Artificial covalent linkage of bacterial acyl carrier proteins for fatty acid production.

Acyl carrier proteins (ACPs) are essential to the production of fatty acids. In some species of marine bacteria, ACPs are arranged into tandem repeats joined by peptide linkers, an arrangement that results in high fatty acid yields. By contrast, Escherichia coli, a relatively low producer of fatty acids, uses a single-domain ACP. In this work, we have engineered the native E. coli ACP into tandem di- and tri-domain constructs joined by a naturally occurring peptide linker from the PUFA synthase of Photobacterium profundum. The size of these tandem fused ACPs was determined by size exclusion chromatography to be higher (21 kDa, 36 kDa and 141 kDa) than expected based on the amino acid sequence (12 kDa, 24 kDa and 37 kDa, respectively) suggesting the formation of a flexible extended conformation. Structural studies using small-angle X-ray scattering (SAXS), confirmed this conformational flexibility. The thermal stability for the di- and tri-domain constructs was similar to that of the unfused ACP, indicating a lack of interaction between domains. Lastly, E. coli cultures harboring tandem ACPs produced up to 1.6 times more fatty acids than wild-type ACP, demonstrating the viability of ACP fusion as a method to enhance fatty acid yield in bacteria.

Fused dimerization increases expression, solubility, and activity of bacterial dehydratase enzymes.

FabA and FabZ are the two dehydratase enzymes in Escherichia coli that catalyze the dehydration of acyl intermediates in the biosynthesis of fatty acids. Both enzymes form obligate dimers in which the active site contains key amino acids from both subunits. While FabA is a soluble protein that has been relatively straightforward to express and to purify from cultured E. coli, FabZ has shown to be mostly insoluble and only partially active. In an effort to increase the solubility and activity of both dehydratases, we made constructs consisting of two identical subunits of FabA or FabZ fused with a naturally occurring peptide linker, so as to force their dimerization. The fused dimer of FabZ (FabZ-FabZ) was expressed as a soluble enzyme with an ninefold higher activity in vitro than the unfused FabZ. This construct exemplifies a strategy for the improvement of enzymes from the fatty acid biosynthesis pathways, many of which function as dimers, catalyzing critical steps for the production of fatty acids.

Engineered (Lys)6-Tagged Recombinant Sulfide-Reactive Hemoglobin I for Covalent Immobilization at Multiwalled Carbon Nanotubes.

The recombinant HbI was fused with a poly-Lys tag ((Lys)6-tagged rHbI) for specific-site covalent immobilization on two carbon nanotube transducer surfaces, i.e., powder and vertically aligned carbon nanotubes. The immobilization was achieved by following two steps: (1) generation of amine-reactive ester from the carboxylic acid groups of the surfaces and (2) coupling these groups with the amine groups of the Lys-tag. We analyzed the immobilization process using different conditions and techniques to differentiate protein covalent attachment from physical adsorption. Fourier transform infrared microspectroscopy data showed a 14 cm-1 displacement of the protein's amide I and amide II peaks to lower the frequency after immobilization. This result indicates a covalent attachment of the protein to the surface. Differences in the morphology of the carbon substrate with and without (Lys)6-tagged rHbI confirmed protein immobilization, as observed by transmission electron microscopy. The electrochemical studies, which were performed to evaluate the redox center of the immobilized protein, show a confinement suitable for an efficient electron transfer system. More importantly, the electrochemical studies allowed determination of a redox potential for the new (Lys)6-tagged rHbI. The data show that the protein is electrochemically active and retains its biological activity toward H2S.

Sulfmyoglobin Conformational Change: A Role in the Decrease of Oxy-Myoglobin Functionality.

This work is focused at understanding the interaction of H2S with Myoglobin (Mb), in particular the Sulfmyoglobin (SMb) product, whose physiological role is controversial and not well understood. The scattering curves, Guinier, Kratky, Porod and P(r) plots were analyzed for oxy-Mb and oxy-Hemoglobin I (oxyHbI) in the absence and presence of H2S, using Small and Wide Angle X-ray Scattering (SAXS/WAXS) technique. Three dimensional models were also generated from the SAXS/WAXS data. The results show that SMb formation, produced by oxyMb and H2S interaction, induces a change in the protein conformation where its envelope has a very small cleft and the protein is more flexible, less rigid and compact. Based on the direct relationship between Mb's structural conformation and its functionality, we suggest that the conformational change observed upon SMb formation plays a contribution to the protein decrease in O2 affinity and, therefore, on its functionality.

Molecular Cloning and Characterization of a (Lys)6-Tagged Sulfide-Reactive Hemoglobin I from Lucina pectinata.

A poly-Lys tag was fused to the Lucina pectinata hemoglobin I (HbI) coding sequence and purified using an efficient and fast process. HbI is a hemeprotein that binds hydrogen sulfide (H2S) with high affinity and it has been used to understand physiologically relevant reactions of this signaling molecule. The (Lys)6-tagged rHbI construct was expressed in E. coli and purified by immobilization on a cation exchange matrix, followed by size-exclusion chromatography. The identity, structure, and function of the (Lys)6-tagged rHbI were assessed by mass spectrometry, small and wide X-ray scattering, optical spectroscopy, and kinetic analysis. The scattering and spectroscopic results showed that the (Lys)6-tagged rHbI is structurally and functionally analogous to the native protein as well as to the (His)6-tagged rHbI. Kinetics studies with H2S indicated that the association (k on) and dissociation (k off) rate constants were 1.4 × 10(5)/M/s and 0.1 × 10(-3)/s, respectively. This results confirmed that the (Lys)6-tagged rHbI binds H2S with the same high affinity as its homologue.

Hydrogen sulfide activation in hemeproteins: the sulfheme scenario.

Traditionally known as a toxic gas, hydrogen sulfide (H2S) is now recognized as an important biological molecule involved in numerous physiological functions. Like nitric oxide (NO) and carbon monoxide (CO), H2S is produced endogenously in tissues and cells and can modulate biological processes by acting on target proteins. For example, interaction of H2S with the oxygenated form of human hemoglobin and myoglobin produces a sulfheme protein complex that has been implicated in H2S degradation. The presence of this sulfheme derivative has also been used as a marker for endogenous H2S synthesis and metabolism. Remarkably, human catalases and peroxidases also generate this sulfheme product. In this review, we describe the structural and functional aspects of the sulfheme derivative in these proteins and postulate a generalized mechanism for sulfheme protein formation. We also evaluate the possible physiological function of this complex and highlight the issues that remain to be assessed to determine the role of sulfheme proteins in H2S metabolism, detection and physiology.

Reactivity and dynamics of H2S, NO, and O2 interacting with hemoglobins from Lucina pectinata.

Hemoglobin HbI from the clam Lucina pectinata is involved in H2S transport, whereas homologous heme protein HbII/III is involved in O2 metabolism. Despite similar tertiary structures, HbI and HbII/III exhibit very different reactivity toward heme ligands H2S, O2, and NO. To investigate this reactivity at the heme level, we measured the dynamics of ligand interaction by time-resolved absorption spectroscopy in the picosecond to nanosecond time range. We demonstrated that H2S can be photodissociated from both ferric and ferrous HbI. H2S geminately rebinds to ferric and ferrous out-of-plane iron with time constants (τgem) of 12 and 165 ps, respectively, with very different proportions of photodissociated H2S exiting the protein (24% in ferric and 80% in ferrous HbI). The Gln(E7)His mutation considerably changes H2S dynamics in ferric HbI, indicating the role of Gln(E7) in controling H2S reactivity. In ferric HbI, the rate of diffusion of H2S from the solvent into the heme pocket (kentry) is 0.30 µM(-1) s(-1). For the HbII/III-O2 complex, we observed mainly a six-coordinate vibrationally excited heme-O2 complex with O2 still bound to the iron. This explains the low yield of O2 photodissociation and low koff from HbII/III, compared with those of HbI and Mb. Both isoforms behave very differently with regard to NO and O2 dynamics. Whereas the amplitude of geminate rebinding of O2 to HbI (38.5%) is similar to that of myoglobin (34.5%) in spite of different distal heme sites, it appears to be much larger for HbII/III (77%). The distal Tyr(B10) side chain present in HbII/III increases the energy barrier for ligand escape and participates in the stabilization of bound O2 and NO.

Biophysical and structural characterization of a sequence-diverse set of solute-binding proteins for aromatic compounds.

Rhodopseudomonas palustris metabolizes aromatic compounds derived from lignin degradation products and has the potential for bioremediation of xenobiotic compounds. We recently identified four possible solute-binding proteins in R. palustris that demonstrated binding to aromatic lignin monomers. Characterization of these proteins in the absence and presence of the aromatic ligands will provide unprecedented insights into the specificity and mode of aromatic ligand binding in solute-binding proteins. Here, we report the thermodynamic and structural properties of the proteins with aromatic ligands using isothermal titration calorimetry, small/wide angle x-ray scattering, and theoretical predictions. The proteins exhibit high affinity for the aromatic substrates with dissociation constants in the low micromolar to nanomolar range. The global shapes of the proteins are characterized by flexible ellipsoid-like structures with maximum dimensions in the 80-90-Å range. The data demonstrate that the global shapes remained unaltered in the presence of the aromatic ligands. However, local structural changes were detected in the presence of some ligands, as judged by the observed features in the wide angle x-ray scattering regime at q ~0.20-0.40 Å(-1). The theoretical models confirmed the elongated nature of the proteins and showed that they consist of two domains linked by a hinge. Evaluation of the protein-binding sites showed that the ligands were found in the hinge region and that ligand stabilization was primarily driven by hydrophobic interactions. Taken together, this study shows the capability of identifying solute-binding proteins that interact with lignin degradation products using high throughput genomic and biophysical approaches, which can be extended to other organisms.

Synchrotron radiation in life sciences.

Synchrotron Radiation (SR) presents itself as a "play-ground" with a large range of methods and techniques suitable to unveil the mysteries of life. Here we attempt to present a few of these methods that complement those employed in the home laboratory. SR diffraction, spectroscopy and imaging methods relevant to the atomic structure determination and characterization of the properties and function of chemical compounds and macromolecules of biological relevance, are introduced.

Hydrogen sulfide and hemeproteins: knowledge and mysteries.

Historically, hydrogen sulfide (H(2)S) has been regarded as a poisonous gas, with a wide spectrum of toxic effects. However, like ·NO and CO, H(2)S is now referred to as a signaling gas involved in numerous physiological processes. The list of reports highlighting the physiological effects of H(2)S is rapidly expanding and several drug candidates are now being developed. As with ·NO and CO, not a single H(2)S target responsible for all the biological effects has been found till now. Nevertheless, it has been suggested that H(2)S can bind to hemeproteins, inducing different responses that can mediate its effects. For instance, the interaction of H(2)S with cytochrome c oxidase has been associated with the activation of the ATP-sensitive potassium channels, regulating muscle relaxation. Inhibition of cytochrome c oxidase by H(2)S has also been related to inducing a hibernation-like state. Although H(2)S might induce these effects by interacting with hemeproteins, the mechanisms underlying these interactions are obscure. Therefore, in this review we discuss the current state of knowledge about the interaction of H(2)S with vertebrate and invertebrate hemeproteins and postulate a generalized mechanism. Our goal is to stimulate further research aimed at evaluating plausible mechanisms that explain H(2)S reactivity with hemeproteins.

Structural determinants for the formation of sulfhemeprotein complexes.

Several hemoglobins were explored by UV-Vis and resonance Raman spectroscopy to define sulfheme complex formation. Evaluation of these proteins upon the reaction with H(2)O(2) or O(2) in the presence of H(2)S suggest: (a) the formation of the sulfheme derivate requires a HisE7 residue in the heme distal site with an adequate orientation to form an active ternary complex; (b) that the ternary complex intermediate involves the HisE7, the peroxo or ferryl species, and the H(2)S molecule. This moiety precedes and triggers the sulfheme formation.

Recombinant hemoglobin II from Lucina pectinata: a large-scale method for hemeprotein expression in E. coli.

Hemoglobin II from the clam L. pectinata is an O(2) reactive protein that remains oxygenated in the presence of other molecules. To determine the mechanism of ligand selection in this hemoglobin, rHbII was expressed in large quantities using an improved fermentation process. The highest protein yield was obtained by: transforming HbII into the BLi5 cells, inducing and supplementing the culture during the mid-log phase with 1 mM IPTG, 30 microg/mL hemin chloride and 1% glucose, and decreasing the temperature to 30 degrees C after induction. In addition, cell culture density was greatly enhanced by using glycerol, adding MgSO(4), supplementing the media with glucose after the glycerol was consumed and maintaining the dissolved oxygen at 35%. Under these conditions the maximum protein yield obtained was approximately 2,300 mg/L. The results indicate that rHbII is similar to the native protein. The protocol was validated with other hemoglobins, indicating that it can be extended to other hemeproteins.

Factors controlling the reactivity of hydrogen sulfide with hemeproteins.

Hemoglobin I (HbI) from the clam Lucina pectinata is an intriguing hemeprotein that binds and transports H(2)S to sulfide-oxidizing chemoautotrophic bacteria to maintain a symbiotic relationship and to protect the mollusk from H(2)S toxicity. Single point mutations at E7, B10, and E11 were introduced into the HbI heme pocket to define the reactivity of sulfide with hemeproteins. The functional and structural properties of mutant and wild-type recombinant proteins were first evaluated using the well-known ferrous CO and O(2) derivatives. The effects of these mutations on the ferric environment were then studied in the metaquo and hydrogen sulfide derivatives. The results obtained with the ferrous HbI mutants show that all the E7 substitutions and the PheB10Tyr mutation influence directly CO and O(2) binding and stability while the B10 and E11 substitutions induce distal structural rearrangements that affect ligand entry and escape indirectly. For the metaquo-GlnE7His, -PheB10Val, -PheB10Leu, and -E11 variants, two individual distal structures are suggested, one of which is associated with H-bonding interactions between the E7 residues and the bound water. Similar H-bonding interactions are invoked for these HbI-H(2)S mutant derivatives and the rHbI, altering in turn sulfide reactivity within these protein samples. This is evident in the resonance Raman spectra of these HbI-H(2)S complexes, which show reduction of heme iron as judged by the appearance of the nu(4) oxidation state marker at 1356 cm(-1), indicative of heme-Fe(II) species. This reduction process depends strongly on distal mutations showing faster reduction for those HbI mutants exhibiting the strongest H-bonding interactions. Overall, the results presented here show that (a) H(2)S association is regulated by external kinetic barriers, (b) H(2)S release is controlled by two competing reactions involving simple sulfide dissociation and heme reduction, (c) at high H(2)S concentrations, reduction of the ferric center dominates, and (d) reduction of the heme is also enhanced in those HbI mutants having polar distal environments.

Structure and ligand selection of hemoglobin II from Lucina pectinata.

Lucina pectinata ctenidia harbor three heme proteins: sulfide-reactive hemoglobin I (HbI(Lp)) and the oxygen transporting hemoglobins II and III (HbII(Lp) and HbIII(Lp)) that remain unaffected by the presence of H(2)S. The mechanisms used by these three proteins for their function, including ligand control, remain unknown. The crystal structure of oxygen-bound HbII(Lp) shows a dimeric oxyHbII(Lp) where oxygen is tightly anchored to the heme through hydrogen bonds with Tyr(30)(B10) and Gln(65)(E7). The heme group is buried farther within HbII(Lp) than in HbI(Lp). The proximal His(97)(F8) is hydrogen bonded to a water molecule, which interacts electrostatically with a propionate group, resulting in a Fe-His vibration at 211 cm(-1). The combined effects of the HbII(Lp) small heme pocket, the hydrogen bonding network, the His(97) trans-effect, and the orientation of the oxygen molecule confer stability to the oxy-HbII(Lp) complex. Oxidation of HbI(Lp) Phe(B10) --> Tyr and HbII(Lp) only occurs when the pH is decreased from pH 7.5 to 5.0. Structural and resonance Raman spectroscopy studies suggest that HbII(Lp) oxygen binding and transport to the host bacteria may be regulated by the dynamic displacements of the Gln(65)(E7) and Tyr(30)(B10) pair toward the heme to protect it from changes in the heme oxidation state from Fe(II) to Fe(III).

Effects of active site mutations in haemoglobin I from Lucina pectinata: a molecular dynamic study.

Haemoglobin I from Lucina pectinata is a monomeric protein consisting of 142 amino acids. Its active site contains a peculiar arrangement of phenylalanine residues (PheB10, PheCD1 and PheE11) and a distal Gln at position E7. Active site mutations at positions B10, E7 and E11 were performed in deoxy haemoglobin I (HbI), followed by 10 ns molecular dynamic simulations. The results showed that the mutations induced changes in domains far from the active site producing more flexible structures than the native HbI. Distance analyses revealed that the heme pocket amino acids at positions E7 and B10 are extremely sensitive to any heme pocket residue mutation. The high flexibility observed by the E7 position suggests an important role in the ligand binding kinetics in ferrous HbI, while both positions play a major role in the ligand stabilisation processes. Furthermore, our results showed that E11Phe plays a pivotal role in protein stability.

Hemoglobin I from Lucina pectinata: a model for distal heme-ligand control.

Lucina pectinata hemoglobin I (HbI), which is a ferric sulfide-reactive hemeprotein, contains a distal pocket characterized by the presence of GlnE7 and PheB10. To elucidate the structural-functional properties of HbI, oxygen binding kinetics and FTIR studies with recombinant HbI (rHbI) and a set of mutants were conducted using CO and CN- as sensors of the hemeprotein environment. Three nuCO modes were observed for rHbI at 1936 cm(-1) (A3, closed conformer) 1950 cm(-1) (A1,2, closed conformer) and 1960 cm(-1) (A0, open conformer). These nuCO were affected by substitution of GlnE7 and PheB10 in the CO complexes. The contribution of GlnE7 is demonstrated when this residue is replaced with Asn, Val or His. For instance, decreasing the positive electrostatic environment with GlnE7Val, causes an increase of 65% in the population of A0 and the disappearance and 55% reduction of the population of the A1,2 and A3 respectively. The contribution of PheB10 to the stabilization of ligands is also observed in the Leu and Tyr mutants. The PheB10Leu mutation produced an 8% decrease in the population of the A3 conformer while that of the A1,2 configuration increased by 30%. This suggests that GlnE7 and PheB10 contribute to the A3 conformer stabilizing the CO in a closed configuration. With CN- as probe no substantial differences in the nuCN was observed upon substitution of GlnE7 by Val while a slight down shift in the nuCN from 2120 cm(-1) to 2117 cm(-1) was observed in the PheB10Leu mutant. This implies that in HbICN GlnE7 moves away from the binding site while PheB10 remains in the vicinity of the bound CN-. Here, a mechanism in which the flexibility of the distal protein matrix coupled with hemeporphyrin movement toward a different configuration is suggested as an important process in the H2S transport and delivery in hemoglobin I.

Tyrosine B10 and heme-ligand interactions of Lucina pectinata hemoglobin II: control of heme reactivity.

The distal pocket of hemoglobin II (HbII) from Lucina pectinata is characterized by the presence of a GlnE7 and a TyrB10. To elucidate the functional properties of HbII, biophysical studies were conducted on HbII and a HbI PheB10Tyr site-directed mutant. The pH titration data at neutral conditions showed visible bands at 486, 541, 577 and 605 nm for both proteins. This suggests the possible existence of a conformational equilibrium between an open and closed configuration due to the interactions of the TyrB10, ligand, and heme iron. The kinetic behavior for the reaction of both ferric proteins with H2O2 indicates that the rate for the formation of the ferryl intermediates species varies with pH, suggesting that the reaction is strongly dependent on the conformational states. At basic pH values, the barrier for the reaction increases as the tyrosine adopts a closed conformation and the ferric hydroxyl replaces the met-aquo species. The existence of these conformers is further supported by resonance Raman (RR) data, which indicate that in a neutral environment, the ferric HbII species is present as a possible mixture of coordination and spin states, with values at 1558 and 1580 cm(-1) for the nu2 marker, and 1479, 1492, and 1503 cm(-1) for the nu3 mode. Moreover, the presence of the A3 and A(o) conformers at 1924 and 1964 cm(-1) in the HbII-CO infrared spectra confirms the existence of an open and closed conformation due to the orientation of the TyrB10 with respect to the heme active center.

High-level production of recombinant sulfide-reactive hemoglobin I from Lucina pectinata in Escherichia coli. High yields of fully functional holoprotein synthesis in the BLi5 E. coli strain.

Hemoglobin I (HbI) from Lucina pectinata is a monomeric protein composed of 143 amino acids with high sulfide affinity. Its unique heme pocket contains three residues not commonly found in vertebrate globins: Phe 29 (B10), Gln 64 (E7), and Phe 68 (E11), which are thought to be important for high affinity for hydrogen sulfide. Recombinant HbI (rHbI) and several site-directed mutants were cloned and expressed in Escherichia coli yielding high amounts of protein. The highest rHbI protein yield was obtained when the HbI cDNA was cloned into the pET28 (a+) expression vector, transformed into BLi5 cells, the induction performed with 1 mM IPTG at 30 degrees C and TB medium was supplemented with 30 microg/mL hemin chloride and 1% glucose. The highest yield obtained of HbI was 32 mg/L of culture using Fernbach flasks. UV/Visible spectral analysis showed that rHbI binds heme and ESI-MS shows that its molecular weight corresponds to the expected size. Kinetic studies with H2S confirmed that rHbI and HbI have identical binding properties, where the kON for the clam's Hb is 2.73x10(4)M-1s-1 and for rHbI is 2.43x10(4)M-1s-1.

Time-resolved visible and infrared study of the cyano complexes of myoglobin and of hemoglobin I from Lucina pectinata.

The dynamics of the ferric CN complexes of the heme proteins Myoglobin and Hemoglobin I from the clam Lucina pectinata upon Soret band excitation is monitored using infrared and broad band visible pump-probe spectroscopy. The transient response in the UV-vis spectral region does not depend on the heme pocket environment and is very similar to that known for ferrous proteins. The main feature is an instantaneous, broad, short-lived absorption signal that develops into a narrower red-shifted Soret band. Significant transient absorption is also observed in the 360-390 nm range. At all probe wavelengths the signal decays to zero with a longest time constant of 3.6 ps. The infrared data on MbCN reveal a bleaching of the C triple bond N stretch vibration of the heme-bound ligand, and the formation of a five-times weaker transient absorption band, 28 cm(-1) lower in energy, within the time resolution of the experiment. The MbC triple bond N stretch vibration provides a direct measure for the return of population to the ligated electronic (and vibrational) ground state with a 3-4 ps time constant. In addition, the CN-stretch frequency is sensitive to the excitation of low frequency heme modes, and yields independent information about vibrational cooling, which occurs on the same timescale.

Functional characterization of the purified holo form of hemoglobin I from Lucina pectinata overexpressed in Escherichia coli.

The clam Lucina pectinata inhabits the sulfide-rich west coast of the island of Puerto Rico. It contains three different hemoglobins. Hemoglobin I (HbI), which is monomeric at all concentrations, carries H2S in its ferric state. Overexpression of recombinant HbI from Lucina pectinata in BL21STAR(DE3) Escherichia coli cells was performed in the presence of delta-aminolevulinic acid (delta-ALA). Purification of the protein was achieved using FPLC anion exchange and size exclusion chromatography. Functional characterization of the recombinant holo-protein was assessed by detection of the protein heme O2, CO, and H2S derivatives by UV-Vis spectroscopy, with Soret maxima at 416, 421, and 425 nm, respectively. The results indicated that the recombinant HbI binds H2S and forms a heme sulfide complex like the HbI wild-type hemoglobin. Kinetic measurements were performed to determine the H2S affinity of the recombinant HbI. The H2S dissociation and association rate constants were 0.055 x 10(-3)s(-1) and 0.068 x 10(5) M(-1)s(-1), respectively. The H2S affinity constant of the recombinant HbI (0.124 x 10(9) M(-1)) is eightfold lower than that of the native clam HbI reported earlier. This effect is attributed mostly to the first of two missense mutations [Met 61 (E4)-->Val 61 and Ile101 (FG4)-->Val 101] and additional amino acids present in our construct as demonstrated by measurements of the association rate with a new construct lacking most of the additional residues and the missense mutations. The elimination of these residues restores the similarity between the expressed and wild-type hemoglobins, as evidenced by H2S association kinetics. A pH dependence on the H2S association rate was also contributing to the overall affinity constant and was taken into account in the measurements of the functional properties of the new HbI construct.