Influence of new complete dentures on the touch perception threshold and quality of life of edentulous patients.

OBJECTIVE: To evaluate the touch perception threshold of the alveolar mucosa and quality of life of edentulous patients before (T0) and 30 days after (T1) the insertion of new complete dentures. BACKGROUND: Touch perception is important so that edentulous patients can detect the position of complete dentures in their mouth. MATERIALS AND METHODS: This study included 32 complete denture wearers with good oral and systemic health and no temporomandibular disorders for at least 5 years. At each time point (T0 and T1), two tests were performed (touch perception threshold and quality-of-life scale). The touch perception threshold (Von Frey or Semmes-Weinstein test) was assessed using nylon monofilaments on the regions of the alveolar mucosa of the maxilla and mandible. The Oral Health Impact Profile for edentulous individuals (OHIP-EDENT) was administered to evaluate oral health-related quality of life. RESULTS: In the maxilla and mandible, the touch perception thresholds for all regions of the alveolar mucosa were significantly lower at T1 than at T0. The OHIP-EDENT mean scores showed that the overall quality of life was significantly better at T1 (3.6) than at T0 (4.7), and a significant improvement in quality of life was observed in all domains of the OHIP-EDENT at T1. For touch perception threshold, effect sizes ranged from 0.4 to 0.8; and for quality of life, effect sizes ranged from 0.4 to 1.0. CONCLUSIONS: New complete dentures reduced the touch perception threshold of the alveolar mucosa of both edentulous arches and improved individuals' quality of life.

Prevalence of anophthalmia etiological factors in patients treated in a reference center: A retrospective study.

Background: Ocular prosthesis rehabilitation has an important social, psychological, esthetic, and functional role. Congenital factors, trauma, and tumors, among others, can cause anophthalmia, and it is essential to identify the etiology to guide its prevention and treatment. Methods: The aim of this study was to retrospectively investigate the records of patients treated from 2013 to 2020 by the Oral and Maxillofacial Prosthesis Group, aiming to identify the prevalence of patients with anophthalmia and the etiology of their anophthalmia. After approval by the Human Research Ethics Committee, two calibrated researchers evaluated 520 records, identifying those from patients with anophthalmia. The inclusion criteria were records with complete and legible information from patients with anophthalmia and a description of their etiology. Descriptive statistics were performed, and etiological factors were categorized into trauma, congenital cause, end-stage eye disease, and tumor. Spearman's correlation was performed to verify the relation between gender and anophthalmia etiology, with a 5% significance level. Seventy-two records were included in the study. Results: It was observed that 33.4% of patients were women and 66.6% were men. The etiologies were physical trauma (52.4%), tumor (21.8%), end-stage eye disease (16.6%), and congenital cause (9.2%), and there was no correlation between gender and these etiologies (p = .301). Conclusion: Most of the cases identified were of traumatic origin, which allows the establishment of preventive and educational measures to avoid new cases of anophthalmia.

The Inflammation Level and a Microbiological Analysis of the Anophthalmic Cavities of Unilateral Ocular Prosthesis Users: A Blind, Randomized Observational Study.

Irritation and biofilm adhesion are complaints associated with ocular prosthesis use. This study aimed to evaluate the effects of prosthesis repolishing on several conditions of anophthalmic volunteers. Participants were divided into two groups: intervention (IG, n = 10) and nonintervention (NIG, n = 6) groups. The anophthalmic cavity, contralateral eye, and prosthesis surface were evaluated at initial, day 15, and day 30 after repolishing. Microbiological analysis (colony-forming units), exfoliative cytology (conjunctiva inflammatory cells), sensory analysis (quantitative mechanical sensory test), tear production (Schirmer's test), and conjunctival inflammation (clinical evaluation) were performed. Nonparametric tests were used to compare groups in the initial period and to analyze periods for the IG (p < 0.05). More microorganisms were formed in the anophthalmic socket and prosthesis than in the contralateral eye in the initial period. For IG, the anophthalmic cavity exhibited more microorganisms and inflammatory clinical signs in the initial period than at 15 and 30 after repolishing. The prosthesis showed greater accumulations of total bacteria and Candida albicans in the initial period than at 15 and 30 days after repolishing. The anophthalmic cavity had more palpebral inflammation than the contralateral eye. In conclusion, repolishing reduced the number of microorganisms and inflammatory signs over time.

Simplified prosthetic rehabilitation of a patient with partial finger amputation after a firearm injury.

OBJECTIVE: This study reports a clinical case of rehabilitation of a patient who had her left little finger amputated at the mesial phalanx because of a gunshot wound. The finger prosthesis was custom- made using a silicone. CASE DESCRIPTION: This study presents a clinical case of a female patient who had her left little finger amputated at the mesial phalanx because of a gunshot wound in 2016. The patient was attended at a reference center in maxillofacial rehabilitation in the city of Brasilia, Distrito Federal, Brazil, for the manufacture of a finger prosthesis. After molding, a finger waxing was obtained using the right little finger as a template. The waxing was later adjusted on the plaster model of the affected stump. The prosthesis was manufactured with silicone and intrinsically stained with a makeup powder. A water-based adhesive and a ring were used to generate a slight compression so that the prosthesis was retained on the stump. OUTCOMES: The rehabilitation showed satisfactory levels of stability, retention, and aesthetics, and it was usable and clinically acceptable, as observed in a follow-up appointment in February 2020. CONCLUSIONS: The complete or partial reestablishment of functions performed by important structures, such as the fingers, is essential to increase the quality of life of individuals, improving their performance of daily activities. In addition, reporting on this public health problem allows scientific advancement in the area.

Comparison of the Morse Cone Connection with the Internal Hexagon and External Hexagon Connections Based on Microleakage - Review.

The gap formed at the abutment-implant interface brings about a bacterial colonization. In addition, a bacterial reservoir can be established within the implant. The build-up of microorganisms around the implant can cause soft tissue infections and bone loss around the implant, which can lead to implant failure. Our literature review aimed to evaluate the infiltration at the implant-abutment interface, comparing the Morse cone connection with the external hexagon and internal hexagon connections. A literature search using the PubMed database was performed on March 24, 2021. The search terms were combinations of "Morse cone" or "Morse taper" with each of the following terms (individually): "microleakage", "leakage", "infiltration", and "penetration". The inclusion criterion was in vitro studies comparing the Morse cone with the external hexagon and/or internal hexagon, based on infiltration at the implant-abutment interface. The exclusion criterion was the evaluation of microleakage at the implant-abutment interface after applying a sealant over this region. The search was expanded as needed. There was no limit on the year of publication, and only articles written in English were included. In addition, references cited in included articles were also included in this review when they were appropriate. This literature review concluded that, in most cases, the microleakage in the Morse cone connection was lower when compared with the external hexagon and internal hexagon connections.

Relation Between Insertion Torque and Implant Stability Quotient: A Clinical Study.

OBJECTIVES: This study aimed to assess the relation between the insertion torque and implant stability quotient (ISQ recorded immediately and 6 months after implant placement). MATERIALS AND METHODS: Twenty-five patients over the age of 18 years were selected for this study. One implant was placed per patient after tooth extraction. All implants had the same size (11.5 × 3.75 mm) and brand (Hexagonal Morse cone, DSP Biomedical). The insertion torque (Ncm) and resonance frequency analysis (ISQ value) (Osstell Mentor) were used to assess the primary stability (on the day of surgery). After 6 months, resonance frequency analysis was used to assess the secondary stability of each implant. STATISTICAL ANALYSIS: The insertion torque data were correlated with ISQ measurements by using Pearson's correlation. The significance level was 5%. RESULTS: There was a positive correlation between insertion torque and initial ISQ (correlation: 0.457; p = 0.022); however, no correlation was found between insertion torque and final ISQ (p = 0.308). CONCLUSION: The present study demonstrated that there is a positive correlation between the insertion torque and the initial ISQ. Therefore, the higher the insertion torque, the higher the initial ISQ (and vice versa).

Alcohol and light-polymerizing glaze effect on the physical and mechanical properties of a bisacrylate composite resin before and after immersion in chlorhexidine gluconate.

STATEMENT OF PROBLEM: The use of 0.12% chlorhexidine gluconate (CHX) may damage bisacrylate composite resin interim restorations, but whether they can be protected with an application of alcohol and/or the use of a glaze is unclear. PURPOSE: The purpose of this in vitro study was to evaluate the effect of applying a 70% alcohol solution on the physical and mechanical properties of a bisacrylate composite resin, with and without the application of a light-polymerizing glaze subjected to 0.12% CHX twice a day for 7 days. MATERIAL AND METHODS: Forty specimens of an autopolymerized bisacrylate composite resin were divided into 4 groups (n=10): Group C (without alcohol, without glaze), Group G (without alcohol, with glaze), Group A (with alcohol, without glaze), and Group AG (with alcohol, with glaze). All specimens were submitted to in vitro treatment with 0.12% CHX for 7 days, and tests of color alteration (ΔE00), microhardness, roughness, and surface were performed initially and after treatment. Data were submitted to analysis of variance (ANOVA) and the Tukey HSD test (α=.05). RESULTS: Group A had the lowest mean value of ΔE00 with a significant statistical difference from Group C. The groups with alcohol presented higher microhardness mean values compared with groups without alcohol in both periods of analysis, except for the groups with glaze in the final period. Group C showed higher mean roughness values in comparison with Group A in both periods. Group AG presented higher mean roughness values than Group G. Surface energy values did not vary significantly among groups, except between Groups C and A in the final period. CONCLUSIONS: The application of alcohol optimized the properties of the autopolymerized bisacrylate composite resin analyzed, with and without the application of glaze. Overall, the use of CHX changed the microhardness and roughness when the glaze was applied.