Soil calcium and pH monitoring sensor system.

An agrarian sensorial system based on temperature, moisture, and all solid-state ion-selective potentiometric sensors was developed with the objective of monitoring the behavior of H+ and Ca2+ ions in soil and in real conditions, contributing with a new tool that tries to complement the current precision agriculture technology. The evaluation of the sensorial system to pH monitoring presented a good correlation between the results obtained by the system and the standard methodology, allowing us to notice the soil buffer capacity at different soil depths. With regard to calcium, the sensor system also presented an agreement between its results and those obtained by flame atomic absorption spectrometry, using a calibration model based on multiple linear regressions that allows the correct determination of Ca2+ concentrations in soil depths where the relative moisture is different. In this way, using well-known potentiometric sensors in a complex, discontinued, and heterogeneous matrix, such as soil, the sensorial system proved to be a useful task for agrochemical field applications.

In-soil potassium sensor system.

A potentiometric sensor system based on potassium ion-selective electrodes was developed for agricultural purposes. Sensors were built using PVC ion-selective membranes over an inner solid contact prepared with graphite-epoxy composites. A copper plate was used as a reference electrode. A two-stage electronic circuit composed of current and voltage amplifiers was designed to interface the sensors to a distributed data acquisition system. Three ion-selective sensors and three off-the-shelf temperature sensors and their associated circuits were mounted in a PVC tube to set up a soil probe. The electronic controls were placed in an airtight box fixed at the upper part of the probe. The system was evaluated in the field, where the sensors presented sensibility within the range of 69-71 mV dec(-)(1). Extracts of soil samples were analyzed by a current flame photometry approach, and the results, compared with the probe measurements, showed a linear relationship (r (2) = 0.992 and 0.995, respectively, to 5 and 20 cm depths), which implies viability and instrumentation reliability for agricultural applications.