A high-resolution polarimeter formed from inexpensive optical parts.

We describe a high resolution laser polarimeter built from commodity optical components. The optical rotation angle is determined by measuring the phase difference between two harmonically modulated polarised laser beams - an 'object beam' that passes through the sample under test and a 'reference beam' that bypasses the sample. The complete polarimeter may be assembled from low cost off-the-shelf parts for less than £300 (UK Sterling). Data acquisition and analysis are carried out on a microcontroller running an efficient algorithm based on the sliding Discrete Fourier Transform. Despite its low cost, the polarimeter is a fully automatic, research-grade instrument with an accuracy of ±0.0013° and a precision of ±0.0028° - comparable to far costlier commercial instruments. The polarimeter's ease of use, compact size, fast measurement times and high angular resolution make it a capable and versatile tool for analytical science, while its low cost means it is ideally suited for use in resource-constrained environments and process monitoring. The polarimeter is released here as open hardware, with technical diagrams, a full parts list, and source code for its firmware included as Supplementary Information.

Evaluation of Pyrethroid Insecticides and Insect Growth Regulators Applied to Different Surfaces for Control of Trogoderma granarium (Coleoptera: Dermestidae) the Khapra Beetle.

The khapra beetle, Trogoderma granarium Everts (Coleoptera: Dermestidae), is a serious pest of stored products and is the only stored product insect pest that triggers a quarantine response when it is found in the United States. The larvae of T. granarium feed on a wide range of dry food products of plant and animal origin, including cereals, dried fish, and museum specimens. In this study, we evaluated the residual efficacy of two pyrethroid insecticides, deltamethrin and cyfluthrin, applied on concrete, wood, painted wood, vinyl flooring tile, and metal surfaces using small and large T. granarium larvae. Residual efficacy of two insect growth regulators (IGRs), methoprene and pyriproxyfen was also evaluated on concrete, metal, and wood surfaces. In both studies, larvae were exposed with provision of a food source on the treated surfaces and residual assays were conducted at 0 months (1 d), 1, 2, and 3 months post treatment. In general, both of the pyrethroids provided a high level of control of T. granarium larvae, though small larvae were much more susceptible than large larvae. The IGRs were comparatively less effective, with more larval survival and adult emergence of exposed larvae compared with the pyrethroids. Residues of the pyrethroids and IGRs were most persistent on the metal surface. Results can be used to help to control and eradicate infestations of T. granarium when they are detected in the United States.

Bright conjugated polymer nanoparticles containing a biodegradable shell produced at high yields and with tuneable optical properties by a scalable microfluidic device.

This study compares the performance of a microfluidic technique and a conventional bulk method to manufacture conjugated polymer nanoparticles (CPNs) embedded within a biodegradable poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide) (PEG5K-PLGA55K) matrix. The influence of PEG5K-PLGA55K and conjugated polymers cyano-substituted poly(p-phenylene vinylene) (CN-PPV) and poly(9,9-dioctylfluorene-2,1,3-benzothiadiazole) (F8BT) on the physicochemical properties of the CPNs was also evaluated. Both techniques enabled CPN production with high end product yields (∼70-95%). However, while the bulk technique (solvent displacement) under optimal conditions generated small nanoparticles (∼70-100 nm) with similar optical properties (quantum yields ∼35%), the microfluidic approach produced larger CPNs (140-260 nm) with significantly superior quantum yields (49-55%) and tailored emission spectra. CPNs containing CN-PPV showed smaller size distributions and tuneable emission spectra compared to F8BT systems prepared under the same conditions. The presence of PEG5K-PLGA55K did not affect the size or optical properties of the CPNs and provided a neutral net electric charge as is often required for biomedical applications. The microfluidics flow-based device was successfully used for the continuous preparation of CPNs over a 24 hour period. On the basis of the results presented here, it can be concluded that the microfluidic device used in this study can be used to optimize the production of bright CPNs with tailored properties with good reproducibility.

Developing food-grade coatings for dry-cured hams to protect against ham mite infestation.

Dry-cured hams may become infested with ham mites, Tyrophagus putrescentiae, during the aging process. Methyl bromide is the only known available fumigant pesticide that is effective at controlling ham mite infestations in dry cured ham plants. However, methyl bromide will be phased out of all industries as early as 2015 due to its status as an ozone-depleting substance. Research was conducted to develop and evaluate the potential of using food-grade film coatings to control mite infestations, without affecting the aging process and sensory properties of the dry-cured hams. Cubes coated with xanthan gum+20% propylene glycol and carrageenan/propylene glycol alginate+10% propylene glycol were effective at controlling mite infestations under laboratory conditions. Water vapor permeability was measured to estimate the impact of coatings during the aging process. It was evident that carrageenan/propylene glycol alginate coatings were permeable to moisture, which potentially makes them usable during aging.

Controlling pests in dry-cured ham: A review.

Dry-cured hams can become infested with ham mites, red-legged beetles, cheese skippers, and larder beetles during the aging process. Though other methods may be used for beetles and cheese skippers, methyl bromide is the only available fumigant that is effective at controlling ham mites in dry-cured ham plants in the United States. However, methyl bromide will be phased out of all industries by approximately 2015. This paper will review and explore potential alternatives that have been investigated to determine their feasibility for replacing methyl bromide to control pest infestations in dry-cured ham plants in the United States. Potential alternatives include: 1) fumigants such as phosphine and sulfuryl fluoride; 2) physical control approaches through cold treatment, modified atmosphere, inert dusts, etc.; 3) pesticides and bioactive compounds; 4) food-grade processing aids. The most promising potential alternatives to date include the use of propylene glycol on the ham surface, the exploration of alternative fumigants, and implementation of an integrated pest management plan.

Phosphine fumigation and residues in dry-cured ham in commercial applications.

Dry-cured hams often become infested with ham mites (Tyrophagus putrescentiae) during the aging process. Methyl bromide has been used to fumigate dry cured ham plants and is the only available fumigant that is effective at controlling ham mite infestations. However, methyl bromide will eventually be phased out of all industries. This research was designed to determine the efficacy of phosphine fumigation at controlling ham mites and red-legged beetles and any impact of phosphine fumigation on the sensory quality and safety of dry cured hams. Fumigation trials were conducted in simulated ham aging houses and commercial ham aging houses. Mite postembryonic mortality was 99.8% in the simulated aging houses and >99.9% in commercial aging houses three weeks post fumigation. Sensory tests with trained panelists indicated that there were no detectable differences (P > 0.05) between phosphine fumigated and control hams. In addition, residual phosphine concentration was below the legal limit of 0.01 ppm in ham slices that were taken from phosphine fumigated hams.

Phosphine resistance in Tribolium castaneum and Rhyzopertha dominica from stored wheat in Oklahoma.

Phosphine gas, or hydrogen phosphide (PH3), is the most common insecticide applied to durable stored products worldwide and is routinely used in the United States for treatment of bulk-stored cereal grains and other durable stored products. Research from the late 1980s revealed low frequencies of resistance to various residual grain protectant insecticides and to phosphine in grain insect species collected in Oklahoma. The present work, which used the same previously established discriminating dose bioassays for phosphine toxicity as in the earlier study, evaluated adults of nine different populations of red flour beetle, Tribolium castaneum (Herbst), and five populations of lesser grain borer, Rhyzopertha dominica (F.) collected from different geographic locations in Oklahoma. One additional population for each species was a laboratory susceptible strain. Discriminating dose assays determined eight out of the nine T. castaneum populations, and all five populations of R. dominica, contained phosphine-resistant individuals, and highest resistance frequencies were 94 and 98%, respectively. Dose-response bioassays and logit analyses determined that LC99 values were approximately 3 ppm for susceptible and 377 ppm for resistant T. castaneum, and approximately 2 ppm for susceptible and 3,430 ppm for resistant R. dominica. The most resistant T. castaneum population was 119-fold more resistant than the susceptible strain and the most resistant R. dominica population was over 1,500-fold more resistant. Results suggest a substantial increase in phosphine resistance in these major stored-wheat pests in the past 21 yr, and these levels of resistance to phosphine approach those reported for other stored-grain pest species in other countries.

Efficacy of heat treatment for disinfestation of concrete grain silos.

Field experiments were conducted in 2007 and 2008 to evaluate heat treatment for disinfestations of empty concrete elevator silos. A Mobile Heat Treatment Unit was used to introduce heat into silos to attain target conditions of 50 degrees C for at least 6 h. Ventilated plastic containers with a capacity of 100 g of wheat, Triticum aestivum L., held Rhyzopertha dominica (F.) (Coleoptera: Bostrichidae) and Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae). Polyvinyl chloride containers with a capacity of 300 g of wheat held adults of Liposcelis corrodens (Heymons) (Psocoptera: Liposcelididae) and Liposcelis decolor (Pearman), which were contained in 35-mm Petri dishes within the grain. Containers were fastened to a rope suspended from the top of the silo at depths of 0 m (just under the top manhole), 10 m, 20 m, and 30 m (silo floor). When the highest temperature achieved was approximately 50 degrees C for 6 h, parental mortality ofR. dominica and T. castaneum, and both psocid species was 98-100%. Progeny production of R. dominica occurred when there was parental survival, but in general R. dominica seemed less impacted by the heat treatment than T. castaneum. There was 100% mortality of L. corrodens at all depths in the heat treatments but only 92.5% mortality for L. decolor, with most survivors located in the bioassay containers at the top of the silo. Results show wheat kernels may have an insulating effect and heat treatment might be more effective when used in conjunction with sanitation and cleaning procedures.

Effects of carbon dioxide and ozone treatments on the volatile composition and sensory quality of dry-cured ham.

Randomized complete block designs with 3 replications were utilized to evaluate the effects of carbon dioxide (CO(2)) (0% at 96 h, 60% at 48 h, and 60% at 96 h) and ozone (O(3)) (0 and 175 ppm for 48 h) on the volatile flavor compound concentrations in dry-cured ham. Minimal differences existed in the presence and concentration of aroma active compounds in both CO(2) and O(3) fumigated hams but phenols were slightly more prevalent (P < 0.05) in the CO(2) treatments and oxidation compounds were slightly elevated (P < 0.05) in the ozone treated samples when compared to the control. Triangle tests (n = 54 and 56) indicated that consumers could not discern (P > 0.75) between the control hams and the hams that were fumigated with CO(2) and O(3), respectively. This study revealed that there were minimal aroma/flavor differences among the ham treatments between 0 and 60% CO(2) for 96 h; and also between 0 and 175 ppm O(3).

Effects of phosphine and methyl bromide fumigation on the volatile flavor profile and sensory quality of dry cured ham.

In separate experiments, randomized complete block designs with three replications were utilized to evaluate the effects of phosphine (PH(3)) (0, 200 and 1000ppm for 48h) and methyl bromide (MB) (0, 4, 8, 16, and 32mg/L for 48h) fumigation concentration on the volatile flavor compound concentrations in dry cured ham. Minimal differences existed (P>0.05) in the presence and concentration of aroma active compounds in both PH(3) and MB fumigated hams but sulfur and oxidation compounds were more prevalent (P<0.05) in the fumigated treatments when compared to the control. As phosphine fumigation concentration increased, the residual concentration of phosphine also increased in the hams (P<0.05), but all samples contained levels that are lower than the legal limit of phosphine allowed in stored food products (0.01ppm) in the United States. A triangle test (n=56) indicated that consumers could not discriminate (P>0.75) between the control hams and those that were fumigated with PH(3). Minimal aroma/flavor differences existed among MB, PH3 and control hams, and dry cured ham that was fumigated with PH(3) was safe for consumption based on residual phosphine concentrations in the meat tissue.

Limitation on prepulse level for cone-guided fast-ignition inertial confinement fusion.

The viability of fast-ignition (FI) inertial confinement fusion hinges on the efficient transfer of laser energy to the compressed fuel via multi-MeV electrons. Preformed plasma due to the laser prepulse strongly influences ultraintense laser plasma interactions and hot electron generation in the hollow cone of an FI target. We induced a prepulse and consequent preplasma in copper cone targets and measured the energy deposition zone of the main pulse by imaging the emitted K_{alpha} radiation. Simulation of the radiation hydrodynamics of the preplasma and particle in cell modeling of the main pulse interaction agree well with the measured deposition zones and provide an insight into the energy deposition mechanism and electron distribution. It was demonstrated that a under these conditions a 100 mJ prepulse eliminates the forward going component of approximately 2-4 MeV electrons.

Sulfuryl fluoride fumigation effects on the safety, volatile composition, and sensory quality of dry cured ham.

A randomized complete block design with three replications was utilized to evaluate the effects (P<0.05) of various fumigation concentrations of sulfuryl fluoride (SF) (0, 12, 24, 36 and 72 mg/L) on the fluoride, sulfuryl fluoride, and volatile flavor compound concentrations in dry cured ham. Fluoride and SF concentrations increased (P<0.05) in dry cured hams as SF fumigation concentration increased, but all samples contained fluoride and SF concentrations below the legal limits of 20 and 0.01 ppm, respectively. Minimal differences existed (P>0.05) in the presence and concentration of aroma active compounds, but oxidation compounds were slightly more prevalent (P<0.05) in the 72 mg/ml treatment when compared to the control. A triangle test (n=54) indicated that consumers could not discern (P>0.75) between hams that were fumigated with SF at 0 and 36 mg/ml. This study revealed that there were minimal aroma/flavor differences among the ham treatments between 0 and 36 mg/ml, and that dry cured ham that was fumigated with SF was safe and met legal requirements for consumption.

Diagnostics for fast ignition science (invited).

The ignition concept for electron fast ignition inertial confinement fusion requires sufficient energy be transferred from an approximately 20 ps laser pulse to the compressed fuel via approximately MeV electrons. We have assembled a suite of diagnostics to characterize such transfer, simultaneously fielding absolutely calibrated extreme ultraviolet multilayer imagers at 68 and 256 eV; spherically bent crystal imagers at 4.5 and 8 keV; multi-keV crystal spectrometers; MeV x-ray bremmstrahlung, electron and proton spectrometers (along the same line of sight), and a picosecond optical probe interferometer. These diagnostics allow careful measurement of energy transport and deposition during and following the laser-plasma interactions at extremely high intensities in both planar and conical targets. Together with accurate on-shot laser focal spot and prepulse characterization, these measurements are yielding new insights into energy coupling and are providing critical data for validating numerical particle-in-cell (PIC) and hybrid PIC simulation codes in an area crucial for fast ignition and other applications. Novel aspects of these diagnostics and how they are combined to extract quantitative data on ultrahigh intensity laser-plasma interactions are discussed.

Proton radiography of a laser-driven implosion.

Protons accelerated by a picosecond laser pulse have been used to radiograph a 500 microm diameter capsule, imploded with 300 J of laser light in 6 symmetrically incident beams of wavelength 1.054 microm and pulse length 1 ns. Point projection proton backlighting was used to characterize the density gradients at discrete times through the implosion. Asymmetries were diagnosed both during the early and stagnation stages of the implosion. Comparison with analytic scattering theory and simple Monte Carlo simulations were consistent with a 3+/-1 g/cm3 core with diameter 85+/-10 microm. Scaling simulations show that protons>50 MeV are required to diagnose asymmetry in ignition scale conditions.

Longevity and pheromone output in stored-product Bostrichidae.

Information on longevity and on the effect of ageing on pheromone signalling in Bostrichidae infesting stored products is important because pheromones play a crucial role in mediating aggregation by the species in storages. The longevity of starved and unstarved Prostephanus truncatus (Horn) and Rhyzopertha dominica (Fabricius) were determined at 28+/-1 degrees C, 65+/-2% RH and L12:D12 cycle. Additionally, the effects of ageing on rate of pheromone emission were investigated in R. dominica by comparing emission rates of the aggregation pheromones Dominicalure-1 (DL1) and Dominicalure-2 (DL2) released by adult males ranging from 4, 8, 12, 24 and 48 weeks of age. Mean survival time of starved male and female P. truncatus was 8.6+/-0.6 and 9.1+/-0.4 days, respectively. Starved R. dominica males lived for 5.7+/-0.2 days, and females for 4.7+/-0.1 days. However, mean survival times were not significantly different for starved males vs. females of either species. Mean survival time of unstarved male and female P. truncatus was 27.5+/-2.0 and 18.0+/-3.3 weeks, respectively, and for unstarved male and female R. dominica was 26.1+/-2.8 and 16.7+/-2.9 weeks, respectively. Difference in mean survival times of unstarved males vs. females in both P. truncatus and R. dominica were significant. Between species, no significant difference was observed in mean survival time between unstarved males of P. truncatus or R. dominica, nor between females of both species. Rate of pheromone emission in R. dominica was higher when the insects were relatively young (4, 8 and 12 weeks old), but declined by almost 55% in treatments where the insect were at about 24 or 48 weeks old, suggesting that recruitment potential of R. dominica might reduce substantially as the insects age.

Factors affecting capture of Cryptolestes ferrugineus (Coleoptera: Laemophloeidae) in traps placed in stored wheat.

Cryptolestes ferrugineus (Stephens), the rusty grain beetle, infests grain externally and is a common pest of stored wheat throughout the world. Detection and population estimation of this insect are important in avoiding discounts at the point of sale. Laboratory experiments compared number of insect captures in the WNB II probe and PC trap in stored grain with a known insect density. Capture rates were strongly related to insect densities in wheat. In a simultaneous test of insect density, ranging from one to three insects per kilogram, and temperatures between 20 and 40 degrees C, insect captures in WB II probe traps increased linearly with insect density in the grain but had a quadratic response to temperature. Hole density, ranging from 40 to 120 holes along a 15-cm stretch of the trap body, was unrelated to number of insect captures. Probe trap diameters ranging from 26 to 60 mm were also unrelated to insect captures. Finally, dead rusty grain beetles were recovered in probe traps. The recovery of dead insects increased with insect density when insects were found in an aggregated dispersal pattern, such as would be found following phosphine fumigation of grain. Experiments discussed here will help grain managers understand how probe traps may be used in C. ferrugineus population estimation.

Effects of temperature and exposure time on mortality of stored-product insects exposed to low pressure.

The prospects of using low pressure that creates a low-oxygen atmosphere to control stored-product insects were investigated in the laboratory. Eggs, larvae, and pupae of Tribolium castaneum (Herbst), Plodia interpunctella (Hübner), and Rhyzopertha dominica (F.) were exposed to 32.5 mmHg in glass chambers at 25, 33, 37, and 40 degrees C for times ranging from 30 min to 144 h. Time-mortality data were subjected to probit analyses and lethal dose ratios were computed to determine differences in lethal time (LT) values among all species-life stage combinations across the four temperatures. Eggs of each species were the life stage most tolerant to low pressure. Pupae of T. castaneum and R. dominica were more tolerant to low pressure than larvae. In all life stages, mortality increased with increasing exposure time to low pressure and also with increasing temperature. Immature stages of R. dominica were more tolerant to low pressure than immature stages of the other two species. The LT99 for R. dominica eggs was 176.32 h at 25 degrees C and that for P. interpunctella eggs was 28.35 h at the same temperature. An increase in temperature to 33 degrees C resulted in a LT99 < of 85.98 h for R. dominica and 6.21 h for P. interpunctella. Higher temperatures resulted in further significant reduction in lethal time values. Low pressure represents a simple, nonchemical alternative to fumigants such as methyl bromide and phosphine for controlling pests of stored-products or other commodities.

Intense high-energy proton beams from Petawatt-laser irradiation of solids.

An intense collimated beam of high-energy protons is emitted normal to the rear surface of thin solid targets irradiated at 1 PW power and peak intensity 3x10(20) W cm(-2). Up to 48 J ( 12%) of the laser energy is transferred to 2x10(13) protons of energy >10 MeV. The energy spectrum exhibits a sharp high-energy cutoff as high as 58 MeV on the axis of the beam which decreases in energy with increasing off axis angle. Proton induced nuclear processes have been observed and used to characterize the beam.

Activity of Plodia interpunctella (Lepidoptera: Pyralidae) in and around flour mills.

Studies were conducted at two flour mills where male Indian meal moths, Plodia interpunctella (Hübner), were captured using pheromone-baited traps. Objectives were to determine the distribution of male P. interpunctella at different locations in and around the mills throughout the season, and to monitor moth activity before and after one of the mills was fumigated with methyl bromide to assess efficacy of treatment. Commercially available sticky traps baited with the P. interpunctella sex pheromone were placed at various locations outside and within the larger of the two mills (mill 1). Moths were captured inside mill 1 after methyl bromide fumigations. The highest numbers of P. interpunctella were caught outside the facility and at ground floor locations near outside openings. Additional traps placed in the rooms above the concrete stored-wheat silos at mill 1 during the second year captured more moths than did traps within the mill's production and warehouse areas. In another study, moths were trapped at various distances from a smaller flour mill (mill 2) to determine the distribution of moths outdoors relative to the mill. There was a negative correlation between moth capture and distance from the facility, which suggested that moth activity was concentrated at or near the flour mill. The effectiveness of the methyl bromide fumigations in suppressing moth populations could not be assessed with certainty because moths captured after fumigation may have immigrated from outside through opened loading bay warehouse doors. This study documents high levels of P. interpunctella outdoors relative to those recorded inside a food processing facility. Potential for immigration of P. interpunctella into flour mills and other stored product facilities from other sources may be greater than previously recognized. Moth entry into a food processing facility after fumigation is a problem that should be addressed by pest managers.

Multiple origins of cyclodiene insecticide resistance in Tribolium castaneum (Coleoptera: Tenebrionidae).

The number of origins of pesticide resistance-associated mutations is important not only to our understanding of the evolution of resistance but also in modeling its spread. Previous studies of amplified esterase genes in a highly dispersive Culex mosquito have suggested that insecticide resistance-associated mutations (specifically a single-gene duplication event) can occur a single time and then spread throughout global populations. In order to provide data for resistance-associated point mutations, which are more typical of pesticide mechanisms as a whole, we studied the number of independent origins of cyclodiene insecticide resistance in the red flour beetle Tribolium castaneum. Target-site insensitivity to cyclodienes is conferred by single point mutations in the gene Resistance to dieldrin (Rdl), which codes for a subunit of a gamma-aminobutyric acid (GABA) receptor. These point mutations are associated with replacements of alanine 302 which render the receptor insensitive to block by the insecticide. We collected 141 strains of Tribolium worldwide and screened them for resistance. Twenty-four strains contained resistant individuals. After homozygosing 23 of these resistance alleles we derived a nucleotide sequence phylogeny of the resistant strains from a 694-bp section of Rdl, encompassing exon 7 (which contains the resistance-associated mutation) and part of a flanking intron. The phylogeny also included six susceptible alleles chosen at random from a range of geographical locations. Resistance alleles fell into six clades and three clades contained both resistant and susceptible alleles. Although statistical analysis provided support at only the 5-6% level, the pattern of variation in resistance alleles is more readily explained by multiple independent origins of resistance than by spread of a single resistance-associated mutation. For example, two resistance alleles differed from two susceptible alleles only by the resistance-associated mutation itself, suggesting that they form the susceptible ancestors and that resistance arose independently in several susceptible backgrounds. This suggests that in Tribolium Rdl, de novo mutations for resistance have arisen independently in several populations. Identical alleles were found in geographically distant regions as well, also implying that some Rdl alleles have been exported in stored grain. These differences from the Culex study may stem both from differences in the population genetics of Tribolium versus that of mosquitoes and differences in mutation rates associated with point mutations versus gene duplication events. The Tribolium data therefore suggest that multiple origins of insecticide resistance (associated with specific point mutations) may be more common than the spread of single events. These findings have implications for the way in which we model the evolution and spread of insecticide resistance genes and also suggest that parallel adaptive substitutions may not be uncommon in phyletic evolution.