Rheological insights into 3D printing of drug products: Drug nanocrystal-poloxamer gels for semisolid extrusion.

The importance of ink rheology to the outcome of 3D printing is well recognized. However, rheological properties of printing inks containing drug nanocrystals have not been widely investigated. Therefore, the objective of this study was to establish a correlation between the composition of nanocrystal printing ink, the ink rheology, and the entire printing process. Indomethacin was used as a model poorly soluble drug to produce nanosuspensions with improved solubility properties through particle size reduction. The nanosuspensions were further developed into semisolid extrusion 3D printing inks with varying nanocrystal and poloxamer 407 concentrations. Nanocrystals were found to affect the rheological properties of the printing inks both by being less self-supporting and having higher yielding resistances. During printing, nozzle blockages occurred. Nevertheless, all inks were found to be printable. Finally, the rheological properties of the inks were successfully correlated with various printing and product properties. Overall, these experiments shed new light on the rheological properties of printing inks containing nanocrystals.

Nonclassical Crystallization and Core-Shell Structure Formation of Ibuprofen from Binary Solvent Solutions.

Liquid-liquidphase separation (LLPS) or dense liquid intermediates during the crystallization of pharmaceutical molecules is common; however, their role in alternative nucleation mechanisms is less understood. Herein, we report the formation of a dense liquid intermediate followed by a core-shell structure of ibuprofen crystals via nonclassical crystallization. The Raman and SAXS results of the dense phase uncover the molecular structural ordering and its role in nucleation. In addition to the dimer formation of ibuprofen, which is commonly observed in the solution phase, methyl group vibrations in the Raman spectra show intermolecular interactions similar to those in the solid phase. The SAXS data validate the cluster size differences in the supersaturated solution and dense phase. The focused-ion beam cut image shows the attachment of nanoparticles, and we proposed a possible mechanism for the transformation from the dense phase into a core-shell structure. The unstable phase or polycrystalline core and its subsequent dissolution from inside to outside or recrystallization by reversed crystal growth produces the core-shell structure. The LLPS intermediate followed by the core-shell structure and its dissolution enhancement unfold a new perspective of ibuprofen crystallization.

Nanoparticle-based oral formulation can surprise you with inferior in vivo absorption in humans.

Particle size reduction leads to an increase in the drug dissolution rate, which in turn can lead to a substantial increase in the bioavailability of a poorly soluble compound. To improve bioavailability, a practically insoluble investigational drug, ODM-106, was nanomilled and capsule formulations with three different drug amounts were prepared for the first-in-man study. Fast in vitro dissolution was achieved from all the capsules containing different amounts of drug nanoparticles but in the clinical study, surprisingly, low bioavailability was observed from the highest capsule strength (100 mg) in comparison to a lower strength (10 mg). In order to study further the discrepant in vitro-in vivo correlation (IVIVC), a discriminative dissolution method was developed. It was noticed that the degree of supersaturation increased significantly as the stabilizers' concentration within the dried nanoformulations was increased. Hypromellose provided a physical barrier between nanoparticles to prevent aggregation during drying. SLS on the other hand improved wettability and provided supersaturation. The drug load, nanoparticle/polymer/surfactant/filler ratios and selected drying step were discovered to be critical to the nanoformulations' performance. Aggregation of nanoparticles, in the absence of optimal stabilizer concentration, compromised dissolution due to decreased surface area. In conclusion, the early development of a discriminative dissolution method and cautious selection of the nanoparticle/polymer ratio before manufacturing clinical batches is recommended.

Olive oil and clove oil-based nanoemulsion for topical delivery of terbinafine hydrochloride: in vitro and ex vivo evaluation.

In this article, formulation studies for terbinafine hydrochloride nanoemulsions, prepared by high-energy ultrasonication technique, are described. Pseudo-ternary phase diagram was constructed in order to find out the optimal ratios of oil and surfactant/co-solvent mixture for nanoemulsion production. Clove and olive oils were selected as oil phase. Based on the droplet size evaluation, maximum nanoemulsion region were determined for formulation development. Further characterization included polydispersity index (PDI), zeta potential, Fourier transform infrared (FT-IR) spectroscopy, morphology, pH, viscosity, refractive index, ex vivo skin permeation, skin irritation, and histopathological examination. Droplet sizes of optimized formulations were in colloidal range. PDI values below 0.35 indicated considerably homogeneous nanoemulsions. Zeta potential values were from 13.2 to 18.1 mV indicating good stability, which was also confirmed by dispersion stability studies. Ex vivo permeation studies revealed almost total skin permeation of terbinafine hydrochloride from the nanoemulsions (96-98%) in 6 hours whereas commercial product reached only 57% permeation at the same time. Maximum drug amounts were seen in epidermis and dermis layers. Skin irritation and histopathological examination demonstrated dermatologically safe formulations. In conclusion, olive oil and clove oil-based nanoemulsion systems have potential to serve as promising carriers for topical terbinafine hydrochloride delivery.

Nonresonant CARS Imaging of Porous and Solid Silicon Nanoparticles in Human Cells.

Coherent anti-Stokes Raman scattering (CARS), a nonlinear optical method for rapid visualization of biological objects, represents a progressive tool in biology and medicine to explore cells and tissue structures in living systems and biopsies. In this study, we report efficient nonresonant CARS imaging of silicon nanoparticles (SiNPs) in human cells as a proof of concept. As both bulk and porous silicon exhibit a high third-order nonlinear susceptibility, χ(3), which is responsible for the CARS intensity, it is possible to visualize the SiNPs without specific labels. Porous and solid SiNPs were obtained from layers of porous and nonporous silicon nanowires and mesoporous silicon. Electron microscopy and Raman spectroscopy showed that porous SiNPs consisted of ∼3 nm silicon nanocrystals (nc-Si) and pores, whereas solid nanoparticles comprised ∼30 nm nc-Si. All types of SiNPs were nontoxic at concentrations up to 500 µg/mL after 24 h of incubation with cells. We demonstrated that although nc-Si possesses a distinguished narrow Raman band of about 520 cm-1, it is possible to detect a high CARS signal from SiNPs in the epi-direction even in a nonresonant regime. 3D CARS images showed that all types of studied SiNPs were visualized as bright spots inside the cytoplasm of cells after 3-6 h of incubation because of the contrast provided by the high third-order nonlinear susceptibility of SiNPs, which is 1 × 104 to 1 × 105 times higher than that of water and typical biological media. Overall, CARS microscopy can provide localization of SiNPs within biological structures at the cellular level and can be a powerful tool for in vitro monitoring of silicon-based drug delivery systems or use SiNPs as labels to monitor various bioprocesses inside living cells.

3D Printing of Drug Nanocrystals for Film Formulations.

The aim of the study was to prepare indomethacin nanocrystal-loaded, 3D-printed, fast-dissolving oral polymeric film formulations. Nanocrystals were produced by the wet pearl milling technique, and 3D printing was performed by the semi-solid extrusion method. Hydroxypropyl methyl cellulose (HPMC) was the film-forming polymer, and glycerol the plasticizer. In-depth physicochemical characterization was made, including solid-state determination, particle size and size deviation analysis, film appearance evaluation, determination of weight variation, thickness, folding endurance, drug content uniformity, and disintegration time, and drug release testing. In drug nanocrystal studies, three different stabilizers were tested. Poloxamer F68 produced the smallest and most homogeneous particles, with particle size values of 230 nm and PI values below 0.20, and was selected as a stabilizer for the drug-loaded film studies. In printing studies, the polymer concentration was first optimized with drug-free formulations. The best mechanical film properties were achieved for the films with HPMC concentrations of 2.85% (w/w) and 3.5% (w/w), and these two HPMC levels were selected for further drug-loaded film studies. Besides, in the drug-loaded film printing studies, three different drug levels were tested. With the optimum concentration, films were flexible and homogeneous, disintegrated in 1 to 2.5 min, and released the drug in 2-3 min. Drug nanocrystals remained in the nano size range in the polymer films, particle sizes being in all film formulations from 300 to 500 nm. When the 3D-printed polymer films were compared to traditional film-casted polymer films, the physicochemical behavior and pharmaceutical performance of the films were very similar. As a conclusion, 3D printing of drug nanocrystals in oral polymeric film formulations is a very promising option for the production of immediate-release improved- solubility formulations.

Combined Effect of the Preparation Method and Compression on the Physical Stability and Dissolution Behavior of Melt-Quenched Amorphous Celecoxib.

In an earlier investigation, amorphous celecoxib was shown to be sensitive to compression-induced destabilization. This was established by evaluating the physical stability of uncompressed/compressed phases in the supercooled state (Be̅rzins . Mol. Pharmaceutics, 2019, 16(8), 3678-3686). In this study, we investigated the ramifications of compression-induced destabilization in the glassy state as well as the impact of compression on the dissolution behavior. Slow and fast melt-quenched celecoxib disks were compressed with a range of compression pressures (125-500 MPa) and dwell times (0-60 s). These were then monitored for crystallization using low-frequency Raman spectroscopy when kept under dry (∼20 °C; <5% RH) and humid (∼20 °C; 97% RH) storage conditions. Faster crystallization was observed from the samples, which were compressed using more severe compression parameters. Furthermore, crystallization was also affected by the cooling rate used to form the amorphous phases; slow melt-quenched samples exhibited higher sensitivity to compression-induced destabilization. The behavior of the melt-quench disks, subjected to different compression conditions, was continuously monitored during dissolution using low-frequency Raman and UV/vis for the solid-state form and dissolution properties, respectively. Surprisingly the compressed samples exhibited higher apparent dissolution (i.e., higher area under the dissolution curve and initial celecoxib concentration in solution) than the uncompressed samples; however, this is attributed to biaxial fracturing throughout the compressed compacts yielding a greater effective surface area. Differences between the slow and fast melt quenched samples showed some trends similar to those observed for their storage stability.

Short-Stability Study of Rifaximin-Based Samples.

BACKGROUND: Rifaximin is an oral antimicrobial with a daily dose ranging from 600 to 800 mg. It is classified as Class IV in the Biopharmaceutic Classification System. Thus, rifaximin-based samples were developed by complexation to ß-cyclodextrin using a phase solubility diagram, and malaxation and decreasing particle size using wet milling. OBJECTIVE: Concomitant to the pharmaceutical technology, a stability studywas undertaken with the objective of verifying the integrity of the drug. METHODS: The stability of the new samples were studied for 6 months, without interruption, under controlled conditions of temperature and humidity in a climatic chamber. They were analyzed simultaneously by HPLC and microbiological turbidimetry at zero, 3, and 6 months. RESULTS: Two of the samples follow second reaction order and one follows zero reaction order. Microbiological analysis proved to be important in assessing the potency of rifaximin in one of the samples, and its results were more consistent than the results by HPLC. CONCLUSIONS: The rifaximin-based samples were stable under controlled temperature and humidity conditions and the physical-chemical and microbiological methods were able to evaluate their behavior during the 6-month study. HIGHLIGHTS: It is worth considering the development of these products, since the design process of formulation and pharmaceutical technology is financially more attractive than the development of new drugs that require high levels of investment in research and development, innovation of public policies, and regulatory actions.

Production of Itraconazole Nanocrystal-Based Polymeric Film Formulations for Immediate Drug Release.

In order to improve the solubility properties of BCS class II drug itraconazole, fast dissolving oral polymeric film formulations based on itraconazole nanocrystals were produced. Drug nanocrystals were manufactured by the wet pearl milling technique. In polymeric film formulations, hydroxypropyl methyl cellulose (HPMC) was used as a film forming polymer, and glycerin was used as a plasticizer. For nanocrystal suspensions and film formulations, thorough physicochemical characterization was performed, including particle sizing and size deviation, film appearance, weight variation, thickness, folding endurance, drug content uniformity, disintegration time, and dissolution profile. After milling, the nanoparticles were 369 nm in size with a PI value of 0.20. Nanoparticles were stable and after redispersion from film formulations, the particle size remained almost the same (330 nm and PI 0.16). The produced films were flexible, homogeneous, fast disintegrating, and drug release rate from both the nanosuspension and film formulations showed immediate release behavior. Based on the study, the film casting method for production of itraconazole nanocrystal based immediate release formulations is a good option for improved solubility.

Nanosuspensions of a poorly soluble investigational molecule ODM-106: Impact of milling bead diameter and stabilizer concentration.

Aqueous solubility of a drug substance is an important attribute affecting oral bioavailability. Nanonization, particle size reduction to submicron level, is an elegant approach to improve drug solubility and dissolution by increasing the surface energy, which in turn necessitates the use of stabilizers. The purpose of this study was to develop a nanosuspension of a practically water-insoluble investigational molecule by nanomilling approach using wet media milling. A variety of polymeric and surface active excipients were tested for their wettability. A combination of hydroxypropyl methylcellulose and sodium lauryl sulfate (SLS) were selected as stabilizers on the bases of compatibility studies and efficient wettability behaviour in contact angle measurements (≈80˚). A factorial design set-up was used to study the effect of milling bead diameter and stabilizer concentration on the efficiency of particle size reduction. Nanonization outcome was different when milling beads of 0.5 mm and 1 mm diameter were used at different concentrations of the stabilizers, which demonstrated the complex nature of the whole system. Storage of the nanosuspensions under different temperature conditions resulted only in minor changes of the particle size fractions.

Degrees of order: A comparison of nanocrystal and amorphous solids for poorly soluble drugs.

Poor aqueous solubility is currently a prevalent issue in the development of small molecule pharmaceuticals. Several methods are possible for improving the solubility, dissolution rate and bioavailability of Biopharmaceutics Classification System (BCS) class II and class IV drugs. Two solid state approaches, which rely on reductions in order, and can theoretically be applied to all molecules without any specific chemical prerequisites (compared with e.g. ionizable or co-former groups, or sufficient lipophilicity), are the use of the amorphous form and nanocrystals. Research involving these two approaches is relatively extensive and commercial products are now available based on these technologies. Nevertheless, their formulation remains more challenging than with conventional dosage forms. This article describes these two technologies from both theoretical and practical perspectives by briefly discussing the physicochemical backgrounds behind these approaches, as well as the resulting practical implications, both positive and negative. Case studies demonstrating the benefits and challenges of these two techniques are presented.

Surface Stabilization and Dissolution Rate Improvement of Amorphous Compacts with Thin Polymer Coatings: Can We Have It All?

The distinction between surface and bulk crystallization of amorphous pharmaceuticals, as well as the importance of surface crystallization for pharmaceutical performance, is becoming increasingly evident. An emerging strategy in stabilizing the amorphous drug form is to utilize thin coatings at the surface. While the physical stability of systems coated with pharmaceutical polymers has recently been studied, the effect on dissolution performance as a function of storage time, as a further necessary step toward the success of these formulations, has not been previously studied. Furthermore, the effect of coating thickness has not been elucidated. This study investigated the effect of these polymer-coating parameters on the interplay between amorphous surface crystallization and drug dissolution for the first time. The study utilized simple tablet-like coated dosage forms, comprising a continuous amorphous drug core and thin polymer coating (hundreds of nanometers to a micrometer thick). Monitoring included analysis of both the solid-state of the model drug (with SEM, XRD, and ATR FTIR spectroscopy) and dissolution performance (and associated morphology and solid-state changes) after different storage times. Stabilization of the amorphous form (dependent on the coating thickness) and maintenance of early-stage intrinsic dissolution rates characteristic for the unaged amorphous drug were achieved. However, dissolution in the latter stages was likely inhibited by the presence of a polymer at the surface. Overall, this study introduced a versatile coated system for studying the dissolution of thin-coated amorphous dosage forms suitable for different drugs and coating agents. It demonstrated the importance of multiple factors that need to be taken into consideration when aiming to achieve both physical stability and improved release during the shelf life of amorphous formulations.

Utilization of green formulation technique and efficacy estimation on cell line studies for dual anticancer drug therapy with niosomes.

The aim of the present study was to prepare niosome formulations for the simultaneous encapsulation, dual drug therapy, of two anticancer drugs by the ecological probe sonication method. Poloxamer and sorbitan monostearate were used as surface active agents in niosomes, and the water soluble doxorubicin and poorly-water soluble paclitaxel were used as anticancer drugs. Thorough physicochemical analysis were performed for the niosomes, and their cytotoxicity and activity were evaluated on MCF-7 and PC3-MM2 cancer cell lines. Prepared niosomes were small in size with sizes ranging from 137 nm to 893 nm, and entrapment efficiencies were high, ranging from 91.24% to 99.99%. During the four weeks stability testing, the particle size remained stable. The niosomal formulations showed in vitro sustained drug release profiles for doxorubicin and clearly increased the dissolution rate of poorly water soluble paclitaxel. The incorporation of both the drugs into niosomes improved cell penetration and antiproliferative activity of the drugs PC3-MM2 cell lines. As a conclusion, doxorubicin and paclitaxel loaded niosome formulations resulted in relatively stable, small sized niosomes with improved drug release profiles, low toxicity, better cell penetration and antiproliferative activity. The niosomes showed synergistic effect due to the presence of both drugs, which can overcome multidrug resistance.

Submission of Rifaximin to Different Techniques: Characterization, Solubility Study, and Microbiological Evaluation.

Rifaximin, an oral antimicrobial drug, is marketed as 200-mg tablets. The daily dose ranges from 600 mg (1 tablet 3 times a day) to 800 mg (2 tablets twice a day). It is used for a wide range of ages, from adults to children, since it is indicated for the treatment of hepatic encephalopathy, travelers' diarrhea, irritable bowel syndrome, Clostridium difficile, ulcerative colitis, and acute diarrhea. The success of pharmacotherapy will depend on correct fulfillment of drug administration; however, it becomes difficult when the tablets are large and the doses are frequent. Rifaximin belongs to class IV according to the Biopharmaceutic Classification System (BCS), meaning that it is both poorly soluble and poorly permeable. Thus, in this study, solubility of rifaximin was improved by its complexation to ß-cyclodextrin by (i) phase solubility diagram, (ii) malaxation, and (iii) decreasing particle size by wet milling. Improved solubility provides lower doses and facilitates compliance with pharmacotherapy. The products formed were analyzed by spectrophotometry in the infrared region (FT-IR), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). Also, their solubility and microbiological activity were determined. The products obtained in all techniques were more soluble than the free drug; they presented higher thermal stability and antimicrobial potency was approximately 100% with all the formulations. It is important to highlight that the treatment failure not only affects the quality of life of the patients, but also contributes significantly to the economic burden of the health system. Therefore, these findings are extremely interesting, both from a technological and financial point of view.

Cell-Nanoparticle Interactions at (Sub)-Nanometer Resolution Analyzed by Electron Microscopy and Correlative Coherent Anti-Stokes Raman Scattering.

A wide variety of nanoparticles are playing an increasingly important role in drug delivery. Label-free imaging techniques are especially desirable to follow the cellular uptake and intracellular fate of nanoparticles. The combined correlative use of different techniques, each with unique advantages, facilitates more detailed investigation about such interactions. The synergistic use of correlative coherent anti-Stokes Raman scattering and electron microscopy (C-CARS-EM) imaging offers label-free, chemically-specific, and (sub)-nanometer spatial resolution for studying nanoparticle uptake into cells as demonstrated in the current study. Coherent anti-Stokes Raman scattering (CARS) microscopy offers chemically-specific (sub)micron spatial resolution imaging without fluorescent labels while transmission electron microscopy (TEM) offers (sub)-nanometer scale spatial resolution and thus visualization of precise nanoparticle localization at the sub-cellular level. This proof-of-concept imaging platform with unlabeled drug nanocrystals and macrophage cells revealed good colocalization between the CARS signal and electron dense nanocrystals in TEM images. The correlative TEM images revealed subcellular localization of nanocrystals inside membrane bound vesicles, showing multivesicular body (MVB)-like morphology typical for late endosomes (LEs), endolysosomes, and phagolysosomes. C-CARS-EM imaging has much potential to study the interactions between a wide range of nanoparticles and cells with high precision and confidence.

Understanding Dissolution and Crystallization with Imaging: A Surface Point of View.

The tendency for crystallization during storage and administration is the most considerable hurdle for poorly water-soluble drugs formulated in the amorphous form. There is a need to better detect often subtle and complex surface crystallization phenomena and understand their influence on the critical quality attribute of dissolution. In this study, the interplay between surface crystallization of the amorphous form during storage and dissolution testing, and its influence on dissolution behavior, is analyzed for the first time with multimodal nonlinear optical imaging (coherent anti-Stokes Raman scattering (CARS) and sum frequency generation (SFG)). Complementary analyses are provided with scanning electron microscopy, X-ray diffraction and infrared and Raman spectroscopies. Amorphous indomethacin tablets were prepared and subjected to two different storage conditions (30 °C/23% RH and 30 °C/75% RH) for various durations and then dissolution testing using a channel flow-through device. Trace levels of surface crystallinity previously imaged with nonlinear optics after 1 or 2 days of storage did not significantly decrease dissolution and supersaturation compared to the freshly prepared amorphous tablets while more extensive crystallization after longer storage times did. Multimodal nonlinear optical imaging of the tablet surfaces after 15 min of dissolution revealed complex crystallization behavior that was affected by both storage condition and time, with up to four crystalline polymorphs simultaneously observed. In addition to the well-known α- and γ-forms, the less reported metastable ε- and η-forms were also observed, with the ε-form being widely observed in samples that had retained significant surface amorphousness during storage. This form was also prepared in the pure form and further characterized. Overall, this study demonstrates the potential value of nonlinear optical imaging, together with more established solid-state analysis methods, to understand complex surface crystallization behavior and its influence on drug dissolution during the development of amorphous drugs and dosage forms.

High-Generation Amphiphilic Janus-Dendrimers as Stabilizing Agents for Drug Suspensions.

Pharmaceutical nanosuspensions are formed when drug crystals are suspended in aqueous media in the presence of stabilizers. This technology offers a convenient way to enhance the dissolution of poorly water-soluble drug compounds. The stabilizers exert their action through electrostatic or steric interactions, however, the molecular requirements of stabilizing agents have not been studied extensively. Here, four structurally related amphiphilic Janus-dendrimers were synthesized and screened to determine the roles of different macromolecular domains on the stabilization of drug crystals. Physical interaction and nanomilling experiments have substantiated that Janus-dendrimers with fourth generation hydrophilic dendrons were superior to third generation analogues and Poloxamer 188 in stabilizing indomethacin suspensions. Contact angle and surface plasmon resonance measurements support the hypothesis that Janus-dendrimers bind to indomethacin surfaces via hydrophobic interactions and that the number of hydrophobic alkyl tails determines the adsorption kinetics of the Janus-dendrimers. The results showed that amphiphilic Janus-dendrimers adsorb onto drug particles and thus can be used to provide steric stabilization against aggregation and recrystallization. The modular synthetic route for new amphiphilic Janus-dendrimers offers, thus, for the first time a versatile platform for stable general-use stabilizing agents of drug suspensions.

Design Space and QbD Approach for Production of Drug Nanocrystals by Wet Media Milling Techniques.

Drug nanocrystals are nanosized solid drug particles, the most important application of which is the improvement of solubility properties of poorly soluble drug materials. Drug nanocrystals can be produced by many different techniques, but the mostly used are different kinds of media milling techniques; in milling, particle size of bulk sized drug material is decreased, with the aid of milling beads, to nanometer scale. Utilization of Quality by Design, QbD, approach in nanomilling improves the process-understanding of the system, and recently, the number of studies using the QbD approach in nanomilling has increased. In the QbD approach, the quality is built into the products and processes throughout the whole production chain. Definition of Critical Quality Attributes, CQAs, determines the targeted final product properties. CQAs are confirmed by setting Critical Process Parameters, CPPs, which include both process parameters but also input variables, like stabilizer amount or the solid state form of the drug. Finally, Design Space determines the limits in which CPPs should be in order to reach CQAs. This review discusses the milling process and process variables, CPPs, their impact on product properties, CQAs and challenges of the QbD approach in nanomilling studies.

Practical guidelines for the characterization and quality control of pure drug nanoparticles and nano-cocrystals in the pharmaceutical industry.

The number of poorly soluble drug candidates is increasing, and this is also seen in the research interest towards drug nanoparticles and (nano-)cocrystals; improved solubility is the most important application of these nanosystems. In order to confirm the functionality of these nanoparticles throughout their lifecycle, repeatability of the formulation processes, functional performance of the formed systems in pre-determined way and system stability, a thorough physicochemical understanding with the aid of necessary analytical techniques is needed. Even very minor deviations in for example particle size or size deviation in nanoscale can alter the product bioavailability, and the effect is even more dramatic with the smallest particle size fractions. Also, small particle size sets special requirements for the analytical techniques. In this review most important physicochemical properties of drug nanocrystals and nano-cocrystals are presented, suitable analytical techniques, their pros and cons, are described with the extra input on practical point of view.

Drug nanocrystals - Versatile option for formulation of poorly soluble materials.

Poor solubility of drug compounds is a great issue in drug industry today and decreasing particle size is one efficient and simple way to overcome this challenge. Drug nanocrystals are solid nanosized drug particles, which are covered by a stabilizer layer. In nanoscale many physical properties, like compound solubility, are different from the solubility of bulk material, and due to this drug nanocrystals can reach supersaturation as compared to thermodynamic solubility. The most important effect of the smaller particle size is that dissolution rate is highly enhanced mainly due to the increased surface area. In this review the most important properties of nanocrystalline drug compounds are presented, with multiple examples of the development and characterization of nanocrystalline drug formulations.