Fabrication of ultra-high numerical aperture GeO2-doped fiber and its use for broadband supercontinuum generation: publisher's note.

This publisher's note serves to correct Appl. Opt.56, 9315 (2017)APOPAI0003-693510.1364/AO.56.009315.

Nanosecond pulse laser generation at 1.55 and 2 µm regions by integrating a piece of newly developed chromium-doped fiber-based saturable absorber.

This paper demonstrated the nanosecond pulse laser operation at 1.55 and 2 µm wavelength regions using a newly develop chromium-doped fiber (CrDF) as a saturable absorber (SA) to convert efficiently continuous-wave laser operation to nanosecond pulse laser operation. The laser uses an erbium-doped fiber (EDF) and thulium-doped fiber as the gain medium. A piece of 10 cm long CrDF was integrated into both laser cavities to generate nanosecond pulse laser operation. In 1.55 region generation, an additional single-mode fiber (SMF) 100 m long was added into the EDF laser cavity. Stable pulse generation occurred at a repetition rate of 1 MHz with a pulse width of 432 ns and a signal-to-noise ratio (SNR) of 66 dB. The highest peak power of 24 mW was obtained at 142 mW pump power. In 2 µm region generation, the obtained repetition rate was 10 MHz with a pulse width and SNR of 59 ns and 41 dB, respectively. The highest peak power was only 8.3 mW. By looking into the findings, the newly developed CrDF SA has a potential to be further enhanced toward better generation of ultrashort pulse fiber lasers.

Regenerated grating produced in a multimaterial glass-based photosensitive fiber with an ultrahigh thermal regeneration ratio.

This work demonstrates thermal regeneration of gratings inscribed in a new type of multi-material glass-based photosensitive fiber. And isothermal annealing procedure has been carried out on a type-I seed grating (SG) imprinted in erbium-doped zirconia-yttria-alumina-germanium (Er-ZYAG) silica glass-based fiber, which is initiated from room temperature of 25°C up to 900°C. The findings show that the created regenerated grating (RG) has an ultrahigh thermal regeneration ratio with a value of 0.72.

Fabrication of ultra-high numerical aperture GeO2-doped fiber and its use for broadband supercontinuum generation.

We report the fabrication, characterization, and application (broadband supercontinuum [SC] generation) of ultra-high numerical-aperture heavily (50 mol. %) GeO2-doped optical fiber, obtained through a modified chemical vapor deposition process and rod-in-tube method. The formation of Ge-related diamagnetic defect centers, such as germanium oxygen defect centers (GeODC) with nonbridging lone electron pairs, confirmed by x-ray photoelectron spectroscopy and optical absorption studies, inducing hypolarizable local dipoles, may be responsible in boosting the nonlinear effects and enhancing stimulated Raman scattering at pumping with high-power pulses, culminating in generation of broadband SC generation. The SC spans toward the Stokes side up to 2.4 µm, under the action of ns-range pulses launched from a smartly Q-switched erbium-doped fiber laser with operation wavelength (1.56 µm) matching the zero-dispersion wavelength of the high GeO2-doped fiber.

Thermal regenerated grating operation at temperatures up to 1400°C using new class of multimaterial glass-based photosensitive fiber.

The work demonstrates for the first time a thermal regenerated grating (RG) operating at an ultra-high temperature up to 1400°C. A new class of photosensitive optical fiber based on erbium-doped yttrium stabilized zirconia-calcium-alumina-phospho silica (Er-YZCAPS) glass is fabricated using modified chemical vapor deposition (MCVD) process, followed by solution doping technique and conventional fiber drawing. A type-I seed grating inscribed in this fiber is thermal regenerated based on the conventional thermal annealing technique. The investigation result indicates that the produced RG has an ultrahigh temperature sustainability up to 1400°C. The measured temperature sensitivities are 14.1 and 15.1 pm/°C for the temperature ranges of 25°C-1000°C and 1000°C-1400°C, respectively.

Near-infrared supercontinnum generation in single-mode nonlinear Yb(3+)-doped fiber amplifier.

Near-infrared supercontinnum (SC) generation, accompanied with several emission bands at visible and ultraviolet, is experimentally investigated in an all-fiber single-mode Yb(3+)-doped silica fiber MOPA. The seed is an all-normal-dispersion mode-locked Yb(3+)-doped single-mode fiber laser using a nonlinear polarization evolution mechanism. With the pump power of several hundreds of milliwatts, SC spanning of 1010 nm to 1600 nm was generated in a 20-m single-mode germano-zirconia-silica Yb(3+)-doped fiber amplifier. The intensive nonlinear effects, namely stimulated Raman scattering, four wave mixing, and self-phase modulation, enable the SC generation in the small-core fiber amplifier without the use of photonic crystal fibers or tapered fibers. Such a compact and cost-effective SC generation system enables applications in optical coherent tomography, optical metrology, and nonlinear microscopy.

Gain-shift induced by dopant concentration ratio in a Thulium-Bismuth doped fiber amplifier.

This paper details the effect of Thulium and Bismuth concentration ratio on gain-shift at 1800 nm and 1400 nm band in a Thulium-Bismuth Doped Fiber Amplifier (TBDFA). The effect of Thulium and Bismuth's concentration ratio on gain shifting is experimentally established and subsequently numerically modeled. The analysis is carried out via the cross relaxation and energy transfer processes between the two dopants. The energy transfer in this process was studied through experimental and numerical analysis of three samples with different Tm/Bi concentration ratio of 2, 0.5 and 0.2, respectively. The optimized length for the three samples (TBDFA-1, TBDFA-2 and TBDFA-3) was determined and set at 6.5, 4 and 5.5 m, respectively. In addition, the experimental result of Thulium Doped Fiber Amplifier (TDFA) was compared with the earlier TBDFA samples. The gain for TBDFA-1, with the highest Tm/Bi ratio, showed no shift at the 1800 nm region, while TBDFA-2 and TBDFA-3, possessing a lower Tm/Bi concentration ratio, shifted to the region of 1950 and 1960 nm, respectively. The gain shifting from 1460 nm to 1490 nm is also observed. The numerical model demonstrates that the common 3F4 layer for 1460 nm emission (3H4→3F4), and 1800 nm emission (3F4→3H6)inversely affects the 1460 nm and 1800 nm gain shifting.