Dispersal distances from splash-cup plants depend on the cup's angle and contents.

Splash-cup plants disperse propagules via raindrops striking cup-shaped fruiting bodies. The seeds are ejected at velocities up to five times the impact speed of the raindrop and are dispersed up to 1 m from the parent plant. Here, we examine the effects of cup angles and the presence of seed mimics to understand the dynamics of this unique method of dispersal. Our findings demonstrate that: (i) cup angles that launched seeds the furthest ranged from approximately 30° to 50°, matching the range of angles seen in splash-cup plants. (ii) Seeds travel shorter distances than water droplets alone, and this distance depends on the number of seeds in the cup. (iii) Not all seeds are ejected from initially dry cups, leaving cups with some seeds and some water. (iv) Nearly all seeds are ejected from cups that contain both water and seeds, and those that are ejected travel significantly further than those from dry cups. These results confirm the possibility that the conical shape of splash cup plants may be adapted to maximize dispersal distance and benefit from multiple splash events. Our results also illustrate that future work on these plants should include seeds rather than water droplets alone.

The effect of external flow on 3D orientation of a microscopic sessile suspension feeder, Vorticella convallaria.

Vorticella convallaria are microscopic sessile suspension feeders that live attached to substrates in aquatic environments. They feed using a self-generated current and help maintain the health of aquatic ecosystems and wastewater treatment facilities by consuming bacteria and detritus. Their environmental impact is mediated by their feeding rate. In ambient flow, feeding rates are highly dependent on an individual's orientation relative to the substrate and the flow. Here, we investigate how this orientation is impacted by flow speed. Furthermore, we examined whether individuals actively avoid orientations unfavorable for feeding. We exposed individuals to unidirectional laminar flow at shear rates of 0, 0.5, 1.0, and 1.5 s-1, and recorded their 3D orientation using a custom biplanar microscope. We determined that V. convallaria orientation became progressively tilted downstream as the shear rate increased, but individuals were still able to actively reorient. Additionally, at higher shear rates, individuals spent a larger fraction of their time in orientations with reduced feeding rates. Our shear rates correspond to freestream flows on the scale of mm s-1 to cm s-1 in natural environments.

Incorporating recirculation effects into metrics of feeding performance for current-feeding zooplankton.

The feeding performance of zooplankton influences their evolution and can explain their behaviour. A commonly used metric for feeding performance is the volume of fluid that flows through a filtering surface and is scanned for food. Here, we show that such a metric may give incorrect results for organisms that produce recirculatory flows, so that fluid flowing through the filter may have been already filtered of food. In a numerical model, we construct a feeding metric that correctly accounts for recirculation in a sessile model organism inspired by our experimental observations of Vorticella and its flow field. Our metric tracks the history of current-borne particles to determine if they have already been filtered by the filtering surface. Examining the pathlines of food particles reveals that the capture of fresh particles preferentially involves the tips of cilia, which we corroborate in observations of feeding Vorticella. We compare the amount of fresh nutrient particles carried to the organism with other metrics of feeding, and show that metrics that do not take into account the history of particles cannot correctly compute the volume of freshly scanned fluid.

The effect of external flow on the feeding currents of sessile microorganisms.

Microscopic sessile suspension feeders live attached to surfaces and, by consuming bacteria-sized prey and by being consumed, they form an important part of aquatic ecosystems. Their environmental impact is mediated by their feeding rate, which depends on a self-generated feeding current. The feeding rate has been hypothesized to be limited by recirculating eddies that cause the organisms to feed from water that is depleted of food particles. However, those results considered organisms in still water, while ambient flow is often present in their natural habitats. We show, using a point-force model, that even very slow ambient flow, with speed several orders of magnitude less than that of the self-generated feeding current, is sufficient to disrupt the eddies around perpendicular suspension feeders, providing a constant supply of food-rich water. However, the feeding rate decreases in external flow at a range of non-perpendicular orientations due to the formation of recirculation structures not seen in still water. We quantify the feeding flow and observe such recirculation experimentally for the suspension feeder Vorticella convallaria in external flows typical of streams and rivers.

A new angle on microscopic suspension feeders near boundaries.

Microscopic sessile suspension feeders are a critical component in aquatic ecosystems, acting as an intermediate trophic stage between bacteria and higher eukaryotic taxa. Because they live attached to boundaries, it has long been thought that recirculation of the feeding currents produced by sessile suspension feeders inhibits their ability to access fresh fluid. However, previous models for the feeding flows of these organisms assume that they feed by pushing fluid perpendicular to surfaces they live upon, whereas we observe that sessile suspension feeders often feed at an angle to these boundaries. Using experiments and calculations, we show that living suspension feeders (Vorticella) likely actively regulate the angle that they feed relative to a substratum. We then use theory and simulations to show that angled feeding increases nutrient and particle uptake by reducing the reprocessing of depleted water. This work resolves an open question of how a key class of suspension-feeding organisms escapes physical limitations associated with their sessile lifestyle.

Cooperatively generated stresslet flows supply fresh fluid to multicellular choanoflagellate colonies.

The flagellated protozoan Salpingoeca rosetta is one of the closest relatives of multicellular animals. Unicellular S. rosetta can be induced to form multicellular colonies, but colonies swim more slowly than individual cells so the advantages conferred by colony formation are uncertain. Here we use theoretical models to show that hydrodynamic cooperation between cells can increase the fluid supply to the colony, an important predictor of feeding rate. Our results suggest that hydrodynamic benefits may have been an important selective factor in the evolution of early multicellular animals.

Nearby boundaries create eddies near microscopic filter feeders.

We show through calculations, simulations and experiments that the eddies often observed near sessile filter feeders are frequently due to the presence of nearby boundaries. We model the common filter feeder Vorticella, which is approximately 50 microm across and which feeds by removing bacteria from ocean or pond water that it draws towards itself. We use both an analytical stokeslet model and a Brinkman flow approximation that exploits the narrow-gap geometry to predict the size of the eddy caused by two parallel no-slip boundaries that represent the slides between which experimental observations are often made. We also use three-dimensional finite-element simulations to fully solve for the flow around a model Vorticella and analyse the influence of multiple nearby boundaries. Additionally, we track particles around live feeding Vorticella in order to determine the experimental flow field. Our models are in good agreement both with each other and with experiments. We also provide approximate equations to predict the experimental eddy sizes owing to boundaries both for the case of a filter feeder between two slides and for the case of a filter feeder attached to a perpendicular surface between two slides.

Explosively launched spores of ascomycete fungi have drag-minimizing shapes.

The forcibly launched spores of ascomycete fungi must eject through several millimeters of nearly still air surrounding fruiting bodies to reach dispersive air flows. Because of their microscopic size, spores experience great fluid drag, and although this drag can aid transport by slowing sedimentation out of dispersive air flows, it also causes spores to decelerate rapidly after launch. We hypothesize that spores are shaped to maximize their range in the nearly still air surrounding fruiting bodies. To test this hypothesis we numerically calculate optimal spore shapes-shapes of minimum drag for prescribed volumes-and compare these shapes with real spore shapes taken from a phylogeny of >100 species. Our analysis shows that spores are constrained to remain within 1% of the minimum possible drag for their size. From the spore shapes we predict the speed of spore launch, and confirm this prediction through high-speed imaging of ejection in Neurospora tetrasperma. By reconstructing the evolutionary history of spore shapes within a single ascomycete family we measure the relative contributions of drag minimization and other shape determinants to spore shape evolution. Our study uses biomechanical optimization as an organizing principle for explaining shape in a mega-diverse group of species and provides a framework for future measurements of the forces of selection toward physical optima.