Programmable multiphoton quantum interference in a single spatial mode.

The interference of nonclassical states of light enables quantum-enhanced applications reaching from metrology to computation. Most commonly, the polarization or spatial location of single photons are used as addressable degrees of freedom for turning these applications into praxis. However, the scale-up for the processing of a large number of photons of these architectures is very resource-demanding due to the rapidly increasing number of components, such as optical elements, photon sources, and detectors. Here, we demonstrate a resource-efficient architecture for multiphoton processing based on time-bin encoding in a single spatial mode. We use an efficient quantum dot single-photon source and a fast programmable time-bin interferometer to observe the interference of up to eight photons in 16 modes, all recorded only with one detector, thus considerably reducing the physical overhead previously needed for achieving equivalent tasks. Our results can form the basis for a future universal photonics quantum processor operating in a single spatial mode.

Experimental certification of contextuality, coherence, and dimension in a programmable universal photonic processor.

Quantum superposition of high-dimensional states enables both computational speed-up and security in cryptographic protocols. However, the exponential complexity of tomographic processes makes certification of these properties a challenging task. In this work, we experimentally certify coherence witnesses tailored for quantum systems of increasing dimension using pairwise overlap measurements enabled by a six-mode universal photonic processor fabricated with a femtosecond laser writing technology. In particular, we show the effectiveness of the proposed coherence and dimension witnesses for qudits of dimensions up to 5. We also demonstrate advantage in a quantum interrogation task and show it is fueled by quantum contextuality. Our experimental results testify to the efficiency of this approach for the certification of quantum properties in programmable integrated photonic platforms.

Six-telescope integrated optics beam combiner fabricated using ultrafast laser inscription for J- and H-band astronomy.

We have built and characterized, to our knowledge, the first six-telescope discrete beam combiner (DBC) for stellar interferometry in the astronomical J-band. It is the DBC with the largest number of beam combinations and was manufactured using ultrafast laser inscription in borosilicate glass, with a throughput of ≈56%. For calibration of the visibility-to-pixel matrix, we use a two-input Michelson interferometer and extract the complex visibility. A visibility amplitude of 1.05 and relative precision of 2.9% and 3.8% are extracted for 1328 nm and 1380 nm, respectively. Broadband (≤40n m) characterization is affected by dispersion but shows similar performance.

Resetting directional couplers for high-fidelity quantum photonic integrated chips.

In this Letter, we propose a fabrication technique based on femtosecond laser secondary direct writing (FsLSDW) that allows us to statically reset the beam-splitting ratio of directional couplers. By modifying the interaction region with a second inscription, the coupling coefficient of the reconstructed devices can be indeed changed continuously within the range of 0.49-2.1 rad/mm, thus enabling a complete tunability of the reconstructed splitting ratio from zero to full power transfer between the waveguides. This powerful reconstruction capability facilitates the arbitrary reset of an imperfect device, from any initial splitting ratio to the correct one. In the future, such static control method could potentially solve the fabrication error problem in the manufacturing of high-fidelity large-scale integrated photonic quantum chips.

First stellar photons for an integrated optics discrete beam combiner at the William Herschel Telescope.

We present the first on-sky results of a four-telescope integrated optics discrete beam combiner (DBC) tested at the 4.2 m William Herschel Telescope. The device consists of a four-input pupil remapper followed by a DBC and a 23-output reformatter. The whole device was written monolithically in a single alumino-borosilicate substrate using ultrafast laser inscription. The device was operated at astronomical H-band (1.6 µm), and a deformable mirror along with a microlens array was used to inject stellar photons into the device. We report the measured visibility amplitudes and closure phases obtained on Vega and Altair that are retrieved using the calibrated transfer matrix of the device. While the coherence function can be reconstructed, the on-sky results show significant dispersion from the expected values. Based on the analysis of comparable simulations, we find that such dispersion is largely caused by the limited signal-to-noise ratio of our observations. This constitutes a first step toward an improved validation of the DBC as a possible beam combination scheme for long-baseline interferometry.

Symmetric polarization-insensitive directional couplers fabricated by femtosecond laser writing.

We study analytically the polarization behaviour of directional couplers composed of birefringent waveguides, showing that they can induce polarization transformations that depend on the specific input-output path considered. On the basis of this study, we propose and demonstrate experimentally, by femtosecond laser writing, directional couplers that yield a polarization-independent power splitting and, at the same time, preserve the polarization state of the propagating light. More in detail, we devise two different approaches to realize such devices: the first one is based on local birefringence engineering by additional refractive index modification tracks, while the second one exploits ultra-low birefringence waveguides (b = 1.2 × 10-6), obtained by thermal annealing.

Climate change, water supply and environmental problems of headwaters: The paradigmatic case of the Tiber, Savio and Marecchia rivers (Central Italy).

River headwaters, in spite of their importance for habitats and water supply, are often inadequately studied and managed. This study discusses the effects of the hydrogeological system and climatic variations on the environment of Monte Fumaiolo (Central Italy), which corresponds to the headwaters of the rivers Tiber, Savio and Marecchia. The area is a key system for supplying drinking-water and is also the habitat of amphibians such as the endemic and endangered Bombina pachypus and other amphibian species. Ongoing climate change is affecting the area: during the last 30years, five prolonged droughts have occurred, against only one in the preceding 40years. On all time-scales, there is a decrease in rainfall during the recharge period and an increase of temperature: these trends correspond to a decrease in water yield of about 12% over the last 30years. The hydrologic system of the study area is composed of one basic aquifer and a few perched aquifers feeding springs. Their resilience to drought depends on their geological setting: study of some depletion curves helped us to understand the geological setting of the various types, and two promising sites for the habitat preservation of amphibians were identified. Study results indicate new approaches to the study and management of the environment and its water supply, which could be useful in similar areas.