Laryngeal Cancer Cells Metabolize 25-Hydroxyvitamin D3 and Respond to 24R,25-dihydroxyvitamin D3 via a Mechanism Dependent on Estrogen Receptor Levels.

Studies have evaluated vitamin D3's therapeutic potential in estrogen-responsive cancers, with conflicting findings. We have shown that the proliferation of breast cancer cells is regulated by 24R,25-dihydroxyvitamin D3 (24R,25(OH)2D3) depending on estrogen receptor alpha 66 (ERα66) expression, suggesting that this could also be the case for estrogen-sensitive laryngeal cancer cells. Accordingly, we examined levels of ERα isoforms in ERα66-positive UM-SCC-12 and ERα66-negative UM-SCC-11A cells and their response to 24R,25(OH)2D3. 24R,25(OH)2D3 stimulated proliferation, increased the expression of metastatic markers, and inhibited apoptosis in UM-SCC-12 cells while having the opposite effect in UM-SCC-11A cells. To evaluate if vitamin metabolites could act via autocrine/paracrine mechanisms, we assessed the expression, protein levels, and activity of vitamin D3 hydroxylases CYP24A1 and CYP27B1. Both cell types expressed both mRNAs; but the levels of the enzymes and their activities were differentially regulated by estrogen. ERα66-negative UM-SCC-11A cells produced more 24,25(OH)2D3 than UM-SCC-12 cells, but comparable levels of 1,25(OH)2D3 when treated with 25(OH)D3 These results suggest that the regulation of vitamin D3 metabolism in laryngeal cancer cells is modulated by ERα66 expression, and support a role for 24R,25(OH)2D3 as an autocrine/paracrine regulator of laryngeal cancer. The local metabolism of 25(OH)D3 should be considered when determining the potential of vitamin D3 in laryngeal cancer.

Local production of active vitamin D3 metabolites in breast cancer cells by CYP24A1 and CYP27B1.

The role of vitamin D3 and its metabolites in cancer and especially as a treatment option has been widely disputed. Clinicians noting low serum 25-hydroxyvitamin D3 [25(OH)D3] levels in their patients, recommend vitamin D3 supplementation as a method of reducing the risk of cancer; however, data supporting this are inconsistent. These studies rely on systemic 25(OH)D3 as an indicator of hormone status, but 25(OH)D3 is further metabolized in the kidney and other tissues under regulation by several factors. This study examined if breast cancer cells also possess the ability to metabolize 25(OH)D3, and if so, whether the resulting metabolites are secreted locally; if this ability reflects ERα66 status; and if they possess vitamin D receptors (VDR). To address this question, estrogen receptor alpha (ERα) positive (MCF-7) and ERα negative (HCC38 and MDA-MB-231) breast cancer cell lines were examined for expression of ERα66, ERα36, CYP24A1, CYP27B1, and VDR as well as for local production of 24,25-dihydroxyvitamin D3 [24,25(OH)2D3] and 1,25-dihydroxyvitamin D3 [1,25(OH)2D3] after treatment with 25(OH)D3. The results showed that independent of ER status, breast cancer cells express the enzymes CYP24A1 and CYP27B1, which are responsible for converting 25(OH)D3 into its dihydroxylated forms. Moreover, these metabolites are produced at levels comparable to the levels observed in blood. They are positive for VDR, indicating that they can respond to 1α,25(OH)2D3, which can upregulate CYP24A1. These findings suggest that vitamin D metabolites may contribute to the tumorigenicity of breast cancer via autocrine and/or paracrine mechanisms.

Advancing the use of molecularly imprinted polymers in bioanalysis: the selective extraction of cotinine in human urine.

Aim: To characterize a molecularly imprinted polymer via precipitation polymerization for the extraction of cotinine in urine. Methods: The polymer was created via precipitation polymerization. Physical characteristics of the polymer were assessed via scanning electron microscopy, Fourier transform infrared spectroscopy and thermogravimetric analysis. The polymer adsorption capacity was assessed and an solid-phase extraction method from urine by LC-MS/MS was developed. Results: The polymer had small, spherical morphology and little thermal decomposition. The extraction method yielded cotinine recoveries of 77-103% in urine. The molecularly imprinted polymer adsorption capacity for cotinine was 448.2 ± 2.1 µg/mg. Common interferants did not affect cotinine's extraction. Conclusion: The resulting polymer was determined to be specific for cotinine and can be used for the detection of cotinine in urine for clinical samples.

A determination of the aerosolization efficiency of drugs of abuse in a eutectic mixture with nicotine in electronic cigarettes.

Eutectic mixtures can be formed by adding drugs other than nicotine (DOTNs) to nicotine-based e-liquids in electronic cigarettes (e-cigarettes). Thus, the interaction between nicotine e-liquids and DOTNs must be evaluated. Presented is the change in e-cigarette aerosolization of nicotine and methadone alone versus a 1:1 nicotine:methadone mixture to evaluate the possible formation of a eutectic mixture that can result in an increase of drug delivery. E-liquids were prepared in-house using 1:1 propylene glycol (PG):vegetable glycerin (VG) as a base plus nicotine, methadone hydrochloride, or 1:1 nicotine:methadone hydrochloride. The e-liquids were aerosolized via an automated vaping machine using parameters adopted from the Cooperation Centre for Scientific Research Relative to Tobacco (CORESTA) E-cigarette Task Force method. Drug recovery was determined by capturing the aerosol from 15 puffs generated by the e-cigarette. Concentrations of nicotine and methadone aerosolized were determined by gas chromatography-mass spectrometry using nicotine (n = 3), methadone (n = 3), and combined nicotine/methadone e-liquids (n = 3), each prepared in-house at 12 mg/ml. The concentration of nicotine and methadone in 15 puffs of the single drug e-liquids were determined to be 1.60 ± 0.20 and 2.67 ± 0.12 mg, respectively. The concentration of nicotine and methadone in 15 puffs of the multidrug e-liquid were determined to be 3.66 ± 0.49 and 3.65 ± 0.10 mg, respectively. The single nicotine and methadone e-liquids had recoveries of 70 ± 0.1% and 84 ± 0.1%, respectively. In the 1:1 mixture, the recovery of both drugs increased. The development of a eutectic mixture can promote aerosolization of the drug and deliver a greater dose to the user.

Gas-Phase External Solvation of Protonated Benzonitrile by Eight Methanol Molecules.

The gas-phase sequential association of methanol onto protonated benzonitrile (C6H5CNH+) and the proton-bound dimer (C6H5CN)2H+ have been examined experimentally by equilibrium thermochemical measurements and computationally by density functional theory (DFT). The bonding enthalpy (ΔH°) for the association of methanol with protonated benzonitrile (25.2 kcal mol-1) reflects the strong electrostatic interaction provided by the formation of an ionic hydrogen bond in the C6H5CNH+OHCH3 cluster in excellent agreement with a DFT-calculated binding energy of 24.9 kcal mol-1. The sequential bonding enthalpy within the (C6H5CN)H+(OHCH3)n clusters decreases from 25.2 to 10.6 kcal mol-1 for the eighth solvation step (n = 8), which remains more than 25% above the enthalpy of vaporization of liquid methanol (8.4 kcal mol-1). The nonbulk convergence of ΔH°n-1,n with eight solvent molecules is attributed to the external solvation of a benzonitrile molecule by an extended hydrogen bonding network of protonated methanol clusters H+(CH3OH)n. In the external solvation of protonated benzonitrile by methanol, the proton resides on the methanol subcluster and the neutral benzonitrile molecule remains outside and bonded to the surface of the protonated methanol cluster. The bonding enthalpy of methanol to the proton-bound benzonitrile dimer (C6H5CN)H+(NCC6H5) is measured to be 18.0 kcal mol-1, in good agreement with a DFT-calculated value of 17.1 kcal mol-1, which reflects the association of the proton with the lower proton affinity methanol molecule, thus forming a highly stable structure of protonated methanol terminated by two ionic hydrogen bonds to the two benzonitrile molecules. The external solvation of benzonitrile by methanol ices in space allows benzonitrile to remain on the ice grain surface rather than being isolated inside the ice. This could provide accessibility for reactions with incoming ions and molecules or for photochemical processes by UV irradiation, leading to the formation of complex organics on the surface of ice grains.

Water-Assisted Proton Transfer in the Sequential Hydration of Benzonitrile Radical Cation C6H5CN•+(H2O)n: Transition to Hydrated Distonic Cation •C6H4CNH+(H2O)n with n ≥ 4.

The stepwise hydration of the benzonitrile•+ radical cation with one-seven H2O molecules was investigated experimentally and computationally with density functional theory in C6H5CN•+(H2O)n clusters. The stepwise binding energies (ΔHn-1,n°) were determined by equilibrium measurements for C6H5CN•+(H2O) and for •C6H4CNH+(H2O)n with n = 5, 6, and 7 to be 8.8 and 11.3, 11.0, and 10.0 kcal/mol, respectively. The populations of n = 2 and 3 of the C6H5CN•+(H2O)n clusters were observed only in trace abundance due to fast depletion processes leading to the formation of the hydrated distonic cations •C6H4CNH+(H2O)n with n = 4-7. The observed transition occurs between conventional radical cations hydrated on the ring in C6H5CN•+(H2O)n clusters with n = 1-3 and the protonated radical •C6H4CNH+ (distonic ion) formed by a proton transfer to the CN nitrogen and ionic hydrogen bonding to water molecules in •C6H4CNH+(H2O)n clusters with n = 4-7. The measured binding energy of the hydrated ion C6H5CN•+(H2O) (8.8 kcal/mol) is similar to that of the hydrated benzene radical cation (8.5 kcal/mol) that involves a relatively weak CHδ+···O hydrogen bonding interaction. Also, the measured binding energies of the •C6H4CNH+(H2O)n clusters with n = 5-7 are similar to those of the protonated benzonitrile (methanol)n clusters [C6H5CNH+(CH3OH)n, n = 5-7] that involve CNH+···O ionic hydrogen bonds. The proton shift from the para-•C ring carbon to the nitrogen of the benzonitrile radical cation is endothermic without solvent but thermoneutral for n = 1 and exothermic for n = 2-4 in C6H5CN•+(H2O)n clusters to form the distonic •C6H4CN···H+(OH2)n clusters. The distonic clusters •C6H4CN···H+(OH2)n constitute a new class of structures in radical ion/solvent clusters.

Characterization of molecularly imprinted polymers for the extraction of tobacco alkaloids and their metabolites in human urine.

Molecularly imprinted polymers (MIPs) are synthetic polymers designed to selectively extract target analytes from complex matrices (including biological matrices). The literature shows that MIPs have a degree of cross-selectivity from analytes within the same class of compounds. A commercially available MIP for tobacco-specific nitrosamines (TSNAs) is designed to be class selective for four TSNA compounds. This study sought to characterize the extent of cross-selectivity of the TSNA MIPs with other tobacco alkaloids. Cross-selectivity and recovery of the SupelMIP™ TSNA SPE cartridges was assessed with N-nitrosonornicotine (NNN), nicotine, cotinine and morphine. Their recoveries were compared with the recoveries of a nonimprinted polymer SPE cartridge, and two traditional SPE cartridges: a Waters mixed-mode cation exchange cartridge and a Waters hydrophilic-lipophilic balance cartridge. NNN and cotinine had the highest recoveries with the MIP cartridge, over 80%, and cotinine samples in urine had >80% recoveries. Nicotine had highly variable recoveries, possibly owing to differing chemical properties from the TSNAs. All three analytes had significantly different recoveries with the MIP cartridges compared with the traditional SPE cartridges. Morphine displayed nonspecific interactions with the MIP cartridges. Utilization of the TSNAs' cross-selectivity allows for simultaneous extraction and identification of multiple tobacco biomarkers using one extraction technique.

Direct analysis of tobacco specific nitrosamines in tobacco products using a molecularly imprinted polymer-packed column.

Tobacco specific nitrosamines (TSNAs) are highly carcinogenic by-products in tobacco samples, and their presence is regulated by the Food and Drug Administration. Molecularly imprinted polymers (MIPs) are synthetic polymers that have been "imprinted" with a template analyte in a co-polymer system, and can selectively extract analytes from complex matrices. MIPs can be incorporated into online systems, replacing traditional high performance liquid chromatography (HPLC) columns. MIP material specific for TSNAs was packed into an empty HPLC column using a slurry packing technique. The developed method with the MIP-packed HPLC column was validated on a LC-MS/MS system for the quantitation of N-nitrosonornicotine (NNN) and 4- (methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) in commercial tobacco products. The method was linear over .1-10 ng/ml (.4-10 µg/g) for NNN and NNK. The limit of detection (LOD) was .03 ng/ml (12 µg/g) and the limit of quantitation (LOQ), .1 ng/ml (.4 µg/g). All column uniformity parameters with the exception of theoretical plate number were within the accepted criteria (% RSD values <15%). Theoretical plate number was <250, owing to the large (50 µm) sized MIP particles. Twenty-six tobacco products contained TSNA concentrations that were consistent with reported literature values. The TSNA-MIP based HPLC column effectively replaced a traditional reverse phase HPLC column, and was used for the direct analysis of nicotine and tobacco products without extensive sample preparation prior to instrumental analysis.

LC-MS/MS method for simultaneous quantification of dexamethasone and tobramycin in rabbit ocular biofluids.

The complexity of Tobradex® ointment formulation (dexamethasone 0.1 wt% and tobramycin 0.3 wt%) and the high cost of pharmacokinetic (PK) studies in human aqueous humor may prevent generic drug companies from moving forward with a Tobradex®-equivalent product development. The in vitro drug release test would be an alternative approach for differentiating the generic formulations containing both dexamethasone (DEX) and tobramycin (TOB), and the results should be correlated with the in vivo ocular PK studies for further evaluation. To facilitate the in vivo ocular PK studies, a sensitive, rapid and specific liquid chromatography-tandem mass spectrometry (LC-MS/MS) method that can simultaneously quantify both DEX and TOB in rabbit ocular matrices including tear, aqueous humor and cornea was established and validated. The lower limit of quantification (LLOQ) was 1.5 ng/ml for DEX and 3 ng/ml for TOB with good precision and accuracy. Both intra- and inter-batch precisions were within ±15%, and the accuracy for all QCs was within the range of 85-115%. This new method was successfully applied for a pilot pharmacokinetic analysis of DEX and TOB in rabbit tears after topical administration of Tobradex® ointment.

Potential factors affecting free base nicotine yield in electronic cigarette aerosols.

BACKGROUND: The free base and protonated nicotine forms in e-cigarette aerosol have shown different absorption profiles in users. Therefore, it is also important to identify the factors which can affect the ratio of these nicotine forms in the aerosol. Such factors may include nicotine concentrations, flavors, PG:VG ratios, types of nicotine chemical compounds and e-cigarette battery power outputs. The current study attempts to identify such factors using a controlled experiment. RESEARCH DESIGNS AND METHODS: The aerosol was generated using validated aerosol generating model. Various factors were tested for their effect on nicotine forms. Additionally, a degradation study of one of the nicotine compounds, nicotine salicylate, was also carried out using mass spectrometry. RESULTS: The free base nicotine in the aerosol was found to be affected by flavors, battery power output, nicotine compound type and PG:VG ratios. Based on the preliminary mass spectrometry data, degradation of nicotine salicylate was found to be one of the significant factors affecting free base nicotine in aerosol. CONCLUSIONS: Potential factors affecting free base nicotine in e-cigarette aerosol have been identified in this study. These findings would help in understanding the nicotine delivery better and assist for better regulations.

Structures of benzonitrile dimer radical cation and the protonated dimer: Observation of hydronium ion core solvated by benzonitrile molecules.

The recent discovery of benzonitrile (C6H5CN), one of the simplest nitrogen-bearing polar aromatic molecules, in the interstellar medium motivates structural characterization of the benzonitrile-containing molecular ions as potential precursors for nitrogen-containing complex organics in space. Herein, we present mass-selected ion mobility measurements combined with density functional theory (DFT) calculations to reveal, for the first time, the structures of the benzonitrile dimer radical cation, the protonated dimer, and the protonated hydrated small clusters in the gas phase. The measured collision cross sections of the investigated ions in helium are in excellent agreement with the calculated values of the lowest energy DFT structures. Unlike the dimer radical cations of nonpolar aromatic molecules which adopt parallel sandwich configurations, the (C6H5CN)2 ·+ displays a symmetrically planar geometry with a double hydrogen bond formed between the nitrogen and hydrogen atoms. The protonated dimer has the structure of a proton-bound dimer (C6H5CNH+NCC6H5) where the bridging proton connects the nitrogen atoms in the two benzonitrile molecules resulting in a calculated collision cross section of 101.1 Å2 in excellent agreement with the measured value of 103.3 Å2. The structure of the hydrated protonated trimer consists of a hydronium ion core solvated by three benzonitrile molecules. By locating the proton on the lower proton affinity water molecule, the resulting hydronium ion can be fully solvated by forming three ionic hydrogen bonds with the benzonitrile molecules. These unique structural motifs could be useful for the molecular design and recognition involving charged aromatic systems and also for the search of nitrogen-containing complex organics in space.

Ionic Hydrogen and Halogen Bonding in the Gas Phase Association of Acetonitrile and Acetone with Halogenated Benzene Cations.

We report on the gas phase association of the small polar and aprotic solvent molecules acetonitrile (CH3CN) and acetone (CH3COCH3) with the halogenated benzene radical cations (C6H5X•+, X = F, Cl, Br, and I) using the mass-selected ion mobility technique and density functional theory calculations. The association energies (-Δ H°) of CH3CN (CH3COCH3) with C6H5F•+ and C6H5I•+ are similar [13.0 (13.3) and 13.2 (14.1) kcal/mol, respectively] but higher than those of CH3CN (CH3COCH3) with C6H5Cl•+ and C6H5Br•+ [10.5 (11.5) and 10.9 (10.6) kcal/mol, respectively]. However, the electrostatic potentials of the lowest energy structures of C6H5Br•+(CH3CN) and C6H5Br•+(CH3COCH3) or C6H5I•+(CH3CN) and C6H5I•+(CH3COCH3) complexes clearly show the formation of the ionic halogen bonds (IXBs) C-Brδ+- -NCCH3 and C-Brδ+- -OC(CH3)2 or C-Iδ+- -NCCH3 and C-Iδ+- -OC(CH3)2 driven by positively charged σ-holes on the external sides of the C-Br and C-I bond axes of the bromobenzene and iodobenzene radical cations, respectively. For the C6H5F•+(CH3CN) complex, the dominant interaction involves a T-shaped structure between the N atom of CH3CN and the C atom of the C-F bond of C6H5F•+. The structure of the C6H5Cl•+(CH3CN) complex shows the formation of unconventional ionic hydrogen bonds (uIHBs) between the N atom of CH3CN and the C-H bonds of the C6H5Cl•+ cation. Similar results are obtained for the association of acetone with the halogenated benzene radical cations. The formation of IXBs of the iodobenzene cation with acetonitrile or acetone involves a significant entropy loss (-Δ S° = 25-27 cal /(mol K)) resulting from the formation of more ordered and highly directional structures between the nitrogen or oxygen lone pair of electrons of acetonitrile or acetone, respectively, and the electropositive region around the iodine atom of the iodobenzene cation. In comparison, for the association of acetonitrile or acetone with the fluorobenzene, chlorobenzene, and bromobenzene cations, -Δ S° = 16-23 cal/(mol K), consistent with the formation of less ordered structures and loose interactions. The lowest energy structures of the C6H5Br•+(CH3COCH3)2 and C6H5I•+(CH3COCH3)2 clusters show a novel combination of ionic halogen bonding and hydrogen bonding where the oxygen atom of one acetone molecule forms the halogen bond while the oxygen atom of the second acetone molecule becomes the hydrogen acceptor from the methyl group of the first acetone molecule.

Gas phase hydration of halogenated benzene cations. Is it hydrogen or halogen bonding?

Halogen bonding (XB) non-covalent interactions can be observed in compounds containing chlorine, bromine, or iodine which can form directed close contacts of the type R1-XY-R2, where the halogen X acts as a Lewis acid and Y can be any electron donor moiety including electron lone pairs on hetero atoms such as O and N, or π electrons in olefin double bonds and aromatic conjugated systems. In this work, we present the first evidence for the formation of ionic halogen bonds (IXBs) in the hydration of bromobenzene and iodobenzene radical cations in the gas phase. We present a combined thermochemical investigation using the mass-selected ion mobility (MSIM) technique and density functional theory (DFT) calculations of the stepwise hydration of the fluoro, chloro, bromo, and iodobenzene radical cations. The binding energy associated with the formation of an IXB in the hydration of the iodobenzene cation (11.2 kcal mol-1) is about 20% higher than the typical unconventional ionic hydrogen bond (IHB) of the CHδ+OH2 interaction. The formation of an IXB in the hydration of the iodobenzene cation involves a significant entropy loss (29 cal mol-1 K-1) resulting from the formation of a more ordered structure and a highly directional interaction between the oxygen lone pair of electrons of water and the electropositive region around the iodine atom of the iodobenzene cation. In comparison, the hydration of the fluorobenzene and chlorobenzene cations where IHBs are formed, -ΔS° = 18-21 cal mol-1 K-1 consistent with the formation of less ordered structures and loose interactions. The electrostatic potentials on the lowest energy structures of the hydrated halogenated benzene radical cations show clearly that the formation of an IXB is driven by a positively charged σ-hole on the external side of the halogen atom X along the C-X bond axis. The size of the σ-hole increases significantly in bromobenzene and iodobenzene radical cations which results in strong interaction potentials with the electron lone pairs of the oxygen atom of the water molecules and thus IXBs provide the most stable hydrated structures of the bromobenzene and iodobenzene radical cations. The results clearly distinguish the hydration behaviors resulting from the ionic hydrogen and halogen bonding interactions of fluorobenzene and iodobenzene cations, respectively, and establish the different bonding and structural features of the two interactions.