RESUMO
In industry, treatments against biofilms need to be optimized and, in the wastewater treatment field, biofilm composition needs to be controlled. Therefore, describing the biochemical and physical structures of biofilms is now required to better understand the influence of operating parameters and treatment on biofilms. The present study aims to investigate how growth conditions influence EPS composition, biofilm physical properties and volume detachment using a 1D biofilm model. Two types of EPS are considered in the present model, proteins and polysaccharides. The main hypotheses are that: (i) the production of polysaccharides occurs mainly under strong nutrient limitation(s) while the production of proteins is coupled to both the substrate uptake rate and the lysis process; (ii) the local biofilm porosity depends on the local biofilm composition. Both volume and surface detachment occur in biofilms and volume detachment extent depends on the biofilm local cohesion and thus on the local composition of biofilms for a given shear stress. The model is based on experimental trends and aims to represent these observations on the basis of biochemical and physical processes. Four case studies covering a wide range of contrasting growth conditions such as different COD/N ratios, applied SOLR and shear stresses are investigated. The model predicts how the biochemical and physical biofilm structures change as a result of contrasting growth conditions. More precisely simulation results are in good agreement with the main experimental observations reported in the literature, such as: (i) a strong nitrogen limitation of growth induces an important accumulation of polysaccharides leading to a more porous and homogenous biofilm, (ii) a high applied surface organic loading load allows to obtain a high biofilm thickness, (iii) a strong shear stress applied during the biofilm growth leads to a reduction of the biofilm thickness and to a consolidation of the biofilm structure. Overall, this model represents a relevant decision tool for the selection of appropriate enzymatic treatments in the context of negative biofilm control. From our results, it appears that protease based treatments should be more appropriate for biofilms developed under low COD/N ratios (about 20 gCOD/gN) whereas both glucosidases and proteases based treatments should be more appropriate for biofilms developed under high COD/N ratio (about 70 gCOD/gN). In addition, the model could be useful for other applications such as resource recovery in biofilms or granules, and help to better understand biological membrane fouling.
Assuntos
Biofilmes , Polissacarídeos , Proteínas , Simulação por Computador , Estresse MecânicoRESUMO
An innovative foam-based method for Fenton reagents (FR) and bacteria delivery was assessed for the in situ remediation of a petroleum hydrocarbon-contaminated unsaturated zone. The surfactant foam was first injected, then reagent solutions were delivered and propagated through the network of foam lamellae with a piston-like effect. Bench-scale experiments demonstrated the feasibility of the various treatments with hydrocarbon (HC) removal efficiencies as high as 96 %. Compared to the direct injection of FR solutions, the foam-based method led to larger radii of influence and more isotropic reagents delivery, whereas it did not show any detrimental effect regarding HC oxidation. Despite 25 % of HCs were expelled from the treated zone because of high foam viscosity, average degradation rates were increased by 20 %. At field-scale, foam and reagent solutions injections in soil were tracked both using visual observation and differential electric resistivity tomography. The latter demonstrated the controlled delivery of the reactive solutions using the foam-based method. Even if the foam-based method duration is about 5-times longer than the direct injection of amendment solutions, it provides important benefits, such as the confinement of harmful volatile hydrocarbons during Fenton treatments, the enhanced reagents delivery and the 30 % lower consumption of the latter.
Assuntos
Petróleo , Poluentes do Solo , Biodegradação Ambiental , Hidrocarbonetos , Solo , Poluentes do Solo/análise , TensoativosRESUMO
The scientific community has recognized that almost 99% of the microbial life on earth is represented by biofilms. Considering the impacts of their sessile lifestyle on both natural and human activities, extensive experimental activity has been carried out to understand how biofilms grow and interact with the environment. Many mathematical models have also been developed to simulate and elucidate the main processes characterizing the biofilm growth. Two main mathematical approaches for biomass representation can be distinguished: continuum and discrete. This review is aimed at exploring the main characteristics of each approach. Continuum models can simulate the biofilm processes in a quantitative and deterministic way. However, they require a multidimensional formulation to take into account the biofilm spatial heterogeneity, which makes the models quite complicated, requiring significant computational effort. Discrete models are more recent and can represent the typical multidimensional structural heterogeneity of biofilm reflecting the experimental expectations, but they generate computational results including elements of randomness and introduce stochastic effects into the solutions.
Assuntos
Biofilmes/crescimento & desenvolvimento , Modelos Biológicos , Biofilmes/efeitos dos fármacos , Biomassa , Biologia Computacional , Simulação por Computador , Resistência Microbiana a Medicamentos , Humanos , Conceitos Matemáticos , Interações Microbianas , Dinâmica não Linear , Percepção de Quorum , Análise de SistemasRESUMO
This study aimed to characterize biofilms from the paper industry and evaluate the effectiveness of enzymatic treatments in reducing them. The extracellular polymeric substances (EPS) extracted from six industrial biofilms were studied. EPS were mainly proteins, the protein to polysaccharide ratio ranging from 1.3 to 8.6 depending on where the sampling point was situated in the paper making process. Eight hydrolytic enzymes were screened on a 24-h multi-species biofilm. The enzymes were tested at various concentrations and contact durations. Glycosidases and lipases were inefficient or only slightly efficient for biofilm reduction, while proteases were more efficient: after treatment for 24 h with pepsin, Alcalase® or Savinase®, the removal exceeded 80%. Savinase® appeared to be the most adequate for industrial conditions and was tested on an industrial biofilm sample. This enzyme led to a significant release of proteins from the EPS matrix, indicating its potential efficiency on an industrial scale.