Efficient Atomically Dispersed Co/N-C Catalysts for Formic Acid Dehydrogenation and Transfer Hydrodeoxygenation of Vanillin.

Atomically dispersed catalysts have gained considerable attention due to their unique properties and high efficiency in various catalytic reactions. Herein, a series of Co/N-doped carbon (N-C) catalysts was prepared using a metal-lignin coordination strategy and employed in formic acid dehydrogenation (FAD) and hydrodeoxygenation (HDO) of vanillin. The atomically dispersed Co/N-C catalysts showed outstanding activity, acid resistance, and long-term stability in FAD. The improved activity and stability may be attributed to the high dispersion of Co species, increased surface area, and strong Co-N interactions. XPS and XAS characterization revealed the formation of Co-N3 centers, which are assumed to be the active sites. In addition, DFT calculations demonstrated that the adsorption of formic acid on single-atom Co was stronger than that on Co13 clusters, which may explain the high catalytic activity. The Co/N-C catalyst also showed promising performance in the transfer HDO of vanillin with formic acid, without any external additional molecular H2.

Copper Site Motion Promotes Catalytic NOx Reduction under Zeolite Confinement.

Ammonia-mediated selective catalytic reduction (NH3-SCR) is currently the key approach to abate nitrogen oxides (NOx) emitted from heavy-duty lean-burn vehicles. The state-of-art NH3-SCR catalysts, namely, copper ion-exchanged chabazite (Cu-CHA) zeolites, perform rather poorly at low temperatures (below 200 °C) and are thus incapable of eliminating effectively NOx emissions under cold-start conditions. Here, we demonstrate a significant promotion of low-temperature NOx reduction by reinforcing the dynamic motion of zeolite-confined Cu sites during NH3-SCR. Combining complex impedance-based in situ spectroscopy (IS) and extended density-functional tight-binding molecular dynamics simulation, we revealed an environment- and temperature-dependent nature of the dynamic Cu motion within the zeolite lattice. Further coupling in situ IS with infrared spectroscopy allows us to unravel the critical role of monovalent Cu in the overall Cu mobility at a molecular level. Based on these mechanistic understandings, we elicit a boost of NOx reduction below 200 °C by reinforcing the dynamic Cu motion in various Cu-zeolites (Cu-CHA, Cu-ZSM-5, Cu-Beta, etc.) via facile postsynthesis treatments, either in a reductive mixture at low temperatures (below 250 °C) or in a nonoxidative atmosphere at high temperatures (above 450 °C).

Revealing the Formation and Reactivity of Cage-Confined Cu Pairs in Catalytic NOx Reduction over Cu-SSZ-13 Zeolites by In Situ UV-Vis Spectroscopy and Time-Dependent DFT Calculation.

The low-temperature mechanism of chabazite-type small-pore Cu-SSZ-13 zeolite, a state-of-the-art catalyst for ammonia-assisted selective reduction (NH3-SCR) of toxic NOx pollutants from heavy-duty vehicles, remains a debate and needs to be clarified for further improvement of NH3-SCR performance. In this study, we established experimental protocols to follow the dynamic redox cycling (i.e., CuII ↔ CuI) of Cu sites in Cu-SSZ-13 during low-temperature NH3-SCR catalysis by in situ ultraviolet-visible spectroscopy and in situ infrared spectroscopy. Further integrating the in situ spectroscopic observations with time-dependent density functional theory calculations allows us to identify two cage-confined transient states, namely, the O2-bridged Cu dimers (i.e., µ-η2:η2-peroxodiamino dicopper) and the proximately paired, chemically nonbonded CuI(NH3)2 sites, and to confirm the CuI(NH3)2 pair as a precursor to the O2-bridged Cu dimer. Comparative transient experiments reveal a particularly high reactivity of the CuI(NH3)2 pairs for NO-to-N2 reduction at low temperatures. Our study demonstrates direct experimental evidence for the transient formation and high reactivity of proximately paired CuI sites under zeolite confinement and provides new insights into the monomeric-to-dimeric Cu transformation for completing the Cu redox cycle in low-temperature NH3-SCR catalysis over Cu-SSZ-13.

Differentiating between Acidic and Basic Surface Hydroxyls on Metal Oxides by Fluoride Substitution: A Case Study on Blue TiO2 from Laser Defect Engineering.

Both oxygen vacancies and surface hydroxyls play a crucial role in catalysis. Yet, their relationship is not often explored. Herein, we prepare two series of TiO2 (rutile and P25) with increasing oxygen deficiency and Ti3+ concentration by pulsed laser defect engineering in liquid (PUDEL), and selectively quantify the acidic and basic surface OH by fluoride substitution. As indicated by EPR spectroscopy, the laser-generated Ti3+ exist near the surface of rutile, but appear to be deeper in the bulk for P25. Fluoride substitution shows that extra acidic bridging OH are selectively created on rutile, while the surface OH density remains constant for P25. These observations suggest near-surface Ti3+ are highly related to surface bridging OH, presumably the former increasing the electron density of the bridging oxygen to form more of the latter. We anticipate that fluoride substitution will enable better characterization of surface OH and its correlation with defects in metal oxides.

Defective Metal-Organic Frameworks with Tunable Porosity and Metal Active Sites for Significantly Improved Performance in Styrene Oxidation.

Metal active sites and sufficient porosity in metal-organic frameworks (MOFs) are crucial parameters determining the performances of catalysis, guest molecule adsorption, etc. Herein, through in situ introduction of Ru sites with different levels to Cu-BTC structure together with post-synthetic activation at 180 °C, a series of hierarchically porous CuRu-BTC (HP-CuRu-BTC) MOFs were obtained. Besides, selective thermal decomposition (STD) treatment was carried out at 240 °C to further tune the hierarchical pores and metal sites, yielding rare case of metal nanoparticles (NPs)@HP-CuRu-BTC composites. After full characterization by XRD, N2 physisorption, SEM, ICP and XPS, these HP-CuRu-BTC and NPs@HP-CuRu-BTC samples possess high surface area (682-1199 m2 g-1 ), hierarchical pores and highly distributed metal sites with reduced oxidation states (Cu+ and Ru2+ ), indicating regulation of both metal sites and hierarchical pores. The HP-CuRu-BTC and NPs@HP-CuRu-BTC were further employed as catalysts for the heterogeneous styrene oxidation reaction under mild condition. Compared to microporous Cu-BTC with unary metal component, HP-CuRu-BTC-3 and NPs@HP-CuRu-BTC-3 exhibited more than 2 times higher styrene conversion after 7 hours reaction under same condition.

Ammonia Abatement via Selective Oxidation over Electron-Deficient Copper Catalysts.

Selective catalytic ammonia-to-dinitrogen oxidation (NH3-SCO) is highly promising for the abatement of NH3 emissions from flue gas purification devices. However, there is still a lack of high-performance and cost-effective NH3-SCO catalysts for real applications. Here, highly dispersed, electron-deficient Cu-based catalysts were fabricated using nitrogen-doped carbon nanotubes (NCNT) as support. In NH3-SCO catalysis, the Cu/NCNT outperformed Cu supported on N-free CNTs (Cu/OCNT) and on other types of supports (i.e., activated carbon, Al2O3, and zeolite) in terms of activity, selectivity to the desired product N2, and H2O resistance. Besides, Cu/NCNT demonstrated a better structural stability against oxidation and a higher NH3 storage capacity (in the presence of H2O vapor) than Cu/OCNT. Quasi in situ X-ray photoelectron spectroscopy revealed that the surface N species facilitated electron transfer from Cu to the NCNT support, resulting in electron-deficient Cu catalysts with superior redox properties, which are essential for NH3-SCO catalysis. By temperature-programmed surface reaction studies and systematic kinetic measurements, we unveiled that the NH3-SCO reaction over Cu/NCNT proceeded via the internal selective catalytic reaction (i-SCR) route; i.e., NH3 was oxidized first to NO, which then reacted with NH3 and O2 to form N2 and H2O. This study paves a new route for the design of highly active, H2O-tolerant, and low-cost Cu catalysts for the abatement of slip NH3 from stationary emissions via selective oxidation to N2.

Integrated analysis of the faecal metagenome and serum metabolome reveals the role of gut microbiome-associated metabolites in the detection of colorectal cancer and adenoma.

OBJECTIVE: To profile gut microbiome-associated metabolites in serum and investigate whether these metabolites could distinguish individuals with colorectal cancer (CRC) or adenoma from normal healthy individuals. DESIGN: Integrated analysis of untargeted serum metabolomics by liquid chromatography-mass spectrometry and metagenome sequencing of paired faecal samples was applied to identify gut microbiome-associated metabolites with significantly altered abundance in patients with CRC and adenoma. The ability of these metabolites to discriminate between CRC and colorectal adenoma was tested by targeted metabolomic analysis. A model based on gut microbiome-associated metabolites was established and evaluated in an independent validation cohort. RESULTS: In total, 885 serum metabolites were significantly altered in both CRC and adenoma, including eight gut microbiome-associated serum metabolites (GMSM panel) that were reproducibly detected by both targeted and untargeted metabolomics analysis and accurately discriminated CRC and adenoma from normal samples. A GMSM panel-based model to predict CRC and colorectal adenoma yielded an area under the curve (AUC) of 0.98 (95% CI 0.94 to 1.00) in the modelling cohort and an AUC of 0.92 (83.5% sensitivity, 84.9% specificity) in the validation cohort. The GMSM model was significantly superior to the clinical marker carcinoembryonic antigen among samples within the validation cohort (AUC 0.92 vs 0.72) and also showed promising diagnostic accuracy for adenomas (AUC=0.84) and early-stage CRC (AUC=0.93). CONCLUSION: Gut microbiome reprogramming in patients with CRC is associated with alterations of the serum metabolome, and GMSMs have potential applications for CRC and adenoma detection.

The Roles of Composition and Mesostructure of Cobalt-Based Spinel Catalysts in Oxygen Evolution Reactions.

By using the crystalline precursor decomposition approach and direct co-precipitation the composition and mesostructure of cobalt-based spinels can be controlled. A systematic substitution of cobalt with redox-active iron and redox-inactive magnesium and aluminum in a cobalt spinel with anisotropic particle morphology with a preferred 111 surface termination is presented, resulting in a substitution series including Co3 O4 , MgCo2 O4 , Co2 FeO4 , Co2 AlO4 and CoFe2 O4 . The role of redox pairs in the spinels is investigated in chemical water oxidation by using ceric ammonium nitrate (CAN test), electrochemical oxygen evolution reaction (OER) and H2 O2 decomposition. Studying the effect of dominant surface termination, isotropic Co3 O4 and CoFe2 O4 catalysts with more or less spherical particles are compared to their anisotropic analogues. For CAN-test and OER, Co3+ plays the major role for high activity. In H2 O2 decomposition, Co2+ reveals itself to be of major importance. Redox active cations in the structure enhance the catalytic activity in all reactions. A benefit of a predominant 111 surface termination depends on the cobalt oxidation state in the as-prepared catalysts and the investigated reaction.

A Perspective on Heterogeneous Catalysts for the Selective Oxidation of Alcohols.

Selective oxidation of higher alcohols using heterogeneous catalysts is an important reaction in the synthesis of fine chemicals with added value. Though the process for primary alcohol oxidation is industrially established, there is still a lack of fundamental understanding considering the complexity of the catalysts and their dynamics under reaction conditions, especially when higher alcohols and liquid-phase reaction media are involved. Additionally, new materials should be developed offering higher activity, selectivity, and stability. This can be achieved by unraveling the structure-performance correlations of these catalysts under reaction conditions. In this regard, researchers are encouraged to develop more advanced characterization techniques to address the complex interplay between the solid surface, the dissolved reactants, and the solvent. In this mini-review, we report some of the most important approaches taken in the field and give a perspective on how to tackle the complex challenges for different approaches in alcohol oxidation while providing insight into the remaining challenges.

Liquid-Phase Cyclohexene Oxidation with O2 over Spray-Flame-Synthesized La1-x Srx CoO3 Perovskite Nanoparticles.

La1-x Srx CoO3 (x=0, 0.1, 0.2, 0.3, 0.4) nanoparticles were prepared by spray-flame synthesis and applied in the liquid-phase oxidation of cyclohexene with molecular O2 as oxidant under mild conditions. The catalysts were systematically characterized by state-of-the-art techniques. With increasing Sr content, the concentration of surface oxygen vacancy defects increases, which is beneficial for cyclohexene oxidation, but the surface concentration of less active Co2+ was also increased. However, Co2+ cations have a superior activity towards peroxide decomposition, which also plays an important role in cyclohexene oxidation. A Sr doping of 20 at. % was found to be the optimum in terms of activity and product selectivity. The catalyst also showed excellent reusability over three catalytic runs; this can be attributed to its highly stable particle size and morphology. Kinetic investigations revealed first-order reaction kinetics for temperatures between 60 and 100 °C and an apparent activation energy of 68 kJ mol-1 for cyclohexene oxidation. Moreover, the reaction was not affected by the applied O2 pressure in the range from 10 to 20 bar. In situ attenuated total reflection infrared spectroscopy was used to monitor the conversion of cyclohexene and the formation of reaction products including the key intermediate cyclohex-2-ene-1-hydroperoxide; spin trap electron paramagnetic resonance spectroscopy provided strong evidence for a radical reaction pathway by identifying the cyclohexenyl alkoxyl radical.

The Role of Nitrogen-doping in the Catalytic Transfer Hydrogenation of Phenol to Cyclohexanone with Formic Acid over Pd supported on Carbon Nanotubes.

Highly selective one-step hydrogenation of phenol to cyclohexanone, an important intermediate in the production of nylon 6 and nylon 66, is desirable but remains a challenge. Pd nanoparticles supported on nitrogen- and oxygen-functionalized carbon nanotubes (NCNTs, OCNTs) were prepared, characterized, and applied in the hydrogenation of phenol to cyclohexanone to study the effect of N-doping. Almost full conversion of phenol with high selectivity to cyclohexanone was achieved over Pd/NCNT under mild reaction conditions using either H2 or formic acid (FA) as a hydrogen source. The effects of reaction temperature and FA/phenol ratio and the reusability were investigated. Separate FA decomposition experiments without and with the addition of phenol were performed to investigate the reaction mechanism, especially the deactivation behavior. Deactivation was observed for both catalysts during the FA decomposition, while only Pd/OCNT rather than Pd/NCNT was deactivated in the transfer hydrogenation with FA and the FA decomposition in the presence of phenol, indicating the unique role of N-doping. Therefore, we assume that deactivation is caused by the strongly bound formates on the active Pd sites, suppressing further FA decomposition and/or transfer hydrogenation on Pd. The nonplanar adsorption of phenol on NCNTs via weak O-H⋅⋅⋅N interactions enables the occurrence of the subsequent hydrogenation by adsorbed formate on Pd.

Formic Acid-Assisted Selective Hydrogenolysis of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran over Bifunctional Pd Nanoparticles Supported on N-Doped Mesoporous Carbon.

Biomass-derived 5-hydroxymethylfurfural (HMF) is regarded as one of the most promising platform chemicals to produce 2,5-dimethylfuran (DMF) as a potential liquid transportation fuel. Pd nanoparticles supported on N-containing and N-free mesoporous carbon materials were prepared, characterized, and applied in the hydrogenolysis of HMF to DMF under mild reaction conditions. Quantitative conversion of HMF to DMF was achieved in the presence of formic acid (FA) and H2 over Pd/NMC within 2 h. The reaction mechanism, especially the multiple roles of FA, was explored through a detailed comparative study by varying hydrogen source, additive, and substrate as well as by applying in situ ATR-IR spectroscopy. The major role of FA is to shift the dominant reaction pathway from the hydrogenation of the aldehyde group to the hydrogenolysis of the hydroxymethyl group via the protonation by FA at the C-OH group, lowering the activation barrier of the C-O bond cleavage and thus significantly enhancing the reaction rate. XPS results and DFT calculations revealed that Pd2+ species interacting with pyridine-like N atoms significantly enhance the selective hydrogenolysis of the C-OH bond in the presence of FA due to their high ability for the activation of FA and the stabilization of H- .

Anchoring of palladium nanoparticles on N-doped mesoporous carbon.

Pd nanoparticles deposited on nitrogen-doped mesoporous carbon are promising catalysts for highly selective and effective catalytic hydrogenation reactions. To design and utilize these novel catalysts, it is essential to understand the effect of N doping on the metal-support interactions. A combined experimental (X-ray photoelectron spectroscopy) and computational (density functional theory) approach is used to identify preferential adsorption sites and to give detailed explanations of the corresponding metal-support interactions. Pyridinic N atoms turned out to be the preferential adsorption sites for Pd nanoparticles on nitrogen-doped mesoporous carbon, interacting through their lone pairs (LPs) with the Pd atoms via N-LP - Pd dσ and N-LP - Pd s and Pd dπ - π* charge transfer, which leads to a change in the Pd oxidation state. Our results evidence the existence of bifunctional palladium nanoparticles containing Pd0 and Pd2+ centers.

Photocatalytic Oxidation of α-C-H Bonds in Unsaturated Hydrocarbons through a Radical Pathway Induced by a Molecular Cocatalyst.

To improve the photocatalytic oxidation of α-C-H bonds in unsaturated hydrocarbons, N-hydroxyphthalimide (NHPI) was used as a molecular cocatalyst with CdS as the photoabsorber. Compared with previously reported photocatalysts involving solid cocatalysts, metal-free NHPI offers better sustainability in addition to the significantly enhanced performance as cocatalyst. The photogenerated holes were transferred into the more active phthalimide-N-oxyl radical (PINO) by reacting with NHPI. In this way, α-C-H bond oxidation was significantly improved through the activation by PINO; even for the sluggish toluene oxidation, the apparent quantum efficiency was as high as 36.5 %. The effects of substrates/NHPI concentration ratio, reaction temperature, and time as well as the reaction intermediates were comprehensively studied. It was possible to identify ketones/aldehydes as the primary products, and overoxidation was controlled by adjusting the substrates/NHPI concentration ratio and reaction time. Thus, the radical path induced by the NHPI-PINO redox pair is an efficient alternative to boost the sluggish photocatalytic oxidation of α-C-H bonds.

Anaerobic Alcohol Conversion to Carbonyl Compounds over Nanoscaled Rh-Doped SrTiO3 under Visible Light.

Photocatalytic oxidation of organic compounds on semiconductors provides a mild approach for organic synthesis and solar energy utilization. Herein, we identify the key points for the photocatalytic oxidation over Pt-loaded Rh-doped strontium titanate allowing the conversion of alcohols efficiently and selectively to aldehydes and ketones under anaerobic conditions and visible light with an apparent quantum efficiency of pure benzyl alcohol oxidation at 420 nm of ≤49.5%. Mechanistic investigations suggest that thermodynamically the controlled valence band edge position via Rh doping provides a suitable oxidation ability of photogenerated holes, avoiding the powerful hydroxyl radical intermediates prone to overoxidation resulting in high selectivity. Kinetically, oxygen vacancies induced by Rh3+ substitution in the SrTiO3 lattice not only favor the dissociative adsorption of alcohols yielding alkoxy species but also induce the weakening of the α-C-H bond facilitating its cleavage by the photogenerated holes. Pt nanoparticles deposited as a cocatalyst contribute to the final hydrogen evolution.

Towards Mechanistic Understanding of Liquid-Phase Cinnamyl Alcohol Oxidation with tert-Butyl Hydroperoxide over Noble-Metal-Free LaCo1-x Fex O3 Perovskites.

Noble-metal-free perovskite oxides are promising and well-known catalysts for high-temperature gas-phase oxidation reactions, but their application in selective oxidation reactions in the liquid phase has rarely been studied. We report the liquid-phase oxidation of cinnamyl alcohol over spray-flame synthesized LaCo1-x Fex O3 perovskite nanoparticles with tert-butyl hydroperoxide (TBHP) as the oxidizing agent under mild reaction conditions. The catalysts were characterized by XRD, BET, EDS and elemental analysis. LaCo0.8 Fe0.2 O3 showed the best catalytic properties indicating a synergistic effect between cobalt and iron. The catalysts were found to be stable against metal leaching as proven by hot filtration, and the observed slight deactivation is presumably due to segregation as determined by EDS. Kinetic studies revealed an apparent activation energy of 63.6 kJ mol-1 . Combining kinetic findings with TBHP decomposition as well as control experiments revealed a complex reaction network.

Manipulating catalytic pathways: deoxygenation of palmitic acid on multifunctional catalysts.

The mechanism of the catalytic reduction of palmitic acid to n-pentadecane at 260 °C in the presence of hydrogen over catalysts combining multiple functions has been explored. The reaction involves rate-determining reduction of the carboxylic group of palmitic acid to give hexadecanal, which is catalyzed either solely by Ni or synergistically by Ni and the ZrO2 support. The latter route involves adsorption of the carboxylic acid group at an oxygen vacancy of ZrO2 and abstraction of the α-H with elimination of O to produce the ketene, which is in turn hydrogenated to the aldehyde over Ni sites. The aldehyde is subsequently decarbonylated to n-pentadecane on Ni. The rate of deoxygenation of palmitic acid is higher on Ni/ZrO2 than that on Ni/SiO2 or Ni/Al2O3, but is slower than that on H-zeolite-supported Ni. As the partial pressure of H2 is decreased, the overall deoxygenation rate decreases. In the absence of H2, ketonization catalyzed by ZrO2 is the dominant reaction. Pd/C favors direct decarboxylation (-CO2), while Pt/C and Raney Ni catalyze the direct decarbonylation pathway (-CO). The rate of deoxygenation of palmitic acid (in units of mmol moltotal metal(-1) h(-1)) decreases in the sequence r(Pt black) ≈r(Pd black) >r(Raney Ni) in the absence of H2 . In situ IR spectroscopy unequivocally shows the presence of adsorbed ketene (C=C=O) on the surface of ZrO2 during the reaction with palmitic acid at 260 °C in the presence or absence of H2.

Stabilizing catalytic pathways via redundancy: selective reduction of microalgae oil to alkanes.

A new route to convert crude microalgae oils using ZrO(2)-promoted Ni catalysts into diesel-range alkanes in a cascade reaction is presented. Ni nanoparticles catalyze the selective cleavage of the C-O of fatty acid esters, leading to the hydrogenolysis of triglycerides. Hydrogenation of the resulting fatty acids to aldehydes (rate-determining step) is uniquely catalyzed via two parallel pathways, one via aldehyde formation on metallic Ni and the second via a synergistic action by Ni and ZrO(2) through adsorbing the carboxylic groups at the oxygen vacancies of ZrO(2) to form carboxylates and subsequently abstracting the α-hydrogen atom to produce ketene, which is in turn hydrogenated to aldehydes and decarbonylated on Ni nanoparticles.