Challenges encountered in the transfer of atorvastatin tablet manufacturing - commercial batch-based production as a basis for small-scale continuous tablet manufacturing tests.

As is the case with batch-based tableting processes, continuous tablet manufacturing can be conducted by direct compression or with a granulation step such as dry or wet granulation included in the production procedure. In this work, continuous manufacturing tests were performed with a commercial tablet formulation, while maintaining its original material composition. Challenges were encountered with the feeding performance of the API during initial tests which required designing different powder pre-blend compositions. After the pre-blend optimization phase, granules were prepared with a roller compactor. Tableting was conducted with the granules and an additional brief continuous direct compression run was completed with some ungranulated mixture. The tablets were assessed with off-line tests, applying the quality requirements demanded for the batch-manufactured product. Chemical maps were obtained by Raman mapping and elemental maps by scanning electron microscopy with energy-dispersive X-ray spectroscopy. Large variations in both tablet weights and breaking forces were observed in all tested samples, resulting in significant quality complications. It was suspected that the API tended to adhere to the process equipment, accounting for the low API content in the powder mixture and tablets. These results suggest that this API or the tablet composition was unsuitable for manufacturing in a continuous line; further testing could be continued with different materials and changes in the process.

3D Raman mapping as an analytical tool for investigating the coatings of coated drug particles.

The properties of dry-coated paracetamol particles (fast-dissolving model drug) with carnauba wax particles as the coating agent (dissolution retardant) were investigated. Raman mapping technique was used to non-destructively examine the thickness and homogeneity of coated particles. The results showed that the wax existed in two forms on the surface of the paracetamol particles, forming a porous coating layer: i) whole wax particles on the surface of paracetamol and glued together with other wax surface particles, and ii) deformed wax particles spread on the surface. Regardless of the final particle size fraction (between 100 and 800 µm), the coating thickness had high variability, with average thickness of 5.9 ± 4.2 µm. The ability of carnauba wax to decrease the dissolution rate of paracetamol was confirmed by dissolution of powder and tablet formulations. The dissolution was slower for larger coated particles. Tableting further reduced the dissolution rate, clearly indicating the impact of subsequent formulation processes on the final quality of the product.

Investigation of tadalafil molecular arrangement in solid dispersions using inverse gas chromatography and Raman mapping.

The aim of this study was to investigate the molecular structures of tadalafil solid dispersions prepared by different techniques and further to relate them to surface free energy information indicating the final amorphousness of the product. Thus, we tried to complement the existing knowledge of solid dispersion formation. Poorly water-soluble tadalafil was combined with different polymers, i.e. Kollidon® 12 PF, Kollidon® VA 64 and Soluplus®, to form model systems. To assess the extent of drug-polymer miscibility, we studied model solid dispersion surface energy using inverse gas chromatography and phase micro-structure using confocal Raman microscopy. The selection of the preparation method was found to play a crucial role in the molecular arrangement of the incorporated drug and the polymer in resulting solid dispersion. Our results showed that a lower surface free energy indicated the formation of a more homogeneous solid dispersion. Conversely, a higher surface free energy corresponded to the heterogeneous systems containing tadalafil amorphous clusters that were captured by Raman mapping. Thus, we successfully introduced a novel evaluation approach of the drug molecular arrangement in solid dispersions that is especially useful for examining the miscibility of the components when the conventional characterizing techniques are inconclusive or yield variable results.

Application of reverse engineering in the field of pharmaceutical tablets using Raman mapping and chemometrics.

Raman micro-spectroscopy technique offers a combination of relatively high spatial resolution with identification of components or mixtures of components in different sample areas, e.g. on the surface or the cross-section of a sample. This study is focused on the analysis of the tablets from pharmaceutical development with different technological parameters: (1) the manufacturing technology, (2) the particle size of the input API (active pharmaceutical ingredient) and (3) the quantitative composition of the individual excipients. These three mentioned parameters represent the most frequently solved problems in the field of reverse engineering in pharmacy. The investigation aims to distinguish tablets with the above-described technological parameters with limited subjective steps by Raman microscopy. Furthermore, non-subjective methods of Raman data analysis using advanced statistical analysis have been proposed, namely Principal Component Analysis, Soft Independent Modelling of Class Analogy and Linear Discriminant Analysis. The methods successfully distinguished and identified even very small differences in the analysed tablets within our study and provided objective statistic evaluation of Raman maps. The information on component and particle size distribution including their small differences, which is the critical parameter in the development of the original and generic products, was obtained due to combination of these methods. Even though each of these chemometric methods evaluates the data set from a different perspective, their mutual application on the problem of Raman maps evaluation confirmed and specified results on level that would be unattainable with the use of only one them.

Comparison of genuine, generic and counterfeit Cialis tablets using vibrational spectroscopy and statistical methods.

The dubious online market in phosphodiesterase type 5 inhibitors is growing on a global scale. Counterfeit medical products can represent health issues for the user and cause medical mistrust. Within this work, genuine Cialis containing the active pharmaceutical ingredient (API) tadalafil, its generics available in the Czech Republic and the Cialis tablets from questionable online pharmacies were analysed. The methods of infra-red and Raman spectroscopy were used for the identification of the counterfeit tablets and for the verification of their API and excipients. All 9 tablets from online pharmacies were counterfeit with 2 of them even containing a different API (sildenafil, vardenafil). In addition, Raman mapping was used to determine the API and excipients' distribution and, in combination with multivariate data analysis, to separate similar tablets in clusters and to identify the outliers. Scanning electron microscopy of the samples revealed that the process of a wet granulation of micronized API was used during the formulation of the tablets. This comprehensive approach of analysis can be used for advanced exploration of the dubious samples of various medical products.

Determination of acid dissociation constants, enthalpy, entropy and Gibbs free energy of the baricitinib by the UV-metric and pH-metric analysis.

Baricitinib is a drug used for the treatment of rheumatoid arthritis. It is a selective and reversible inhibitor of Janus kinases 1 and 2, which play an important role in signalling the pro-inflammatory pathway activated in autoimmune disorders such as rheumatoid arthritis. The pH-spectrophotometric and pH-potentiometric titrations allowed the measurement of three or four successive dissociation constants of Baricitinib. Baricitinib neutral LH2 molecule was able to protonate into two soluble cations LH42+, LH3+ and dissociate into two soluble anions LH- and L2- in pure water. The graph of molar absorption coefficients of differently protonated species versus wavelength indicated that the spectra εL, εLH, εLH2 were the nearly the same for these species and that the spectra εLH4 and εLH3 were also similar. In the pH range from 2-13, four pKa´s of spectra analysis were reliably estimated by REACTLAB at I =0.0020 mol. dm-3 values pKTa1 = 3.07, pKTa2 = 3.87, pKTa3 = 6.27, pKTa4 = 12.78 at 25 °C and pKTa1 = 3.00, pKTa2 = 3.79, pKTa3 = 6.12, pKTa4 = 12.75 at 37 °C. Potentiometric pH-titration analysis for a higher concentration of 1 × 10-3 mol. dm-3 estimated with ESAB at I =0.0001 mol. dm-3 values pKTa1 = 3.69, pKTa2 = 3.81, pKTa3 = 4.73 at 25 °C and pKTa1 = 3.62, pKTa2 = 3.73, pKTa3 = 4.43 at 37 °C. Molar enthalpy ΔH°, molar entropy ΔS° and Gibbs free energy ΔG° were calculated from the spectra using a dependence ln K to 1/T.

Investigation of tablet disintegration pathways by the combined use of magnetic resonance imaging, texture analysis and static light scattering.

Efficient tablet disintegration is a pre-requisite for fast and complete drug dissolution from immediate release formulations. While the overall tablet disintegration time is a routinely measured quality attribute of pharmaceutical products, little attention is usually paid to the analysis of disintegration fragments and the cascade of elementary steps that lead to their formation. In this work, we investigate the disintegration pathways of directly compressed tablets by a unique combination of three methods: (i) magnetic resonance imaging (MRI), to gain insight into structural changes of tablets during disintegration; (ii) texture analysis, to measure the disintegration kinetics; and (iii) static light scattering, to characterise the size distribution of disintegration fragments. By systematically varying the tablet composition (50-90% of ibuprofen as a model active ingredient, 0-4% of croscarmellose sodium disintegrant, 6-50% of lactose monohydrate filler), a relationship between the tablet formulation, the size distribution of the disintegration fragments and the dissolution rate of the active ingredient has been established. To interpret the experimental observations, we analyse the disintegration fragments by Raman mapping and relate their composition and structure to the micro-scale arrangement of individual formulation components inside the tablet.

New designed special cells for Raman mapping of the disintegration process of pharmaceutical tablets.

The goal of this study was the methodological development of Raman microscopy application for advanced and reliable monitoring of pharmaceutical tablets disintegration in aqueous media. First step of the development involved new design and testing of static, flow cell and tablet holders. On-line Raman mapping method enables observation of the tested tablet interphase changes, particularly the changes of tablet composition during interaction of the solid-state drug form with disintegration medium. Furthermore, the quantitative information of tablet components (% w/w) from Raman maps was calculated. Second part of this study performs off-line Raman mapping, which was focused on the mapping of disintegrated tablet residua. Time-dependent Raman chemical maps provide an understanding of the role of several synergic processes, e.g. solvation, solvent penetration, both active pharmaceutical ingredient and excipient dissolution etc., which occur simultaneously on the surface of dissolving tablet. Raman data of disintegration process were evaluated by a chemometric method - Principal Component Analysis (PCA).

Multiwavelength UV-metric and pH-metric determination of the multiple dissociation constants of the lesinurad.

Potentiometric and spectrophotometric pH-titrations of the lesinurad for three consecutive dissociation constants determination were compared. Lesinurad is a selective inhibitor of uric acid reabsorption as part of a combination of medicines to treat high levels of uric acid in blood, also called hyperuricemia. Nonlinear regression of the pH-spectra with REACTLAB and SQUAD84 and of the pH-titration curve with ESAB determined three multiple close dissociation constants. The protonation scheme of lesinurad was suggested. A sparingly soluble anion L- of lesinurad was protonated to the still soluble species LH, LH2+ and LH32+ in pure water. Three consecutive thermodynamic dissociation constants were estimated pKTa1 = 2.09, pKTa2 = 4.25, pKTa3 = 6.58 at 25 °C and pKTa1 = 1.96, pKTa2 = 4.16, pKTa3 = 6.32 at 37 °C by UV-metric spectra analysis. The graph of molar absorption coefficients shows that the spectrum of species LH2+ and LH vary in colour, while protonation of chromophore LH2+ to LH32+ has less influence on chromophores in the lesinurad molecule. Three multiple thermodynamic dissociation constants of 1 × 10-4 M lesinurad were determined by the pH-metric analysis pKTa1 = 2.39, pKTa2 = 3.47, pKTa3 = 6.17 at 25 °C and pKTa1 = 2.08, pKTa2 = 3.29, pKTa3 = 6.03 at 37 °C. The values of enthalpy ΔH0(pKa1) = 19.19 kJ mol-1, ΔH0(pKa2) = 13.29 kJ mol-1, ΔH0(pKa3) = 38.39 kJ mol-1, show the dissociation process is endothermic. The positive values of ΔG0(pKa1) = 11.93 kJ mol-1, ΔG0(pKa2) = 24.26 kJ mol-1, ΔG0(pKa3) = 37.56 kJ mol-1 at 25 °C indicate that the dissociation process of pKa2 is not spontaneous, which was confirmed by its value of entropy ΔS0(pKa1) = 24.37 J mol-1, ΔS0(pKa2) = -36.79 J mol-1, ΔS0(pKa3) = 2.79 J mol-1. Three macro-dissociation constants of lesinurad and protonation locations were predicted by MARVIN and ACD/Percepta.

The Combined Use of Imaging Approaches to Assess Drug Release from Multicomponent Solid Dispersions.

PURPOSE: Imaging methods were used as tools to provide an understanding of phenomena that occur during dissolution experiments, and ultimately to select the best ratio of two polymers in a matrix in terms of enhancement of the dissolution rate and prevention of crystallization during dissolution. METHODS: Magnetic resonance imaging, ATR-FTIR spectroscopic imaging and Raman mapping have been used to study the release mechanism of a poorly water soluble drug, aprepitant, from multicomponent amorphous solid dispersions. Solid dispersions were prepared based on the combination of two selected polymers - Soluplus, as a solubilizer, and PVP, as a dissolution enhancer. Formulations were prepared in a ratio of Soluplus:PVP 1:10, 1:5, 1:3, and 1:1, in order to obtain favorable properties of the polymer carrier. RESULTS: The crystallization of aprepitant during dissolution has occurred to a varying degree in the polymer ratios 1:10, 1:5, and 1:3, but the increasing presence of Soluplus in the formulation delayed the onset of crystallization. The Soluplus:PVP 1:1 solid dispersion proved to be the best matrix studied, combining the abilities of both polymers in a synergistic manner. CONCLUSIONS: Aprepitant dissolution rate has been significantly enhanced. This study highlights the benefits of combining imaging methods in order to understand the release process.

Synthesis and Characterization of New 3-(4-Arylpiperazin-1-yl)-2-hydroxypropyl 4-Propoxybenzoates and Their Hydrochloride Salts.

Five new 3-(4-arylpiperazin-1-yl)-2-hydroxypropyl 4-propoxybenzoates were designed and synthesized as potential dual antihypertensive agents. The compounds were prepared as free bases and subsequently transformed to hydrochloride salts. The position of protonation of nitrogen atoms in the piperazine ring of hydrochloride salts was determined by means of (13)C-CP/MAS and (15)N-CP/MAS NMR and IR spectroscopy. Using these solid-state analytical techniques, it was found that both nitrogen atoms were protonated when excess hydrogen chloride was used for preparation of salts. On the other hand, when the equimolar amount of hydrogen chloride was used, piperazine nitrogen substituted by aryl was protonated.

A novel approach for HPLC determination of 2-cynaoacetamide using derivatization procedure with 2-hydroxyacetophenone as a new useful derivatization reagent.

A novel and sensitive derivatization procedure for the determination of 2-cynaoacetamide in pharmaceutical samples using liquid chromatography with the fluorescence detection was discovered. The method is based on derivatization of 2-cynaoacetamide using 2-hydroxyacetophenone as a new derivatization reagent. The product of derivatization reaction was isolated and characterized using spectroscopic techniques namely LC-MS, NMR and IR. The structure of 2-cyanoacetamide derivative was unambiguously assigned as a 2-amino-4-phenylfuran-3-carboxamide. Two derivatization systems were optimized in terms of reaction temperature, reaction time, pH and concentration of 2-hydroxyacetophenone, and a new pre- and post-derivatization HPLC methods were developed. The separations on HPLC with pre-column derivatization were accomplished using stationary phase based on a XBridge C18 column (100×4.6, 3.5µm) and isocratic elution using the mobile phase acetonitrile - 0.1% formic acid (30:70, v/v). The separations on the HPLC with post-column derivatization were performed on stationary phase on a TSKgel Amide-80 column (150×4.6mm, 3µm). The mobile phase was a mixture of acetonitrile, methanol and 10mM sodium formate buffer at pH=4.5 in ratio 3:2:95 (v/v). Both HPLC methods were fully validated in terms of linearity, sensitivity (limit of detection and limit of quantification), accuracy and precision according to ICH guidelines. The pre-column derivatization method was linear in the range 1.1-2000µg/l with method accuracy≥98.2% and method precision RSD≤4.8%. The post-column derivatization method was linear in the range 12-2000µg/l. Method accuracy≥96.3% and method precision RSD≤3.5%. Proposed new methods were proved to be highly sensitive, simple and rapid, and were successfully applied to the determinations of 2-cynaoacetamide in pregabalin.

The dissociation constants of the cytostatic bosutinib by nonlinear least-squares regression of multiwavelength spectrophotometric and potentiometric pH-titration data.

Potentiometric and spectrophotometric pH-titration of the multiprotic cytostatics bosutinib for dissociation constants determination were compared. Bosutinib treats patients with positive chronic myeloid leukemia. Bosutinib exhibits four protonatable sites in a pH range from 2 to 11, where two pK are well separated (ΔpK>3), while the other two are near dissociation constants. In the neutral medium, bosutinib occurs in the slightly water soluble form LH that can be protonated to the soluble cation LH4(3+). The molecule LH can be dissociated to still difficultly soluble anion L(-). The set of spectra upon pH from 2 to 11 in the 239.3-375.0nm was divided into two absorption bands: the first one from 239.3 to 290.5nm and the second from 312.3 to 375.0nm, which differ in sensitivity of chromophores to a pH change. Estimates of pK of the entire set of spectra were compared with those of both absorption bands. Due to limited solubility of bosutinib the protonation in a mixed aqueous-methanolic medium was studied. In low methanol content of 3-6% three dissociation constants can be reliably determined with SPECFIT/32 and SQUAD(84) and after extrapolation to zero content of methanol they lead to pKc1=3.43(12), pKc2=4.54(10), pKc3=7.56(07) and pKc4=11.04(05) at 25°C and pKc1=3.44(06), pKc2=5.03(08) pKc3=7.33(05) and pKc4=10.92(06) at 37°C. With an increasing content of methanol in solvent the dissociation of bosutinib is suppressed and the percentage of LH3(2+) decreases and LH prevails. From the potentiometric pH-titration at 25°C the concentration dissociation constants were estimated with ESAB pKc1=3.51(02), pKc2=4.37(02), pKc3=7.97(02) and pKc4=11.05(03) and with HYPERQUAD: pKc1=3.29(12), pKc2=4.24(10), pKc3=7.95(07) and pKc4=11.29(05).

A STUDY OF COMPRESSION PROCESS AND PROPERTIES OF TABLETS WITH MICROCRYSTALLINE CELLULOSE AND COLLOIDAL SILICON DIOXIDE.

This paper compares the compressibility and properties of tablets from Prosolv SMCC 90 and a mixture of Avicel PH-102 and colloidal silicon dioxide with a different specific surface. The effect of an addition of the lubricant magnesium stearate on these parameters under varying conditions of mixing and the homogeneity of the lubricant in the mixtures are also examined. Compressibility is evaluated by means of the energy balance of the compression process; the examined properties of tablets are tensile strength and disintegration time. The total energy of compression was increased with compression force, the highest being in Prosolv SMCC 90. Its values did not differ for differing conditions of mixing with the lubricant. Plasticity was slightly decreased with compression force and in the mixture with magnesium stearate it was not influenced by the conditions of mixing. Tablets made from Prosolv SMCC 90 and Avicel PH-102 were stronger than those from the mixtures from Avicel PH-102 and both types of Aerosil. The addition of magnesium stearate markedly decreased the strength of tablets from Avicel PH-102. An increase in the period and frequency of mixing with the lubricant resulted in a further decrease in strength. Disintegration time was longer in tablets from Avicel PH-102 and Prosolv SMCC 90, and it was further prolonged by an addition of magnesium stearate.

New approach of validation using internal normalization technique for quantification of related substances in raw material, intermediates and pharmaceutical substances by HPLC.

Internal normalization (IN) serves as a quantitative tool in gas chromatography. Nevertheless, its utilization in liquid chromatography is not widely employed, as several requirements need to be taken into account. However, IN can be used in case of relative amounts estimation when the absolute concentration is not the crucial factor. This suits very well in pharmaceutical analysis when the relative amount of active pharmaceutical ingredient (API) impurities is to be estimated with a limited knowledge of statistics, such as t-test and linear regression. The determination of three prasugrel impurities in the real sample by means of IN and the comparison of these results with external standard calibration was presented. The IN method was validated by test of population means and variances agreement and the agreement of external calibration and IN was performed by Student t-test. The influence of impurities concentration above and below is also discussed as well as the validation parameters, LOD and LOQ. It was found that the results achieved by external calibration and IN are statistically the same and, therefore, IN is a proper method for relative amount estimation of API impurities.

The study of naphthoquinones and their complexes with DNA by using Raman spectroscopy and surface enhanced Raman spectroscopy: new insight into interactions of DNA with plant secondary metabolites.

Naphthoquinones represent the group of plant secondary metabolites with cytotoxic properties based on their ability to generate reactive oxygen species and interfere with the processes of cell respiration. Due to this fact, the possible cytotoxic mechanisms on cellular and subcellular levels are investigated intensively. There are many targets of cytotoxic action on the cellular level; however, DNA is a critical target of many cytotoxic compounds. Due to the cytotoxic properties of naphthoquinones, it is necessary to study the processes of naphthoquinones, DNA interactions (1,4-naphthoquinone, binapthoquinone, juglone, lawsone, plumbagin), especially by using modern analytical techniques. In our work, the Raman spectroscopy was used to determine the possible binding sites of the naphthoquinones on the DNA and to characterize the bond of naphthoquinone to DNA. Experimental data reveals the relationships between the perturbations of structure-sensitive Raman bands and the types of the naphthoquinones involved. The modification of DNA by the studied naphthoquinones leads to the nonspecific interaction, which causes the transition of B-DNA into A-DNA conformation. The change of the B-conformation of DNA for all measured DNA modified by naphthoquinones except plumbagin is obvious.

Identification, characterization, synthesis and HPLC quantification of new process-related impurities and degradation products in retigabine.

Two new impurities were described and determined using gradient HPLC method with UV detection in retigabine (RET). Using LC-HRMS, NMR and IR analysis the impurities were identified as RET-dimer I: diethyl {4,4'-diamino-6,6'-bis[(4-fluorobenzyl)amino]biphenyl-3,3'-diyl}biscarbamate and RET-dimer II: ethyl {2-amino-5-[{2-amino-4-[(4-fluorobenzyl) amino] phenyl} (ethoxycarbonyl) amino]-4-[(4-fluorobenzyl)amino] phenyl}carbamate. Reference standards of these impurities were synthesized followed by semipreparative HPLC purification. The mechanism of the formation of these impurities is also discussed. An HPLC method was optimized in order to separate, selectively detect and quantify all process-related impurities and degradation products of RET. The presented method, which was validated in terms of linearity, limit of detection (LOD), limit of quantification (LOQ) and selectivity is very quick (less than 11min including re-equilibration time) and therefore highly suitable for routine analysis of RET related substances as well as stability studies.

A study of micronized poloxamers as lubricants in direct compression of tablets.

The study evaluates the micronized poloxamers Lptrol micro127 (poloxamer 407) and Lptrol micro 68 (poloxamer 188) as lubricants in combination with the dry binders microcrystalline cellulose and spray-dried lactose. Magnesium stearate was employed as the comparative lubricant. The parameters under study included energy for friction, plasticity, ejection force, tensile strength of tablets, and disintegration time of tablets. The factors of influence were the concentration of lubricants, compression force, and mixing parameters. The lubricating effect of micronized poloxamers was smaller than that of magnesium stearate. Higher concentrations of poloxamers decreased the tensile strength of tablets from microcrystalline cellulose, shortened the disintegration time, and slightly prolonged the disintegration time in the case of spray-dried lactose. Parameters of mixing of dry binders with poloxamers influenced the tested parameters of compression more in the case of spray-dried lactose. In microcrystalline cellulose, they influenced more the tensile strength and disintegration time of tablets.

Identification, preparation and UHPLC determination of process-related impurity in zolmitriptan.

A new impurity was detected and determined using gradient ion-pair UHPLC method with UV detection in zolmitriptan (ZOL). Using MS, NMR and IR study the impurity was identified as (4S,4'S)-4,4'-(2,2'-(4-(dimethylamino)butane-1,1-diyl)bis(3-(2-(dimethylamino) ethyl)-1H-indole-5,2-diyl))bis(methylene)di(oxazolidin-2-one) (ZOL-dimer). The standard of ZOL-dimer was consequently prepared via organic synthesis followed by semipreparative HPLC purification. The UHPLC method was optimized in order to selectively detect and quantify other known and unknown process-related impurities and degradation products of ZOL as well. The presented method which was validated with respect to linearity, accuracy, precision and selectivity has an advantage of a very quick UHPLC chromatographic separation (less than 7 min including re-equilibration time) and therefore is highly suitable for routine analysis of related substances and stability studies of ZOL.

Crystallization products of risedronate with carbohydrates and their substituted derivatives.

The gastrointestinal absorption of bisphosphonates is in general only about 1%. To address this problem mixtures of risedronate monosodium salt with twelve varied sugar alcohols, furanoses, pyranoses and eight gluco-, manno- and galactopyranoside derivatives as counterions were designed in an effort to prepare co-crystals/new entities with improved intestinal absorption. Crystalline forms were generated by means of kinetically and/or thermodynamically controlled crystallization processes. One hundred and fifty-two prepared samples were screened by means of FT-NIR and FT-Raman spectroscopy. No co-crystal was prepared, but noteworthy results were obtained. A new solid phase of risedronate monosodium salt generated in the presence of phenyl-ß-d-galactopyranoside under thermodynamically controlled crystallization conditions was found and also characterized using solid state NMR spectroscopy, X-ray powder diffraction and differential scanning calorimetry. This new polymorph was named as form P. Interactions between risedronate monosodium salt and both carbohydrates were confirmed by means of molecular dynamics simulation. In the present study the relationships between the chemical structures of the studied compounds required for crystalline form change are discussed.