silicon etching chemistry is expected to provide new insights into ultrahigh-density OLED microdisplays.

Rib and pericardium invaded huge abdominal mass in young woman: A case report with literature review.

RATIONALE: Desmoid fibromatosis is a rare benign tumor, but due to its rarity and diverse clinical course, treatment guidelines have not been established. However, since a good prognosis can be expected, an accurate diagnosis and appropriate treatment are required. We describe a rare case of desmoid fibromatosis on young female that presented as huge abdominal mass. PATIENTS CONCERNS: A 28-year-old female with left upper abdominal pain 1 month ago was referred. DIAGNOSES: Abdominal computed tomography and magnetic resonance imaging revealed a heterogeneous soft tissue mass approximately 29 × 17 cm in size in the left abdomen with abdominal wall invasion and pathological fracture in costochondral junction of the left 8th to 10th ribs. INTERVENTIONS: Surgical resection was performed. OUTCOMES: 33 × 23 × 6 cm sized tumorous mass showed proliferation of bland fibromatosis and myofibroblast with nuclear ß-catenin expression on pathological examination. Desmoid fibromatosis arising from intra-abdominal soft tissue with ribs and pericardium invasion was diagnosed. LESSONS: The mainstay of treatment of symptomatic desmoid fibromatosis is surgical resection, and in the case of abdominal tumor, it can be more dangerous when it invades adjacent organ. We report a case that required additionally multidisciplinary approach for surgery and postoperative treatment of huge abdominal desmoid tumor which infiltrate bone and pericardium beyond abdominal cavity.

Interpenetrating Polymer Semiconductor Nanonetwork Channel for Ultrasensitive, Selective, and Fast Recovered Chemodetection.

Organic semiconductor (OSC)-based gas detection has attracted considerable attention due to the facile manufacturing process and effective contact with target chemicals at room temperature. However, OSCs intrinsically suffer from inferior sensing and recovery capability due to lack of functional sites and deep gas penetration into the film. Here, we describe an interpenetrating polymer semiconductor nanonetwork (IPSN) channel possessing unreacted silanol (Si-OH) groups on its surface to overcome bottlenecks that come from OSC-based chemodetection. On the top of the IPSN, moreover, we introduced electron-donating amine (NH2) groups as a chemical receptor because they strongly interact with the electron-withdrawing nature of NO2 gas. The NH2-IPSN-based field-effect transistor exhibited high-performance chemodetection such as ultrasensitivity (990% ppm-1 at 5 ppm) and excellent NO2 selectivity against other toxic gases. Impressively, the gas recovery was significantly improved because the NH2 chemical receptors anchored on the surface of the IPSN suppress deep gas penetration into the film. This work demonstrates that our NO2 chemodetection is expected to provide inspiration and guideline for realization of practical gas sensors in various industries and daily life.

Deformable Ionic Polymer Artificial Mechanotransducer with an Interpenetrating Nanofibrillar Network.

We demonstrate an ionic polymer artificial mechanotransducer (i-PAM) capable of simultaneously yielding an efficient wide bandwidth and a blocking force to maximize human tactile recognition in soft tactile feedback. The unique methodology in the i-PAM relies on an ionic interpenetrating nanofibrillar network that is formed at the interface of (i) an ionic thermoplastic polyurethane nanofibrillar matrix with an ionic liquid of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM]+[TFSI]-) and (ii) ionic poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid) (PEDOT:PSS) conducting polymer electrodes with dimethyl sulfoxide and [EMIM]+[TFSI]- as additives. The i-PAM-based actuator with the ionic PEDOT:PSS exhibits a stable operation up to 200 Hz at low voltage as well as a blocking force of 0.4 mN, which can be potentially adapted to soft tactile feedback. Furthermore, on the basis of this fast i-PAM, we realized alphabet tactile rendering by using a 3 × 3 i-PAM array stimulated by a dc input of 2 V. We believe that our proposed approach can provide a rational guide to the human-machine soft haptic interface.

Universal Route to Impart Orthogonality to Polymer Semiconductors for Sub-Micrometer Tandem Electronics.

A universal method that enables utilization of conventional photolithography for processing a variety of polymer semiconductors is developed. The method relies on imparting chemical and physical orthogonality to a polymer film via formation of a semi-interpenetrating diphasic polymer network with a bridged polysilsesquioxane structure, which is termed an orthogonal polymer semiconductor gel. The synthesized gel films remain tolerant to various chemical and physical etching processes involved in photolithography, thereby facilitating fabrication of high-resolution patterns of polymer semiconductors. This method is utilized for fabricating tandem electronics, including pn-complementary inverter logic devices and pixelated polymer light-emitting diodes, which require deposition of multiple polymer semiconductors through solution processes. This novel and universal method is expected to significantly influence the development of advanced polymer electronics requiring sub-micrometer tandem structures.

Solvent-Free Processable and Photo-Patternable Hybrid Gate Dielectric for Flexible Top-Gate Organic Field-Effect Transistors.

We report a novel solvent-free and direct photopatternable poly[(mercaptopropyl)methyl-siloxane] (PMMS) hybrid dielectric for flexible top-gate organic field-effect transistors (OFETs) utilizing a photoactivated thiol-ene reaction under UV irradiation of 254 nm to induce cross-linking, even in air and at low temperatures. In particular, a solvent-free PMMS-f dielectric film, for which an optimal cross-linking density is shown by a well-organized molar ratio between thiol and vinyl in the thiol-ene reaction, exhibited a high dielectric constant (5.4 @ 100 Hz) and a low leakage current (<1 nA mm-2 @ 2 MV cm-1). The excellent dielectric characteristics of the solvent-free PMMS-hybrid dielectrics, along with their other unique characteristics of a direct photopatternability for which UV-nanoimprint lithography is used and a high surface energy of 45.6 mJ m-2, allowed the successful application of the dielectrics to flexible solvent-free top-gate OFETs with a high reliability against the radius of curvature (9.5, 7.0, and 5.5 mm) and repetitive bending cycles at the radius of curvature of 5.5 mm. This will eventually enable the proposed dielectric design to be used in a variety of applications such as flexible displays and soft organic sensors including chemical and tactile capability.

Intense pulsed light induced crystallization of a liquid-crystalline polymer semiconductor for efficient production of flexible thin-film transistors.

Here we demonstrated the split-second crystallization of a liquid-crystalline conjugated polymer semiconductor induced by irradiation with intense pulsed white light (IPWL) for the efficient improvement of electrical properties of flexible thin film transistors. A few seconds of IPWL irradiation of poly(didodecylquaterthiophene-alt-didodecylbithiazole) (PQTBTz-C12) thin films generated heat energy through the photo-thermal effect, leading to the crystallization of PQTBTz-C12 and formation of nodule-like nanostructures. The IPWL-induced crystallization of PQTBTz-C12 resulted in a threefold improvement in the field-effect mobility of thin film transistors compared to as-prepared devices. The conformational change of the PQTBTz-C12 chains was found to be strongly related to the irradiation fluence. As a proof-of-concept, the IPWL treatment was successfully applied to the PQTBTz-C12 layer in flexible transistors based on plastic substrates. The performance of these flexible devices was significantly improved after only 0.6 s of IPWL treatment, without deformation of the plastic substrate.