RESUMO
This study explored the innovative application of wood bottom ash (WBA) as an adsorbent for arsenic (As) removal from wastewater, focusing on the adsorption mechanism and optimisation of the operational conditions. Comprehensive spectroscopic analyses, including FE-SEM/EDS, BET, XRF, XRD, FT-IR, and XPS, were performed to examine the elemental and mineralogical changes in WBA before and after As adsorption. The study assessed the adsorption kinetics and isotherms, revealing that As adsorption reached equilibrium within 48 h, with a maximum capacity of 121.13 mg/g. The adsorption process followed a pseudo-second-order kinetic model and aligned well with the Langmuir isotherm, indicating that the process is governed by chemisorption and occurs as monolayer adsorption. The primary removal mechanism was the surface precipitation of amorphous calcium arsenate. Response surface methodology was employed to analyse and optimise the factors influencing As removal, including solution pH, ionic strength, adsorbent dose and reaction time. The optimal conditions for maximum As removal were pH 7.11, 8.37 mM ionic strength, 9.08 g/L WBA dose, and 2.58 h reaction time. This study offers novel insights into the efficient and cost-effective use of WBA for As removal, highlighting its potential as a sustainable solution for wastewater treatment in developing countries.
RESUMO
The effective treatment of cadmium (Cd) in smelting wastewater is of great industrial importance. This study investigates the efficient removal of Cd from real industrial smelting wastewater via chemical precipitation using a series of experiments. In particular, the effects of different precipitants, agitation conditions, and the addition of NaOCl on Cd removal and pH variation are investigated. CaO (3.75 g/L), NaOH (3.50 g/L), and Ca(OH)2 (3.75 g/L) are found to be effective in elevating the wastewater pH and achieving high Cd removal rates (>99.9%), while the use of NaOH as a precipitant maintains a high Cd removal rate even at low agitation intensities. The properties of the produced sludge and supernatant are also determined using moisture content, particle size, and sludge leaching analyses due to the importance of economic and environmental sustainability in filtration, dewatering, and waste disposal processes. In addition, the addition of 2% NaOCl is tested, revealing that it can improve the Cd removal efficiency of Ca(OH)2, thus potentially reducing processing costs and enhancing the environmental benefits. Overall, these findings offer valuable insights into the removal of Cd from smelting wastewater, with potential implications for both environmental sustainability and economic viability. PRACTITIONER POINTS: CaO, NaOH, and Ca(OH)2 effectively remove Cd (>99.9%) from smelting wastewater. The use of NaOH leads to high Cd removal rates even at low agitation speeds. Adding 2% NaOCl can reduce the Ca(OH)2 dose for more economical Cd removal.
Assuntos
Cádmio , Precipitação Química , Resíduos Industriais , Oxirredução , Águas Residuárias , Poluentes Químicos da Água , Cádmio/química , Poluentes Químicos da Água/química , Águas Residuárias/química , Eliminação de Resíduos Líquidos/métodos , Purificação da Água/métodos , Concentração de Íons de Hidrogênio , Hidróxido de Cálcio/químicaRESUMO
In the face of increasing nitrogen demand for crop cultivation driven by population growth, this study presents a sustainable solution to address both the heightened demand and the energy-intensive process of nitrogen removal from wastewater. Our approach involves the removal of nitrogen from wastewater and its subsequent return to the soil as a fertilizer. Using biochar derived from Aesculus turbinata fruit shells (ATFS), a by-product of post-medical use, we investigated the effect of pyrolysis temperature on the NH4-N adsorption capacity of ATFS biochar (ATFS-BC). Notably, the ATFS-BC pyrolyzed at 300 °C (ATFS-BC300) exhibited the highest NH4-N adsorption capacity of 15.61 mg/g. The superior performance of ATFS-BC300 was attributed to its higher number of oxygen functional groups and more negatively charged surface, which contributed to the enhanced NH4-N adsorption. The removal of NH4-N by ATFS-BC300 involved both physical diffusion and chemisorption, with NH4-N forming a robust multilayer adsorption on the biochar. Alkaline conditions favored NH4-N adsorption by ATFS-BC300; however, the presence of trivalent and divalent ions hindered this process. Rice plants were cultivated to assess the potential of NH4-N adsorbed ATFS-BC300 (NH4-ATFS-BC300) as a nitrogen fertilizer. Remarkably, medium doses of NH4-ATFS-BC300 (594.5 kg/ha) exhibited key agronomic traits similar to those of the commercial nitrogen fertilizer in rice seedlings. Furthermore, high doses of NH4-ATFS-BC300 demonstrated superior agronomic traits compared to the commercial fertilizer. This study establishes the viability of utilizing ATFS-BC300 as a dual-purpose solution for wastewater treatment and nitrogen fertilizer supply, presenting a promising avenue for addressing environmental challenges.
Assuntos
Amônia , Carvão Vegetal , Estudos de Viabilidade , Fertilizantes , Nitrogênio , Águas Residuárias , Carvão Vegetal/química , Águas Residuárias/química , Amônia/química , Adsorção , Frutas/química , Poluentes Químicos da Água/análise , Oryza/crescimento & desenvolvimento , Eliminação de Resíduos Líquidos/métodosRESUMO
Algal blooms contribute to water quality degradation, unpleasant odors, taste issues, and the presence of harmful substances in artificially constructed weirs. Mitigating these adverse effects through effective algal bloom management requires identifying the contributing factors and predicting algal concentrations. This study focused on the upstream region of the Seungchon Weir in Korea, which is characterized by elevated levels of total nitrogen and phosphorus due to a significant influx of water from a sewage treatment plant. We employed four distinct machine learning models to predict chlorophyll-a (Chl-a) concentrations and identified the influential variables linked to local algal bloom events. The gradient boosting model enabled an in-depth exploration of the intricate relationships between algal occurrence and water quality parameters, enabling accurate identification of the causal factors. The models identified the discharge flow rate (D-Flow) and water temperature as the primary determinants of Chl-a levels, with feature importance values of 0.236 and 0.212, respectively. Enhanced model precision was achieved by utilizing daily average D-Flow values, with model accuracy and significance of the D-Flow amplifying as the temporal span of daily averaging increased. Elevated Chl-a concentrations correlated with diminished D-Flow and temperature, highlighting the pivotal role of D-Flow in regulating Chl-a concentration. This trend can be attributed to the constrained discharge of the Seungchon Weir during winter. Calculating the requisite D-Flow to maintain a desirable Chl-a concentration of up to 20 mg/m3 across varying temperatures revealed an escalating demand for D-Flow with rising temperatures. Specific D-Flow ranges, corresponding to each season and temperature condition, were identified as particularly influential on Chl-a concentration. Thus, optimizing Chl-a reduction can be achieved by strategically increasing D-Flow within these specified ranges for each season and temperature variation. This study highlights the importance of maintaining sufficient D-Flow levels to mitigate algal proliferation within river systems featuring weirs.
Assuntos
Monitoramento Ambiental , Rios , Temperatura , Clorofila A , Clorofila/análise , Qualidade da Água , Eutrofização , Nitrogênio/análise , Fósforo/análise , ChinaRESUMO
The surface hydrophilicity of a photocatalyst is an important factor that directly influences its interactions with organic pollutants and significantly impacts its degradation. In this study, we investigated the impact of increased hydrophilicity of g-C3N4 (CN) by alkaline solvothermal treatment on the degradations of three antibiotics (oxytetracycline (OTC), oxolinic acid (OA), and sulfamethoxazole (SMX)) with different log Kow values. Scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), and Fourier-transform infrared (FT-IR) spectroscopy showed no significant differences in the morphology, crystalline structure, and surface functional groups of CN after alkaline solvothermal treatment (Nv-HPCN). However, contact angle analysis revealed that Nv-HPCN (31.8°) was more hydrophilic than CN (61.1°). To assess the hydrophilicity of the antibiotics, the log Kow values of SMX (0.77), OA (0.43), and OTC (-0.34) were measured. Nv-HPCN showed faster OTC degradation than CN, whereas the opposite pattern was observed for the degradation of OA. Scavenger tests showed that O2â¢- and h+ mainly contributed to the degradation of these antibiotics. Furthermore, the influences of NOM and coexisting anions on antibiotic degradation were investigated. This study thus offers perspectives on the impact of surface hydrophilicity of photocatalysts on the degradation of antibiotics.
Assuntos
Grafite , Compostos de Nitrogênio , Oxitetraciclina , Antibacterianos/química , Espectroscopia de Infravermelho com Transformada de Fourier , Oxitetraciclina/química , Grafite/química , CatáliseRESUMO
A large amount of manure is generated from concentrated animal feeding operations (CAFOs), leading to serious environmental issues and hazardous risks from pathogens, such as methicillin-resistant Staphylococcus aureus. Therefore, developing an effective method for manure disposal is essential. Thus, in this study, we suggest the use of CO2 in pyrolysis of hen manure (HM) as an effective method to convert the carbon in HM into syngas (especially carbon monoxide (CO)). HM was used and tested as the model compound. From the results of thermo-gravimetric analysis, the decarboxylation of CaCO3 in HM in the presence of N2 was realized at temperatures ranging from 638 to 754 °C. The Boudouard reaction was observed at ≥ 664 °C in the presence of CO2. Despite the lack of occurrence of the Boudouard reaction, more CO formation was observed in the presence of CO2 at ≥ 460 °C. This was deemed as a homogeneous reaction induced by CO2. Considering the high Ca content of HM, HM biochar in N2 and CO2 were used as adsorbent for removal of Cadmium (Cd), which is toxic heavy metal. The adsorption capacities of HM_N2 and HM_CO2 were 302.4 and 95.7 mg g-1, respectively. The superior performance of HM_N2 is mainly attributed to the presence of Ca(OH)2, which provides favorable (alkaline) conditions for precipitation and ion exchange. Our results indicate the environmental benefits from using CO2. Specifically, CO2 (representative greenhouse gas) converted into fuel. Given this, pyrolysis of HM in the presence of CO2 was achieved at ≤ 640 °C, and the atmospheric condition should be switched from CO2 to N2 at ≥ 640 °C to ensure the decarboxylation of CaCO3.
Assuntos
Cádmio , Staphylococcus aureus Resistente à Meticilina , Animais , Feminino , Esterco , Pirólise , Dióxido de Carbono , Galinhas , Carvão VegetalRESUMO
This study was set to investigate the effects of rice husk biochar (RHB) on soil characteristics and growth of lettuce (Lactuca sativa). A comprehensive research approach was employed to examine the effect of different RHB concentrations (i.e., 0-1.5%) on soil pH, soil enzyme activities (i.e., alkaline phosphatase, beta-glucosidase, and dehydrogenase), soil microbial community, lettuce growth, and earthworm toxicity. The results showed that, within the studied RHB concentration range, the RHB application did not have significant effects on the soil pH. However, the enzyme activities were increased with increasing RHB concentration after the 28 d-lettuce growth period. The RHB application also increased the abundances of the bacterial genera Massilia and Bacillus and fungal genus Trichocladium having the plant growth promoting abilities. Furthermore, the study revealed that the root weight and number of lettuce leaves were significantly increased in the presence of the RHB, and the growth was dependent on the RHB concentration. The improved lettuce growth can be explained by the changes in the enzyme and microbial dynamics, which have resulted from the increased nutrient availability with the RHB application. Additionally, the earthworm toxicity test indicated that the tested RHB concentrations can be safely applied to soil without any significant ecotoxicity. In conclusion, this study underscores the potential of RHB as a soil amendment with positive effects on crop growth, highlighting the utilization of agricultural byproducts to enhance soil biological quality and plant growth through biochar application.
Assuntos
Oryza , Poluentes do Solo , Solo , Lactuca , Agricultura , Carvão Vegetal/farmacologia , Poluentes do Solo/toxicidade , Poluentes do Solo/análiseRESUMO
The use of photocatalysts in continuous stirred tank reactor (CSTR) systems allows for efficient and continuous water treatment, thus meeting the demand for scalable technology and comparative data in large-scale implementations. Hence, this study aims to explore the feasibility of a floating photocatalyst within a CSTR system for continuous water treatment. An expanded polystyrene (EPS)-TiO2 composite was synthesized following established methodologies, and their efficacy in removing the water pollutant methylene blue (MB) was compared for both batch and CSTR systems. A nonlinear first-order model was identified as the most suitable approach to accurately simulate MB degradation under experimental conditions, and the calculated pseudo-first-order degradation rate constant (k') for the CSTR system (0.0126-0.0172/min) was found to be superior to that observed for the batch system (0.0113/min). In addition, an increase in the flow rate reduced the retention time, leading to lower MB removal efficiency for the CSTR system. In addition, the EPS-TiO2/UV system with a CSTR configuration was found to efficiently use light and energy based on the calculated quantum yield (Φ = 2.86 × 10-4) and electrical energy per order (EEO = 857.46 kWh/m3/order). The findings of this study contribute to the development of sustainable and efficient water treatment strategies, offering valuable insight into the implementation of practical water treatment processes.
Assuntos
Reatores Biológicos , Purificação da Água , Titânio , EletricidadeRESUMO
Fenton sludge is a byproduct of the Fenton process that contains large amounts of Fe and Ca. Because of the secondary contamination generated during the disposal of this byproduct, ecofriendly treatment methods are needed. In this study, we used Fenton sludge to remove the Cd discharged from a zinc smelter factory, using thermal activation to enhance the Cd adsorption capacity. Among the various temperatures considered (300-900 °C), the Fenton sludge that was thermally activated at 900 °C (TA-FS-900) adsorbed the highest amount of Cd because of its high specific surface area and high Fe content. Cd was adsorbed onto TA-FS-900 via complexation with C-OH, C-COOH, FeO-, and FeOH and cation exchange with Ca2+. The maximum adsorption of TA-FS-900 was 260.2 mg/g, indicating that TA-FS-900 is an efficient adsorbent, comparable to those reported in the literature. The initial Cd concentration in the zinc smelter wastewater discharged was 105.7 mg/L, 98.4% of which was removed by applying TA-FS-900, suggesting the applicability of TA-FS-900 for real wastewater containing high concentrations of various cations and anions. The leaching of heavy metals from TA-FS-900 was within the EPA standard limits. We concluded that the environmental impact of Fenton sludge disposal can be reduced, and the use of Fenton sludge can add value to the treatment of industrial wastewater in terms of the circular economy and environment.
Assuntos
Águas Residuárias , Poluentes Químicos da Água , Esgotos , Zinco , Cádmio , Estudos de Viabilidade , Eliminação de Resíduos Líquidos/métodos , AdsorçãoRESUMO
Quercus wood was used for thermal energy production, and wood bottom ash (WDBA) was used as a medium for water purification and soil fertilizer in accordance with the recently proposed food-water-energy nexus concept. The wood contained a gross calorific value of 14.83 MJ kg-1, and the gas generated during thermal energy production has the advantage of not requiring a desulfurization unit due to its low sulfur content. Wood-fired boilers emit less CO2 and SOX than coal boilers. The WDBA had a Ca content of 66.0%, and Ca existed in the forms of CaCO3 and Ca(OH)2. WDBA absorbed P by reacting with Ca in the form of Ca5(PO4)3OH. Kinetic and isotherm models revealed that the results of the experimental work were in good agreement with the pseudo-second-order and Langmuir models, respectively. The maximum P adsorption capacity of WDBA was 76.8 mg g-1, and 6.67 g L-1 of WDBA dose could completely remove P in water. The toxic units of WDBA tested using Daphnia magna were 6.1, and P adsorbed WDBA (P-WDBA) showed no toxicity. P-WDBA was used as an alternative P fertilizer for rice growth. P-WDBA application resulted in significantly greater rice growth in terms of all agronomic values compared to N and K treatments without P. This study proposed the utilization of WDBA, obtained from thermal energy production, to remove P from wastewater and replenish P in the soil for rice growth.
Assuntos
Fósforo , Águas Residuárias , Fertilizantes , Adsorção , Solo , Cinza de Carvão , ÁguaRESUMO
This study addresses ways to circulate the flow of phosphorus (P) from water to soil to improve water quality and provide a sustainable supply of P into soil. Here, bottom ash (BA_CCM), the byproduct of the combustion of cattle manure, which is performed for obtaining energy, was used to remove P in wastewater. Next, the P-captured BA_CCM was used as P fertilizer for rice growth. BA_CCM was primarily composed of Ca (49.4%), C (24.0%), and P (9.9%), and the crystalline phases of Ca were calcium carbonate (CaCO3) and hydroxyapatite (Ca5(PO4)3OH). The mechanism of P removal by BA_CCM involves the formation of hydroxyapatite by reacting Ca2+ with PO43-. A reaction time of 3 h was required to achieve P adsorption to BA_CCM, and the maximum P adsorption capacity of BA_CCM was 45.46 mg/g. The increase in solution pH reduced P adsorption. However, at pH > 5, the P adsorption amount was maintained regardless of the pH increase. The presence of 10 mM SO42- and CO32- reduced P adsorption by 28.4% and 21.5%, respectively, and the impact of the presence of Cl- and NO3- was less than 10%. The feasibility of BA_CCM was tested using real wastewater, and 3.33 g/L of BA_CCM dose achieved a P removal ratio of 99.8% and a residual concentration of <0.02 mg/L. The toxicity unit of BA_CCM determined for Daphnia magna (D. magna) was 5.1; however, the BA_CCM after P adsorption (P-BA_CCM) did not show any toxicity to D. magna. BA_CCM after P adsorption was used as an alternative to commercial P fertilizer. Rice fertilized with a medium level of P-BA_CCM showed better agronomic values for most agronomic traits, except root length, than that seen with the commercial P fertilizer. This study suggests that BA_CCM can be used as a value-added product to address environmental issues.
Assuntos
Oryza , Fósforo , Bovinos , Animais , Fósforo/química , Solo , Cinza de Carvão , Esterco , Fertilizantes , Águas Residuárias , Adsorção , HidroxiapatitasRESUMO
Photocatalysis offers opportunities to degrade recalcitrant organic pollutants without adding treatment chemicals. Nitrogen (N) vacancy is an effective point-defect engineering strategy to mitigate electron-hole recombination and facilitate hydroxyl radical (â¢OH) production via superoxide radical (O2â¢-) generation during photocatalytic application of graphitic carbon nitride (g-C3N4). Here, we report a novel strategy for fabrication of N-vacancy-rich g-C3N4 (NvrCN) via post-solvothermal treatment of Mg-doped g-C3N4. The addition of the Mg precursor during the polycondensation of urea created abundant amine sites in the g-C3N4 framework, which facilitates formation of N vacancies during post-solvothermal treatment. Elemental analysis and electron paramagnetic resonance spectra confirmed a higher abundance of N vacancies in the resultant NvrCN. Further optical and electronic analyses revealed the beneficial role of N vacancies in light-harvesting capacity, electron-hole separation, and charge transfer. N vacancies also provide specific reaction centers for O2 molecules, promoting oxygen reduction reaction (ORR). Therefore, â¢OH generation increased via enhanced formation of H2O2 under visible light irradiation, and NvrCN photocatalytically degraded oxytetracycline 4-fold faster with degradation rate constant of 1.85 × 10-2 min-1 (light intensity = 1.03 mW/cm2, catalyst concentration = 0.6 g/L, oxytetracycline concentration = 20 mg/L) than pristine g-C3N4. Overall, this study provides a facile method for synthesizing N-vacancy-rich g-C3N4 and elucidates the role of the defect structure in enhancing the photocatalytic activity of g-C3N4.
RESUMO
In this study, we optimized and explored the effect of the conditions for synthesizing Fe-loaded food waste biochar (Fe@FWB) for Cr(VI) removal using the response surface methodology (RSM) and artificial neural network (ANN). The pyrolysis time, temperature, and Fe concentration were selected as the independent variables, and the Cr(VI) adsorption capacity of Fe@FWB was maximized. RSM analysis showed that the p-values of pyrolysis temperature and Fe concentration were less than 0.05, indicating that those variables were statically significant, while pyrolysis time was less significant due to its high p-value (0.2830). However, the ANN model results showed that the effect of pyrolysis time was more significant on Cr(VI) adsorption capacity than Fe concentration. The optimal conditions, determined by the RSM analysis with a lower sum of squared error than ANN analysis, were used to synthesize the optimized Fe@FWB (Fe@FWB-OPT) for Cr(VI) removal. From the equilibrium model fitting, the Langmuir model showed a better fit than the Freundlich model, while the Redlich-Peterson isotherm model overlapped. The Cr(VI) sorption capacity of Fe@FWB-OPT calculated from the Langmuir model was 377.71 mg/g, high enough to be competitive to other adsorbents. The kinetic Cr(VI) adsorption was well described by the pseudo-second-order and Elovich models. The XPS results showed that Cr adsorbed on the surface of Fe-FWB-OPT was present not only as Cr(VI) but also as Cr(III) by the reduction of Cr(VI). The results of Cr(VI) adsorption by varying the pH indicate that electrostatic attraction is a key adsorption mechanism.
Assuntos
Eliminação de Resíduos , Poluentes Químicos da Água , Adsorção , Carvão Vegetal/química , Cromo/análise , Alimentos , Cinética , Redes Neurais de Computação , Poluentes Químicos da Água/análiseRESUMO
This work investigates the applicability of thermally treated calcium-rich minerals (CRMs), such as sepiolite (SPL), attapulgite (ATT), and dolomite (DLM) to hinder the nitrogen (N) and phosphorus (P) release from river sediments. A non-woven fabric mat (NWFM) or a sand layer were also capped as armor layers, i.e., placed over CRMs to investigate the capping impact on the N/P release. The capping efficiency was evaluated in a cylindrical reactor, consisting of CRMs, armor layers, sediments, and sampled water. We monitored N/P concentrations, dissolved oxygen (DO), oxidation reduction potential, pH, and electric conductivity in overlying water over 70 days. The DO concentrations in the uncapped and capped conditions were preserved for 30 days and 70 days (until the end of experiment duration), respectively. ATT showed higher efficiency for NH4-N and T-N than the other two materials, and the capping efficiency of NH4-N was measured as 96.4%, 93.7%, and 61.6% when capped with 2-cm sand layer, 1-cm sand layer, and NWFM layer, respectively. DLM showed a superior rejection capability of PO4-P to ATT and SPL, reported as 97.2% when capped with 2-cm sand armor. The content of weakly adsorbed-P was lower in the uncapped condition than in the capping condition. It can be concluded that ATT and DLM can be used as capping agents to deactivate N and P, respectively, to reduce water contamination from sediments of the eutrophic river.
Assuntos
Areia , Poluentes Químicos da Água , Cálcio , Sedimentos Geológicos/química , Minerais , Fósforo/química , Rios , Água , Poluentes Químicos da Água/análiseRESUMO
Phosphorus, a limiting element, is essential for living organisms, but the total amount available is decreasing with its increasing use. This problem can be solved by studying the methods of phosphorus recovery from waste. Phosphorus (P2O5, 13.75%) is abundantly present in cattle manure bottom ash (CMBA), indicating its potential as a source for phosphorus recovery. Herein, phosphorus recovery from CMBA was investigated by acid extraction and precipitation methods. The optimum concentration of sulfuric acid for extraction was 1.4 M, which eluted approximately 90% of the phosphorus contained in CMBA. In the precipitation method, sodium hydroxide and calcium silicate hydrate (CSH, CaSiO3ânH2O) were used to adjust the solution pH to 4 and 8, where more than 99% of the eluted phosphorus was recovered when the pH was adjusted to 8 using CSH alone. The chemical composition and crystal forms of the recovered precipitates were analyzed using X-ray fluorescence and an X-ray powder diffractometer. The results indicated monetite and brushite were the main crystal forms of precipitates at pH 4, and struvite, hydroxyapatite, and tricalcium phosphate were the main crystal forms at pH 8. The availability of phosphorus in the precipitates was also evaluated by quinoline gravimetric analysis using water and 2% citric acid, and the water-soluble precipitate was less than 35%, whereas it ranged from 65 to 97% in 2% citric acid. This study suggests that CMBA can be used as a promising source to recover phosphorus via acid extraction and precipitation processes.
Assuntos
Esterco , Fósforo , Animais , Bovinos , Precipitação Química , Ácido Cítrico/análise , Cinza de Carvão , Esterco/análise , Fosfatos/análise , Fósforo/análise , Estruvita/química , Eliminação de Resíduos Líquidos/métodos , ÁguaRESUMO
The response surface methodology (RSM) was found useful statistical tool for understanding combined effect of filtration, backwashing time and dosage of sodium hypochlorite (NaOCl) added into backwash water as three operational parameters on transient behavior of transmembrane pressure (TMP) and organic rejection efficiency. Here, encased, hollow-fiber ultrafiltration (UF) system was developed for treating synthetic humic acid (HA) solution. To carry out RSM analysis, experimental matrix was designed by Box-Behnken model. Results showed that the NaOCl dosage for the chemical enhanced backwashing (CEB) as single parameter played most dominant role in fouling mitigation. Effect of hydraulic cleaning by applying the permeate backwashing only without performing the CEB was almost negligible to flush the fouling layer from membrane. Considering two correlated parameters, backwashing time combined with NaOCl dosage was found much more important than combination of other parameter such as filtration time to reduce fouling rate. Regardless of the operational parameters, the organic rejection efficiency was maintained 30% only. The RSM analysis also found that 40.1 min of filtration, 1.1 min of backwashing and 834 mg/L of NaOCl were optimum operating parameters to enhance both permeate recovery and fouling mitigation.
Assuntos
Purificação da Água , Filtração , Substâncias Húmicas , Membranas Artificiais , UltrafiltraçãoRESUMO
This study investigated the solution for two environmental issues: excess of P in water and its deficiency in soil, which is restored by transferring the adsorbed P from water into the soil using eggshell as an adsorbent. The eggshells were calcined at different temperatures to improve their adsorption capacity, and evaluated for their physical/chemical properties and P adsorption capacity. The eggshells calcined at 800 °C (CES-800) had the highest P adsorption; CaCO3 decomposed into 23.6% of CaO and 40.8% of Ca(OH)2, eluting more Ca that reacted with soluble P in water. X-ray diffraction analysis confirmed that CES-800 removed P as hydroxylapatite by reacting with Ca. Pseudo-first-order and Langmuir models suitably described the kinetic and equilibrium of P adsorption by CES-800, respectively. The maximum adsorption capacity of CES-800 was 108.2 mg g-1. As the solution pH increased from 3 to 11, the adsorption amount decreased from 99.8 mg g-1 to 62.3 mg g-1. The feasibility of CES-800 as a filter medium was assessed using real lake water under dynamic flow conditions; > 90% of P removal was achieved at 158 h, and the P adsorbed was 11.5 mg g-1. When CES-800 and P adsorbed CES-800 (P-CES-800) were applied to the soil at the studied rates, the earthworms were unaffected by toxicity, suggesting the use of both adsorbents in soil without adverse effects. The shoot fresh weight, tiller number, and total dry weight significantly increased in P-CES-800 applied rice plants compared to the control plants, indicating that P-CES-800 can be a good alternative to conventional P-fertilizer in rice cultivation.
Assuntos
Fósforo , Poluentes Químicos da Água , Adsorção , Animais , Casca de Ovo/química , Fertilizantes , Concentração de Íons de Hidrogênio , Cinética , Solo , Água , Poluentes Químicos da Água/análiseRESUMO
Herein, pyrolysis of cattle manure was conducted to synthesize an effective material for removing heavy metals (e.g., selenium) from water environments. To remove selenate from aqueous solution, iron-impregnated cattle manure biochar (Fe/CM-biochar) was synthesized. The Fe-impregnation was performed by pre-treating cattle manure before its pyrolysis. The pretreatment increased the biochar yield. Influence of various factors such as contacting time, initial selenate concentration, reaction temperature, pH, and presence of coexisting anions were explored by performing batch adsorption experiments. The selenate adsorption reached equilibrium within 15 min. The Langmuir model was better fitted to equilibrium adsorption data than the Freundlich model. The maximum adsorption capacity of Fe/CM-biochar was calculated to be 52.56 mg-Se/g, which is superior to other adsorbents reported in the literature. As the reaction temperature increased in the range (15-35) °C, selenate adsorption on Fe/CM-biochar showed an endothermic and nonspontaneous reaction. The enthalpy change during selenate adsorption was 18.44 kJ/mol, which ranges in physical adsorption. The increase of solution pH (3-11) reduced the selenate adsorption (46.4-37.7 mg-Se/g). The extent of co-existing anion impact on selenate adsorption followed an order of HPO42- > HCO3- > SO42- > NO3-. These results indicate that Fe/CM-biochar is an effective functional material for the removal of selenate from wastewater.
Assuntos
Águas Residuárias , Poluentes Químicos da Água , Adsorção , Animais , Bovinos , Carvão Vegetal , Cinética , Esterco , Ácido Selênico , Poluentes Químicos da Água/análiseRESUMO
In this study, the use of eggshells was suggested as an adsorbent for fluoride removal, and their mechanism of fluoride removal was investigated. The eggshells underwent thermal treatment to improve their adsorption capacity; 800 °C was found to be the optimal temperature for treatment. Eggshells thermally treated at 800 °C (ES-800) were mainly composed of Ca (82.4%) and C (15.9%), and the peaks of ES-800 obtained from X-ray diffraction (XRD) corresponded to calcite, portlandite, and lime. Fluorine adsorption by ES-800 reached 70% of the equilibrium adsorption amount within 15 min and gradually increased until 24 h. The maximum adsorption capacity of ES-800 at pH 7 and 25 °C was 258.28 mg/g, which is 18 times larger than that of activated alumina; this is classified as the best available technology by the United States Environmental Protection Agency. Both enthalpy and entropy increased in the process of fluoride adsorption onto ES-800. Fluoride adsorption of ES-800 decreased from 59.16 to 11.85 mg/g with an increase in pH from 3 to 11. Fluoride adsorption decreased in the presence of anions, whose impact follows the order: HPO43- > HCO3- >> SO42- > Cl-. XRD, and X-ray photoelectron spectroscopy analysis revealed that fluoride removal was achieved by the formation of calcium fluorite (CaF2). Thus, it can be concluded that eggshells can function as highly efficient adsorbents for fluoride removal, replacing bone char and activated alumina; further, their adsorption capacity can be improved by thermal treatment.
Assuntos
Poluentes Químicos da Água , Purificação da Água , Adsorção , Animais , Casca de Ovo , Fluoretos , Concentração de Íons de Hidrogênio , CinéticaRESUMO
This study investigated the applicability of waste antivirus copper film (CF) as a Fenton-like catalyst. The reaction activity of H2O2 and CF in combination was significantly enhanced by ultrasound (US) irradiation, and the synergy factor calculated from bisphenol A (BPA) degradation using CF-H2O2-US was 9.64 compare to that of dual factors. Photoluminescence analyses were conducted to compare the generation of hydroxyl radicals during both processes. In this sono-Fenton-like process, BPA degradation was affected by solution pH, temperature, ultrasound power, CF size, H2O2 dose, and initial BPA concentration. The BPA degradation curves showed an induction period (first stage) and a rapid degradation period (second stage). Process efficiency was totally and partially enhanced in the presence of chloride and carbonate ions, respectively. Chemical scavenger tests showed that both free and surface-bound hydroxyl radicals participate in BPA degradation under the sono-Fenton-like process using CF. The functional groups and copper crystals on the CF surface remained unchanged after five consecutive reuses, and the BPA degradation efficiency of CF was maintained over 80% during the reuse processes as a sono-Fenton-like catalyst.