Direct Multimodal Nanoscale Visualization of Early Phosphorus-Based Antiwear Tribofilm Formation.

Understanding the mechanism of antiwear (AW) tribofilm formation and how to tune surface chemistry to control functionality is essential for the development of the next generation of oil lubricants. In particular, understanding and optimizing early AW tribofilm formation can increase the energy efficiency of mechanical systems. However, the mechanism for how these films form is not well understood. The majority of prior work has focused on analyzing only end-of-test surfaces long after the film has formed. In this work, we develop an in situ multimodal chemical imaging methodology to directly visualize the early formation of AW films on steel surfaces. We investigate an oil formulation containing a phosphorus-based additive commonly used to protect surfaces from wear and fatigue processes in machine elements, such as gears, bearings, and sliding contacts. Using nanoscale multimodal chemical imaging on combined platforms of atomic force microscopy (AFM) coupled directly with in situ nano-infrared (nano-IR) spectroscopy, and further combined ex situ with time-of-flight secondary ion mass spectrometry (ToF-SIMS), we demonstrate a direct correlation between changes in friction and local surface chemistry. In these experiments, the AFM probe acts as a single asperity contact to generate the tribofilm as well as a tool to analyze it in situ as it is forming. To verify our in situ measurements, we compare these results to the ex situ ToF-SIMS of macroscale block-on-ring tribometer-formed samples. The understanding gained here on how AW films form and how film properties can be modified by tuning the chemistry of the additives will facilitate developing transmission fluids to meet increasing demands for vehicle performance and efficiency.

Multimodal Chemical Imaging for Linking Adhesion with Local Chemistry in Agrochemical Multicomponent Polymeric Coatings.

Seed coatings improve germination and offer higher crop yields through a blend of active ingredients (such as insecticides and fungicides), polymers, waxes, fillers, and pigments. To reach their full potential, fundamental formulation challenges bridging structure and function need to be addressed. In some instances, during industrial-volume packing and transportation, coated seeds do not flow well through elevators, conveyers, and applicators, which may reduce yield and add cost. In this work, we illustrate a combinatorial chemical imaging approach to study seed coatings at the microscale to link chemical and physical properties responsible for low seed flowability. The local chemical composition was examined using time-of-flight secondary ion mass spectrometry (ToF-SIMS) and at comparable length scales, the local adhesive properties were examined using atomic force microscopy (AFM) force volume mapping. The link between the chemical and the adhesive properties was established by non-negative matrix factorization (NMF). The correlative multimodal imaging approach developed here utilizing AFM force volume mapping, ToF-SIMS chemical mapping, and data analytics offers a path for linking function with localized chemistry when investigating multicomponent soft material systems.

The influence of nearest-neighbour interactions and assembly dynamics on the transport properties of porphyrin supramolecular assemblies on Au(111).

Here we report on the effect of local molecular organization or "tertiary structure" on the charge transport properties of thiol-tethered tetraphenylporphyrin (ZnTPPF4-SC5SH) nanoscale clusters of ca. 5 nm in lateral dimension embedded within a dodecanethiol (C12) monolayer on Au(111). The structure of the clusters in the mixed monolayers and their resulting transport properties were monitored by Atomic Force Microscopy (AFM), Scanning Tunneling Microscopy (STM) and Spectroscopy (STS). The mixed films were deposited on Au(111) for a period of one to five days, during which the lateral dimensions of the ZnTPPF4-SC5SH islands that were formed after one day reduced by nearly 35% on average by five days, accompanied by a noticeable depletion of the surrounding C12 monolayer. These subtle changes in mixed monolayer morphology were accompanied by drastic differences in conductance. The ZnTPPF4-SC5SH clusters assembled for one day exhibited highly reproducible I-V spectra with simple tunneling behavior. By three days, this evolved into bias-induced switching of conductance, with a ∼100-1000 fold increase. Furthermore, current fluctuations started to become significant, and then dominated transport across the ZnTPPF4-SC5SH clusters assembled over five days. Our data suggests that this evolution can be understood by slow surface diffusion, enabling the ZnTPPF4-SC5SH molecules to overcome initial steric hindrance in the early stages of island formation in the C12 monolayer (at day one), to reach a more energetically-favored, close-packed organization, as noted by the decrease in island size (by day three). However, when desorption of the supporting matrix of C12 became pronounced (by day five), the ZnTPPF4-SC5SH clusters began to lose stabilization, and stochastic switching was then observed to dominate transport in the clusters, illustrating the critical nature of the local organization on these transport properties.

Studies of the structure and phase transitions of nano-confined pentanedithiol and its application in directing hierarchical molecular assemblies on Au(1 1 1).

Directing molecular devices into pre-designed integrated electronic circuits while enforcing selectivity and hierarchy is an inherent challenge for molecular electronics. Here we explore ways to direct the assembly of electrically-active molecular monolayers into specific locations as well as controlling their internal organization. We have accomplished this by two consecutive surface reactions: (1) forming pentanedithiol (C5DT) domains within an inert alkanethiol self-assembled monolayer (SAM) on Au; and (2) selectively binding porphyrin derivatives to the C5DT domains. The C5DT domains were fabricated by phase segregation during co-adsorption from a mixed C5DT/dodecanethiol (C12) solution and nanografting with Atomic Force Microscopy (AFM). AFM revealed that co-absorbed and nanografted C5DT domains were in a standing-up phase and scanning tunneling microscopy (STM) showed that their molecular organization within about 5 nm, 40 nm, 50 nm and 120 nm domains, was dependent upon the size of the domain, such that structure of the C5DT transitions from (√3 × âˆš3) R30°, to (2 × 2), and ultimately to a disordered phase with increasing domain size. This is due to the varying degrees of influence of the surrounding C12; providing sufficient van der Waals interactions as well as a geometric confinement to stabilize the standing-up phase of the C5DT. Understanding the molecular configuration of dithiol SAMs affords their use as a reactive template to subsequently bind active head groups. As a proof of principle, porphyrins with a pendant pentafluorophenyl ring were attached to the C5DT domains by a 'click' reaction between the fluorinated ring and the free thiol on the surface. From AFM and STM, these porphyrin derivatives reacted selectively with the C5DT domains with some porphyrins binding directly to the C5DT, subsequently allowing additional localized porphyrin deposition through pi-stacking.