Volatile organic compounds and particulate matter in child care facilities in the District of Columbia: Results from a pilot study.

BACKGROUND: Many young children in the U.S. spend a significant portion of their day in child care facilities where they may be exposed to contaminants linked to adverse health effects. Exposure data on volatile organic compounds (VOCs) and particulate matter (PM) in these settings is scarce. OBJECTIVE: To guide the design of a larger exposure assessment study in urban child care facilities, we conducted a pilot study in which we characterized indoor concentrations of select VOCs and PM. METHODS: We recruited 14 child care facilities in the District of Columbia (Washington, DC) and measured indoor concentrations of seven VOCs (n=35 total samples; 2-5 samples per facility): benzene, carbon tetrachloride, chloroform, ethylbenzene, o-xylene, p-xylene, and toluene in all facilities; and collected real-time PM measurements in seven facilities. We calculated descriptive statistics for contaminant concentrations and computed intraclass correlation coefficients (ICC) to evaluate the variability of VOC levels indoors. We also administered a survey to collect general health information on the children attending these facilities, and information on general housekeeping practices and proximity of facilities to potential sources of target contaminants. RESULTS: We detected six of the seven VOCs in the majority of child care facilities with detection frequencies ranging from 71% to 100%. Chloroform and toluene were detected in all samples. Median (range) concentrations for toluene, chloroform, benzene, o-xylene, ethylbenzene, and carbon tetrachloride were: 5.6µg/m(3) (0.6-16.5µg/m(3)), 2.8µg/m(3) (0.4-53.0µg/m(3)), 1.4µg/m(3) (below the limit of detection or

Angiotensin II is bound to both receptors AT1 and AT2, parallel to the transmembrane domains and in an extended form.

UNLABELLED: We have applied photoaffinity labelling methods combined with site-directed mutagenesis towards the two principal angiotensin II (AnglI) receptors AT1 and AT2 in order to determine contact points between AngII and the two receptors. We have first identified the receptor contact points between an N- and a C-terminal residue of the AngII molecule and the AT1 receptor and constructed with this stereochemical restriction a molecular model of AT1. A similar approach with a modified procedure of photoaffinity labelling has allowed us now to determine contact points also in the AT2 receptor. Molecular modelling of AT2 on the rhodopsin scaffold and energy minimisation of AngII binding into this AT2 model produced a model strikingly similar to the AT11 structure. Superposition of the experimentally obtained contact points of AngII with AT2 upon this model revealed excellent congruence between the experimental and modelling results. CONCLUSIONS: (i) athough AT1 and AT2 have quite low sequence homology, they both bind AngII with similar affinity and in an almost identical fashion, as if the ligand dictates the way it has to be bound, and (ii) in its bound form, AngII adopts an extended conformation in both AT1 and AT2, contrary to all previous predictions.

Assays for radiolabel-photoaffinity labeling of Angiotensin receptors.

Photoaffinity labeling is a useful method to covalently bind two interacting moieties whether they be substrate and enzyme or ligand and receptor. Irreversibly labeling any particular molecule is a practical way of detecting the latter throughout the course of a characterization or a purification procedure.

Angiotensin II analogues with sulphur-containing side-chains in position 5. A structure-activity relationship study.

Four sets of angiotensin II (AngII) analogues with position 5 modifications, two agonist series with either Asp or Sar in position 1 and L-Phe in position 8, and two antagonist series with again Asp or Sar in position 1 and Leu in position 8 were synthesized. Modifications in positions 5 were introduced successively: Ile, Nle, Met, S-ethyl Cys, S-n-propyl-Cys, S-n-butyl Cys, S-t-butyl Cys and S-benzyl Cys in all four series. The study was undertaken in order to investigate the 5-position residue of AngII by replacing the hydrophobic side-chain by another containing an electrophilic moiety. The analogues were synthesised by solid phase synthesis using the Boc/Bzl or Fmoc/But strategy. All analogues were evaluated by their binding properties to the AT1 receptor on bovine adrenocortical membranes (bAT1). The results indicate that AngII analogues bind, irrespective of their agonistic or antagonistic nature or of their position 1 modification, in a similar manner and that position 5 modifications without beta-branching behave in an additive manner towards their affinity.

N- and C-terminal structure-activity study of angiotensin II on the angiotensin AT2 receptor.

The predominant angiotensin II receptor expressed in the human myometrium is the angiotensin AT2 receptor. This preparation was used for a structure-activity relationship study on angiotensin II analogues modified in positions 1 and 8. The angiotensin AT2 receptor present on human myometrium membranes displayed a high affinity (pKd = 9.18) and was relatively abundant (53-253 fmol/mg of protein). The pharmacological profile was typical of an angiotensin AT2 receptor with the following order of affinities: (angiotensin III > or = angiotensin II > angiotensin I > PD123319 > angiotensin-(1-7) > angiotensin-(1-6) approximately angiotensin IV >> Losartan). Modifications of the N-terminal side chain and of the primary amine of angiotensin II were evaluated. Neutralisation of the methylcarboxylate (Asp) to a methylcarboxamide (Asn) or to a hydroxymethyl (Ser) or substitution for a methylsulfonate group (cysteic acid) improved the affinity. Extension from methylcarboxylate (Asp) to ethylcarboxylate (Glu) did not affect the affinity. Introduction of larger side chains such as the bulky p-benzoylphenylalanine (p-Bpa) or the positively charged Lys did not substantially affect the affinity. Complete removal of the side chain (angiotensin III), however, resulted in a significant affinity increase. Removal or acetylation of the primary amine of angiotensin II did not noticeably influence the affinity. Progressive alkylation of the primary amine significantly increased the affinity, betain structures being the most potent. It appears that quite important differences exist between the angiotensin AT1 and AT2 receptors concerning their pharmacological profile towards analogues of angiotensin II modified in position 1. On position 8 of angiotensin II, a structure-activity relationship on the angiotensin AT2 receptor was quite similar to that observed with angiotensin AT1 receptor. Bulky, hydrophobic aromatic residues displayed affinities similar to or even better than [Sarcosine1]angiotensin II. Aliphatic residues, especially those of reduced size, caused a significant decrease in affinity especially [Sarcosine1, Gly8]angiotensin II who showed a 30-fold decrease. Introduction of a positive charge (Lys) at position 8 reduced the affinity even further. Stereoisomers in position 8 (L-->D configuration) also induced lower affinities. The angiotensin AT2 receptor display a structure-activity relationship similar to that observed on the AT1 receptor for the C-terminal position of the peptide hormone. Position 1 structure-activity relationships are however fundamentally different between the angiotensin AT1 and AT2 receptor.

Angiotensin analogues palmitoylated in positions 1 and 4.

Lipidated angiotensin II (Ang) agonists and antagonists were synthesized and evaluated for their biological activities for eventual use an antimyoproliferative agents. Solid phase peptide synthesis was used for the assembly of the peptides with the Fmoc protection scheme. N-Acetyl-Ser1 Ang was palmitoylated on the serine hydroxyl function. The nonpalmitoylated analogue retained one-third of Ang's affinity toward the AT1 receptor on bovine adrenal cortex membranes, and the palmitoylated analogue was essentially inactive. Upon enzymatic lipolysis or mild saponification of the palmitoylated peptide, biological activity was restored. An analogous compound of Ang, N-acetyl-Ser1,beta-D-naphthylalanine8 ([NAcSer1,D-Nal8]Ang), was a pure antagonist on rabbit aorta but with lower affinity. Its O-palmitoylated form was inactive as well but was easily converted to the nonlipidated active form by lipolysis or saponification. Direct palmitoylation of [sarcosine1]Ang with palmitoyl chloride was obtained on the free phenolic hydroxyl of Tyr4 on solid phase on an otherwise fully protected peptide. This lipopeptide was fully active, was comparable to [Sar1]Ang, and exhibited strongly prolonged activity. Lipolysis and saponification under mild conditions yielded standard [Sar1]Ang. The corresponding [Sar1,D-Nal8]Ang was a potent and very long-lasting antagonist (pA2 = 8.1), and its analogous palmitoyl phenyl ester in position 4 was active in its palmitoylated form (antagonist) and, again, returned to the nonlipidated form upon saponification or lipolysis. [Sar1,Tyr4(O-octadecyl)]Ang, an analogue to Tyr-palmitoylated [Sar1]Ang with an octadecyl phenyl ether in position 4, was also prepared. Surprisingly, the ether compound was inactive. Premature hydrolysis of the palmitoyl phenyl ester peptide was excluded by HPLC analysis, and the activity of the ester peptide is attributed to a putative hydrogen bond that may be critical for biological activity. The discovery of potent biologically active lipidated antagonists of Ang gives access to potential antimyoproliferative agents with numerous application possibilities.

Improved activity of a new angiotensin receptor antagonist by an injectable spray-dried polymer microsphere preparation.

PURPOSE: To characterize and evaluate in vitro and in vivo the release mechanisms involved in spray-dried biodegradable microspheres having different Poly(D,L-lactide) blend formulations and containing an antihypertensive drug (L-158,809). METHODS: Microspheres and blended polymers were characterized by DSC, SEM, confocal laser microscopy and size analysis. In vitro release studies were evaluated by using microspheres made from various blends of high and low molecular weight polymer. In vivo studies were evaluated by L-158,809 antagonist AT1 function versus the shift of the normal dose-response curve of blood pressure induced by Angiotensine II. RESULTS: The average yield of L-158,809 microspheres (10% (w/w)) was 95% of the theoretical loading. The average diameter of the microspheres was from 1 to 3 micrometers. In all release experiments, a significant burst effect (< 15%) was observed followed by a near zero-order release kinetics. In vivo studies with two different formulations show a strong shift of angiotensin II dose-response curve. CONCLUSIONS: The release kinetics and photomicrographs suggest that the system is best described as a multi-parameter controlled released system in which the drug is molecularly dispersed. In vivo results demonstrating the controlled release of L-158,809.

Characterization of a specific binding site for angiotensin II in chicken liver.

We have characterized a specific binding site for angiotensin II (AngII) in chicken liver membranes. Pseudo-equilibrium studies at 22 degrees C for 30 min have shown that this binding site recognizes AngII with a high affinity (pKD of 8.13 +/- 0.21). The binding sites are saturable and relatively abundant (maximal binding capacity varies from 0.318 to 0.88 pmol/mg of protein). Nonequilibrium kinetic analyses at 22 degrees C revealed a calculated kinetic pKD of 8.77 +/- 0.20. The binding site is pharmacologically distinct from the classic AngII receptors AT1 and AT2. Competitive binding studies with chicken liver membranes demonstrated the following rank order of effectiveness: AngII (human; Asp-Arg-Val-Tyr-Ile-His-Pro-Phe) > AngI(Asp-Arg-Val-Tyr-Ile-His-Pro-Phe-His-Leu) > AngIII(Arg-Val-Tyr-Ile-His-Pro-Phe) > AngIV (Val-Tyr-Ile-His-Pro-Phe) > Ang(1-7) (Asp-Arg-Val-Tyr-Ile-His-Pro) > PD123319 (1-[4(dimethylamino)3-methylphenyl] methyl-5-(diphenylacetyl)-4,5,6,7-tetrahydro-1H-imidazo [4,5-c]pyridine-6-carboxylic acid) > DuP753 (2-n-butyl-4-chloro-5 hydroxymethyl-1-[(2'-1H-tetrazol-5-yl)biphenyl-4-yl)methyl] imidazole. This atypical AngII binding site (chicken AT) was sensitive to increasing concentrations of DTT and Mn2+. The structure-activity relationship on position 1 of AngII showed that the primary N-terminal amine was essential for binding affinity ([Asp1]AngII > [Suc1]AngII > or = [Sar1]AngII), but modifications of the side chain in position 1 had less influence on the affinity ([Gly1]AngII > [Cys1]AngII approximately [aminoisobutyryl1]AngII approximately [Ser1]AngII > > > [Sar1]AngII). The presence of substantial quantities of this binding site in chicken liver membranes suggests the possibility that the chicken AT may play an important, yet unrecognized, role in the renin-angiotensin system.

What can angiotensin antagonists do that converting-enzyme inhibition can't: the case of post-angioplastic restenosis.

The introduction of nonpeptide angiotensin II antagonists in clinical use has necessarily led to comparison with the various and clinically established angiotensin converting enzyme inhibitors. In essence, losartan, the first approved angiotensin receptor antagonist, has a clinical profile highly similar to that of the converting-enzyme inhibitors, although much higher doses are required but with the advantage of no dry cough. On the other hand, the emergence of the concept of inverse agonism on other receptor systems has led to the search for pathological situations mediated through constitutive receptor activity as well as antagonists with inverse agonistic properties on the angiotensin receptor. Basic research on angiotensin peptide antagonists has led to the identification of molecular characteristics that produce antagonism. The combination of these characteristics then led to angiotensin antagonists that possessed a long in vivo duration of action. Studies with angiotensin converting enzyme inhibitors and nonpeptide antagonists on animal models of post-angioplastic restenosis revealed that both classes of compounds have similar partial efficacy on the inhibition of neointima formation. A peptide antagonist produced on the rat carotid model a complete inhibition of neointima formation. This increased efficacy is now tentatively attributed to potential inverse agonistic activity of this peptide antagonist. This concept would give angiotensin antagonists therapeutic opportunities where convertase inhibitors should be ineffective.

Novel cyclic analogs of angiotensin II with cyclization between positions 5 and 7: conformational and biological implications.

To study the conformational features of molecular recognition of angiotensin II (Asp1-Arg2-Val3-Tyr4-Val/IIe5-His6-Pro7-Phe8, AII), the synthesis and biological testing of several cyclic analogs of AII cyclized between positions 5 and 7 have been performed. The synthesized analogs were Sar1-Arg2-Val3-Tyr4-cyclo(Cys5-His6-Pen7)-Phe8 (3), Sar1-Arg2-Val3-Tyr4-cyclo(Asp5-His6-Apt7)-Phe8 (4), Sar1-Arg2-Val3-Tyr4-cyclo(Glu5-His6-Apt7)-Phe8 (5), Sar1-Arg2-Val3-Tyr4-cyclo-(Cys5-His6-Mpt7)-Phe8 (6), Sar1-Arg2-Val3-Tyr4-cyclo(Cys5-His6-Mpc7)-Phe8 (7), Sar1-Arg2-Val3-Tyr4-cyclo(Hcy5-His6-Mpt7)-Phe8 (8), and Sar1-Arg2-Val3-Tyr4-cyclo(Hcy5-His6-Mpc7)-Phe8 (9), where Apt stands for 4-amino-trans-proline, and Mpt and Mpc for 4-mercapto-trans- and -cis-prolines, respectively. Compound (9) showed good affinity at AT-1 receptors, namely a KD = 20 nM. In functional assays, it showed the characteristics of a weak partial agonist with a relative affinity of 0.26% of that for AII and an intrinsic efficacy, alpha E, of 0.42. Molecular modeling suggested a possible explanation for this finding: the relatively strong binding and the weak partial agonistic activity of compound 9 are due to interaction with AT-1 receptor of only two functionally important groups, namely, the side chains of the His6 and Phe8 residues.

PAF activation of a voltage-gated R-type Ca2+ channel in human and canine aortic endothelial cells.

By the use of fura-2 and digital imaging techniques, [K]o depolarization or PAF (10(-9) M) were shown to induce a sustained increase of [Ca]i in human or canine single aortic vascular endothelial cells (VEC) that was insensitive to nifedipine but sensitive to (-)-PN200-110 or to lowering of [Ca]o. The PAF-induced effect on [Ca]i was blocked by the PAF receptor antagonist, WEB2170. Our results suggest that [K]o depolarization and PAF increase [Ca]i via the activation of R-type Ca2+ channels.