Negative regulation of floral transition in Arabidopsis by HOS15-PWR-HDA9 complex.

Arabidopsis HOS15/PWR/HDA9 repressor complex, which is similar to the TBL1/NcoR1/HDAC complex in animals, plays a well-known role in epigenetic regulation. PWR and HDA9 have been reported to interact with each other and modulate the flowering time by repressing AGL19 expression, whereas HOS15 and HDA9, together with the photoperiodic evening complex, regulate flowering time through repression of GI transcription. However, the role of the HOS15/PWR/HDA9 core repressor complex as a functional unit in the regulation of flowering time is yet to be explored. In this study, we reported that the loss-of-function hos15-2/pwr/hda9 triple mutant accumulates higher transcript levels of AGL19 and exhibits an early flowering phenotype similar to those of hos15, pwr, and hda9 single mutants. Interestingly, the accumulation of HOS15 in the nucleus was drastically reduced in pwr and hda9 mutants. As a result, HOS15 could not perform its role in histone deacetylation or interaction with H3 in the nucleus. Furthermore, HOS15 is also associated with the same region of the AGL19 promoter known for PWR-HDA9 binding. The acetylation level of the AGL19 promoter was increased in the hos15-2 mutant, similar to the pwr and hda9 mutants. Therefore, our findings reveal that the HOS15/PWR/HDA9 repressor complex deacetylates the promoter region of AGL19, thereby negatively regulating AGL19 transcription, which leads to early flowering in Arabidopsis.

HOS15-PWR chromatin remodeling complex positively regulates cold stress in Arabidopsis.

Cold stress is a major environmental constraint that restrains plant growth and productivity. To cope with cold stress, plants must be able to perceive a cold signal and regulate the expression of cold-regulated (COR) genes. In our recent study, we showed that Arabidopsis HIGH EXPRESSION OF OSMOTICALLY RESPONSIVE GENE 15 (HOS15) acts as a substrate receptor for CULLIN4-based ubiquitin E3 ligase complex to promote cold-induced histone deacetylase 2 C (HD2C) degradation that allows the activation of COR genes. Additionally, we found that POWERDRESS (PWR), a HOS15-interacting protein, is required for the association of HOS15 with COR gene chromatin and HD2C degradation. The HOS15/PWR complex interacts with and recruits CBF transcription factors to the promoters of COR genes. Collectively, our previous findings suggest that HOS15 and PWR function as positive regulators for the expression of COR genes, and promote cold tolerance. Accordingly, we herein discuss the role of PWR in cold tolerance.

The Histone-Modifying Complex PWR/HOS15/HD2C Epigenetically Regulates Cold Tolerance.

Cold stress is a major environmental stress that severely affects plant growth and crop productivity. Arabidopsis (Arabidopsis thaliana) HIGH EXPRESSION OF OSMOTICALLY RESPONSIVE GENE15 (HOS15) is a substrate receptor of the CULLIN4-based CLR4 ubiquitin E3 ligase complex, which epigenetically regulates cold tolerance by degrading HISTONE DEACETYLASE2C (HD2C) to switch from repressive to permissive chromatin structure in response to cold stress. In this study, we characterized a HOS15-binding protein, POWERDRESS (PWR), and analyzed its function in the cold stress response. PWR loss-of-function plants (pwr) showed lower expression of cold-regulated (COR) genes and sensitivity to freezing. PWR interacts with HD2C through HOS15, and cold-induced HD2C degradation by HOS15 is diminished in the pwr mutant. The association of HOS15 and HD2C to promoters of cold-responsive COR genes was dependent on PWR. Consistent with these observations, the high acetylation levels of histone H3 by cold-induced and HOS15-mediated HD2C degradation were significantly reduced in pwr under cold stress. PWR also interacts with C-repeat element-binding factor transcription factors to modulate their cold-induced binding to the promoter of COR genes. Collectively, our data signify that the PWR-HOS15-HD2C histone-modifying complex regulates the expression of COR genes and the freezing tolerance of plants.

Pyrometamorphic process of ceramic composite materials in pottery production in the Bronze/Iron Age of the Northern Caucasus (Russia).

Pyrotechnology for the prehistoric pottery has been an important subject for the study of ancient production technology and technological styles. However, heterogeneous characteristics in chemical and mineralogical compositions and massive amounts of ceramic sherds at most archaeological sites make it difficult to identify production technologies. In this study, SEM-EDS/WDS, XRD and transmittance and reflectance FT-IR techniques were employed step by step, in order to overcome these limitations. The serial combination of each method covers a macro-, meso- and micro-scale and it enabled us to identify the relationship between firing temperature, reducing or oxidizing atmosphere and thermally induced mobility of Ca and Fe. Numerous ceramic pottery sherds from two archaeological sites in the North Caucasus, Ransyrt 1 (Middle-Late Bronze Age) and Kabardinka 2 (Late Bronze/Early Iron Age) were investigated and compared to the ceramics found at Levinsadovka and Saf'janovo around the Sea of Azov, Russia (Late/Final Bronze Age) for this purpose. Morphological changes by sintering and transformation of indicator minerals such as calcite, hematite, spinel, gehlenite, quartz and cis/trans-vacant 1M illite provide temperature thresholds at 675, 700, 750, 950, 1050, 1100, 1300 °C. With the laboratory based FT-IR, vibrational changes in shape, wavenumber and intensity corresponding to Si-O stretching bands yield an order and classification of the ceramics with regard to firing conditions between the samples as well as the unraveling of temperature profiles within a single sample in a 100 µm scale. With this approach, the number of archaeological ceramics could be classified according to the pyrometamorphic transformation of heterogeneous ceramic composite materials. Combined with the archaeological contexts of each site, these results will contribute to the reconstruction of local technological styles.

Spontaneous Spinal Subdural Hematoma causing Brown-Séquard Syndrome with Thrombocytopenic Myelodysplastic Syndrome.

Spontaneous spinal subdural hematoma (SSDH) is a very rare condition. We report a case of SSDH presenting with Brown-Séquard syndrome, treated by surgical evacuation. A 77-year-old woman was hospitalized for back pain without trauma history. As she showed progressive sensory loss and right-side dominant paraparesis, we performed magnetic resonance imaging and confirmed the SSDH in the thoracic area. Therefore, she underwent emergent operation and the hematoma was evacuated successfully. After the operation, the patient showed improvement in neurologic function.

Preliminary study of neurocognitive dysfunction in adult moyamoya disease and improvement after superficial temporal artery-middle cerebral artery bypass.

OBJECTIVE: Moyamoya disease (MMD) is a chronic cerebrovascular occlusive disease of unknown etiology. In addition, the neurocognitive impairment of adults with MMD is infrequently reported and, to date, has not been well described. We attempted to determine both the neurocognitive profile of adult moyamoya disease and whether a superficial temporal artery-middle cerebral artery (STA-MCA) anastomosis can improve the neurocognitive impairment in exhibiting hemodynamic disturbance without stroke. METHODS: From September 2010 through November 2012, 12 patients with angiographically diagnosed MMD underwent STA-MCA anastomosis for hemodynamic impairment. Patients with hypoperfusion and impaired cerebrovascular reserve (CVR) capacity but without evidence of ischemic stroke underwent a cognitive function test, the Seoul Neuropsychological Screening Battery (SNSB). Five patients agreed to undergo a follow-up SNSB test. Data from preoperative and postoperative neurocognitive function tests were compared and analyzed. RESULTS: Five of 12 patients were enrolled. The median age was 45 years (range, 24-55 years). A comparison of preoperative to postoperative status of SNSB, memory domain, especially delayed recall showed significant improvement. Although most of the domains showed improvement after surgery, the results were not statistically significant. CONCLUSION: In our preliminary study, large proportions of adult patients with MMD demonstrate disruption of cognitive function. This suggests the possibility of chronic hypoperfusion as a primary cause of the neurocognitive impairment. When preoperative and postoperative status of cognitive function was compared, memory domain showed remarkable improvement. Although further study is needed, neurocognitive impairment may be an indication for earlier intervention with reperfusion procedures that can improve cognitive function.

Endoscope-assisted microsurgical removal of an epidermoid tumor within the cavernous sinus.

Epidermoid tumor of the cavernous sinus is rare. The aim of this case report is to discuss the role of neuroendoscopes in the removal of such lesions. A 21-year-old man presented with 6-year history of progressive headache, diplopia, and visual disturbance. Work-up revealed an epidermoid tumor located in the right cavernous sinus. An extradural transcavernous approach was utilized via a traditional frontotemporal craniotomy with endoscopic assistance. The postoperative course was uneventful with immediate improvement of the patient's headache. Postoperative magnetic resonance imaging demonstrated complete removal of the tumor. There were no signs of recurrence during a 2-year follow-up period. The endoscope is a useful tool for removing epidermoid tumors from the cavernous sinus and enhances visualization of areas that would otherwise be difficult to visualize with microscopes alone. Endoscopes also help minimize the retraction of neurovascular structures.

Repair of diaphyseal bone defects with calcitriol-loaded PLGA scaffolds and marrow stromal cells.

Calcitriol (1,25(OH)2D3)-loaded porous poly(D,L-lactide-co-glycolide) (PLGA) scaffolds prepared by solvent casting/salt leaching method were used to repair a 1.5 cm diaphyseal segmental bone defect as a fully absorbable osteogenic biomaterial. The in vitro release of sulforhodamine B (SRB) from PLGA scaffold was measured using spectrophotometer, considering SRB as a model drug. The SRB released from SRB-incorporated PLGA scaffold during 3 months was with relatively low initial burst. The calcitriol-loaded PLGA scaffolds with or without marrow stromal cells (MSCs) were implanted in a critical-sized intercalated bone defect in rabbit femur. Defects were assessed by radiographs until 9 weeks. The bony union of the defect was observed only in the calcitriol-loaded groups. RT-PCR results indicated that MSCs, which were seeded into calcitriol-loaded scaffold, expressed an increased level of alkaline phosphatase, osteonectin, and type I collagen mRNA at day 10. After 2 and 4 weeks, the implanted scaffolds were evaluated by histology. New osteoid matrix and direct calcium deposits were more evident in calcitriol/PLGA/MSC group. Three-dimensional computed tomography and frontal tomographic images of repaired femur showed that normal femur anatomy had been restored with cortical bone with no implanted PLGA remnants at 20 weeks. It can be concluded that the porous calcitriol-loaded PLGA scaffold combined with MSCs may be a novel method for repairing the large loaded bone defect.

Protein array consisting of sol-gel bioactive platform for detection of E. coli O157:H7.

Sol-gel-derived bioactive platform was fabricated for detection of pathogenic microbes, E. coli O157:H7. Design flexibility of sol-gel technique and ease of fabrication can fulfill to create the surfaces with structural and chemical features that are compatible with biomaterials such as antibody, enzymes, etc. In this study, the bioactive platform was prepared based on the silica gels, which were produced by hydrolyzing tetraethylorthosilane (TEOS) in ethanol. The mercaptopropyl triethoxysilane (MPTS) was mixed with the TEOS solution for the surface functionalization of bioactive platform. During TEOS hydrolysis, the modified thin film was prepared by sol-gel dip coating. Antibody against E. coli O157:H7 was immobilized with a configuration of protein array using piezo-type dispensing system. Surface morphology of the prepared bioactive platform was analyzed using atomic force microscopy (AFM). The antibody-antigen interaction was investigated with fluorescence microscopy and sandwich type immunoassay using fluorescein isothiocyanate (FITC)-labeled antibody. The results showed that antibody was sequestered within the sol-gel-derived bio-gel due to physical adsorption. The measurement of E. coli O157:H7 was done using the fabricated antibody surface. The fluorescence intensity was proportional to the concentration of E. coli O157:H7, of which the detection limit was 10(2)CFU/ml.

Response of MG63 osteoblast-like cells onto polycarbonate membrane surfaces with different micropore sizes.

Response of different types of cells on materials is important for the applications of tissue engineering and regenerative medicine. It is recognized that the behavior of the cell adhesion, proliferation, and differentiation on materials depends largely on surface characteristics such as wettability, chemistry, charge, rigidity, and roughness. In this study, we examined the behavior of MG63 osteoblast-like cells cultured on a polycarbonate (PC) membrane surfaces with different micropore sizes (0.2-8.0 microm in diameter). Cell adhesion and proliferation to the PC membrane surfaces were determined by cell counting and MTT assay. The effect of surface micropore on the MG63 cells was evaluated by cell morphology, protein content, and alkaline phosphatase (ALP) specific activity. It seems that the cell adhesion and proliferation were progressively inhibited as the PC membranes had micropores with increasing size, probably due to surface discontinuities produced by track-etched pores. Increasing micropore size of the PC membrane results in improved protein synthesis and ALP specific activity in isolated cells. There was a statistically significant difference (P<0.05) between different micropore sizes. The MG63 cells also maintained their phenotype under conditions that support a round cell shape. RT-PCR analysis further confirmed the osteogenic phenotype of the MG63 cells onto the PC membranes with different micropore sizes. In results, as micropore size is getting larger, cell number is reduced and cell differentiation and matrix production is increased. This study demonstrated that the surface topography plays an important role for phenotypic expression of the MG63 osteoblast-like cells.