Organic Polymer Dots Photocatalyze CO2 Reduction in Aqueous Solution.

Developing low-cost and efficient photocatalysts to convert CO2 into valuable fuels is desirable to realize a carbon-neutral society. In this work, we report that polymer dots (Pdots) of poly[(9,9'-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-thiadiazole)] (PFBT), without adding any extra co-catalyst, can photocatalyze reduction of CO2 into CO in aqueous solution, rendering a CO production rate of 57 µmol g-1 h-1 with a detectable selectivity of up to 100 %. After 5 cycles of CO2 re-purging experiments, no distinct decline in CO amount and reaction rate was observed, indicating the promising photocatalytic stability of PFBT Pdots in the photocatalytic CO2 reduction reaction. A mechanistic study reveals that photoexcited PFBT Pdots are reduced by sacrificial donor first, then the reduced PFBT Pdots can bind CO2 and reduce it into CO via their intrinsic active sites. This work highlights the application of organic Pdots for CO2 reduction in aqueous solution, which therefore provides a strategy to develop highly efficient and environmentally friendly nanoparticulate photocatalysts for CO2 reduction.

Promoted Charge Separation and Long-Lived Charge-Separated State in Porphyrin-Viologen Dyad Nanoparticles.

Developing light-harvesting systems with efficient photoinduced charge separation and long-lived charge-separated (CS) state is desirable but still challenging. In this study, we designed a zinc porphyrin photosensitizer covalently linked with viologen (ZnP-V) that can be prepared into nanoparticles in aqueous solution. In DMF solution, the monomeric ZnP-V dyads show no electron transfer between the ZnP and viologen units. In contrast, the ZnP-V nanoparticles in aqueous solution show fast charge separation with a CS state lifetime of up to 4.3 ms. This can be attributed to charge hopping induced by aggregation or distance modification between the donor and acceptor induced by electronic interaction. Nevertheless, the lifetime of the CS state is orders of magnitude longer than for molecular aggregates reported previously. The ZnP-V nanoparticles show enhanced photocatalytic hydrogen production as compared to the ZnP nanoparticles and still hold promise for other applications such as photovoltaic devices and photoredox catalysis.

Phenoxazine-based small molecule heterojunction nanoparticles for photocatalytic hydrogen production.

A phenoxazine-based small organic molecular donor POZ-M is designed and synthesized to prepare organic heterojunction nanoparticles (NPs) with a small molecular acceptor ITIC for photocatalytic hydrogen production, giving a reaction rate of up to 63 mmol g-1 h-1. A beneficial molecular design strategy highlights the role of miscibility between POZ-M and ITIC, which is necessary to achieve satisfactory charge separation at the donor/acceptor interface.

Photosynthetic Polymer Dots-Bacteria Biohybrid System Based on Transmembrane Electron Transport for Fixing CO2 into Poly-3-hydroxybutyrate.

Organic semiconductor-microbial photosynthetic biohybrid systems show great potential in light-driven biosynthesis. In such a system, an organic semiconductor is used to harvest solar energy and generate electrons, which can be further transported to microorganisms with a wide range of metabolic pathways for final biosynthesis. However, the lack of direct electron transport proteins in existing microorganisms hinders the hybrid system of photosynthesis. In this work, we have designed a photosynthetic biohybrid system based on transmembrane electron transport that can effectively deliver the electrons from organic semiconductor across the cell wall to the microbe. Biocompatible organic semiconductor polymer dots (Pdots) are used as photosensitizers to construct a ternary synergistic biochemical factory in collaboration with Ralstonia eutropha H16 (RH16) and electron shuttle neutral red (NR). Photogenerated electrons from Pdots promote the proportion of nicotinamide adenine dinucleotide phosphate (NADPH) through NR, driving the Calvin cycle of RH16 to convert CO2 into poly-3-hydroxybutyrate (PHB), with a yield of 21.3 ± 3.78 mg/L, almost 3 times higher than that of original RH16. This work provides a concept of an integrated photoactive biological factory based on organic semiconductor polymer dots/bacteria for valuable chemical production only using solar energy as the energy input.

Preparation, characterization, evaluation and mechanistic study of organic polymer nano-photocatalysts for solar fuel production.

Production of renewable fuels from solar energy and abundant resourses, such as water and carbon dioxide, via photocatalytic reactions is seen as a promising strategy to adequately address the climate challenge. Photocatalytic systems based on organic polymer nanoparticles (PNPs) are seen as one avenue to transform solar energy into hydrogen and other solar fuels. Semiconducting PNPs are light-harvesting materials with exceptional optical properties, photostability, low cost and low cytotoxity, whose performance surpasses conventional organic dyes and inorganic semiconductors. This review introduces the optimization strategies for the preparation methods of PNP via cocatalyst loading and morphology tuning. We present an analysis on how the preparative methods will impact the physico-chemical properties of these materials, and thus the catalytic activity. A list of experimental techniques is presented for characterization of the physico-chemical properties (optical, morphological, electrochemical and catalytic properties) of PNPs. We provide detailed analysis of PNP photochemistry during photocatalysis with focus on the mechanistic understanding of processes of internal charge generation and transport to the catalyst. This tutorial review provides the reader with the guidelines on current strategies used to optimize PNP performance highlighting the future directions of polymer nano-photocatalysts development.

Polymer Dots as Photoactive Membrane Vesicles for [FeFe]-Hydrogenase Self-Assembly and Solar-Driven Hydrogen Evolution.

A semiartificial photosynthesis approach that utilizes enzymes for solar fuel production relies on efficient photosensitizers that should match the enzyme activity and enable long-term stability. Polymer dots (Pdots) are biocompatible photosensitizers that are stable at pH 7 and have a readily modifiable surface morphology. Therefore, Pdots can be considered potential photosensitizers to drive such enzyme-based systems for solar fuel formation. This work introduces and unveils in detail the interaction within the biohybrid assembly composed of binary Pdots and the HydA1 [FeFe]-hydrogenase from Chlamydomonas reinhardtii. The direct attachment of hydrogenase on the surface of toroid-shaped Pdots was confirmed by agarose gel electrophoresis, cryogenic transmission electron microscopy (Cryo-TEM), and cryogenic electron tomography (Cryo-ET). Ultrafast transient spectroscopic techniques were used to characterize photoinduced excitation and dissociation into charges within Pdots. The study reveals that implementation of a donor-acceptor architecture for heterojunction Pdots leads to efficient subpicosecond charge separation and thus enhances hydrogen evolution (88 460 µmolH2·gH2ase-1·h-1). Adsorption of [FeFe]-hydrogenase onto Pdots resulted in a stable biohybrid assembly, where hydrogen production persisted for days, reaching a TON of 37 500 ± 1290 in the presence of a redox mediator. This work represents an example of a homogeneous biohybrid system combining polymer nanoparticles and an enzyme. Detailed spectroscopic studies provide a mechanistic understanding of light harvesting, charge separation, and transport studied, which is essential for building semiartificial photosynthetic systems with efficiencies beyond natural and artificial systems.

Trapping an Oxidized and Protonated Intermediate of the [FeFe]-Hydrogenase Cofactor under Mildly Reducing Conditions.

The H-cluster is the catalytic cofactor of [FeFe]-hydrogenase, a metalloenzyme that catalyzes the formation of dihydrogen (H2). The catalytic diiron site of the H-cluster carries two cyanide and three carbon monoxide ligands, making it an excellent target for IR spectroscopy. In previous work, we identified an oxidized and protonated H-cluster species, whose IR signature differs from that of the oxidized resting state (Hox) by a small but distinct shift to higher frequencies. This "blue shift" was explained by a protonation at the [4Fe-4S] subcomplex of the H-cluster. The novel species, denoted HoxH, was preferentially accumulated at low pH and in the presence of the exogenous reductant sodium dithionite (NaDT). When HoxH was reacted with H2, the hydride state (Hhyd) was formed, a key intermediate of [FeFe]-hydrogenase turnover. A recent publication revisited our protocol for the accumulation of HoxH in wild-type [FeFe]-hydrogenase, concluding that inhibition by NaDT decay products rather than cofactor protonation causes the spectroscopic "blue shift". Here, we demonstrate that HoxH formation does not require the presence of NaDT (or its decay products), but accumulates also with the milder reductants tris(2-carboxyethyl)phosphine, dithiothreitol, or ascorbic acid, in particular at low pH. Our data consistently suggest that HoxH is accumulated when deprotonation of the H-cluster is impaired, thereby preventing the regain of the oxidized resting state Hox in the catalytic cycle.

Hybrid compound based on diethylenetriaminecopper(ii) cations and scarce V-monosubstituted ß-octamolybdate as water oxidation catalyst.

Herein, we report on a new hybrid compound (NH4){[Cu(dien)(H2O)2]2[ß-VMo7O26]}·1.5H2O (1), where dien = diethylenetriamine, containing an extremely rare mixed-metal pseudo-octamolybdate cluster. An ex situ EPR spectroscopy provided insights into the formation of paramagnetic species in reaction mixture and in solution of 1. The magneto-structural correlations revealed weak antiferromagnetic exchange interactions between the [Cu(dien)]2+ cations transmitted by intermolecular pathways. The cyclic voltammetry showed the one-electron process associated with the Cu3+/Cu2+ oxidation followed by the multi-electron catalytic wave due to water oxidation with a faradaic yield of 86%. The title compound was thus employed in homogeneous water oxidation catalysis using tris(bipyridine)ruthenium photosensitizer. At pH 8.0, efficiency of the catalytic system attained 0.19 turnovers per second supported by the relatively mild water oxidation overpotential of 0.54 V.

Photoinduced hole transfer from tris(bipyridine)ruthenium dye to a high-valent iron-based water oxidation catalyst.

An efficient water oxidation system is a prerequisite for developing solar energy conversion devices. Using advanced time-resolved spectroscopy, we study the initial catalytic relevant electron transfer events in the light-driven water oxidation system utilizing [Ru(bpy)3]2+ (bpy = 2,2'-bipyridine) as a light harvester, persulfate as a sacrificial electron acceptor, and a high-valent iron clathrochelate complex as a catalyst. Upon irradiation by visible light, the excited state of the ruthenium dye is quenched by persulfate to afford a [Ru(bpy)3]3+/SO4˙- pair, showing a cage escape yield up to 75%. This is followed by the subsequent fast hole transfer from [Ru(bpy)3]3+ to the FeIV catalyst to give the long-lived FeV intermediate in aqueous solution. In the presence of excess photosensitizer, this process exhibits pseudo-first order kinetics with respect to the catalyst with a rate constant of 3.2(1) × 1010 s-1. Consequently, efficient hole scavenging activity of the high-valent iron complex is proposed to explain its high catalytic performance for water oxidation.

Hydrated Electron Generation by Excitation of Copper Localized Surface Plasmon Resonance.

Hydrated electrons are important in radiation chemistry and charge-transfer reactions, with applications that include chemical damage of DNA, catalysis, and signaling. Conventionally, hydrated electrons are produced by pulsed radiolysis, sonolysis, two-ultraviolet-photon laser excitation of liquid water, or photodetachment of suitable electron donors. Here we report a method for the generation of hydrated electrons via single-visible-photon excitation of localized surface plasmon resonances (LSPRs) of supported sub-3 nm copper nanoparticles in contact with water. Only excitations at the LSPR maximum resulted in the formation of hydrated electrons, suggesting that plasmon excitation plays a crucial role in promoting electron transfer from the nanoparticle into the solution. The reactivity of the hydrated electrons was confirmed via proton reduction and concomitant H2 evolution in the presence of a Ru/TiO2 catalyst.

Efficient visible light-driven water oxidation catalysed by an iron(iv) clathrochelate complex.

A water-stable FeIV clathrochelate complex catalyses fast and homogeneous photochemical oxidation of water to dioxygen with a turnover frequency of 2.27 s-1 and a maximum turnover number of 365. An FeV intermediate generated under catalytic conditions is trapped and characterised using EPR and Mössbauer spectroscopy.

Nano-hybrid plasmonic photocatalyst for hydrogen production at 20% efficiency.

The efficient conversion of light energy into chemical energy is key for sustainable human development. Several photocatalytic systems based on photovoltaic electrolysis have been used to produce hydrogen via water reduction. However, in such devices, light harvesting and proton reduction are carried separately, showing quantum efficiency of about 10-12%. Here, we report a nano-hybrid photocatalytic assembly that enables concomitant reductive hydrogen production and pollutant oxidation with solar-to-fuel efficiencies up to 20%. The modular architecture of this plasmonic material allows the fine-tuning of its photocatalytic properties by simple manipulation of a reduced number of basic components.

Direct Determination of Metal Complexes' Interaction with DNA by Atomic Telemetry and Multiscale Molecular Dynamics.

The lack of molecular mechanistic understanding of the interaction between metal complexes and biomolecules hampers their potential medical use. Herein we present a robust procedure combining resonant X-ray emission spectroscopy and multiscale molecular dynamics simulations, which allows for straightforward elucidation of the precise interaction mechanism at the atomic level. The report unveils an unforeseen hydrolysis process and DNA binding of [Pt{N(p-HC6F4)CH2}2py2] (Pt103), which showed potential cytotoxic activity in the past. Pt103 preferentially coordinates to adjacent adenine sites, instead of guanine sites as in cisplatin, because of its hydrogen bond ability. Comparison with previous research on cisplatin suggests that selective binding to guanine or adenine may be achieved by controlling the acidity of the compound.

Homogeneous Cobalt/Vanadium Complexes as Precursors for Functionalized Mixed Oxides in Visible-Light-Driven Water Oxidation.

The heterometallic complexes (NH4 )2 [Co(H2 O)6 ]2 [V10 O28 ]⋅4 H2 O (1) and (NH4 )2 [Co(H2 O)5 (ß-HAla)]2 [V10 O28 ]⋅4 H2 O (2) have been synthesized and used for the preparation of mixed oxides as catalysts for water oxidation. Thermal decomposition of 1 and 2 at relatively low temperatures (<500 °C) leads to the formation of the solid mixed oxides CoV2 O6 /V2 O5 (3) and Co2 V2 O7 /V2 O5 (4). The complexes (1, 2) and heterogeneous materials (3, 4) act as catalysts for photoinduced water oxidation. A modification of the thermal decomposition procedure allowed the deposition of mixed metal oxides (MMO) on a mesoporous TiO2 film. The electrodes containing Co/V MMOs in TiO2 films were used for electrocatalytic water oxidation and showed good stability and sustained anodic currents of about 5 mA cm-2 at 1.72 V versus relative hydrogen electrode (RHE). This method of functionalizing TiO2 films with MMOs at relatively low temperatures (<500 °C) can be used to produce other oxides with different functionality for applications in, for example, artificial photosynthesis.

Structural transformation of Bi1-x/3V1-xMoxO4 solid solutions for light-driven water oxidation.

The influence of molybdenum content in the solid solutions of Bi1-x/3V1-xMoxO4 (x = 0.05-0.20) on the morphology, band gap, structure and light-driven water oxidation properties has been studied by scanning electron microscopy, X-ray powder diffraction and vibrational spectroscopy (Raman and infrared). To find out the peculiarities of structural changes for bismuth scheelite-related oxides containing both vanadium and molybdenum crystals of Bi0.98V0.93Mo0.07O4 have been grown from a K-Bi-V-Mo-O high-temperature melt and characterized by single crystal X-ray diffraction. For the scheelite-related framework both V and Mo were found to occupy the same positions lowering the point group symmetry of tetrahedra from 4/m to 2/m giving monoclinic distortion for solid solutions with x = 0.05-0.10. The most promising photocatalytic performance was obtained for Bi0.96Mo0.10V0.90O4, in which the oxygen evolution could reach 21 µM in 50 s under visible light of LEDs, λ = 470 ± 10 nm, and 820 µE cm(-2) s(-1). The changes in catalytic properties are shown to be governed by a crystal structure strain with a maximum obtained for the boundary sample between the monoclinic and tetragonal phase.