Characterization and modeling of stable colloids of organically surface tailored gold nanoparticle liquids.

Stable aggregate-free colloidal suspensions of gold nanoparticle liquids (NPLs) in toluene and dichlorobenzene were prepared. NPLs were made by reduction of tetrachloroauric acid in the presence of mercaptoethane sulfonate and further treatments with surfactants. Gold nanoparticles were coated with a novel ionic bilayer corona which consists of an ionic thiol linker and alkyl ammonium chloride surfactants. NPLs were capable of solvent removal and redispersing in toluene and dichlorobenzene. The average particle size, corona shell thickness, and extent of aggregation were examined using small-angle neutron scattering (SANS) and high resolution transmission electron microscopy (HR-TEM). The volume fraction normalized scattering spectra for the three series of samples exhibited one normalized curve showing a Guinier plateau in the low-q (q < 0.02 angstroms(-1)) regime. This indicates the presence of aggregate-free stable colloidal suspensions within the examined range. The experimental scattering spectra were simulated using a polydisperse core-shell model with Schulz polydispersity approximation. This approximation resulted in average core diameters and average shell thicknesses of NPLs in d-toluene. HR-TEM studies of NPLs exhibited the presence of core-shell structures containing gold cores and corona layers.

Double-walled boron nitride nanotubes grown by floating catalyst chemical vapor deposition.

One-dimensional nanostructures exhibit quantum confinement which leads to unique electronic properties, making them attractive as the active elements for nanoscale electronic devices. Boron nitride nanotubes are of particular interest since, unlike carbon nanotubes, all chiralities are semiconducting. Here, we report a synthesis based on the use of low pressures of the molecular precursor borazine in conjunction with a floating nickelocene catalyst that resulted in the formation of double-walled boron nitride nanotubes. As has been shown for carbon nanotube production, the floating catalyst chemical vapor deposition method has the potential for creating high quality boron nitride nanostructures with high production volumes.

A study of the formation, purification and application as a SWNT growth catalyst of the nanocluster [HxPMo12O40[subset]H4Mo72Fe30(O2CMe)15O254(H2O)98].

The synthetic conditions for the isolation of the iron-molybdenum nanocluster FeMoC [HxPMo12O40 [subset]H4Mo72Fe30(O2CMe)15O254(H2O)98], along with its application as a catalyst precursor for VLS growth of SWNTs have been studied. As-prepared FeMoC is contaminated with the Keplerate cage [H4Mo72Fe30(O2CMe)15O254(H2O)98] without the Keggin [HxPMo12O40]n- template, however, isolation of pure FeMoC may be accomplished by Soxhlet extraction with EtOH. The resulting EtOH solvate is consistent with the replacement of the water ligands coordinated to Fe being substituted by EtOH. FeMoC-EtOH has been characterized by IR, UV-vis spectroscopy, MS, XPS and 31P NMR. The solid-state 31P NMR spectrum for FeMoC-EtOH (delta-5.3 ppm) suggests little effect of the paramagnetic Fe3+ centers in the Keplerate cage on the Keggin ion's phosphorous. The high chemical shift anisotropy, and calculated T1 (35 ms) and T2 (8 ms) values are consistent with a weak magnetic interaction between the Keggin ion's phosphorus symmetrically located within the Keplerate cage. Increasing the FeCl2 concentration and decreasing the pH of the reaction mixture optimizes the yield of FeMoC. The solubility and stability of FeMoC in H2O and MeOH-H2O is investigated. The TGA of FeMoC-EtOH under air, Ar and H2 (in combination with XPS) shows that upon thermolysis the resulting Fe : Mo ratio is highly dependent on the reaction atmosphere: thermolysis in air results in significant loss of volatile molybdenum components. Pure FeMoC-EtOH is found to be essentially inactive as a pre-catalyst for the VLS growth of single-walled carbon nanotubes (SWNTs) irrespective of the substrate or reaction conditions. However, reaction of FeMoC with pyrazine (pyz) results in the formation of aggregates that are found to be active catalysts for the growth of SWNTs. Activation of FeMoC may also be accomplished by the addition of excess iron. The observation of prior work's reported growth of SWNTs from FeMoC is discussed with respect to these results.

Peptide-mediated formation of single-wall carbon nanotube composites.

The formation of silica- and titania-coated single-wall carbon nanotubes (SWNTs) using a mutlifunctional peptide to both suspend SWNTs and direct the precipitation of silica and titania at room temperature is demonstrated.

Single-walled carbon nanotube growth using [Fe(3)(mu(3)-O)(mu-O(2)CR)(6)(L)(3)](n+) complexes as catalyst precursors.

We present herein the VLS growth of SWNTs from oxo-hexacarboxylate-triron precursors, [Fe(3)O(O(2)CCH(3))(6)(EtOH)(3)] and [Fe(3)O(O(2)CCH(2)OMe)(6)(H(2)O)(3)][FeCl(4)], on spin-on-glass surfaces, using C(2)H(4)/H(2) (750 degrees C) and CH(4)/H(2) (800 and 900 degrees C) growth conditions. The SWNTs have been characterized by AFM, SEM and Raman spectroscopy. The characteristics of the SWNTs are found to be independent of the identity of the precursor complex or the solvent from which it is spin-coated. The as grown SWNTs show a low level of side-wall defects and have an average diameter of 1.2-1.4 nm with a narrow distribution of diameters. At 750 and 800 degrees C the SWNTs are grown with a range of lengths (300 nm-9 microm), but at 900 degrees C only the longer SWNTs are observed (6-8 microm). The yield of SWNTs per unit area of catalyst nanoparticle decreases with the growth temperature. We have demonstrated that spin coating of molecular precursors allows for the formation of catalyst nanoparticles suitable for growth of SWNTs with a high degree of uniformity in the diameter, without the formation of preformed clusters of a set diameter.

Constrained iron catalysts for single-walled carbon nanotube growth.

The diameter of single walled carbon nanotubes (SWNTs) determines the electronic properties of the nanotube. The diameter of carbon nanotubes is dictated by the diameter of the catalyst particle. Here we describe the use of iron nanoparticles synthesized within the Dps protein cage as catalysts for the growth of single-walled carbon nanotubes. The discrete iron particles synthesized within the Dps protein cages when used as catalyst particles gives rise to single-walled carbon nanotubes with a limited diameter distribution.