Biodegradation of phthalate isomers by Pseudomonas aeruginosa PP4, Pseudomonas sp. PPD and Acinetobacter lwoffii ISP4.

Pseudomonas aeruginosa PP4, Pseudomonas sp. PPD and Acinetobacter lwoffii ISP4 capable of utilizing phthalate isomers were isolated from the soil using enrichment culture technique. The strain ISP4 metabolizes isophthalate, while PPD and PP4 utilizes all three phthalate isomers (ortho-, iso- and tere-) as the sole carbon source. ISP4 utilizes isophthalate (0.1%) more rapidly (doubling time, 0.9 h) compared to PPD (4.64 h), PP4 (7.91 h) and other reported strains so far. The metabolic pathways in these isolates were initiated by dihydroxylation of phthalate isomers. Phthalate is hydroxylated to 3,4-dihydro-3,4-dihydroxyphthalate and 4,5-dihydro-4,5-dihydroxyphthalate in strains PP4 and PPD, respectively; while terephthalate is hydroxylated to 2-hydro-1,2-dihydroxyterephthalate. All three strains hydroxylate isophthalate to 4-hydro-3,4-dihydroxyisophthalate. The generated dihydroxyphthalates were subsequently metabolized to 3,4-dihydroxybenzoate (3,4-DHB) which was further metabolized by ortho ring-cleavage pathway. PP4 and PPD cells grown on phthalate, isophthalate or terephthalate showed respiration on respective phthalate isomer and the activity of corresponding ring-hydroxylating dioxygenase, suggesting the carbon source specific induction of three different ring-hydroxylating dioxygenases. We report, for the first time, the activity of isophthalate dioxygenase and its reductase component in the cell-free extracts. The enzyme showed maximum activity with reduced nicotinamide adenine dinucleotide (NADH) in the pH range 8-8.5. Cells grown on glucose failed to respire on phthalate isomers and 3,4-DHB and showed significantly low activities of the enzymes suggesting that the enzymes are inducible.

Biodegradation of phenanthrene by Pseudomonas sp. strain PP2: novel metabolic pathway, role of biosurfactant and cell surface hydrophobicity in hydrocarbon assimilation.

Pseudomonas sp. strain PP2 isolated in our laboratory efficiently metabolizes phenanthrene at 0.3% concentration as the sole source of carbon and energy. The metabolic pathways for the degradation of phenanthrene, benzoate and p-hydroxybenzoate were elucidated by identifying metabolites, biotransformation studies, oxygen uptake by whole cells on probable metabolic intermediates, and monitoring enzyme activities in cell-free extracts. The results obtained suggest that phenanthrene degradation is initiated by double hydroxylation resulting in the formation of 3,4-dihydroxyphenanthrene. The diol was finally oxidized to 2-hydroxymuconic semialdehyde. Detection of 1-hydroxy-2-naphthoic acid, alpha-naphthol, 1,2-dihydroxy naphthalene, and salicylate in the spent medium by thin layer chromatography; the presence of 1,2-dihydroxynaphthalene dioxygenase, salicylaldehyde dehydrogenase and catechol-2,3-dioxygenase activity in the extract; O(2) uptake by cells on alpha-naphthol, 1,2-dihydroxynaphthalene, salicylaldehyde, salicylate and catechol; and no O(2) uptake on o-phthalate and 3,4-dihydroxybenzoate supports the novel route of metabolism of phenanthrene via 1-hydroxy-2-naphthoic acid --> [alpha-naphthol] --> 1,2-dihydroxy naphthalene --> salicylate --> catechol. The strain degrades benzoate via catechol and cis,cis-muconic acid, and p-hydroxybenzoate via 3,4-dihydroxybenzoate and 3-carboxy- cis,cis-muconic acid. Interestingly, the culture failed to grow on naphthalene. When grown on either hydrocarbon or dextrose, the culture showed good extracellular biosurfactant production. Growth-dependent changes in the cell surface hydrophobicity, and emulsification activity experiments suggest that: (1) production of biosurfactant was constitutive and growth-associated, (2) production was higher when cells were grown on phenanthrene as compared to dextrose and benzoate, (3) hydrocarbon-grown cells were more hydrophobic and showed higher affinity towards both aromatic and aliphatic hydrocarbons compared to dextrose-grown cells, and (4) mid-log-phase cells were significantly (2-fold) more hydrophobic than stationary phase cells. Based on these results, we hypothesize that growth-associated extracellular biosurfactant production and modulation of cell surface hydrophobicity plays an important role in hydrocarbon assimilation/uptake in Pseudomonas sp. strain PP2.

Metabolism of benzyl alcohol via catechol ortho-pathway in methylnaphthalene-degrading Pseudomonas putida CSV86.

Pseudomonas putida CSV86 metabolizes 1- and 2-methylnaphthalene through distinct catabolic and detoxification pathways. In spite of the similarity in the steps involved in the methylnaphthalene detoxification and the toluene side-chain hydroxylation pathways, the strain failed to utilize toluene or xylenes. However, it could grow on benzyl alcohol, 2- and 4-hydroxybenzyl alcohol. Metabolic studies suggest that the benzyl alcohol metabolism proceeds via the benzaldehyde, benzoate, and catechol ortho-cleavage pathway, in contrast to the well established catechol meta-cleavage pathway. Carbon source-dependent enzyme activity studies suggest that the degradation of aromatic alcohol involves two regulons. Aromatic alcohol induces the upper regulon, which codes for aromatic alcohol- and aromatic aldehyde-dehydrogenase and converts alcohol into acid. The aromatic acid so generated induces the specific lower regulon and is metabolized via either the ortho- or the meta-cleavage pathway. CSV86 cells transform 1- and 2-methylnaphthalene to 1- and 2-hydroxymethyl naphthalene, which are further converted to the respective naphthoic acids due to the basal level expression and broad substrate specificity of the upper regulon enzymes.

Role of charged residues at the OmpF porin channel constriction probed by mutagenesis and simulation.

The channel constriction of OmpF porin, a pore protein in the bacterial outer membrane, is highly charged due to the presence of three arginines (R42, R82, and R132) and two acidic residues (D113 and E117). The influence of these charges on ion conductance, ion selectivity, and voltage gating has been studied with mutants D113N/E117Q, R42A/R82A/R132A/D113N/E117Q, and V18K/G131K, which were designed to remove or add protein charge at the channel constriction. The crystal structures revealed no or only local changes compared to wild-type OmpF, thus allowing a comparative study. The single-channel conductance of the isosteric D113N/E117Q variant was found to be 2-fold reduced, and that of the pentuple mutant was 70% of the wild-type value, despite a considerably larger pore cross section. Ion selectivity was drastically altered by the mutations with cation/anion permeability ratios ranging from 1 to 12. Ion flow through these and eight other mutants, which have been characterized previously, was simulated by Brownian dynamics based on the detailed crystal structures. The calculated ion selectivity and relative channel conductance values agree well with the experimental data. This demonstrates that ion translocation through porin is mainly governed by pore geometry and charge, the two factors that are properly represented in the simulations.

Brownian dynamics simulation of ion flow through porin channels.

Bacterial porins, which allow the passage of solutes across the outer bacterial membrane, are structurally well characterized. They therefore lend themselves to detailed studies of the determinants of ion flow through transmembraneous channels. In a comparative study, we have performed Brownian dynamics simulations to obtain statistically significant transfer efficiencies for cations and anions through matrix porin OmpF, osmoporin OmpK36, phosphoporin PhoE and two OmpF charge mutants. The simulations show that the electrostatic potential at the highly charged channel constriction serves to enhance ion permeability of either cations or anions, dependent on the type of porin. At the same time translocation of counterions is not severely impeded. At the constriction, cations and anions follow distinct trajectories, due to the segregation of basic and acidic protein residues. Simulated ion selectivity and relative conductance agree well with experimental values, and are dependent crucially on the charge constellation at the pore constriction. The experimentally observed decrease in ion selectivity and single channel conductance with increasing ionic strength is well reproduced and can be attributed to electrostatic shielding of the pore lining.

Stability of trimeric OmpF porin: the contributions of the latching loop L2.

The channel-forming protein OmpF porin from Escherichia coli spans the bacterial outer membrane. Each of the three monomers comprises a hollow, 16-stranded beta-barrel. These are associated to homotrimers which are unusually stable, due mostly to hydrophobic interactions between the beta-barrels. In addition, a loop, L2 connects one subunit to its neighbor by latching into its channel. Residue E71 on loop 2 is integrated into an ionic network and forms salt bridges and hydrogen bonds with R100 and R132 on the channel wall in the adjacent subunit. To examine these contributions quantitatively, six single-site, two double, and one deletion mutant were constructed on the basis of the atomic coordinates of the protein. Differential scanning calorimetric analysis showed that the salt-bridge, E71-R100, contributes significantly to trimer stability: the substitution E71Q causes a decrease of the transition temperature from 72 to 48 degreesC, with DeltaHcal diminishing from 430 to 201 kcal mol-1. A nearby substitution in the loop, D74N, has lesser effects on thermal stability, while the deletion in L2 (Delta69-77) has an effect comparable to that of E71Q. X-ray structure analysis to 3.0 A resolution revealed only local structural differences in the mutants except for the substitution R100A, where another residue, R132, is found to fill the gap left by the truncated side chain of A100. Functional assays in planar lipid bilayers show significantly increased cation selectivities if the charge distribution was affected.

Identification and characterization of two quiescent porin genes, nmpC and ompN, in Escherichia coli BE.

The genomic DNA of the BE strain of Escherichia coli has been scrutinized to detect porin genes that have not been identified so far. Southern blot analysis yielded two DNA segments which proved highly homologous to, yet distinct from, the ompC, ompF, and phoE porin genes. The two genes were cloned and sequenced. One of them, designated ompN, encodes a porin which, due to low levels of expression, has eluded prior identification. The functional properties (single-channel conductance) of the OmpN porin, purified to homogeneity, closely resemble those of the OmpC porin from E. coli K-12. The second DNA fragment detected corresponds to the nmpC gene, which, due to an insertion of an IS1 element in its coding region, is not expressed in E. coli BE.

Coupling site-directed mutagenesis with high-level expression: large scale production of mutant porins from E. coli.

Combination of an origin repair mutagenesis system with a new mutS host strain increased the efficiency of mutagenesis from 46% to 75% mutant clones. Overexpression with the T7 expression system afforded large quantities of proteins from mutant strains. A series of E. coli BE host strains devoid of major outer membrane proteins was constructed, facilitating the purification of mutant porins to homogeneity. This allowed preparation of 149 porin mutants in E. coli used in detailed explorations of the structure and function of this membrane protein to high resolution.

Voltage gating of Escherichia coli porin channels: role of the constriction loop.

In the homotrimeric OmpF porin from Escherichia coli, each channel is constricted by a loop protruding into the beta-barrel of the monomer about halfway through the membrane. The water-filled channels exist in open or closed states, depending on the transmembrane potential. For the transition between these conformations, two fundamentally different mechanisms may be envisaged: a bulk movement of the constriction loop L3 or a redistribution of charges in the channel lumen. To distinguish between these hypotheses, nine mutant proteins were constructed on the basis of the high-resolution x-ray structure of the wild-type protein. Functional changes were monitored by measuring single-channel conductance and critical voltage of channel closing. Structural alterations were determined by x-ray analysis to resolutions between 3.1 and 2.1 A. Tethering the tip of L3 to the barrel wall by a disulfide bridge (E117C/A333C), mobilizing L3 by perturbing its interaction with the barrel wall (D312N, S272A, E296L), or deleting residues at the tip of the loop (Delta116-120) did not alter appreciably the sensitivity of the channels to an external potential. A physical occlusion, due to a gross movement of L3, which would cause the channels to assume a closed conformation, can therefore be excluded.

A pathway for biodegradation of 1-naphthoic acid by Pseudomonas maltophilia CSV89.

Pseudomonas maltophilia CSV89, a bacterium isolated from soil in our laboratory, grows on 1-naphthoic acid as the sole source of carbon and energy. To elucidate the pathway for degradation of 1-naphthoic acid, the metabolites were isolated from spent medium, purified by TLC, and characterized by gas chromatography-mass spectrometry. The involvement of various metabolites as intermediates in the pathway was established by demonstrating relevant enzyme activities in cell-free extracts, oxygen uptake and transformation of metabolites by the whole cells. The results obtained from such studies suggest that the degradation of 1-naphthoic acid is initiated by double hydroxylation of the aromatic ring adjacent to the one bearing the carboxyl group, resulting in the formation of 1,2-dihydroxy-8-carboxynaphthalene. The resultant diol was oxidized via 3-formyl salicylate, 2-hydroxyisophthalate, salicylate and catechol to TCA cycle intermediates.

Evidence for the involvement of multiple pathways in the biodegradation of 1- and 2-methylnaphthalene by Pseudomonas putida CSV86.

Pseudomonas putida CSV86, a soil bacterium, grows on 1- and 2-methylnaphthalene as the sole source of carbon and energy. In order to deduce the pathways for the biodegradation of 1- and 2-methylnaphthalene, metabolites were isolated from the spent medium and purified by thin layer chromatography. Emphasis has been placed on the structural characterisation of isolated intermediates by GC-MS, demonstration of enzyme activities in the cell free extracts and measurement of oxygen uptake by whole cells in the presence of various probable metabolic intermediates. The data obtained from such a study suggest the possibility of occurrence of multiple pathways in the degradation of 1- and 2-methylnaphthalene. We propose that, in one of the pathways, the aromatic ring adjacent to the one bearing the methyl moiety is oxidized leading to the formation of methylsalicylates and methylcatechols. In another pathway the methyl side chain is hydroxylated to -CH2-OH which is further converted to -CHO and -COOH resulting in the formation of naphthoic acid as the end product. In addition to this, 2-hydroxymethylnaphthalene formed by the hydroxylation of the methyl group of 2-methylnaphthalene undergoes aromatic ring hydroxylation. The resultant dihydrodiol is further oxidised by a series of enzyme catalysed reactions to form 4-hydroxymethyl catechol as the end product of the pathway.