Long-term stainability of interim prosthetic materials in acidic/staining solutions.

OBJECTIVE: To evaluate the long-term color stainability, translucency, and contrast ratio (CR) of different resins used to fabricate interim prostheses after immersion in acidic/staining solutions. MATERIALS AND METHODS: A total of 160 specimens were divided into 16 groups (n = 10) according to the material (heat-polymerized acrylic resin [HPAR], auto-polymerized acrylic resin [APR], nanoparticulated bis-acrylic resin [BR], and prefabricated poly(methyl methacrylate) block for CAD/CAM [CADR]) and immersion solutions (artificial saliva, cola beverage, coffee, and red wine). A spectrophotometer was used before and after each immersion period (7, 14, 28, 90, and 180 days). Color differences (CIEDE2000 and CIELab) were calculated. A three-way repeated-measures analysis of variance and Bonferroni test (α = .05) were used. RESULTS: After 180 days, the APR presented the highest value for coffee and the CADR presented the smallest value for the cola (P < .001). For the CR, the highest values were obtained at 180 days for BR in coffee (1.35) and wine (1.18) (P < .001). Higher translucency parameters were obtained in the BR and CADR in the initial, 14, 28, and 90 days (P < .001). CONCLUSIONS: From the greatest to the smallest staining potential, the solutions were classified as: wine > coffee > cola beverage > saliva, while for the materials as: APR > BR > HPAR > CADR. CLINICAL SIGNIFICANCE: The knowledge of the long-term optical behavior of interim prosthetic materials is important for clinicians to decide which material to use to match the dietary intake of their patients and their esthetic demands. Prefabricated blocks for CAD/CAM systems have been shown to maintaining their optical characteristics even after a long period of immersion in acidic/staining solutions.

Characterisation of a new plasma-enhanced film to improve shear bond strength between zirconia and veneering ceramic.

The aim of this study was to develop and characterise a new plasma-enhanced chemical vapor deposition (PECVD) film for improving shear bond strength (SBS) between yttria-stabilised tetragonal zirconia (Y-TZP) and veneering ceramic. In total, 192 Y-TZP samples (13 × 5.4 × 5 mm) were divided into 6 groups: control - no treatment (C), airborne-particle abrasion with 27 µm aluminum oxide particles (Al27), 110 µm aluminum oxide particles (Al110), and 250 µm aluminum oxide particles (Al250), application of liner for zirconia (L) and the PECVD film application (P). The Y-TZP surface was characterised by means of Scanning Electronic Microscopy (SEM), Energy-dispersive Spectroscopy (EDS), atomic force microscopy (AFM), surface profilometry and surface-free energy (SFE). SBS between Y-TZP and veneering ceramic was tested before and after thermocycling (20,000 cycles of 5 and 55 °C), and failure mode was also evaluated. Data were analysed by ANOVA and Tukey's HSD test (α = 0.05). Data analysis showed that PECVD film had no effect on surface roughness of Y-TZP (p > 0.05 vs control), whilst the other groups presented higher roughness values (p < 0.05). All treatments increased SFE, except the Al27 group. The highest SBS was presented by the P group (p < 0.05), and values were similar to those of the Al27 group (p = 0.107). Mixed failures were prevalent in all groups, and premature failures were found only in Al groups after thermocycling. Whilst PECVD treatment did not affect Y-TZP surface roughness, high SBS between Y-TZP and the veneering layer was observed. Therefore, PECVD treatment is a promising alternative to improve the performance of bi-layer zirconia-based restorations.

Phantom eye syndrome: a review of the literature.

The purpose of this literature review was to describe the main features of phantom eye syndrome in relation to their possible causes, symptoms, treatments, and influence of eye amputation on quality of life of anophthalmic patients. For this, a bibliographical research was performed in Pubmed database using the following terms: "eye amputation," "eye trauma," "phantom eye syndrome," "phantom pain," and "quality of life," associated or not. Thirteen studies were selected, besides some relevant references contained in the selected manuscripts and other studies hallowed in the literature. Thus, 56 articles were included in this review. The phantom eye syndrome is defined as any sensation reported by the patient with anophthalmia, originated anophthalmic cavity. In phantom eye syndrome, at least one of these three symptoms has to be present: phantom vision, phantom pain, and phantom sensations. This syndrome has a direct influence on the quality of life of the patients, and psychological support is recommended before and after the amputation of the eyeball as well as aid in the treatment of the syndrome. Therefore, it is suggested that, for more effective treatment of phantom eye syndrome, drug therapy should be associated with psychological approach.

Effect of different disinfectants on the microhardness and roughness of acrylic resins for ocular prosthesis.

BACKGROUND: Ocular prosthesis materials should have specific properties for their indication and durability; therefore, it is important to investigate their physical behaviour when affected by several disinfectants. OBJECTIVES: This study evaluated the influence of different disinfecting solutions on the microhardness and surface roughness of acrylic resins for ocular prosthesis. MATERIALS AND METHODS: Fifty samples simulating ocular prostheses were fabricated with N1 resin and colourless resin and divided (n = 10) according to the disinfectant used: neutral soap, Opti-free, Efferdent, 1% hypochlorite (HYC) and 4% chlorhexidine (CHX). Samples were stored in saline solution at 37°C and disinfected during 120 days. Both microhardness and roughness were investigated before, after 60 days and 120 days of disinfection and storage. Microhardness was measured using a microhardner and the roughness with a roughness device. RESULTS: N1 resin showed lower microhardness when compared with colourless resin (p < 0.05). HYC and CHX groups exhibited the highest change of microhardness and roughness values (p < 0.05). An increase in roughness and reduction in microhardness of ocular acrylic resins were observed after both periods of disinfection and storage (p < 0.05). CONCLUSION: Both disinfection/storage periods affected the microhardness and roughness values of the samples.

Hyperbaric oxygen therapy treatment for the fixation of implant prosthesis in oncology patients irradiated.

OBJECTIVES: This study aimed to present a clinical report of an irradiated oncologic patient who underwent hyperbaric oxygen therapy to be rehabilitated with implant-supported prosthesis. MATERIALS AND METHODS: A 67-year-old man was admitted at Oral Oncology Center (FOA-UNESP) presenting a lesion on the mouth floor. After clinical evaluation, incisional biopsy and histopathological exam, a grade II squamous cell carcinoma was diagnosed. The patient was subjected to surgery to remove the lesion and partial glossectomy. Afterwards, the radiotherapy, in the left/right cervicofacial area of the supraclavicular fossa, was conducted. After 3 years of the surgery, the patient was submitted to hyperbaric oxygen therapy. Then, four implants were installed in patient's mandible. Five months later, an upper conventional complete denture and lower full-arch implant-supported prosthesis were fabricated. CONCLUSION: The treatment resulted in several benefits such as improving his chewing efficiency, swallowing and speech, less denture trauma on the mucosa and improving his self-esteem.

Influence of opacifiers on dimensional stability and detail reproduction of maxillofacial silicone elastomer.

BACKGROUND: We evaluated the influence of chemical disinfection and accelerated aging on the dimensional stability and detail reproduction of a silicone elastomer containing one of two opacifiers. METHODS: A total of 90 samples were fabricated from Silastic MDX 4-4210 silicone and divided into groups (n = 10) according to opacifier content (barium sulfate or titanium dioxide) and disinfectant solution (neutral soap, Efferdent, or 4% chlorhexidine). The specimens were disinfected 3 times per week during 60 days and then subjected to accelerated aging for 1008 hours. Dimensional stability and detail reproduction tests were performed after specimens' fabrication (baseline), chemical disinfection and periodically during accelerated aging (252, 504, and 1008 hours). The results were analyzed using 3-way repeated-measures ANOVA and the Tukey HSD test (α = 0.05). RESULTS: All groups exhibited dimensional changes over time. The opacifier (p = .314), period (p < .0001) and their interactions (p = .0041) affected the dimensional stability of the silicone. Statistical significant dimensional differences occurred between groups with (0.071) and without opacifiers (0.053). Accelerated aging influenced the dimensional stability of the samples. All groups scored 2 in the detail reproduction tests, which represents the fully reproducing of three test grooves with accurate angles. CONCLUSIONS: Incorporation of opacifiers alters the dimensional stability of silicones used in facial prosthetics, but seems to have no influence on detail reproduction. Accelerated aging is responsible for most of the dimensional changes in Silastic MDX4 4210, but all dimensional changes measured in this study remained within the limits of stability necessary for this application.

Relationship between psychological factors and symptoms of TMD in university undergraduate students

Temporomandibular disorders is a collective term used to describe a number of related disorders involving the temporomandibular joints, masticatory muscles and occlusion with common symptoms such as pain, restricted movement, muscle tenderness and intermittent joint sounds. The multifactorial TMD etiology is related to emotional tension, occlusal interferences, tooth loss, postural deviation, masticatory muscular dysfunction, internal and external changes in TMJ structure and the various associations of these factors. The aim of this study was to evaluate the prevalence of the relationship between signs of psychological distress and temporomandibular disorder in university students. A total 150 volunteers participated in this study. They attended different courses in the field of human science at one public university and four private universities. TMD was assessed by the Research Diagnostic Criteria (RDC) questionnaire. Anxiety was measured by means of a self-evaluative questionnaire, Spielberger's Trait-State anxiety inventory, to evaluate students' state and trait anxiety. The results of the two questionnaires were compared to determine the relationship between anxiety levels and severity degrees of chronic TMD pain by means of the chi-square test. The significance level was set at 5%. The statistical analysis showed that the TMD degree has a positive association with state-anxiety (p=0.008; p<0.05) and negative with trait-anxiety (p=0.619; p<0.05). Moreover, a high TMD rate was observed among the students (40%). This study concluded that there is a positive association between TMD and anxiety.

Disfuncao temporomandibular e o termo usado para descrever uma serie de disturbios envolvendo as articulacoes temporomandibulares, musculos da mastigacao e oclusao, com sintomas comuns como dor, restricao de movimento, sensibilidade muscular e ruido articular intermitente. A etiologia da DTM e multifatorial e esta relacionada a tensao emocional, interferencias oclusais, perda de dentes, desvio postural, disfuncao muscular mastigatoria, mudancas internas e externas na estrutura da ATM, e a diferentes associacoes entre esses fatores. O objetivo deste estudo foi avaliar a relacao entre estresse psicologico e sinais de desordem temporomandibular em estudantes universitarios. Um total de 150 voluntarios participaram deste estudo sendo alunos de uma universidade publica e quatro universidades privadas de diferentes cursos da area de ciencias humanas. A avaliacao da DTM foi realizada por meio do questionario Research Diagnostic Criteria (RDC). Para a avaliacao da ansiedade foi aplicado o questionario Ansiedade Traco-Estado de Spielberger. Os resultados dos niveis de ansiedade e dos graus de DTM dos dois questionarios foram comparados pelo teste do qui-quadrado, com nivel de significancia de 5%. A analise estatistica mostrou que o grau de DTM tem relacao positiva para a Ansiedade-Estado (p = 0,008, p <0,05) e negativa para a ansiedade-traco (p = 0,619, p <0,05), alem disso, foi observado alto indice de DTM entre os estudantes (40%). Por meio dos resultados obtidos e analisados neste estudo, concluiuse que havia uma associacao positiva entre DTM e ansiedade.

Relationship between psychological factors and symptoms of TMD in university undergraduate students.

Temporomandibular disorders is a collective term used to describe a number of related disorders involving the temporomandibular joints, masticatory muscles and occlusion with common symptoms such as pain, restricted movement, muscle tenderness and intermittent joint sounds. The multifactorial TMD etiology is related to emotional tension, occlusal interferences, tooth loss, postural deviation, masticatory muscular dysfunction, internal and external changes in TMJ structure and the various associations of these factors. The aim of this study was to evaluate the prevalence of the relationship between signs of psychological distress and temporomandibular disorder in university students. A total 150 volunteers participated in this study. They attended different courses in the field of human science at one public university and four private universities. TMD was assessed by the Research Diagnostic Criteria (RDC) questionnaire. Anxiety was measured by means of a self-evaluative questionnaire, Spielberger's Trait-State anxiety inventory, to evaluate students'state and trait anxiety. The results of the two questionnaires were compared to determine the relationship between anxiety levels and severity degrees of chronic TMD pain by means of the chi-square test. The significance level was set at 5%. The statistical analysis showed that the TMD degree has a positive association with state-anxiety (p = 0.008; p < 0.05) and negative with trait-anxiety (p = 0.619; p < 0.05). Moreover a high TMD rate was observed among the students (40%). This study concluded that there is a positive association between TMD and anxiety.