RESUMO
Ultracapacitors are promising candidates for alternative energy storage applications since they can store and deliver energy at relatively high rates. Here, we present hybrid nanocarbon ultracapacitor electrodes with a low equivalent series resistance (ESR) of 7 ohms. 1-pyrenebutyric acid treated large-area single layer graphene (SLG) sheets covered with shortened multi-walled carbon nanotubes (MWNTs) have been utilized as highly conductive and percolated networks of hybrid carbon nanomaterial composites or thin films as ultracapacitor electrodes. Uniform centimeter scale single layer graphene sheets were produced via low pressure chemical vapor deposition using copper foil substrates and then subsequently modified by 1-pyrenebutyric acid functionalization. Chemically shortened MWNTs ranging in length of 200-500 nm, were deposited by drop casting on 1-pyrenebutyric acid functionalized SLG films. SLG/MWNT nancomposite hybrid films of different thicknesses were obtained by controlling the density of MWNT suspension. Surface morphology and nanostructure of the hybrid nanocomposites indicated relatively dense and homogeneous web-like networks. Specific capacitance values of the hybrid electrodes were substantially increased by 200% compared to those ultracapacitors fabricated using buckypaper electrodes. Average values of specific capacitance and energy density obtained were 140.64 F/g and 21.54 Wh/kg respectively. SLG/MWNT nanocomposite electrodes are very promising for future ultracapacitor devices with their low ESR value that is 95% lower than that of buckypaper based ultracapacitors.
RESUMO
We investigated the data transmission performance of indium antimonide (InSb) nanowires synthesized on (100) type substrates using chemical vapor deposition and having diameters of 20 nm and below using the eye diagram approach of the transmission line. NW interconnect parameters including the bit error rate, quality factor, signal attenuation and maximum bandwidth have been extracted. Nanowires can sustain data rates of up to 10 mega bits per second (Mbps) without any impedance matching and de-embedding of the parasitic parameters coming from the measurement system, and the data rate is directly proportional to nanowire diameter.
RESUMO
We studied the photodesorption behavior of pristine and nitric acid (HNO(3)) treated graphene layers fabricated by chemical vapor deposition (CVD). The decrease in electrical conductivity and a negative shift of the Dirac point in graphene layers illuminated with ultraviolet light are caused by molecular photodesorption, while the UV illumination does not degrade the carrier mobility of graphene layers. When graphene layers were treated with concentrated HNO(3), the photodesorption-induced current decrease became less significant than for pristine graphene layers. We suggest this is due to the passivation of oxygen-bearing functionalities to CVD grown graphene structural defects by HNO(3) functionalization, which prevents the further absorption of gas molecules. Our results provide a new strategy for stabilizing the electrical performance of CVD grown large-area graphene layers for applications ranging from nanoelectronics to optoelectronics.
RESUMO
We describe the fabrication of highly sensitive graphene based field effect transistor (FET) biosensors with a cost-effective approach and their application in label-free Deoxyribonucleic acid (DNA) detection. Chemical vapor deposition (CVD) grown graphene layers were used to achieve mass production of FET devices via conventional photolithographic patterning. Non-covalent functionalization of the graphene layer with 1-Pyrenebutanoic acid succinimidyl ester ensures high conductivity and sensitivity of the FET device. The present device could reach a detection limit as low as 3 x 10(-9) M.
Assuntos
Técnicas Biossensoriais/métodos , DNA/análise , Grafite/química , Microscopia de Força Atômica , Nanotecnologia , Processos FotoquímicosRESUMO
Electrostatic properties of proteins are crucial for their functionality. Carboxyamides are small polar groups that, as peptide bonds, are principal structural components of proteins that govern their electrostatic properties. We investigated the medium dependence of the molar polarization and of the permanent dipole moments of amides with different state of alkylation. The experimentally measured and theoretically calculated dipole moments manifested a solvent dependence that increased with the increase in the media polarity. We ascribed the observed enhancement of the amide polarization to the reaction fields in the solvated cavities. Chloroform, for example, caused about a 25% increase in the amide dipole moments determined for vacuum, as the experimental and theoretical results demonstrated. Another chlorinated solvent, 1,1,2,2-tetrachloroethane, however, caused an "abnormal" increase in the experimentally measured amide dipoles, which the theoretical approaches we used could not readily quantify. We showed and discussed alternatives for addressing such discrepancies between theory and experiment.
Assuntos
Amidas/química , Modelos Teóricos , Proteínas/química , Etano/análogos & derivados , Etano/química , Hidrocarbonetos Clorados/química , Eletricidade EstáticaRESUMO
Graphene is a single sheet of carbon atoms with outstanding electrical and physical properties and is being exploited for applications in electronics, sensors, photovoltaics, and energy storage. A novel 3D architecture called a pillared graphene nanostructure (PGN) is a combination of two allotropes of carbon, including graphene and carbon nanotubes. A one-step chemical vapor deposition process for large-area PGN fabrication via a combination of surface catalysis and in situ vapor-liquid-solid mechanisms is described. A process by which PGN layers can be transferred onto arbitrary substrates while keeping the 3D architecture intact is also described. Single and multilayer stacked PGNs are envisioned for future ultralarge and tunable surface-area applications in hydrogen storage and supercapacitors.
Assuntos
Carbono/química , Grafite/química , Nanoestruturas/química , Nanotecnologia/métodos , Microscopia Eletrônica de Transmissão , Nanoestruturas/ultraestrutura , Nanotubos de Carbono/química , Nanotubos de Carbono/ultraestruturaRESUMO
In this work, the synthesis and characterization of three-dimensional hetergeneous graphene nanostructures (HGN) comprising continuous large-area graphene layers and ZnO nanostructures, fabricated via chemical vapor deposition, are reported. Characterization of large-area HGN demonstrates that it consists of 1-5 layers of graphene, and exhibits high optical transmittance and enhanced electrical conductivity. Electron microscopy investigation of the three-dimensional heterostructures shows that the morphology of ZnO nanostructures is highly dependent on the growth temperature. It is observed that ordered crystalline ZnO nanostructures are preferably grown along the <0001> direction. Ultraviolet spectroscopy and photoluminescence spectroscopy indicates that the CVD-grown HGN layers has excellent optical properties. A combination of electrical and optical properties of graphene and ZnO building blocks in ZnO-based HGN provides unique characteristics for opportunities in future optoelectronic devices.