RESUMO
Case summary: A 12-year-old male neutered Bengal cat presented for a left thoracic limb lameness of several weeks' duration. Abnormal advanced imaging findings depicted the presence of an irregularly marginated osteolytic lesion in the proximal-mid diaphysis of the left humerus. A histopathological evaluation of the humerus confirmed a diagnosis of osteoblastic osteosarcoma. Limb-sparing surgery was planned with a custom-designed three-dimensional printed endoprosthesis. Mild neuropraxia was noted immediately postoperatively and deemed to have resolved by the 2-week follow-up. Stereotactic radiation was planned, though pulmonary metastasis was noted on planning CT. The cat was euthanased 90 days postoperatively owing to the development of pulmonary clinical signs. Relevance and novel information: This is the first reported case of a humeral limb salvage procedure in a cat using a custom-designed three-dimensional printed endoprosthesis. Although the survival time in this case was short, the patient maintained an adequate quality of life and limb function was preserved.
RESUMO
Three-dimensional printing is a rapidly growing field, with extensive application to orthopaedics and spinal surgery. Three-dimensional-printed (3DP) patient-specific implants (PSIs) offer multiple potential benefits over generic alternatives, with their use increasingly being described in the spinal literature. This report details a unique, emergency case of a traumatic spinal injury in a 31-year-old male, acquired rurally and treated with a 3DP PSI in a tertiary unit. With increasing design automation and process improvements, rapid, on-demand virtual surgical planning (VSP) and 3DP PSIs may present the future of orthopaedics and trauma care, enabling faster, safer, and more cost-effective patient-specific procedures.
RESUMO
Context: Anterior lumbar interbody fusion (ALIF) is a common procedure for patients suffering degenerative, deformity, or posttraumatic pathologies of the lumbar spine. Aims: The aim of this study is to evaluate the clinical and radiological outcomes of a combination Titanium/Polyetheretherketone (Ti/PEEK) 3-screw fixation ALIF cage. Settings and Design: This was a prospective multisurgeon series of 87 patients (105 implants), with a minimum 24-month follow-up. Twelve patients (12/87) were supplemented with posterior percutaneous pedicle screw fixation for additional stability for pars defect spondylolisthesis correction. Radiological follow-up with fine-cut computed tomography (CT) scan occurred at 4-6 months, and again at 18-24 months if no fusion observed on initial CT, was performed to evaluate early and final fusion rates, and integration of the Ti/PEEK cage at the end-plate junction. Clinical follow-up included the subjective measures of pain and functional status and objective wearable device monitoring. Results: The fusion rate was 85% (97/105 implants) 6 months postoperatively, with no implant-related complications, and 95% at 24 months, based on independent radiological assessment. Patients experienced statistically significant improvement in subjective pain and functional outcomes compared to preoperative status. The objective measures revealed a daily step count with a 27% improvement, and gait velocity with a mean increase from 0.97 m/s to 1.18 m/s, at 3 months postoperatively. Conclusions: A Ti/PEEK cage, with allograft and bone morphogenetic protein-2 (BMP-2), achieved rapid interbody progression to fusion and is an effective implant for use in anterior lumbar surgery with high early fusion rates and no peri-endplate lucency. Supercritical CO2 allograft provided an osteoconductive scaffold and combined well with BMP-2 to facilitate fusion.
RESUMO
With the advent of three-dimensional printing, rapid growth in the field and application in spinal and orthopedic surgery has been seen. This technology is now being applied in creating patient-specific implants, as it offers benefits over the generic alternative, with growing literature supporting this. This report details a unique application of virtual surgical planning and manufacture of a personalized implant in a case of cervical disc replacement failure with severe osteolysis and resultant hypermobility. Where this degree of degenerative bone loss would often necessitate a vertebrectomy to be performed, this case highlights the considerable customizability of 3D-printed patient-specific implants to contour to the bony defects, allowing for a smaller and safer operation, with the achievement of stability as early as 3 months after the procedure, by the presence of osseointegration. With increasing developments in virtual planning technology and 3D printing ability, the future of complex spinal revision surgery may adopt these technologies as it affords the patient a faster, safer, and less invasive and destructive procedure.
RESUMO
Neanderthal foot bone proportions and morphology are mostly indistinguishable from those of Homo sapiens, with the exception of several distinct Neanderthal features in the talus. The biomechanical implications of these distinct talar features remain contentious, fueling debate around the adaptive meaning of this distinctiveness. With the aim of clarifying this controversy, we test phylogenetic and behavioral factors as possible contributors, comparing tali of 10 Neanderthals and 81 H. sapiens (Upper Paleolithic and Holocene hunter-gatherers, agriculturalists, and postindustrial group) along with the Clark Howell talus (Omo, Ethiopia). Variation in external talar structures was assessed through geometric morphometric methods, while bone volume fraction and degree of anisotropy were quantified in a subsample (n = 45). Finally, covariation between point clouds of site-specific trabecular variables and surface landmark coordinates was assessed. Our results show that although Neanderthal talar external and internal morphologies were distinct from those of H. sapiens groups, shape did not significantly covary with either bone volume fraction or degree of anisotropy, suggesting limited covariation between external and internal talar structures. Neanderthal external talar morphology reflects ancestral retentions, along with various adaptations to high levels of mobility correlated to their presumably unshod hunter-gatherer lifestyle. This pairs with their high site-specific trabecular bone volume fraction and anisotropy, suggesting intense and consistently oriented locomotor loading, respectively. Relative to H.sapiens, Neanderthals exhibit differences in the talocrural joint that are potentially attributable to cultural and locomotor behavior dissimilarity, a talonavicular joint that mixes ancestral and functional traits, and a derived subtalar joint that suggests a predisposition for a pronated foot during stance phase. Overall, Neanderthal talar variation is attributable to mobility strategy and phylogenesis, while H. sapiens talar variation results from the same factors plus footwear. Our results suggest that greater Neanderthal body mass and/or higher mechanical stress uniquely led to their habitually pronated foot posture.
Assuntos
Homem de Neandertal , Tálus , Animais , Fósseis , Humanos , Filogenia , Postura , Estresse Mecânico , Tálus/anatomia & histologiaRESUMO
The emergence of 3D-Printing technologies and subsequent medical applications have allowed for the development of Patient-specific implants (PSIs). There have been increasing reports of PSI application to spinal surgery over the last 5 years, including throughout the spine and to a range of pathologies, though largely for complex cases. Through a number of potential benefits, including improvements to the implant-bone interface and surgical workflow, PSIs aim to improve patient and surgical outcomes, as well as potentially provide new avenues for combating challenges routinely faced by spinal surgeons. However, obstacles to widespread acceptance and routine application include the lack of quality long-term data, research challenges and the practicalities of production and navigating the regulatory environment. While recognition of the significant potential of Spinal PSIs is evident in the literature, it is clear a number of key questions must be answered to inform future clinical and research practices. The spinal surgical community must selectively and ethically continue to offer PSIs to patients, simultaneously allowing for the necessary larger, comparative studies to be conducted, as well as continuing to provide optimal patient care, thereby ultimately determining the exact role of this technology and potentially improving outcomes.
RESUMO
BACKGROUND: Esophageal fistulae are rare, though serious, complications of anterior cervical surgery. Hardware-related issues are important etiologic factors. Patient-specific implants (PSIs) have increasingly been adapted to spinal surgery and offer a range of benefits. Zero-profile implants are a recent development primarily aimed at combating postoperative dysphagia. We report the first use of a 3-dimensional (3D)-printed zero-profile PSI in managing implant failure with migration and a secondary esophageal fistula. METHODS: A 68-year-old female had a prior C5-7 corpectomy with cage and plate fixation, as well as posterior C3-T1 lateral mass fixation, complicated by anterior plate displacement, resulting in pseudoarthrosis and an esophageal fistula. A 3D-printed zero-profile PSI was designed and implanted as part of a revision procedure to assist in recovery, prevent recurrence, and facilitate bony fusion. RESULTS: Optimal implant placement was achieved on the basis of preoperative virtual surgical planning. By 1 month postoperatively the patient had significantly improved, with evidence of esophageal fistula resolution and radiographic evidence of optimal implant placement. CONCLUSIONS: Zero-profile 3D-printed PSIs may combat common and serious complications of anterior cervical surgery including postoperative dysphagia and esophageal fistulae. Further research is required to validate their widespread use for either cervical corpectomy or diskectomy and interbody fusion.
Assuntos
Fístula Esofágica/etiologia , Fístula Esofágica/cirurgia , Complicações Pós-Operatórias/cirurgia , Impressão Tridimensional , Próteses e Implantes , Reoperação/métodos , Fusão Vertebral/métodos , Idoso , Vértebras Cervicais/cirurgia , Discotomia , Feminino , Humanos , Planejamento de Assistência ao Paciente , Pseudoartrose/cirurgia , Resultado do TratamentoRESUMO
OBJECTIVES: - We aimed to investigate how pre-bending affects the mechanical properties, specifically fatigue, of stainless-steel plates. METHODS: - 3.5mm LCP 10-hole plates were pre-bent in 1, 2 and 3 locations to the same overall degree and fatigue testing performed. Finite Element Analysis (FEA) was performed in Strand7 (version 2.4.6) to better understand the failure point of the plates in four-point bending. RESULTS: - Six different plate pre-bending conditions were tested for resistance to fatigue failure. Increasing the number of pre-bends improved the fatigue resistance with two pre-bends having a mean 509,304 cycles to failure and three pre-bends 491,378 cycles to failure. The region of highest stress and the point of fatigue failure were at the plate's minimum cross-sectional area, which was predicted by the FEA and confirmed with mechanical testing. For plates pre-bent in two locations, the fatigue failure always occurred in the screw hole not in between the positions of the two pre-bends. Non-linear FEA simulation confirmed that work hardening occurs around pre-bend locations, conferring increased fatigue resistance to the holes next to, or between, pre-bend locations. CONCLUSIONS: We found that contrary to orthopaedic folklore, pre-bending of plates is not detrimental to fatigue resistance of the stainless-steel plates we tested. Pre-bending plates in a single plane increased the fatigue properties of the 10-hole stainless-steel plate tested.
Assuntos
Fixação Interna de Fraturas , Ortopedia , Placas Ósseas , Humanos , Teste de Materiais , Estresse MecânicoRESUMO
Purpose: Spiral metacarpal fractures fixed with 2 non-lagged, interfragmentary cortical screws were tested to failure. The effect of screw size (1.2 mm, 1.5 mm, 2.0 mm, and 2.3 mm) on construct strength was tested in 3-point bending. Methods: Three-dimensional-printed metacarpal test models were reproduced from computed tomography scans to reduce the confounding variables of bone density and anatomy, often encountered when using cadavers. Results: No significant difference was found between the screw sizes, and the peak failure force was similar. Drill bit fracture and deformation during the insertion of the smallest screw (1.2 mm) as well as model failure during the insertion of the largest screw (2.3 mm) were found in some cases. Conclusions: Screws of 1.5 mm and 2.0 mm in diameter were of sufficient strength and did not have the issues encountered with smaller or larger screws. Concerns from previous authors regarding intraoperative fracture were consistent with the pre-testing failure of some 2.3-mm models. Clinical Relevance: Screws of 1.5 mm or 2 mm appear adequate for the fixation of spiral fracture patterns in metacarpal shafts using bicortical non-lagged technique with a low risk of fixation complications.
RESUMO
Patellofemoral anatomical dysplasia is associated with patellofemoral instability and pain. The closure of the knee physis occurs at the same age as the peak incidence of patellofemoral dislocation. This study determined the effect on the patellofemoral anatomical development in a rabbit epiphysiodesis model. Twenty-four skeletally immature New Zealand White rabbits were divided into three groups (a) distal femur epiphysiodesis (FE) (b) proximal tibia epiphysiodesis (TE) (c) control; no epiphysiodesis (C) performed at 6 weeks of age. The primary endpoint was shape analysis using three-dimensional reconstructions of micro-computed tomographys (CTs) performed at 30 weeks of age. The limb length ratios (femur:tibia) were significantly different for both FE (mean 0.72, SD 0.0381, P < .001) and TE (mean 0.91, SD 0.0383, P < .001) treatment groups compared to control (mean 0.81, SD 0.0073). Patella height, as measured from the most distal point of the patella to the tibial joint surface (modified Caton-Deschamps measurement), was lower (baja) in the FE and higher (alta) for the TE, compared with the control group. Our findings suggest femoral and tibial shortening can influence the development of the patellofemoral joint, which may be dictated by moment arm function and is potentially responsible for the etiology of patella alta. Future studies are warranted to explore this association further with the view for the development of treatment options for patella alta in human patients.
Assuntos
Lâmina de Crescimento/cirurgia , Articulação Patelofemoral/crescimento & desenvolvimento , Animais , Fêmur/cirurgia , Modelos Animais , Coelhos , Tíbia/cirurgiaRESUMO
OBJECTIVE: Lower back pain associated with degenerative disc disease (DDD) is a leading cause of disability worldwide. Anterior lumbar interbody fusion (ALIF) has been shown to be effective for treating refractory DDD, but it remains unclear which patients may benefit most from the procedure. This study aims to develop a predictive model for clinical success in L5/S1 ALIF for DDD. METHODS: A retrospective cohort study of 68 patients with refractory DDD who underwent L5/S1 ALIF was performed. Clinical success was defined as an improvement in Oswestry Disability Index (ODI) of 20 points postoperatively. Exploratory analyses were performed on 16 preoperative clinical and radiographic parameters, followed by a multivariate logistic regression. Evaluation of the predictive model was performed. RESULTS: After exploratory analyses, 4 parameters were suitable for inclusion in the multivariate model. Workers' compensation status (odds ratio [OR], 0.02; 95% confidence interval [CI], 0.001-0.262; P = 0.004) and preoperative ODI (OR, 1.13; 95% CI, 1.05-1.23; P = 0.002) were statistically significant parameters. Furthermore, posterior disc height and disc depth contributed significantly to the model variance (OR, 0.69, 95% CI, 0.44-1.09 and OR, 0.97, 95% CI, 0.81-1.15, respectively). The model had a sensitivity of 81.5%, specificity of 83.3%, C-statistic of 0.921, and a calibration plot similar to the 45° reference line. CONCLUSIONS: This analysis confirms workers' compensation and low preoperative ODI as risk factors for successful L5/S1 ALIF performed for DDD. It also identifies novel prognostic factors, namely posterior disc height and disc depth. This model can aid in patient counseling and selection in the management of L5/S1 DDD.
Assuntos
Pessoas com Deficiência , Degeneração do Disco Intervertebral/cirurgia , Vértebras Lombares/cirurgia , Sacro/cirurgia , Fusão Vertebral/métodos , Adulto , Idoso , Estudos de Coortes , Feminino , Humanos , Degeneração do Disco Intervertebral/diagnóstico por imagem , Vértebras Lombares/diagnóstico por imagem , Masculino , Pessoa de Meia-Idade , Análise Multivariada , Valor Preditivo dos Testes , Estudos Retrospectivos , Sacro/diagnóstico por imagem , Fusão Vertebral/tendências , Resultado do TratamentoRESUMO
OBJECTIVE: Cats rely on their forelimb mobility for everyday activities including climbing and grooming. Supination and pronation of the forelimb in cats are considered to primarily involve the antebrachium, rather than the carpus. Therefore, our null hypothesis was that there would be no movement of the carpal bones (radial carpal bone, ulnar carpal bone and accessory carpal bone) relative to the ulna during supination and pronation. STUDY DESIGN: Eight feline cadaveric forelimbs were rotated from supination to pronation in a jig and computed tomography was performed in the neutral, supinated and pronated positions. The individual carpal bones were segmented from computed tomography images of the supinated and pronated scans in each of the eight specimens. A feline ulna coordinate system was established and used to quantify the translations and rotations between bones of the proximal carpal row and antebrachium. RESULTS: After the carpus was rotated from the initial supinated position into pronation, there was significant translation (x, y and z axes) and rotation (x and y axes) of the proximal row of carpal bones based on absolute magnitude values. Given the differences in translations and rotations of the proximal row of carpal bones, our null hypothesis was rejected. CONCLUSION: The proximal row of carpal bones translate and rotate independently from the ulna in the cat during pronation of the antebrachium. This may have future implications in the diagnosis and management of feline carpal injuries involving the antebrachiocarpal joint.
Assuntos
Carpo Animal/fisiologia , Gatos/fisiologia , Animais , Fenômenos Biomecânicos , Ossos do Carpo/diagnóstico por imagem , Ossos do Carpo/fisiologia , Carpo Animal/diagnóstico por imagem , Pronação/fisiologia , Rádio (Anatomia)/fisiologia , Rotação , Supinação/fisiologia , Tomografia Computadorizada por Raios X , Ulna/fisiologia , Suporte de CargaRESUMO
BACKGROUND: What is the right surface for an implant to achieve biological fixation? Surface technologies can play important roles in encouraging interactions between the implant surface and the host bone to achieve osseointegration. Preclinical animal models provide important insight into in vivo performance related to bone ongrowth and implant fixation. METHODS: A large animal model was used to compare the in vivo response of HA and plasma-sprayed titanium coatings in a well-reported adult ovine model to evaluate bone ongrowth in terms of mechanical properties in cortical sites, and histology and histomorphometry in cortical and cancellous sites at 4 and 12 weeks. RESULTS: Titanium plasma-sprayed surfaces outperformed the HA-coated samples in push-out testing in cortical sites while both surfaces supported new bone ongrowth and remodeling in cortical and cancellous sites. CONCLUSIONS: While both HA and Ti plasma provided an osteoconductive surface for bone ongrowth, the Ti plasma provided a more robust bone-implant interface that ideally would be required for load transfer and implant stability in the longer term.
Assuntos
Fenômenos Biomecânicos/fisiologia , Placas Ósseas , Osso Esponjoso/fisiologia , Osso Esponjoso/cirurgia , Osso Cortical/fisiologia , Osso Cortical/cirurgia , Animais , Osso Esponjoso/citologia , Osso Cortical/citologia , Resistência ao Cisalhamento/fisiologia , Ovinos , TitânioRESUMO
Unfortunately, 3rd author's first name was incorrectly published in the original publication. The complete correct name is given below.
RESUMO
The adoption of bipedalism is a key benchmark in human evolution that has impacted talar morphology. Here, we investigate talar morphological variability in extinct and extant hominins using a 3D geometric morphometric approach. The evolutionary timing and appearance of modern human-like features and their contributions to bipedal locomotion were evaluated on the talus as a whole, each articular facet separately, and multiple combinations of facets. Distinctive suites of features are consistently present in all fossil hominins, despite the presence of substantial interspecific variation, suggesting a potential connection of these suites to bipedal gait. A modern human-like condition evolved in navicular and lateral malleolar facets early in the hominin lineage compared with other facets, which demonstrate more complex morphological variation within Homininae. Interestingly, navicular facet morphology of Australopithecus afarensis is derived in the direction of Homo, whereas more recent hominin species such as Australopithecus africanus and Australopithecus sediba retain more primitive states in this facet. Combining the navicular facet with the trochlea and the posterior calcaneal facet as a functional suite, however, distinguishes Australopithecus from Homo in that the medial longitudinal arch had not fully developed in the former. Our results suggest that a more everted foot and stiffer medial midtarsal region are adaptations that coincide with the emergence of bipedalism, whereas a high medial longitudinal arch emerges later in time, within Homo. This study provides novel insights into the emergence of talar morphological traits linked to bipedalism and its transition from a facultative to an obligate condition.
Assuntos
Evolução Biológica , Hominidae/anatomia & histologia , Hominidae/fisiologia , Locomoção , Tálus/anatomia & histologia , Animais , Feminino , Fósseis/anatomia & histologia , Gorilla gorilla/anatomia & histologia , Gorilla gorilla/fisiologia , Humanos , Masculino , Homem de Neandertal/anatomia & histologia , Homem de Neandertal/fisiologia , Pan troglodytes/anatomia & histologia , Pan troglodytes/fisiologiaRESUMO
BACKGROUND: Patellar tendinopathy is an overuse condition affecting athletes, often with a high morbidity if left untreated. High-level evidence fails to support the use of surgery. A tibial tubercle osteotomy (TTO) has been suggested as a surgical option to improve patient outcomes. Our aim was to explore whether a distalising TTO will alter the patellar tendon to quadriceps tendon force ratio and the sagittal patellar tilt. METHODS: Six cadaver limbs were placed in a custom jig with a mechanical testing machine applying cyclical loads of 200-500 N to the quadriceps tendon. The knee was fixed at 0, 15, 30, 45, 60, 75 and 90° of flexion and a buckle transducer recorded the resultant patellar tendon force. Testing was performed with the native tibial tubercle position and with the tubercle distalised by 11 mm. Testing was also performed with the tubercle anteriorised by 10 mm at both of these tubercle positions, a total of four different testing positions. RESULTS: There was a significant decrease in the patellar tendon to quadriceps tendon force ratio from 30-60° of knee flexion. There was a significant increase in the sagittal patellar tilt at 30° of knee flexion with distalisation. CONCLUSION: This biomechanical study shows that the patellar tendon to quadriceps tendon force ratio can be altered with a distalising tibial tubercle osteotomy. A tibial tubercle osteotomy may be a biomechanical treatment option for recalcitrant patellar tendinopathy by decreasing the load through the patellar tendon, allowing the athlete to maintain higher training volumes and loads.
Assuntos
Osteotomia , Ligamento Patelar/cirurgia , Tendinopatia/cirurgia , Tíbia/cirurgia , Idoso , Idoso de 80 Anos ou mais , Fenômenos Biomecânicos/fisiologia , Cadáver , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Ligamento Patelar/fisiopatologia , Tendinopatia/fisiopatologia , Suporte de Carga/fisiologiaRESUMO
OBJECTIVES: The primate talus is known to have a shape that varies according to differences in locomotion and substrate use. While the modern human talus is morphologically specialized for bipedal walking, relatively little is known on how its morphology varies in relation to cultural and environmental differences across time. Here we compare tali of modern human populations with different subsistence economies and lifestyles to explore how cultural practices and environmental factors influence external talar shape. MATERIALS AND METHODS: The sample consists of digital models of 142 tali from 11 archaeological and post-industrial modern human groups. Talar morphology was investigated through 3D (semi)landmark based geometric morphometric methods. RESULTS: Our results show distinct differences between highly mobile hunter-gatherers and more sedentary groups belonging to a mixed post-agricultural/industrial background. Hunter-gatherers exhibit a more "flexible" talar shape, everted posture, and a more robust and medially oriented talar neck/head, which we interpret as reflecting long-distance walking strictly performed barefoot, or wearing minimalistic footwear, along uneven ground. The talus of the post-industrial population exhibits a "stable" profile, neutral posture, and a less robust and orthogonally oriented talar neck/head, which we interpret as a consequence of sedentary lifestyle and use of stiff footwear. DISCUSSION: We suggest that talar morphological variation is related to the adoption of constraining footwear in post-industrial society, which reduces ankle range of motion. This contrasts with hunter-gatherers, where talar shape shows a more flexible profile, likely resulting from a lack of footwear while traversing uneven terrain. We conclude that modern human tali vary with differences in locomotor and cultural behavior.
Assuntos
Comportamento Alimentar , Atividade Motora , Sapatos , Tálus/anatomia & histologia , Adulto , África , Idoso , Arqueologia , Europa (Continente) , Feminino , História do Século XVII , História do Século XVIII , História do Século XIX , História do Século XX , Humanos , Masculino , Pessoa de Meia-Idade , América do Norte , Sapatos/história , Adulto JovemRESUMO
BACKGROUND: With this case report, we aim to add to the clinical literature on the use of three-dimensional printed patient-specific implants in spinal surgery, show the current state of the art in patient-specific implant device design, present thorough clinical and radiographic outcomes, and discuss the suitability of titanium alloy as an implant material for patients with cancer. CASE DESCRIPTION: A 45-year-old man presented with neck and left arm pain combined with shoulder weakness. Imaging revealed significant destruction of the C3-C5 vertebrae, and chordoma diagnosis was confirmed by biopsy. Gross total tumor resection including multilevel corpectomy was performed in combination with reconstruction using a three-dimensional printed titanium custom implant. Custom-designed features aimed to reduce reconstruction time and result in good clinical and radiographic outcomes. Clinical scores improved postoperatively and remained improved at 17-month postoperative follow-up: visual analog scale score 10/10 preoperatively improved to 2-6/10 at 17 months; Neck Disability Index 46% preoperatively improved to 32% at 17 months. Neither dysphagia nor dysphonia remained after surgical soft tissue swelling subsided. The patient was successfully treated with proton beam therapy after surgery, with no tumor recurrence at 17-month follow-up. Radiographic assessment showed incomplete fusion at 3 months, with clinically insignificant implant subsidence (2.7 mm) and no implant migration or failure at 14 months. CONCLUSIONS: Computer-aided preoperative planning with three-dimensional printed biomodels and custom implant resulted in relatively quick and simple reconstruction after tumor resection, with good clinical and radiographic outcomes at 17 and 14 months, respectively. For patients with primary tumors who may require follow-up radiotherapy or postoperative magnetic resonance imaging, metals used in the devices cause significant imaging artifact.
Assuntos
Vértebras Cervicais/cirurgia , Cordoma/terapia , Medicina de Precisão , Impressão Tridimensional , Próteses e Implantes , Neoplasias da Coluna Vertebral/terapia , Vértebras Cervicais/diagnóstico por imagem , Cordoma/diagnóstico por imagem , Desenho Assistido por Computador , Humanos , Masculino , Pessoa de Meia-Idade , Terapia com Prótons , Procedimentos de Cirurgia Plástica , Neoplasias da Coluna Vertebral/diagnóstico por imagem , TitânioRESUMO
BACKGROUND: Information on the three-dimensional (3D) shape of vertebral end plates is lacking. Previous studies have analyzed two-dimensional shape; however, 3D data are important because they may help improve our understanding of how differences in shape are related to age, gender, race, size, and other parameters, which may subsequently help improve device design for interbody prosthesis. OBJECTIVE: To study the 3D shape of lumbar vertebral end plates from normal adult lumbar spines and correlate them with age, gender, spinal/end plate level, end plate surface area, concave depth, and size. METHODS: An in vivo analysis was undertaken of lumbar vertebral end plate 3D shape. A total of 136 patients' computed tomography scans were used to create 3D models of the lumbar spine for each patient, which were subsequently analyzed. RESULTS: The shape of the superior end plates is different compared with inferior end plates. Across the lumbar spine (L1-S1), the shape of inferior end plates is similar; however, the shape of the superior end plate varies between spinal levels significantly. There was no clear relationship between age and principal component (PC) shapes but there was a strong correlation between end plate concave depth and end plate PC shape scores. CONCLUSIONS: Future interbody (disc replacement and fusion) device designs could use the findings that inferior end plate shape is similar throughout the length of the lumbar spine, whereas superior end plate shape changes. Further, future implants could be level-specific because the present study shows that end plate shape varies through the length of the lumbar spine.
Assuntos
Desenho de Equipamento , Disco Intervertebral/cirurgia , Vértebras Lombares/cirurgia , Região Lombossacral/cirurgia , Adulto , Fenômenos Biomecânicos/fisiologia , Placas Ósseas , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Tomografia Computadorizada por Raios X/métodosRESUMO
PURPOSE: Patellar height measurements on lateral radiographs are dependent on knee flexion which makes standardisation of measurements difficult. This study described a plain radiographic measurement of patellar sagittal height which reflects patellofemoral joint kinematics and can be used at all degrees of flexion. METHODS: The study had two parts. Part one involved 44 normal subjects to define equations for expected patellar position based on the knee flexion angles for three new patellar height measurements. A mixed model regression with random effect for individual was used to define linear and polynomial equations for expected patellar position relating to three novel measurements of patella height: (1) patellar progression angle (trochlea), (2) patellar progression angle (condyle) and (3) sagittal patellar flexion. Part two was retrospective and involved applying these measurements to a surgical cohort to identify differences between expected and measured patellar position pre- and post-operatively. RESULTS: All three measurements provided insight into patellofemoral kinematics. Sagittal patellar flexion was the most useful with the least residual error, was the most reliable, and demonstrated the greatest detection clinically. CONCLUSIONS: Clinically applied radiographic measurements have been described for patellar height which reflect the sagittal motion of the patella and can be used regardless of the degree of flexion in which the radiograph was taken. The expected sagittal patellar flexion linear equation should be used to calculate expected patellar height. LEVEL OF EVIDENCE: IV.