ssEMG assessment of a new tool for the management of 3D vertical dimension of occlusion in prosthetic dental rehabilitations: A case report.

In oral rehabilitation the new dental morphology requires changes in the occlusal relations and in case of whole dental arch restoration also the mandibular position can undergo three-dimensional spatial modifications. Overloads and/or altered distributions of the stresses on the temporomandibular joint, teeth and bones may therefore result with not clearly understood consequences. In the present case report a new tool -Vertical Tester- designed to manage the 3D vertical occlusion during an implant retained full mouth rehabilitation was combined with standardized surface electromyographic (ssEMG) analysis in order to respect the masticatory muscle symmetry and coordination. The Authors conclude that the standardized surface electromyography of the masticatory muscles coupled with custom made centric relation registration device is an easy to use procedure to reduce torsional strains on the oral hard structures.

Indexes of jaw muscle function in asymptomatic individuals with different occlusal features.

This study aims to assess the correlation between indexes of jaw muscle function and dento-skeletal morphology. A sample of 35 temporomandibular disorders-free healthy individuals (10 males, mean age 26.7 ± 9.8 years) underwent surface electromyographic (sEMG) assessment of bilateral masseter and temporalis muscles, to evaluate sEMG activity during maximum voluntary clenching (MVC) with a dedicated device (Easymyo®, T.F.R. Technology, Udine, Italy). Four outcome parameters were assessed for each individual: MCV on cotton rolls; MVC on teeth; chewing on right and left sides; clench/relax test. Electromyographic recordings were assessed based on five standardized indexes of muscle function, to evaluate the degree of muscle asymmetry during static and dynamic function (i.e., percentage overlapping coefficient [POC], Impact, Asymmetry, Activation, and Torque). For each individual, the presence of a number of occlusal and skeletal features was assessed: asymmetry of molar class; deviated incisor midline; deep bite; open bite; and crossbite. Skeletal class and vertical dimension of occlusion were also evaluated. Based on normality distribution of data, t test and analysis of variance, when needed, were used to compare muscle function indexes between individuals with and without the different dento-skeletal features. None of the muscle function indexes (POC, Impact, Asymmetry, Activation, and Torque) was significantly different between individuals with or without the various dental and skeletal features. Gender differences were also not significant (p > 0.05). Despite some minor differences were observed, none of them was significant. Thus, the interaction between form and function is too complex for hypothesizing a simple one-to-one relationship between interarch tooth relationship and muscle function patterns.

Jaw clenching effects in relation to two extreme occlusal features: patterns of diagnoses in a TMD patient population.

OBJECTIVE: The aim of this investigation was to compare the pattern of temporomandibular disorder (TMD) diagnoses in clenching patients with different occlusal features, the null hypothesis being that no between-group differences exist. MATERIALS AND METHODS: Two groups of subjects receiving a jaw clenching diagnosis and having large overjet or anterior open bite (Group A; N=45, 75.5% females, mean age: 38.1 +/- 15.9 years) or normal occlusion (Group B; N=69, 71% females, mean age: 34.6 +/- 13.8 years) were recruited among a TMD patient population and were given Research Diagnostic Criteria for TMD (RDC/TMD) axis I diagnoses, namely, group I muscle disorders, group II disc displacements, and group III arthralgia/osteoarthritis/osteoarthrosis. MAJOR FINDINGS: The distribution of RDC/TMD single and combined group diagnoses was significantly different between the two groups (P<0.05), with Group A subjects showing a higher prevalence of multiple diagnoses (60% versus 43.3%), as well as a higher prevalence of combined RDC/TMD axis I group II and III diagnoses (37.8% versus 20.2%). All TMD signs and symptoms were more frequent in the patients with large overjet or anterior open bite with respect to the patients with normal occlusion. CONCLUSION: In a TMD patient population, jaw clenching may have different consequences in subjects with large overjet or anterior open bite with respect to subjects featuring normal occlusion.

Predictive value of combined clinically diagnosed bruxism and occlusal features for TMJ pain.

Several works showed a decreased role for occlusion in the etiology of temporomandibular disorders (TMD). Nonetheless, it may be hypothesized that occlusion acts as a modulator through which bruxism activities may cause damage to the stomatognathic structures. To test this hypothesis, a logistic regression model was created with the inclusion of clinically diagnosed bruxism and eight occlusal features as potential predictors for temporomandibular joint (TMJ) pain in a sample of 276 consecutive TMD patients. The final logit showed that the percentage of the total log likelihood for TMJ pain explained by the significant factors was small and amounted to 13.2%, with unacceptable levels of sensitivity (16.4%). The parameters overbite > or = 4 mm combined with clinically diagnosed bruxism [OR (odds ratio) 4.62], overjet > or = 5 mm (OR 2.83), and asymmetrical molar relationship combined with clinically diagnosed bruxism (OR 2.77) were those with the highest odds for disease, even though none of those values was significant with respect to confidence intervals. Thus, the hypothesis under evaluation has to be rejected. It is possible that future studies with a higher discriminatory power for the different bruxism activities might be indicated to get deeper into the analysis of the potential mechanisms through which occlusion may play a role, even if small, in the etiology of the different TMD.

Imaging of facial soft tissues in multislice computerized tomography: a new geometric method of analysis and its statistical validation.

OBJECTIVE: The main purpose of this preliminary study was to propose an original analysis of facial soft tissues' depth to detect their topographic variability, which causes are intrinsic (depth) and extrinsic (bone shape and reciprocal correlations with soft tissues themselves). To check the utility and accuracy of the method in recognizing measures' differences, other aims were comparison of two different groups of people and statistical validation. STUDY DESIGN: The study sample was composed of 100 consecutive patients (56 females and 44 males) undergoing a routine CT scanning. The images, obtained through the reference plane of the palate, were post-processed on a PC workstation. A goniometer construction was superimposed and centered on the posterior nasal spine, where a grid of eighteen rays was developed to calculate the superficial soft tissues' depths of the face. To test the validity of the method, three of the rays were measured twice, by the same as by another observer. Step-by-step procedures were attained to get maximum standard in measures' reliability. RESULTS: Superficial soft tissues' depths were obtained and sex differences were analyzed (Student's t and Wilcoxon rank-sum test). The statistical reliability was proven with Bland-Altman statistics and the upper 95% limit of agreement was 1.459 mm for intraobserver repeatability and 1.886 mm for interobserver reproducibility. Validation of the method was proven by intraclass correlation coefficient (0.99 both for repeatability and reproducibility) and mean differences (respectively 0.6% and 0.4%). CONCLUSION: The method appeared easy to be applied, reliable and not observer dependent, so suitable for study single as multiple patients with CT images. Future analyses shall be possible.

Labial morphology: a 3-dimensional anthropometric study.

PURPOSE: To develop a noninvasive 3-dimensional method to evaluate labial morphology and to assess gender-related differences in healthy young adults. MATERIALS AND METHODS: Dental and lip impressions of 11 men and 10 women aged 21 to 34 years, with sound, full, permanent dentition were obtained. The models were digitized and 3-dimensional virtual reproductions obtained. The labial thickness, vermilion area, and volume of the upper and lower lips were measured from the digital reconstructions. The male and female data were compared using Student's t test. RESULTS: The mean lip thickness was significantly larger (P = .02) in men (14.3 mm) than in women (12.3 mm). The lower lip was thicker than the upper lip. The vermilion width was larger in men (75 mm) than in women (70 mm), and no differences were found for vermilion height (10 mm). In the upper lip, the height/width ratio was significantly larger in women (14.1%) than in men (12.3%). The vermilion surface area was slightly larger in men than in women (upper lip area: women, 467 mm(2); men, 501 mm(2); lower lip area: women, 491 mm(2); men, 569 mm(2)). The labial volume was significantly larger in men (upper lip, 2,390 mm(3); lower lip, 2,902 mm(3)) than in women (upper lip, 1,743 mm(3); lower lip, 1,764 mm(3); P = .021). The upper/lower lip area and volume ratios were similar in the 2 genders. CONCLUSIONS: Overall, men had larger lips than women. The inferior lip height/width ratio was similar in both genders, and men had a relatively thinner upper lip than women.

Unilateral masseter muscle hypertrophy: morphofunctional analysis of the relapse after treatment with botulinum toxin.

This is a case of unilateral masseter muscle hypertrophy (MMH) treated with botulinum toxin (NHAI-normalised hemi-facial asymmetry index improvement from 5.48 to 3.04). After 19 months the treatment was repeated because of hypertrophy relapse (NHAI increase up to 6.82). The volume variations in the masseter area were monitored during 25 months using a laser scanner to compute facial volume. In order to relate the cause of hypertrophy and relapse to the presence of parafunctional activities, a nocturnal electromyography (EMG) study was conducted with positive results (nocturnal parafunctions of patients 4074.99 microV to be compared with a control group value of 1644.63 microV). The lack of the left inferior molars and the consequent right occlusal support seemed to justify the hypertrophy of right masseter (MMRight-POC [percent overlapping coefficient] 91.9%). However, the prosthetic rehabilitation did not prevent relapse in the same muscle. The EMG analysis of both the muscular activation (MMRight-POC 66.0% after relapse) and inhibition activity in Maximum Voluntary Clench (MVC) resulted in contradictory conclusions. At present, the available knowledge regarding MMH physiopathology is very limited and does not support a therapeutic rationale for relapse prevention.

Soft tissue facial planes and masticatory muscle function in skeletal Class III patients before and after orthognathic surgery treatment.

PURPOSE: To noninvasively assess the facial soft tissues and masticatory muscle function before and after orthognathic surgery. PATIENTS AND METHODS: Eight patients aged 18 to 36 years, all with a skeletal Class III and mandibular asymmetry, were assessed both before (on average, 2 months) and after (on average, 10.5 months) surgical intervention (mandibular reduction by sagittal split osteotomy and Le Fort I maxillary advancement). From the 3-dimensional coordinates of soft tissue facial landmarks, the inclination of facial planes was calculated. Surface electromyography of the masticatory muscles was performed and indices of muscular activity computed. Data were compared with reference values collected in healthy subjects of the same gender, age, and ethnic group. RESULTS: Before surgery, facial planes were significantly less horizontal (frontal plane) than in the reference subjects (P < .05). The sagittal projection of the mandibular plane was more inclined relative to the norm (P < .001). During teeth clenching, all indices of standardized muscular symmetry, torque, and activity (P < .05) were smaller than the reference values. After surgical treatment, the inclinations of facial planes became more homogenous (P < .05). The inclination of the frontal and sagittal planes came next to the reference values, but still differed significantly in the patients (P < .05). The mean symmetry index of masseter muscle, torque coefficient, and pooled muscle activity increased, but the patient values remained significantly under the reference values (P < .05). CONCLUSION: The morphologic and functional approach used in this study proved useful as a complementary diagnostic aid, enabling quantitative evaluation of the final results of surgery, without submitting the patients to invasive procedures.

Occlusal morphology 1 year after orthodontic and surgical-orthodontic therapy.

OBJECTIVE: To evaluate morphologic characteristics of occlusion (contact points, contact areas, and frequency of contact) in clinically successful patients 1 year after orthodontic and surgical-orthodontic therapy followed by passive retention. MATERIALS AND METHODS: Twenty-two orthodontic and 18 surgical-orthodontic patients were analyzed. All patients were treated with standard edgewise technique by the same orthodontist. Contact points and areas were evaluated using a new method of digital image analysis of occlusal impressions. Polivinylsyloxan impressions were taken, scanned, and turned into gray-scale images. The physic relationship of light absorbance through the polivinylsyloxan for known thickness was calculated to determine contact areas (less than 50 microm of thickness) and near contact areas (less than 350 microm of thickness). RESULTS: The contact area was significantly larger in the orthodontic than in the surgical-orthodontic patients (Student's t-test, P < .05). The surgical-orthodontic group had significantly fewer contact points than the orthodontic group only at 150 microm of thickness. In both groups of patients, the first molar had the largest contact surface. Occlusal support was distributed mainly in the posterior regions with an important role involving the first molars. CONCLUSION: Surgical-orthodontic patients appear to have smaller contact surfaces and fewer contact points than orthodontic patients do. However, there were no differences in the number of teeth in contact with opposing teeth.

A 3-Dimensional Facial Morpho-Dynamic Database in the development of a prediction model in orthognathic surgery.

BACKGROUND: Current methodologies in the prevision of post-surgical features of the face in orthognathic surgery are mainly 2-D. An improvement is certainly given by the introduction of CT, but its acceptance is controversial due to its high biological cost. As an alternative, in this study an effective procedure for the construction of a 3-D textured digital model of the face and dental arches of patients with dentofacial malformations using a 3-D laser scanner at no biological cost is presented. METHODS: A 3-D Laser scanner Konica-Minolta VIVID 910 is used to obtain multiple scans from different perspectives of the face of patients with dentofacial malocclusions requiring orthognathic surgery. These multiple views are then recombined, integrating also the maxillary and mandibular arch plaster casts, to obtain the 3-D textured model of the face and occlusion with minimal error. RESULTS: A viable methodology was identified for the face and occlusal modeling of orthognathic patients and validated in a test case, confirming its effectiveness: the 3-D model created accurately describes the actual features of the patient's face; the proposed methodology can be easily applied in the clinical routine to accurately record the steps of the surgical treatment and to perform accurate anthropometric analyses of the facial morphology, and thus constitute the necessary database for the development of previsional tools in orthognathic surgery. CONCLUSIONS: The proposed method is effective in recording all the morphological facial features of patients with dentofacial malformations, to develop a facial modification database and tools for virtual surgery.

Three-dimensional computerized anthropometry of the nose: landmark representation compared to surface analysis.

OBJECTIVE: To compare three-dimensional nasal measurements directly made on subjects to those made on plaster casts, and nasal dimensions obtained with a surface-based approach to values obtained with a landmark representation. METHODS: Soft-tissue nasal landmarks were directly digitized on 20 healthy adults. Stone casts of their noses were digitized and mathematically reconstructed using nonuniform rational B-splines (NURBS) curves. Linear distances, angles, volumes and surface areas were computed using facial landmarks and NURBS-reconstructed models (surface-based approach). RESULTS: Measurements on the stone casts were somewhat smaller than values obtained directly from subjects (differences between -0.05 and -1.58 mm). Dahlberg's statistic ranged between 0.73 and 1.47 mm. Significant (p < .05) t values were found for 4 of 15 measurements. The surface-based approach gave values 3.5 (volumes) and 2.1 (surface area) times larger than those computed with the landmark-based method. The two values were significantly related (volume, r = 0.881; surface, r = 0.924; p < .001), the resulting equations estimated actual values well (mean difference, volume -0.01 mm3, SD 1.47, area 0.05 cm(2), SD 1.44); limits of agreement between -2.89 and 2.87 mm3 (volume); -2.88 and 2.78 cm2 (area). CONCLUSIONS: Considering the characteristics of the two methods, and for practical purposes, nasal distances and angles obtained on plaster models were comparable to digital data obtained directly from subjects. Surface areas and volumes were best obtained using a surface-based approach, but could be estimated using data provided by the landmark representation.

Soft tissue facial volumes and shape in skeletal Class III patients before and after orthognathic surgery treatment.

BACKGROUND: To obtain the best surgical results in orthognathic surgery, treatment planning and the evaluation of results should be performed on measurable three-dimensional reproductions of the face of the patients, and compared to reference subjects. METHODS: Seven women aged 18-35 years, all with a skeletal Class III and mandibular asymmetry, were assessed both before (on average, 2 months) and after (on average, 10.7 months) surgical intervention (mandibular reduction by sagittal split osteotomy and LeFort I maxillary advancement). The three-dimensional coordinates of 50 soft tissue facial landmarks (face, eyes, nose, mouth and lips, ears) were collected with a noninvasive, electromagnetic digitizer; facial volumes were estimated, and compared to reference values collected in 87 healthy women of the same age and ethnic group. Inter-individual modifications in facial shape were also assessed. RESULTS: Before surgery the patients had smaller faces than the reference women, with larger lower lips and noses. A large within-group variability was found. Surgical treatment significantly reduced total facial volume and mandibular volume, increased total and upper lip volumes (Student's t test, p<0.05), and made all values more homogenous within the group. Shape differences were significantly larger before than after surgery. On average, right side gonion was the landmark that moved the most, closely followed by menton, while the tragi and ala nasi moved the least. The three-dimensional approach used in this study enabled quantitative evaluation of the final soft tissue results of surgery, without submitting the patients to invasive procedures.

Three-dimensional facial morphometry in skeletal Class III patients. A non-invasive study of soft-tissue changes before and after orthognathic surgery.

Nine patients aged between 18 and 35 years who had severe skeletal Class III malocclusion and moderate-to-severe mandibular asymmetry, were assessed by a non-invasive, landmark-based, three-dimensional system before and after mandibular reduction by sagittal split osteotomy and LeFort I maxillary advancement. The three-dimensional coordinates of 50 facial soft tissue landmarks were collected, and a series of anthropometric measurements was calculated and compared with reference values from 240 healthy subjects of similar sex, age, and ethnic group. Patients were more asymmetrical than normal subjects before the operations, particularly in the gonion. Postoperatively, total and lateral asymmetry was considerably reduced. The three-dimensional approach was a valuable complementary diagnostic aid that enabled quantitative evaluation of the final soft-tissue results without invasive procedures.