Pentose-rich hydrolysate from oil palm empty fruit bunches for ß-glucan production using Pichia jadinii and Cyberlindnera jadinii.

Pentose-rich hydrolysate obtained from dilute acid pretreatment of oil palm empty fruit bunches was successfully consumed by pentose-consuming yeasts: Cyberlindnera jadinii (Cj) and Pichia jadinii (Pj). Nitrogen supplementation and no additional detoxification step were required. Pj produced 5.87 g/L of biomass using a C/N ratio of 14 after 120 h of fermentation, with xylose consumption of 71%. Cj produced 10.50 g/L of biomass after 96 h of fermentation with C/N ratio of 11.5, with maximum xylose consumption of 85%. ß-glucans, high value-added macromolecules, were further extracted from the yeast biomass, achieving yields of 3.1 and 3.0% from Pj and Cj, respectively. The isolated polysaccharides showed a chemical structure of ß-(1,3)-glucan with residues of other molecules. Additionally, ß-(1,6) branches seems to have been broken during isolation process. Further studies assessing ß-glucans production at industrial scale should be carried out looking for nitrogen sources and optimizing the ß-glucan isolation method.

Supercritical Fluids: A Promising Technique for Biomass Pretreatment and Fractionation.

Lignocellulosic biomasses are primarily composed of cellulose, hemicelluloses and lignin and these biopolymers are bonded together in a heterogeneous matrix that is highly recalcitrant to chemical or biological conversion processes. Thus, an efficient pretreatment technique must be selected and applied to this type of biomass in order to facilitate its utilization in biorefineries. Classical pretreatment methods tend to operate under severe conditions, leading to sugar losses by dehydration and to the release of inhibitory compounds such as furfural (2-furaldehyde), 5-hydroxy-2-methylfurfural (5-HMF), and organic acids. By contrast, supercritical fluids can pretreat lignocellulosic materials under relatively mild pretreatment conditions, resulting in high sugar yields, low production of fermentation inhibitors and high susceptibilities to enzymatic hydrolysis while reducing the consumption of chemicals, including solvents, reagents, and catalysts. This work presents a review of biomass pretreatment technologies, aiming to deliver a state-of-art compilation of methods and results with emphasis on supercritical processes.

Current Pretreatment Technologies for the Development of Cellulosic Ethanol and Biorefineries.

Lignocellulosic materials, such as forest, agriculture, and agroindustrial residues, are among the most important resources for biorefineries to provide fuels, chemicals, and materials in such a way to substitute for, at least in part, the role of petrochemistry in modern society. Most of these sustainable biorefinery products can be produced from plant polysaccharides (glucans, hemicelluloses, starch, and pectic materials) and lignin. In this scenario, cellulosic ethanol has been considered for decades as one of the most promising alternatives to mitigate fossil fuel dependence and carbon dioxide accumulation in the atmosphere. However, a pretreatment method is required to overcome the physical and chemical barriers that exist in the lignin-carbohydrate composite and to render most, if not all, of the plant cell wall components easily available for conversion into valuable products, including the fuel ethanol. Hence, pretreatment is a key step for an economically viable biorefinery. Successful pretreatment method must lead to partial or total separation of the lignocellulosic components, increasing the accessibility of holocellulose to enzymatic hydrolysis with the least inhibitory compounds being released for subsequent steps of enzymatic hydrolysis and fermentation. Each pretreatment technology has a different specificity against both carbohydrates and lignin and may or may not be efficient for different types of biomasses. Furthermore, it is also desirable to develop pretreatment methods with chemicals that are greener and effluent streams that have a lower impact on the environment. This paper provides an overview of the most important pretreatment methods available, including those that are based on the use of green solvents (supercritical fluids and ionic liquids).