Diatomites from the Iberian Peninsula as Pozzolans.

The object of this work is to study and characterize diatomites from the southeast of the Iberian Peninsula to establish their character and quality as natural pozzolans. This research carried out a morphological and chemical characterization study of the samples using SEM and XRF. Subsequently, the physical properties of the samples were determined, including thermic treatment, Blaine particle finesse, real density and apparent density, porosity, volume stability, and the initial and final setting times. Finally, a detailed study was conducted to establish the technical properties of the samples through chemical analysis of technological quality, chemical analysis of pozzolanicity, mechanical compressive strength tests at 7, 28, and 90 days, and a non-destructive ultrasonic pulse test. The results using SEM and XRF show that the samples are composed entirely of colonies of diatoms whose bodies are formed by silica between 83.8 and 89.99% and CaO between 5.2 and 5.8%. Likewise, this indicates a remarkable reactivity of the SiO2 present in both natural diatomite (~99.4%) and calcined diatomite (~99.2%), respectively. Sulfates and chlorides are absent, while the insoluble residue portion for natural diatomite is 1.54% and 1.92% for calcined diatomite, values comparatively lower than the standardized 3%. On the other hand, the results of the chemical analysis of pozzolanicity show that the samples studied behave efficiently as natural pozzolans, both in a natural and calcined state. The mechanical tests establish that the mechanical strength of the mixed Portland cement and natural diatomite specimens (52.5 MPa) with 10% PC substitution exceeds the reference specimen (51.9 MPa) after 28 days of curing. In the case of the specimens made with Portland cement and calcined diatomite (10%), the compressive strength values increase even more and exceed the reference specimen at both 28 days (54 MPa) and 90 days (64.5 MPa) of curing. The results obtained in this research confirm that the diatomites studied are pozzolanic, which is of vital importance because they could be used to improve cements, mortars, and concrete, which translates to a positive advantage in the care of the environment.

Ignimbrites Related to Neogene Volcanism in the Southeast of the Iberian Peninsula: An Experimental Study to Establish Their Pozzolanic Character.

The speed at which climate change is happening is leading to a demand for new pozzolanic materials that improve the quality of cements and, at the same time, limit the emission of greenhouse gases into the atmosphere. The main objective of this work is the detailed characterization of an ignimbrite sample (IGNS) to demonstrate its effectiveness as a natural pozzolan. To meet this objective, a series of tests were carried out. In the first stage, mineral and chemical analyses were performed, such as petrographic analysis by thin section (TSP), X-ray diffraction (XRD), oriented aggregate (OA), scanning electron microscopy (SEM) and X-ray fluorescence (XRF). In the second stage, the following technical tests were carried out: chemical quality analysis (QCA), pozzolanicity test (PT) and mechanical compressive strength (MS) at 7, 28 and 90 days, using mortar specimens with ignimbrite/cement formulation (IGNS/PC): 10, 25 and 40% to establish the pozzolanic nature of the ignimbrite. The results of the mineral and chemical analyses showed that the sample has a complex mineralogical constitution, consisting of biotite mica, potassium feldspar, plagioclase, smectite (montmorillonite), quartz, volcanic glass, iron, titanium and manganese oxides, chlorite and chlorapatite. On the other hand, the technological tests revealed the pozzolanic nature of the sample, as well as visible increases in the mechanical compressive strengths in the three proportions, the most effective being IGNS/PC:10% and IGNS/PC:25% at 7, 28 and 90 days of setting. The results obtained could be applied in the formulation of new pozzolanic cements with ignimbrite as a natural pozzolanic aggregate.

Teorías y modelos sobre los estilos de aprendizaje / Theories and models on learning styles

Introducción: diagnosticar la forma en que los alumnos aprenden, resulta necesario para el éxito del proceso formativo, pero las teorías y modelos relacionados con los estilos de aprendizaje resultan muy variados y se dificulta su aplicación. Objetivo: analizar diferentes teorías y modelos relativos a los estilos de aprendizaje desde una visión holística. Métodos: la búsqueda se desarrolló en español e inglés durante los últimos cuatro meses de 2021, se emplearon las bases de datos: Latindex, Redib, Redalyc, Ebsco, SciELO, Hinari, ISI Web y Scopus. Las palabras clave empleadas fueron: estilos de aprendizaje, modelo, características, metodologías, estrategias. Los criterios de selección se aplicaron a 811 fuentes bibliográficas identificadas inicialmente y fueron seleccionados 26 artículos. Desarrollo: se confrontaron diversos posicionamientos y experiencias desde los años 50 del siglo XX hasta la actualidad. Abordar diferentes enfoques de los estilos de aprendizaje arroja una perspectiva evolutiva de dicho fenómeno. El análisis holístico posibilita visualizar las implicaciones de los estilos de aprendizaje en el proceso enseñanza aprendizaje. Conclusiones: la integración de los modelos de Kolb y Honey y Mumford constituye una opción viable para su aplicación a la realidad educativa y posibilita un diagnóstico confiable para el proceso instructivo.

Introduction: the diagnosis of the way in which students learn is necessary for the success of the training process, but the theories and models related to learning styles are very varied, making their application difficult. Objective: to analyze different theories and models related to learning styles from a holistic view. Methods: The search was carried out in Spanish and English during the last four months of 2021, using the databases: Latindex, Redib, Redalyc, Ebsco, SciELO, Hinari, ISI Web, and Scopus. The keywords used were learning styles, model, characteristics, methodologies, strategies. The selection criteria were applied to 811 initially identified bibliographic sources, leaving 26 selected articles. Development: different positions and experiences were confronted from the 50's of the 20th centuries to the present. The approach of different approaches about learning styles throws an evolutionary perspective of this phenomenon. Holistic analysis makes it possible to visualize the implications of learning styles in the teaching-learning process. Conclusions: the integration of Kolb's models as well as Honey and Mumford constitute a viable option for its application to the educational reality, allowing a reliable diagnosis for the instructional process.

Sustainability of Cocoa (Theobroma cacao) Cultivation in the Mining District of Ponce Enríquez: A Trace Metal Approach.

Historically, cocoa (Theobroma cacao) has been one of Ecuador's most important export crops. In the Ponce Enriquez district, artisanal and small gold mining (ASGM), and quarrying account for 42% of economic activities, while agriculture and livestock farming account for 30%, making the analysis of their synergy and interaction key to understanding the long term viability of the different activities. In this study, we evaluated the concentration of potentially toxic metals in different parts of the cocoa plant and fruit, in relation to mining activities within the area. Gold extraction generates pollution, including potentially toxic metals such as mercury (Hg), cadmium (Cd), arsenic (As), copper (Cu), lead (Pb) and zinc (Zn). In order to understand the mobility of these metals within the cocoa plant and fruit, the analysis was conducted separately for leaves, pod, husk and cocoa bean. Concentrations of the target metals in the different plant parts and soil were measured using ICP-MS, and the mobility and risk factors were calculated using the transfer factor (TF) and the risk ratio (HQ). The results suggest that Zn, Cd and Cu are indeed moving from the soil to cocoa leaves and beans. Furthermore, the results show that the concentrations of toxic metals in the different parts of the cocoa fruit and plant, particularly in the cocoa bean, which is used for chocolate manufacture, are not higher than those regulated by FAO food standards, as is the case of Cd, which is limited to 0.2 mg Cd/kg and in the samples analyzed does not exceed this limit. Even though the concentration of these metals does not exceed the safety standard, the presence of these potentially hazardous metals, and the fact they are absorbed by this important local crop, are worrying for the long-term sustainability of cocoa cultivation in the area. Therefore, it is fundamental to monitor the local environment, understanding the distribution of heavy metal pollution, and work with the local authorities in landscape management to minimize the exposure of crops to ASGM pollution.

Altered Volcanic Tuffs from Los Frailes Caldera. A Study of Their Pozzolanic Properties.

This work presents the results of the study of the physical, chemical, mineralogical and pozzolanic properties of the altered volcanic tuffs (AVT) that lie in the Los Frailes caldera, south of the Iberian Peninsula, and demonstrates their qualities as pozzolans for the manufacturing of mortars and pozzolanic cements of high mechanical strength. The main objective of this research is to show to what extent the AVTs can replace portland cement (PC) in mortars, with standardised proportions of 75:25% and 70:30% (PC-AVT). To achieve these objectives, three AVT samples were studied by a petrographic analysis of thin section (PATS), DRX, FRX and MEB. The pozzolanic properties were determined by three methods: electrical conductivity (ECT), chemical pozzolanicity tests (CPT) at 8 and 15 days and mechanical strength tests (MS) of the specimens at 2, 7, 28 and 90 days. Studies of a PATS, DRX, FRX and MEB showed that the AVT samples' constitutions are complex where smectite (montmorillonite), mordenite, quartz, halloysite, illite, kaolinite, volcanic glass and lithic fragments coexist. The results of the ECT and CPT tests confirmed the pozzolanic properties of the samples analysed and proved an increase in mechanical strength from 2 to 90 days of testing.

Effects of a Natural Mordenite as Pozzolan Material in the Evolution of Mortar Settings.

This paper shows the results of a study focused on the evolution and properties of mortars made with a mixture of portland cement (PC) and natural mordenite (Mor). To begin, samples of mordenite, cement and sand were studied with X-ray diffraction (XRD), X-ray fluorescence (XRF) and granulometric analysis (GA). Next, mortars with a ratio of 75% PC and 25% mordenite were prepared to determine their initial and final setting times, consistency and density. Continuing, the density, weight and compressive strength of the specimens were determined at 2, 7, 28, 90 and 365 days. Finally, the specimens were studied using SEM, XRD and XRF. The results of the study of the mordenite sample showed a complex constitution where the major mineral component is mordenite, and to a lesser degree smectite (montmorillonite), halloysite, illite, mica, quartz, plagioclase and feldspar, in addition to altered volcanic glass. Tests with fresh cement/mordenite mortar (CMM) showed an initial setting time of 320 min and a final setting time of 420 min, much longer than the 212-310 min of portland cement mortar (PCM). It was established that the consistency of the cement/mordenite mortar (CMM) was greater than that of the PCM. The results of the density study showed that the CMM has a lower density than the PCM. On the other hand, the density of cement/mordenite specimens (CMS) was lower than that of portland cement specimens (PCS). The CMS compressive strength studies showed a significant increase from 18.2 MPa, at 2 days, to 72 MPa, at 365 days, with better strength than PCS at 28 and 365 days, respectively. XRD, XRF and SEM studies conducted on CMS showed a good development of primary and secondary tobermorite, the latter formed at the expense of portlandite; also, ettringite developed normally. This work proves that the partial replacement of PC by mordenite does not have a negative effect on the increase in the mechanical strength of CMS. It indicates that the presence of mordenite inhibits the spontaneous hydration of C3A and controls the anomalous formation of ettringite (Ett). All this, together with the mechanical strength reported, indicates that mordenite has a deep and positive influence on the evolution of the mortar setting and is an efficient pozzolan, meaning it can be used in the manufacture of mortars and highly resistant pozzolanic cement, with low hydration heat, low density, stability in extremely aggressive places and a low impact on the environment.

Artisanal and Small Gold Mining and Petroleum Production as Potential Sources of Heavy Metal Contamination in Ecuador: A Call to Action.

Mining and petroleum production are the source of many elements and base materials fundamental for our modern way of life. The flip side of these keystone industries is the environmental degradation they can cause if not properly managed. Metallic mining and petroleum production can contaminate the local ecosystem with sediments, chemicals used in the industrial processes and heavy metals, part of the metallic ore or oil reservoir. The objective of this project was to analyze the spatial distribution of the presence of different potentially hazardous elements that make up the metallic deposits and oil reservoirs in Ecuador, focused mainly on artisanal and small-scale gold mining (ASGM) districts. Additionally, we were interested in analyzing this information under the local political and administrative contexts which are key to determining how likely it is that mismanagement of the local mineral deposits and petroleum exploitation projects will end up causing environmental degradation. An extensive and intensive literature search was conducted for information on the presence and concentration of 19 potentially harmful elements. We analyzed data on 11 metallic deposits throughout Ecuador and a major oilfield in the Ecuadorian Amazon basin. We used geographic information systems to analyze the spatial distribution of these reservoirs and their mineral compositions. The results indicated a widespread distribution and high concentration of elements potentially harmful for human health, such as mercury, cadmium and arsenic, throughout the metallic deposits in Ecuador. This is particularly true for long-exploited ASGM districts, such as Ponce-Enríquez, Portovelo-Zaruma and Nambija. This study highlights the importance of understanding geological diversity and its potential risks to better protect the biological diversity and public health of its inhabitants. Furthermore, we consider our work not as a call to stop ASGM mining nor petroleum production, but on the contrary as a strong call to plan every mining and petroleum production project considering these risks. Moreover, our work is a call to action by the local government and authorities to stop corruption and fulfill their duties overseeing the activities of mining and petroleum companies, stopping illegal mining, helping ASGM communities to improve their environmental standards, finding alternative income sources and protecting the local environment.

Skin delivery of antioxidant surfactants based on gallic acid and hydroxytyrosol.

OBJECTIVES: The aim of this study has been to investigate the dermal absorption profile of the antioxidant compounds gallic acid and hydroxytyrosol as well as their derivatives, hexanoate (hexyl gallate and hydroxytyrosol hexanoate) and octanoate (octyl gallate and octanoate derivative) alkyl esters (antioxidant surfactants). Previously, the scavenging capacity of these compounds, expressed as efficient dose ED50, has also determined. METHODS: The percutaneous absorption of these compounds was obtained by an in vitro methodology using porcine skin biopsies on Franz static diffusion cells. The antiradical activity of compounds was determined using the 1,1-diphenyl-2-picrylhydrazyl free radical method. KEY FINDINGS: The percutaneous penetration results show the presence of antioxidants in all layers of the skin. The content of the cutaneously absorbed compound is higher for the antioxidant surfactants (ester derivatives). This particular behaviour could be due to the higher hydrophobicity of these compounds and the presence of surface activity in the antioxidant surfactants. CONCLUSIONS: These new antioxidant surfactants display optimum properties, which may be useful in the preparation of emulsified systems in cosmetic and pharmaceutical formulations because of their suitable surface activity and because they can protect the skin from oxidative damage.

Antioxidative effects and percutaneous absorption of five polyphenols.

A new strategy was designed to evaluate the antioxidant effectiveness of five topically applied polyphenols following skin penetration profiles. The antioxidants were the following polyphenol derivatives: epicatechin, resveratrol, rutin, quercetin, and trolox, which was used as the reference antioxidant. The hydrophilic/lipophilic character of these compounds was evaluated, and their antioxidant activity was measured by the DPPH method. The percutaneous absorption of these polyphenols was obtained by an in vitro methodology using porcine skin biopsies. This methodology involves the quantification of the antioxidants present in each specific skin layer to evaluate antioxidant effectiveness. The antioxidant activity in each skin layer was also determined by the DPPH method. The results indicated that lipophilic antioxidants (epicatechin, resveratrol, quercetin, and trolox) penetrated deeper into the skin layers, whereas a more hydrophilic compound, rutin, remained on the skin surface. The antioxidant evaluation of each skin compartment suggested that resveratrol and rutin were the most effective topically applied compounds in view of their antioxidant activity and their skin penetration profile.

Textiles with gallic acid microspheres: in vitro release characteristics.

Abstract The aim of this study was to demonstrate the skin penetration of an antioxidant, gallic acid (GA), encapsulated in poly-ε-caprolactone (PCL) microspheres and applied onto textile fabrics, by a specific in vitro percutaneous absorption methodology. Two techniques (particle size distribution and FTIR) were used to characterise the microspheres obtained. The amount of GA-loaded microspheres present in the biofunctional textiles was established before their use as a textile drug delivery system. More absorption and desorption of microspheres with GA for the polyamide fabric were found in comparison with cotton fabric. The percutaneous absorption results indicated that the skin penetration of GA released from PCL-microspheres that were applied directly to the skin was higher than when GA was embedded within biofunctional textiles, in conclusion, an interesting reservoir effect may be promoted when biofunctional textiles were used.

Health evaluation of Galapagos Hawks (Buteo galapagoensis) on Santiago Island, Galapagos.

Galapagos Hawks (Buteo galapagoensis), the only endemic, diurnal raptor species in Galapagos, are currently distributed on eight Galapagos Islands having been extirpated from three of the human-inhabited islands. In January 2009, we performed health assessments of 89 Galapagos Hawks on Santiago Island, Galapagos. Four of the 89 Galapagos Hawks (4%) evaluated had physical abnormalities. Blood parameters did not differ between males and females, except for aspartate transaminase values, which were significantly higher in females than males. No Galapagos Hawks tested positive for antibodies to avian encephalitis virus, Marek virus, and paramyxovirus-1 or to haemosporidian antigen. Chlamydophila psittaci antigen was detected in 2 of 86 Galapagos Hawks (2%), with 24 of 43 Galapagos Hawks (56%) antibody-positive for avian adenovirus-1 and 1 of 48 Galapagos Hawks (2%) antibody positive for Toxoplasma gondii. There were no significant differences in infectious disease results based on sex. This study contributes to the understanding of the health status of the Galapagos Hawk and to the establishment of baseline information for the species.

Photodamage determination of human hair.

Sunlight on human hair causes photo-degradation. This results in bleaching due to melanin oxidation through free radicals, and induces keratin impairment. Protein degradation, tryptophan degradation, lipidic peroxidation and electron paramagnetic resonance can be used to evaluate proteic and lipidic photodecomposition and free radical formation in hair fibres subjected to antioxidant action and different UV intensities. All these methodologies have been optimised to determine protein, lipid and melanin degradation in hair subjected to different UV intensities.

Hydroxylation of the diterpenes ent-kaur-16-en-19-oic and ent-beyer-15-en-19-oic acids by the fungus Aspergillus niger.

The diterpenes ent-kaur-16-en-19-oic acid (1) and ent-beyer-15-en-19-oic acid (2) are the major constituents of a spasmolytic diterpenic mixture obtained from the roots of Viguiera hypargyrea, a Mexican medicinal plant. Microbial transformation of 1 and 2 was performed with Aspergillus niger. Two metabolites, ent-7alpha,11beta-dihydroxy-kaur-16-en-19-oic acid (4) and ent-1beta,7alpha-dihydroxy-kaur-16-en-19-oic acid (5), were isolated from the incubation of 1, and one metabolite, ent-1beta,7alpha-dihydroxy-beyer-15-en-19-oic acid (6), was isolated in high yield (40%) from 2. The structures were elucidated on the basis of spectroscopic analyses and confirmed by X-ray crystallographic studies. Compounds 1-4 and 6 and methyl ester derivatives 4a and 6a were evaluated for their ability to inhibit the electrically induced contraction of guinea-pig ileum. Compounds 1, 3, 4, 4a and 5 were significantly active. These results showed that dihydroxylation of 1 at 7beta, 11alpha-, and 1alpha, 7beta-positions resulted in a loss of potency.

An ex vivo methodology to assess the lipid peroxidation in stratum corneum.

Environmental risks, particularly UV radiation, provide a challenge to the function of the skin barrier. Protective measures such as the use of antioxidant products represent a possible method of providing protection to the skin. This paper reports the development of a non-invasive ex vivo method using tape strips of the outermost layers of stratum corneum (SC) from human volunteers in order to determine the effectiveness of an antioxidant emulsion topically applied to prevent lipid peroxidation (LPO) in the horny layer after an UV irradiation exposure. Two different formulations were used: formulation (A), containing Vitamin A, E and C, and formulation (B) containing fish extract. Both formulations were topically applied in vivo on volunteer forearms; then, a tape stripping of the SC of each volunteer was carried out. The lipid peroxidation was measured ex vivo after an UV irradiation of the SC samples. The amount of SC stripped to evaluate differences in lipid peroxidation, the UV irradiation intensity to form lipid peroxides and the accuracy of lipid peroxide analysis were optimized in this methodology using formulation (A). After an exposure application of seven days, a group of three strips of the outermost layers of SC of volunteers was irradiated with an intensity of 182.7 J/cm(2) to quantify the LPO inhibition. The percentage of LPO inhibition obtained after topical application of both formulations was in the range of 40-58% demonstrating the effectiveness of the formulations topically applied against lipid peroxidation on human SC. This methodology may be used as a quality control tool to determine ex vivo the percentage of the LPO inhibition on human SC for a variety of antioxidants topically applied.

Application of internal wool lipids to hair.

PURPOSE: Hair lipids can contribute to physicochemical phenomena such as diffusion, cell cohesion and mechanical strength, although lipids occur at much lower levels (1-6% dry weight) than proteins (>90%).Hair lipids can be diminished by hair washing and submission to chemical treatments. Studies have shown that internal wool lipids (IWL) resemble those membranes of other keratinic tissues such as human hair or stratum corneum. RESULTS: In this work, the IWL, in the form of liposomes or from an emulsion system, were applied to untreated hair fibres and also treated hair fibres. The results showed that application of IWL to pretreated hair samples lead to an improvement in mechanical strength properties of the fibres when the IWL were applied structured as liposomes. Differential scanning calorimetry studies demonstrated that the application of IWL to pretreated hair sample led to a slight increase in the crystalline material of the fibres. Moreover, scanning electron microscopy studies showed that application of IWL liposomes to damaged hair fibres lead to an improvement of the cuticle scale, demonstrating the importance of the use of a delivery vehicle with a bilayer structure similar to the one present in the hair fibre to restore the natural properties of the fibre.

Influence of water in the lamellar rearrangement of internal wool lipids.

Small angle X-ray scattering (SAXS) was applied to a new lipid model arrangement, which was achieved by concentrating or diluting internal wool lipid liposome suspensions in varying water concentrations. The influence of the water content in the lamellar structure of the internal wool lipids is compared with the lamellar structure of phosphatidylcholine bilayers present in the membranes of the living cells. The high increase in the lamellar distances with the water content indicates that large amounts of water can be retained in the lipid wool membrane in contrast to the case of phosphatidylcholine liposomes. A transition temperature between 40 and 50 degrees C tends to eliminate the ordered lamellar structure when more than 60% of water is present in the bilayer structure. This could account for the increase in the permeability of the wool fibres when these are soaked in water at temperatures exceeding 40 degrees C.

Thermotropic behavior of ceramides and their isolation from wool.

The composition of internal wool lipids (IWL) resembles that of lipids present in other keratinic tissues such as human hair or the stratum corneum. Advances in the isolation of ceramides from wool and in the characterization of their thermotropic properties could facilitate their application in human skin care treatments. IWL are solvents extracted from wool fibers. Ceramide isolation is carried out by medium-pressure liquid chromatography. The different fractions obtained were analyzed quantitatively by thin layer chromatography coupled to an automated flame ionization detector and by high-performance thin layer chromatography using a densitometric detector. Two important fractions were isolated: one was a mixture of different ceramides and the other was exclusively made of ceramide 2 (nonhydroxy acid sphingosine [NS]). The thermotropic behavior of IWL and their isolated fractions were studied by thermogravimetric analysis, differential scanning calorimetry (DSC), and by attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) methodologies. The transition temperature (Tm) obtained was compared with the results of the IWL extract, stratum corneum lipids, and the values found in the bibliography for isolated ceramides. The Tm obtained for IWL (48 degrees C) was lower than that achieved for SCL (65 degrees C). This discrepancy could be due to the different ceramide pattern and to the larger amounts of free fatty acids present in the IWL extract. Although the isolated ceramides had higher Tm values, they resembled the values reported in the bibliography. The suitability of the fraction composed exclusively of ceramide 2 [NS] for skin applications was confirmed by ATR-FTIR and DSC.

X-ray diffraction analysis of internal wool lipids.

Polarised optical microscopy (POM) and X-ray diffraction techniques were applied to intercellular lipids extracted from wool to study their structural arrangement in order to determine their role in the diffusion properties of wool fibre. Intercellular wool lipids (IWL) arranged as concentrated liposomes were shown to be a good intercellular lipid model, allowing their study by X-ray diffraction techniques. The results confirm that intercellular lipids of wool fibre are organised in a lamellar structure of 5.0-8.0 nm width, termed beta-layer, which had been assumed to be lipids arranged as a bilayer. Structurally, internal wool lipids are distributed at least in two domains at low temperatures: an ordered phase made up of ceramides and free fatty acids (FFA) alone, arranged in crystal orthorhombic states separately, and a liquid crystal state when mixed together. At 40 degrees C there is a reversible phase transition produced by the melt of the crystal orthorhombic states, whereas the liquid crystal state remains until 65 degrees C.

Physicochemical aspects of the liposome-wool interaction in wool dyeing.

Despite the promising application of liposomes in wool dyeing, little is known about the mechanism of liposome interactions with the wool fiber and dyestuffs. The kinetics of wool dyeing by two dyes, Acid Green 27 (hydrophobic) and Acid Green 25 (hydrophilic), were compared in three experimental protocols: (1) without liposomes, (2) in the presence of phosphatidylcholine (PC) liposomes, and (3) with wool previously treated with PC liposomes. Physicochemical interactions of liposomes with wool fibers were studied under experimental dyeing conditions with particular interest in the liposome affinity to the fiber surface and changes in the lipid composition of the wool fibers. The results obtained indicate that the presence of liposomes favors the retention of these two dyes in the dyeing bath, this effect being more pronounced in case of the hydrophobic dye. Furthermore, the liposome treatment is accompanied by substantial absorption of PC by wool fibers with simultaneous partial solubilization of their polar lipids (more evident at higher temperatures). This may result in structural modification of the cell membrane complex of wool fibers, which could account for a high level of the dye exhaustion observed at the end of the liposome dyeing process.