Membrane reciprocation and quorum quenching: An innovative combination for fouling control and energy saving in membrane bioreactors.

Membrane bioreactors (MBRs) play a crucial role in wastewater treatment, but they face considerable challenges due to fouling. To tackle this issue, innovative strategies are needed. This study investigated the effectiveness of membrane reciprocation and quorum quenching (QQ) to control fouling in MBRs. The study compared MBRs using membrane reciprocation (30 rpm) and QQ (injecting media containing 100 or 200 mg/L BH4) with conventional MBRs employing different air-scouring intensities. The results demonstrated that combining membrane reciprocation (30 rpm) with QQ (200 mg/L BH4) significantly extended the service time of MBRs, making it approximately six times longer than conventional methods. Moreover, this approach reduced physically reversible resistance. The reduction in signal molecules related to biofouling due to QQ showcased its critical role in controlling biofouling, even under high shear caused by membrane reciprocation. However, the impact of QQ on microbial community structure appeared relatively insignificant when compared to factors such as operation time, aeration intensity, and membrane reciprocation. By combining membrane reciprocation and QQ, the study achieved a remarkable 81 % energy saving compared to extensive aeration (103 s-1 in velocity gradient), in addition to the extended service time. Importantly, this combined antifouling approach did not negatively affect microbial characteristics and wastewater treatment, emphasizing its effectiveness in MBRs. Overall, the findings of this study offer valuable insights for developing synergistic fouling control strategies in MBRs, significantly improving the energy efficiency of the wastewater treatment process.

The relationship between quorum sensing dynamics and biological performances during anaerobic membrane bioreactor treatment.

Anaerobic membrane bioreactors (AnMBRs) enhance carbon neutrality with biomethane recovery from wastewater; however, microbial signaling, which may affect biological performances, was poorly understood. Here, we thus evaluate quorum sensing (QS) dynamics while monitoring acyl-homoserine lactones (AHLs) and autoinducer-2 (AI-2) levels during long-term AnMBR operations after sludge inoculation. Significant organic removal and methane production were achieved with the reactor startup. Signal molecule levels varied with transient organic loading rates, depending on their types. A starving condition may cause an increase in short- and medium-chain AHLs and AI-2. Biopolymers, biosolids, volatile fatty acids, and alkalinity levels had positive correlations with short- and medium-chain AHLs and AI-2, whereas methane production had positive correlations with long-chain AHLs. The principal component analysis of QS signal composition and biological performance data explains their interconnectivity. The findings of this study help to understand that QS signals regulate metabolic pathways in addition to microbial group behaviors.

Membrane electro-oxidizer: A new hybrid membrane system with electrochemical oxidation for enhanced organics and fouling control.

The synergistic combination of membrane filtration with advanced oxidation is of particular interest for next-generation wastewater treatment technologies. A membrane electro-oxidizer (MEO) hybridizing a submerged microfilter and an electrochemical cell was developed and investigated for tertiary treatment of secondary industrial (textile) wastewater effluent. Laboratory- and pilot-scale MEO systems were designed and evaluated for treatment efficiency and membrane fouling control. The MEO achieved substantial removal of color (50-90%), turbidity (>90%), and bacteria (>4 log) as well as chemical oxygen demand (13-31%) and 1,4-dioxane (∼25-53%). Fluorescence-based parallel factor analysis disclosed the degradation of humic-like organics with fluorophores. Size exclusion chromatograms with organic carbon detection confirmed the removal of specific organic molecules with ∼100 Da. While investigating the effects of oxidant quenching agents, reactive chlorine species and hydrogen peroxide were found to be most responsible for the anodic oxidation of secondary effluent organics. The efficacy of membrane fouling mitigation by the MEO was greater when higher electric current densities were applied, but was not dependent on the number of electrochemical cells installed. The MEO is a promising technology for enhanced organics removal with simultaneous fouling control due to its multifunctional active oxidants.

Ni removal from aqueous solutions by chemical reduction: Impact of pH and pe in the presence of citrate.

The chemical precipitation of Ni ions from industrial wastewater at alkaline pH values creates waste chemical sludge (e.g., Ni(OH)2). We herein focused on Ni removal via chemical reduction using dithionite, by converting Ni(II) to its elemental or other valuable forms. Without the presence of a chelator (e.g., citrate), the nickel reduction efficiency increased with increasing dithionite:Ni molar ratio, reaching ∼99% at ratios above 3:1. The effect of pH on Ni reduction was in agreement with the standard redox potentials (pe0) of dithionite, which became more negative with an increase in pH leading to greater Ni reduction efficiencies. With the formation of Ni-citrate chelates, however, the Ni reduction deteriorated. Elevated pH and temperature improved nickel reduction, due to the greater reducing power of dithionite. The optimal pH value for Ni(II) reduction was found to be ∼8. Injecting Cu seed particles enhanced the rate and amount of Ni reduced. NiS and Ni3S2 were identified in the crystal of the resulting solids by X-ray crystallography, and the presence of elemental Ni was explained by X-ray photoelectron spectroscopy. The chemical reduction of actual printed circuit board wastewater with the dithionite:Ni(II) molar ratio dose of 12:1 retrieved ∼99% nickel after 30-min reaction at 40°C.