Chemical and enzymatic synthesis of tRNAs for high-throughput crystallization.

Preparation of large quantities of RNA molecules of a defined sequence is a prerequisite for biophysical analysis, and is particularly important to the determination of high-resolution structure by X-ray crystallography. We describe improved methods for the production of multimilligram quantities of homogeneous tRNAs, using a combination of chemical synthesis and enzymatic approaches. Transfer RNA half-molecules with a break in the anticodon loop were chemically synthesized on a preparative scale, ligated enzymatically, and cocrystallized with an aminoacyl-tRNA synthetase, yielding crystals diffracting to 2.4 A resolution. Multimilligram quantities of tRNAs with greatly reduced 3' heterogeneity were also produced via transcription by T7 RNA polymerase, utilizing chemically modified DNA half-molecule templates. This latter approach eliminates the need for large-scale plasmid preparations, and yields synthetase cocrystals diffracting to 2.3 A resolution at much lower RNA:protein stoichiometries than previously required. These two approaches developed for a tRNA-synthetase complex permit the detailed structural study of "atomic-group" mutants.

Catalytic efficiency and sequence selectivity of a restriction endonuclease modulated by a distal manganese ion binding site.

Crystal structures of EcoRV endonuclease bound in a ternary complex with cognate duplex DNA and manganese ions have previously revealed an Mn(2+)-binding site located between the enzyme and the DNA outside of the dyad-symmetric GATATC recognition sequence. In each of the two enzyme subunits, this metal ion bridges between a distal phosphate group of the DNA and the imidazole ring of His71. The new metal- binding site is specific to Mn(2+) and is not occupied in ternary cocrystal structures with either Mg(2+) or Ca(2+). Characterization of the H71A and H71Q mutants of EcoRV now demonstrates that these distal Mn(2+) sites significantly modulate activity toward both cognate and non-cognate DNA substrates. Single-turnover and steady-state kinetic analyses show that removal of the distal site in the mutant enzymes increases Mn(2+)-dependent cleavage rates of specific substrates by tenfold. Conversely, the enhancement of non-cognate cleavage at GTTATC sequences by Mn(2+) is significantly attenuated in the mutants. As a consequence, under Mn(2+) conditions EcoRV-H71A and EcoRV-H71Q are 100 to 700-fold more specific than the wild-type enzyme for cognate DNA relative to the GTTATC non-cognate site. These data reveal a strong dependence of DNA cleavage efficiency upon metal ion-mediated interactions located some 20 A distant from the scissile phosphodiester linkages. They also show that discrimination of cognate versus non-cognate DNA sequences by EcoRV depends in part on contacts with the sugar-phosphate backbone outside of the target site.

Alternative designs for construction of the class II transfer RNA tertiary core.

The structural requirements for assembly of functional class II transfer RNA core regions have been examined by sequence analysis and tested by reconstruction of alternative folds into the tertiary domain of Escherichia coli tRNA(2)Gln. At least four distinct designs have been identified that permit stable folding and efficient synthetase recognition, as assessed by thermal melting profiles and glutaminylation kinetics. Although most large variable-arm tRNAs found in nature possess an enlarged D-loop, lack of this feature can be compensated for by insertion of nucleotides either 3' to the variable loop or within the short acceptor/D-stem connector region. Rare pyrimidines at nt 9 in the core region can be accommodated in the class II framework, but only if specific nucleotides are present either in the D-loop or 3' to the variable arm. Glutaminyl-tRNA synthetase requires one or two unpaired uridines 3' to the variable arm to efficiently aminoacylate several of the class II frameworks. Because there are no specific enzyme contacts in the tRNAGln core region, these data suggest that tRNA discrimination by GlnRS depends in part on indirect readout of RNA sequence information.

Tertiary core rearrangements in a tight binding transfer RNA aptamer.

Guided by an in vitro selection experiment designed to obtain tight binding aptamers of Escherichia coli glutamine specific tRNA (tRNAGln) for glutaminyl-tRNA synthetase (GlnRS), we have engineered a tRNA mutant in which the five-nucleotide variable loop sequence 5'-44CAUUC48-3' is replaced by 5'-44AGGU48-3'. This mutant tRNA binds to GlnRS with 30-fold improved affinity compared to the wild type. The 2.7 A cocrystal structure of the RNA aptamer-GlnRS complex reveals major rearrangements in the central tertiary core of the tRNA, while maintaining an RNA-protein interface identical to the wild type. The repacked RNA core features a novel hydrogen bonding arrangement of the trans Levitt pair G15-U48, a new sulfate binding pocket in the major groove, and increased hydrophobic stacking interactions among the bases. These data suggest that enhanced protein binding to a mutant globular RNA can arise from stabilization of RNA tertiary interactions rather than optimization of RNA-protein contacts.

Influence of transfer RNA tertiary structure on aminoacylation efficiency by glutaminyl and cysteinyl-tRNA synthetases.

The position of the tertiary Levitt pair between nucleotides 15 and 48 in the transfer RNA core region suggests a key role in stabilizing the joining of the two helical domains, and in maintaining the relative orientations of the D and variable loops. E. coli tRNA(Gln) possesses the canonical Pu15-Py48 trans pairing at this position (G15-C48), while the tRNA(Cys) species from this organism instead features an unusual G15-G48 pair. To explore the structural context dependence of a G15-G48 Levitt pair, a number of tRNA(Gln) species containing G15-G48 were constructed and evaluated as substrates for glutaminyl and cysteinyl-tRNA synthetases. The glutaminylation efficiencies of these mutant tRNAs are reduced by two to tenfold compared with native tRNA(Gln), consistent with previous findings that the tertiary core of this tRNA plays a role in GlnRS recognition. Introduction of tRNA(Cys) identity nucleotides at the acceptor and anticodon ends of tRNA(Gln) produced a tRNA substrate which was efficiently aminoacylated by CysRS, even though the tertiary core region of this species contains the tRNA(Gln) G15-C48 pair. Surprisingly, introduction of G15-G48 into the non-cognate tRNA(Gln) tertiary core then significantly impairs CysRS recognition. By contrast, previous work has shown that CysRS aminoacylates tRNA(Cys) core regions containing G15-G48 with much better efficiency than those with G15-C48. Therefore, tertiary nucleotides surrounding the Levitt pair must significantly modulate the efficiency of aminoacylation by CysRS. To explore the detailed nature of the structural interdependence, crystal structures of two tRNA(Gln) mutants containing G15-G48 were determined bound to GlnRS. These structures show that the larger purine ring of G48 is accommodated by rotation into the syn position, with the N7 nitrogen serving as hydrogen bond acceptor from several groups of G15. The G15-G48 conformations differ significantly compared to that observed in the native tRNA(Cys) structure bound to EF-Tu, further implicating an important role for surrounding nucleotides in maintaining the integrity of the tertiary core and its consequent ability to present crucial recognition determinants to aminoacyl-tRNA synthetases.

Crystallographic snapshots along a protein-induced DNA-bending pathway.

Two new high-resolution cocrystal structures of EcoRV endonuclease bound to DNA show that a large variation in DNA-bending angles is sampled in the ground state binary complex. Together with previous structures, these data reveal a contiguous series of protein conformational states delineating a specific trajectory for the induced-fit pathway. Rotation of the DNA-binding domains, together with movements of two symmetry-related helices binding in the minor groove, causes base unstacking at a key base-pair step and propagates structural changes that assemble the active sites. These structures suggest a complex mechanism for DNA bending that depends on forces generated by interacting protein segments, and on selective neutralization of phosphate charges along the inner face of the bent double helix.

Crystallization and preliminary diffraction analysis of the HincII restriction endonuclease-DNA complex.

Crystals of the 60 kDa dimeric HincII restriction enzyme bound to a 12 base-pair dyad-symmetric duplex DNA carrying the specific 5'-GTCGAC recognition site have been obtained. Crystals grew by hanging-drop vapor diffusion from solutions containing polyethylene glycol 4000 as precipitating agent. The rod-shaped crystals belong to space group I222 (or I2(1)2(1)2(1)), with unit-cell dimensions a = 66.9, b = 176.7, c = 256.0 A. There are most likely to be two dimeric complexes in the asymmetric unit. A complete native data set has been collected from a high-energy synchrotron source to a resolution of 2.5 A at 100 K, with an R(merge) of 4.8%.

Divalent metal dependence of site-specific DNA binding by EcoRV endonuclease.

Measurements of binding equilibria of EcoRV endonuclease to DNA, for a series of base-analogue substrates, demonstrate that expression of sequence selectivity is strongly enhanced by the presence of Ca2+ ions. Binding constants were determined for short duplex oligodeoxynucleotides containing the cognate DNA site, three cleavable noncognate sites, and a fully nonspecific site. At pH 7.5 and 100 mM NaCl, the full range of specificity from the specific (tightest binding) to nonspecific (weakest binding) sites is 0.9 kcal/mol in the absence of metal ions and 5.8 kcal/mol in the presence of Ca2+. Precise determination of binding affinities in the presence of the active Mg2+ cofactor was found to be possible for substrates retaining up to 1.6% of wild-type activity, as determined by the rate of phosphoryl transfer. These measurements show that Ca2+ is a near-perfect analogue for Mg2+ in binding reactions of the wild-type enzyme with DNA base-analogue substrates, as it provides identical DeltaDeltaG degrees bind values among the cleavable noncognate sites. Equilibrium dissociation constants of wild-type and base-analogue sites were also measured for the weakly active EcoRV mutant K38A, in the presence of either Mg2+ or Ca2+. In this case, Ca2+ allows expression of a greater degree of specificity than does Mg2+. DeltaDeltaG degrees bind values of K38A toward specific versus nonspecific sites are 6.1 kcal/mol with Ca2+ and 3.9 kcal/mol with Mg2+, perhaps reflecting metal-specific conformational changes in the ground-state ternary complexes. The enhancement of binding specificity provided by divalent metal ions is likely to be general to many restriction endonucleases and other metal-dependent nucleic acid-modifying enzymes. These results strongly suggest that measurements of DNA binding affinities for EcoRV, and likely for many other restriction endonucleases, should be performed in the presence of divalent metal ions.

Catalytic roles of divalent metal ions in phosphoryl transfer by EcoRV endonuclease.

The rate constant for the phosphoryl transfer step in site-specific DNA cleavage by EcoRV endonuclease has been determined as a function of pH and identity of the required divalent metal ion cofactor, for both wild-type and T93A mutant enzymes. These measurements show bell-shaped pH-rate curves for each enzyme in the presence of Mg2+ as a cofactor, indicating general base catalysis for the nucleophilic attack of hydroxide ion on the scissile phosphate, and general acid catalysis for protonation of the leaving 3'-O anion. The kinetic data support a model for phosphoryl transfer based on wild-type and T93A cocrystal structures, in which the ionizations of two distinct metal-ligated waters respectively generate the attacking hydroxide ion and the proton for donation to the leaving group. The model concurs with recent observations of two metal ions bound in the active sites of the type II restriction endonucleases BamHI and BglI, suggesting the possibility of a similar catalytic mechanism functioning in many or all members of this enzyme family.

Crystallization and preliminary diffraction analysis of Escherichia coli cysteinyl-tRNA synthetase.

Crystals of the 52 kDa monomeric Escherichia coli cysteinyl-tRNA synthetase complexed with ATP and cysteine have been grown by hanging-drop vapor diffusion from solutions containing ammonium sulfate as the precipitating agent. The crystals form long hexagonal rods in the space group P321 with unit-cell dimensions a = b = 82.3, c = 168.9 A. There is one enzyme molecule in the asymmetric unit. A complete native data set has been collected from a rotating-anode source to a resolution of 2.7 A at 103 K, with an Rmerge of 6.7%.

An engineered class I transfer RNA with a class II tertiary fold.

Structure-based engineering of the tertiary fold of Escherichia coli tRNA(Gln)2 has enabled conversion of this transfer RNA to a class II structure while retaining recognition properties of a class I glutamine tRNA. The new tRNA possesses the 20-nt variable stem-loop of Thermus thermophilus tRNA(Ser). Enlargement of the D-loop appears essential to maintaining a stable tertiary structure in this species, while rearrangement of a base triple in the augmented D-stem is critical for efficient glutaminylation. These data provide new insight into structural determinants distinguishing the class I and class II tRNA folds, and demonstrate a marked sensitivity of glutaminyl-tRNA synthetase to alteration of tRNA tertiary structure.

Structural and energetic origins of indirect readout in site-specific DNA cleavage by a restriction endonuclease.

Specific recognition by EcoRV endonuclease of its cognate, sharply bent GATATC site at the center TA step occurs solely via hydrophobic interaction with thymine methyl groups. Mechanistic kinetic analyses of base analog-substituted DNAs at this position reveal that direct readout provides 5 kcal mol(-1) toward specificity, with an additional 6-10 kcal mol(-1) arising from indirect readout. Crystal structures of several base analog complexes show that the major-groove hydrophobic contacts are crucial to forming required divalent metal-binding sites, and that indirect readout operates in part through the sequence-dependent free-energy cost of unstacking the center base-pair step of the DNA.

Metal ion-mediated substrate-assisted catalysis in type II restriction endonucleases.

The 2.15-A resolution cocrystal structure of EcoRV endonuclease mutant T93A complexed with DNA and Ca2+ ions reveals two divalent metals bound in one of the active sites. One of these metals is ligated through an inner-sphere water molecule to the phosphate group located 3' to the scissile phosphate. A second inner-sphere water on this metal is positioned approximately in-line for attack on the scissile phosphate. This structure corroborates the observation that the pro-SP phosphoryl oxygen on the adjacent 3' phosphate cannot be modified without severe loss of catalytic efficiency. The structural equivalence of key groups, conserved in the active sites of EcoRV, EcoRI, PvuII, and BamHI endonucleases, suggests that ligation of a catalytic divalent metal ion to this phosphate may occur in many type II restriction enzymes. Together with previous cocrystal structures, these data allow construction of a detailed model for the pretransition state configuration in EcoRV. This model features three divalent metal ions per active site and invokes assistance in the bond-making step by a conserved lysine, which stabilizes the attacking hydroxide ion nucleophile.

Recognition of flanking DNA sequences by EcoRV endonuclease involves alternative patterns of water-mediated contacts.

The 2.1-A cocrystal structure of EcoRV endonuclease bound to 5'-CGGGATATCCC, in a crystal lattice isomorphous with the cocrystallized undecamer 5'-AAAGATATCTT previously determined, shows novel base recognition in the major groove of the DNA flanking the GATATC target site. Lys104 of the enzyme interacts through water molecules with the exocyclic N-4 amino groups of flanking cytosines. Steric exclusion of water molecule-binding sites by the 5-methyl group of thymine drives the adoption of alternative water-mediated contacts with AT versus GC flanks. This structure provides a rare example of structural adaptability in the recognition of different DNA sequences by a protein and suggests preferred strategies for the expansion of target site specificity by EcoRV.

Role of protein-induced bending in the specificity of DNA recognition: crystal structure of EcoRV endonuclease complexed with d(AAAGAT) + d(ATCTT).

The crystal structure of EcoRV endonuclease has been determined at 2. 1 A resolution complexed to two five-base-pair DNA duplexes each containing the cognate recognition half-site. The highly localized 50 degrees bend into the major groove seen at the center TA-step of the continuous GATATC site is preserved in this discontinuous DNA complex lacking the scissile phosphates. Thus, this crystal structure provides evidence that covalent constraints associated with a continuous target site are not essential to enzyme-induced DNA bending, even when these constraints are removed directly at the locus of the bend. The scissile phosphates are also absent in the crystal structure of EcoRV bound to the non-specific site TCGCGA, which shows a straight B-like conformation. We conclude that DNA bending by EcoRV is governed only by the sequence and is not influenced by the continuity of the phosphodiester backbone. Together with other data showing that cleavable non-cognate sites are bent, these results indicate that EcoRV bends non-cognate sites differing by one or two base-pairs from GATATC, but does not bend non-specific sites that are less similar. Structural and thermodynamic considerations suggest that the sequence-dependent energy cost of DNA bending is likely to play an important role in determining the specificity of EcoRV. This differential cost is manifested at the binding step for bent non-cognate sequences and at the catalytic step for unbent non-specific sequences.

Conformational transitions and structural deformability of EcoRV endonuclease revealed by crystallographic analysis.

The structures of wild-type and mutant forms of the unliganded EcoRV endonuclease dimer have been determined at 2.4 A resolution in a new crystal lattice. Comparison of these structures with that of the free enzyme determined with different packing constraints shows that the conformations of the domain interfaces are not conserved between crystal forms. The unliganded enzyme and the enzyme-DNA complex delineate two distinct quaternary states separated by a 25 degrees intersubunit rotation, but considerable conformational heterogeneity, of the order of 10 degrees domain rotations, exists within each of these states. Comparison of the free enzyme structure between the two crystal forms further reveals that the C-terminal 28 amino acid residues are disordered and undergo an extensive local folding transition upon DNA binding. Introduction of the mutation T93A at the DNA-binding cleft causes large-scale effects on the protein conformation. Structural changes in the mutated unliganded enzyme propagate some 20 to 25 A to the dimerization interface and lead to a rearrangement of monomer subunits. Comparative analysis of these structures, a new structure of the enzyme cocrystallized with DNA and calcium ions, and previously determined cocrystal structures suggests important roles for a number of amino acid residues in facilitating the intersubunit motions and local folding transitions. In particular, the T93A structure reveals a pathway through the protein, by which DNA-binding may cause the domain movements required for proper alignment of catalytic groups. The key active-site residue Glu45 is located on a flexible helix inside this pathway, and this provides a direct means by which essential catalytic functions are coupled to the protein conformational change. It appears that indirect perturbation of the Glu45 conformation via an altered quaternary structure may be a contributing factor to the decreased catalytic efficiency of T93A, and this mechanism may also explain the diminished activities of other active site variants of EcoRV.

Crystal structure of an ecotin-collagenase complex suggests a model for recognition and cleavage of the collagen triple helix.

The crystal structure of fiddler crab collagenase complexed with the dimeric serine protease inhibitor ecotin at 2.5 A resolution reveals an extended cleft providing binding sites for at least 11 contiguous substrate residues. Comparison of the positions of nine intermolecular main chain hydrogen bonding interactions in the cleft, with the known sequences at the cleavage site of type I collagen, suggests that the protease binding loop of ecotin adopts a conformation mimicking that of the cleaved strand of collagen. A well-defined groove extending across the binding surface of the enzyme readily accommodates the two other polypeptide chains of the triple-helical substrate. These observations permit construction of a detailed molecular model for collagen recognition and cleavage by this invertebrate serine protease. Ecotin undergoes a pronounced internal structural rearrangement which permits binding in the observed conformation. The capacity for such rearrangement appears to be a key determinant of its ability to inhibit a wide range of serine proteases.

Structural basis for the broad substrate specificity of fiddler crab collagenolytic serine protease 1.

Crab collagenolytic serine protease 1 efficiently cleaves peptide bonds directly C-terminal to basic, polar, and hydrophobic amino acids. The crystal structure of this enzyme complexed to the protein inhibitor ecotin at 2.5 A resolution reveals a large primary binding pocket punctuated on one wall by the side chain of aspartate-226. Removal or relocation of this negatively charged group by site-directed mutagenesis generates variant enzymes which retain very high activities toward selected substrates. Full retention of activity toward hydrophobic substrates in collagenase D226G is accompanied by a 10-100-fold reduction in k(cat)/Km toward basic residues. In contrast, restoration of the negative charge in a trypsin-like position in collagenase D226G/G189D regenerates nearly full activity toward basic substrates while introducing a 5-fold decrease in k(cat)/Km toward hydrophobic amino acids. These results imply that the collagenase S1 pocket has multiple distinct binding sites for different amino acid side chains, a suggestion supported by molecular modeling studies based on the crystal structure. The ease of specificity modification in the primary binding site of this serine protease parallels similar observations with the bacterial enzymes alpha-lytic protease and subtilisin, and stands in sharp distinction to the extensive mutagenesis required to alter specificity in trypsin.