A dual high-energy radiography platform with 15 µm resolution at the National Ignition Facility.

To study matter at extreme densities and pressures, we need mega laser facilities such as the National Ignition Facility as well as creative methods to make observations during timescales of a billionth of a second. To facilitate this, we developed a platform and diagnostic to characterize a new point-projection radiography configuration using two micro-wires irradiated by a short pulse laser system that provides a large field of view with up to 3.6 ns separation between images. We used tungsten-carbide solid spheres as reference objects and inferred characteristics of the back-lighter source using a forward-fitting algorithm. The resolution of the system is inferred to be 15 µm (using 12.5 µm diameter wires). The bremsstrahlung temperature of the source is 70-300 keV, depending on laser energy and coupling efficiency. By adding the images recorded on multiple stacked image plates, the signal-to-noise of the system is nearly doubled. The imaging characterization technique described here can be adapted to most point-projection platforms where the resolution, spectral contrast, and signal-to-noise are important.

Time-Resolved Fuel Density Profiles of the Stagnation Phase of Indirect-Drive Inertial Confinement Implosions.

The implosion efficiency in inertial confinement fusion depends on the degree of stagnated fuel compression, density uniformity, sphericity, and minimum residual kinetic energy achieved. Compton scattering-mediated 50-200 keV x-ray radiographs of indirect-drive cryogenic implosions at the National Ignition Facility capture the dynamic evolution of the fuel as it goes through peak compression, revealing low-mode 3D nonuniformities and thicker fuel with lower peak density than simulated. By differencing two radiographs taken at different times during the same implosion, we also measure the residual kinetic energy not transferred to the hot spot and quantify its impact on the implosion performance.

First Observation of Cross-Beam Energy Transfer Mitigation for Direct-Drive Inertial Confinement Fusion Implosions Using Wavelength Detuning at the National Ignition Facility.

Cross-beam energy transfer (CBET) results from two-beam energy exchange via seeded stimulated Brillouin scattering, which detrimentally reduces ablation pressure and implosion velocity in direct-drive inertial confinement fusion. Mitigating CBET is demonstrated for the first time in inertial-confinement implosions at the National Ignition Facility by detuning the laser-source wavelengths (±2.3 Å UV) of the interacting beams. We show that, in polar direct-drive, wavelength detuning increases the equatorial region velocity experimentally by 16% and alters the in-flight shell morphology. These experimental observations are consistent with design predictions of radiation-hydrodynamic simulations that indicate a 10% increase in the average ablation pressure.

Robustness of spatial-coherence multiplexing under receiver misalignment.

It has been shown previously that the spatial coherence of a source can be modulated and demodulated; hence it can be used as the basis for a new dimension of multiplexing in high-speed optical communication links. We address the sensitivity of such a system to misalignments of the receiver with respect to the beam and examine how changing transverse modes affect the spatial coherence in the lateral direction. Specifically, we show that such a system is surprisingly robust for both lateral offsets, in which the receiver is not properly aligned on the beam center, and rotational offsets, in which the receiver is tilted with respect to the plane of the spatial coherence modulation. The presence of higher-order transverse modes or changes in the transverse-mode structure are also shown to have little effect on the system operation.

Spatial-coherence modulation for optical interconnections.

The spatial coherence of a laser beam depends on the number and the relative weights of the spatial modes supported by the laser waveguide. By electro-optic modulation of the cavity geometry, the spatial-coherence function can be modulated between zero and one at predictable locations across the beam and thus carry information. A simple integrated-optic interferometer is used to decode the signal. Spatial coherence can be modulated independently of the beam intensity and can be used as another level of multiplexing in addition to amplitude modulation, wavelength-division modulation, etc. One can implement a free-space optical interconnection scheme by carrying data on the intensity and address information on the spatial coherence.