Tensile Strength and Elastic Modulus of Gutta-percha Cones Disinfected with Sodium Hypochlorite at Different Immersion Times: An In Vitro Comparative Study.

Aim: The tensile strength and modulus of elasticity of gutta-percha cones can be chemically altered due to disinfectant solutions. Therefore, the aim of the present study was to compare tensile strength and elastic modulus of gutta-percha cones subjected to sodium hypochlorite (NaOCl) disinfection at different times. Materials and Methods: This in vitro and longitudinal experimental study consisted of 45 gutta-percha cones, divided equally into three groups: Group 1 (disinfection with 2.5% NaOCl), Group 2 (disinfection with 5.25% NaOCl), and control group. All groups were subdivided according to immersion times for 1, 5, and 10 minutes. Tensile strength and elastic modulus were measured with a universal testing machine. For comparing more than two independent groups, parametric analysis of variance test with Sheffe's post hoc was used and for multivariate analysis, and multivariate analysis of variance test based on Pillai's Trace was used. In all statistical analysis, a significance level P ≤ 0.05 was considered. Results: When comparing the tensile strength of gutta-percha cones, no significant differences were observed after being immersed at 1, 5, and 10 minutes in NaOCl 2.5% (P = 0.715) and 5.25% (P = 0.585). Regarding the elastic modulus, a significant decrease (P < 0.05) was observed in those that were immersed in NaOCl 2.5% and 5.25% for 1, 5, and 10 minutes. Furthermore, increased NaOCl concentration significantly reduced the elastic modulus (P < 0.001). However, there were no significant differences in tensile strength (P > 0.05) and elastic modulus (P > 0.05), when evaluating the interaction between NaOCl concentration and time. Conclusion: Increasing NaOCl concentration significantly reduced the modulus of elasticity without affecting the tensile strength of gutta-percha cones, regardless of immersion time. Furthermore, the interaction of time and NaOCl concentration did not significantly affect the tensile strength and elastic modulus.

Shear bond strength of three different metal bracket base designs on human premolars: An in vitro comparative study.

Background: Adequate bracket-enamel bonding is critical to prevent detachment during orthodontic treatment and minimize any potential delay in results. The aim was to compare the shear bond strength of three metal bracket base designs: laser-structured base, mesh base, and retention grooves base. Material and Methods: In this experimental in vitro study, 54 human premolars were immersed for one week in 0.1% thymol solution, then placed in distilled water with weekly replacement until the start of the study. The premolars were cemented with brackets of varying base designs: A. Discovery® Smart (laser structured), B. Mini Master® Series (base with mesh), and C. Roth Max (base with retention grooves). All brackets were cemented using TransbondTM XT. A universal testing machine was used to evaluate the shear bond strength at a crosshead speed of 0.75 mm/min. Welch's one-factor ANOVA with robust variance and Tukey's post hoc test were used to compare means, with a significance level of p<0.05. Results: The average shear bond strength values were for the bracket with laser-structured base (14.78 ± 5.79 MPa), the bracket with mesh base (9.64 MPa ± 2.54 MPa) and the bracket with retention groove base (15.38 MPa ± 2.67 MPa). It was found that brackets with mesh bases had significantly lower shear bond strength than brackets with laser-structured bases (p=0.001) and brackets with retention grooves bases (p<0.001). No significant differences were observed between the latter two types of brackets (p = 0.893). Conclusions: The bracket base design influenced in vitro shear bond strength with significantly higher values observed for Roth Max and Discovery® Smart brackets compared to Mini Master® Series brackets. Key words:Shear strength, laser-structured bracket, bracket with mesh base, bracket with retention groove base.

Bond Strength and Failure Mode of Glass Fiber Posts with Different Surface Treatments Prior to Silanization: An In Vitro Comparative Study.

Aim: The use of chemical agents in the surface treatment of glass fiber posts can improve their bond strength to the root canal. The aim of this study was to assess the bond strength and failure mode of glass fiber posts that received different surface treatments prior to silanization. Materials and Methods: In this cross-sectional and in vitro experimental study, 50 human lower premolar roots were randomly divided into five groups and subsequently prepared to receive the cementation of a fiberglass post prior to silanization. They were distributed as group 1 (with 24% hydrogen peroxide), group 2 (with 37% phosphoric acid), group 3 (with 1.23% acidulated phosphate fluoride for 2 minutes), group 4 (with 1.23% acidulated phosphate fluoride for 6 minutes), and group 5 (without pretreatment). After cementation, the roots were sectioned into two discs for each cervical, middle, and apical region. Bond strength was assessed using the push out technique. Adhesive, mixed, and cohesive failure modes were also assessed. For data analysis, ANOVA and Tukey's post hoc tests were used, as well as Pearson's chi-square test. A significance of P < 0.05 was considered in all statistical analyses. Results: When comparing the bond strength of root regions, significant differences were obtained in groups pretreated with phosphoric acid (P = 0.018) and acidulated phosphate fluoride for 2 and 6 minutes (P = 0.001 and P = 0.000, respectively). Furthermore, significant differences were obtained between posts treated only with silane and those that received phosphoric acid pretreatment (P = 0.006) and acidulated phosphate fluoride for 6 minutes (P = 0.001). Significant association of mixed failure mode was observed with hydrogen peroxide (P = 0.014) and phosphoric acid (P = 0.006) pretreatments. Cohesive failure was significantly associated with acidulated phosphate fluoride pretreatment for 2 minutes (P = 0.032) and with posts that did not receive treatment prior to silanization (P = 0.000). Conclusion: Posts treated only with silane and pretreated with hydrogen peroxide and acidulated phosphate fluoride for 2 minutes presented significantly higher bond strength with respect to those pretreated with phosphoric acid and acidulated phosphate fluoride for 6 minutes. However, acidulated phosphate fluoride for 2 minutes and silane were associated with a better bonding type.

Surface Roughness in Nanoparticle Resin Composites Subjected to Two Polishing Systems: An In vitro Comparative Study.

Aim: The surface roughness of dental restorations can decrease resin durability, since it leads to its deterioration, color variation, and loss of gloss. Therefore, the aim was to assess the surface roughness of nanoparticle resin composites, subjected to two different polishing systems. Materials and Methods: This longitudinal in vitro experimental study consisted of 32 resin specimens made according to ISO 4049-2019 and divided equally into four groups: A1: Palfique LX5 / Sof-Lex, A2: Palfique LX5 / Super Snap, B1: Filtek Z350 XT / Sof-Lex, and B2: Filtek Z350 XT / Super Snap. The samples were stored in distilled water at 37°C for 24 h. Surface roughness was measured with a digital roughness tester, both before and after the polishing procedure. The data were analyzed with the Student's t-test for related samples, and with the inter-subject ANOVA test with two factors; considering significance at P < 0.05. Results: The surface roughness of Palfique LX5 resin with the Sof-lex system was 0.330 (CI: 0.282-0.378 µm) and 0.170 (CI: 0.087-0.253 µm) before and after polishing, respectively. With the Super Snap system, values of 0.448 (CI: 0.346-0.549 µm) and 0.206 (CI: 0.130-0.282 µm) were obtained before and after polishing, respectively. For the Filtek Z350 XT resin, the surface roughness obtained with the Sof-lex system was 0.353 (CI: 0.278-0.427 µm) and 0.134 (CI: 0.095-0.172 µm) before and after polishing, respectively. With the Super Snap system, values of 0.334 (CI: 0.247-0.421 µm) and 0.171 (CI: 0.122-0.221 µm) were obtained before and after polishing, respectively. Surface roughness did not show significant differences in all groups assessed both before (P = 0.068) and after (P = 0.335) polishing. However, before and after the application of the polishing systems, all groups significantly decreased their surface roughness (P < 0.05). Further, when comparing this decrease among all groups, no significant differences were observed (P = 0.437). Conclusion: The surface roughness of the Filtek Z350 XT and Palfique LX5 nanoparticle resin composites showed no significant differences when using the Sof-lex and Super Snap polishing systems. However, both polishing systems significantly decreased the surface roughness of the nanoparticulated resins, with this decrease being similar in all groups.

Sociodemographic Factors Associated with the Level of Knowledge of Early Postpartum Women about Oral Health Prevention in Infants Aged 0 to 2 Years Old: A Cross-Sectional Study under a Multivariable Analysis.

The objective was to evaluate the sociodemographic factors associated with the level of knowledge of early puerperal women about oral health prevention in infants. This cross-sectional and analytical study evaluated 303 early puerperal women from a hospital in the Peruvian capital. A validated 18-question questionnaire was used to measure the level of knowledge. A logistic regression model was used to evaluate the influence of age, marital status, educational level, number of children, monthly income, and having a dentist as a family member. A significance of p < 0.05 was considered. A total of 46.86%, 30.36%, and 22.77% of the puerperal had poor, fair, and good knowledge, respectively. The risk of having poor knowledge was two times higher (OR = 2.43; CI: 1.26-4.70) in early postpartum women aged 18 to 25 years than in those older than 35 years. Early postpartum women with no education, primary and secondary education were 11 times (OR = 11.76; CI: 2.41-57.43), 6 times (OR = 6.61; CI: 1.72-25.45), and 5 times (OR = 5.50; CI: 1.52-19.89), respectively, more likely to have significantly poor knowledge compared to those with university education. In conclusion, only a small minority of early postpartum women had a good knowledge of oral health prevention in infants aged 0 to 2 years. Younger and less educated puerperal were at greater risk of having little knowledge on this topic. Finally, not having basic education was the main risk factor identified.

Factors associated with knowledge about pharmacological management of pregnant women in Peruvian dental students: a logistic regression analysis.

BACKGROUND: Clinical management to maintain or restore oral health through the use of drugs during pregnancy is crucial, since at this stage physiological changes significantly influence the absorption, distribution and elimination of the drug, considering also that excessive administration of drugs during this period may have adverse effects on the mother and/or fetus. Therefore, the aim of the present study was to evaluate the factors associated with knowledge of pharmacological management of pregnant women in dental students of a Peruvian university located in the capital and province. METHODS: This analytical, cross-sectional, prospective and observational study assessed 312 Peruvian dental students from third to fifth year of study between February and April 2022. A validated questionnaire of 10 closed questions was used to measure knowledge about pharmacological management in pregnant women. A logit model was used to assess the influence of the variables: gender, age, year of study, marital status, place of origin and area of residence. A significance of p < 0.05 was considered. RESULTS: The 25.96, 55.13 and 18.91% of the dental students showed poor, fair and good knowledge about pharmacological management in pregnant women; respectively. In addition, it was observed that students under 24 years of age and those from the capital were significantly (p < 0.05) 44% less likely to have poor knowledge of pharmacological management in pregnant women compared to those aged 24 years or older (OR = 0.56; CI: 0.34-0.92) and those from the province (OR = 0.56; CI: 0.32-0.98); respectively. Finally, those in their third and fourth year of study were significantly three times more likely to have poor knowledge (OR = 3.17; CI: 1.68-5.97 and OR = 3.88; CI: 2.07-7.31; respectively) compared to fifth year dental students. CONCLUSION: The knowledge of dental students about pharmacological management in pregnant women was predominantly of fair level. In addition, it was observed that being under 24 years of age and being from the capital city were protective factors against poor knowledge, while being a third- and fourth-year student was a risk factor. Finally, gender, marital status and area of residence were not influential factors in the level of knowledge.

Sociodemographic factors associated with the level of knowledge about management of epileptic patients in Peruvian dental students: a cross-sectional study under a multivariable analysis.

BACKGROUND: Epilepsy is a chronic neurological disease that could indirectly affect oral health, and it is necessary for dentists to be familiar with the specific needs of patients with epilepsy. Therefore, aim of the present study was to assess the factors associated with the level of knowledge about management of epileptic patients in Peruvian dental students. METHODS: This analytical, observational, cross-sectional and prospective study assessed 312 dental students from a Peruvian university during February to April 2022. A validated questionnaire of 20 closed multiple-choice questions was used to measure the level of knowledge about dental management in epileptic patients. A logit model was used to assess the influence of variables: gender, age, year of study, marital status, place of origin and area of residence, with the level of knowledge in dental students considering a significance level of p < 0.05. RESULTS: Of the total, 28.8%, 36.2% and 34.9% had a poor, fair and good level of knowledge, respectively, about the dental treatment of epileptic patients. On the other hand, it was observed that being a woman (OR = 0.44, CI 0.26-0.75) and being a third year student (OR = 0.39, CI 0.21-0.74) and fourth year student (OR = 0.43, CI 0.23-0.89) constituted a protective factor against poor knowledge about the dental management of epileptic patients, while being from the capital city constituted a risk factor. Finally, age, marital status and the students' area of residence were not considered influential factors (p > 0.05). CONCLUSION: Most of the students showed a poor and fair level of knowledge about the dental management of epileptic patients, with gender, academic year and place of origin being influential factors. It is advisable that authorities and teachers in the dental profession organize recurrent training programs on the care of patients with chronic diseases requiring special attention, since knowing general concepts, pharmacological management and dental care of epileptic patients will allow future dentists to develop competencies to improve and implement good quality care protocols for this group of patients.

Surface Microhardness of Bulk-Fill Resin Composites Handled With Gloves.

AIM: It has been reported that resin composites may experience alterations in their mechanical properties when they come into contact with glove powder. Therefore, the present study aimed to compare the surface microhardness of 3 bulk-fill resin composites handled with latex and nitrile gloves prior to light curing. METHODS: This in vitro experimental study consisted of 90 resin composite specimens with a 6-mm diameter and a 4-mm height divided equally and randomly into 9 groups. Prior to light curing, the resin composites were handled with latex gloves, nitrile gloves, or only a spatula (control). Subsequently, the surface microhardness was measured with an Electronic Vickers Hardness Tester. The Kruskal-Wallis nonparametric H test with Bonferroni correction was used for comparisons. A significance level of 5% (P < .05) was considered. RESULTS: When comparing surface microhardness of each resin composite according to type of handling received, significant differences were observed in Filtek One Bulk Fill (P < .001) and Opus Bulk Fill (P < .001). In addition, these resin composites presented significantly higher surface microhardness than Tetric N-Ceram Bulk Fill resin (P < .05) when handled with latex gloves, nitrile gloves, and only a spatula. Finally, Filtek Bulk Fill resin presented significantly higher surface microhardness compared to Opus Bulk Fill resin when handled with nitrile gloves (P = .038) and a spatula only (P = .033). CONCLUSIONS: The surface microhardness of Filtek One Bulk Fill and Opus Bulk Fill resin composites decreased significantly when handled with latex or nitrile gloves, showing no variation in Tetric N-Ceram Bulk Fill resin composite. In addition, Filtek One Bulk Fill resin composite showed significantly higher surface microhardness than Opus Bulk Fill and Tetric N-Ceram Bulk Fill resin composites when handled with nitrile gloves. It is recommended that bulk-fill resin composites be handled with a spatula, because the use of latex or nitrile gloves could adversely affect their clinical performance.

Adhesive Strength in Dentin Conditioned with 18% Ethylenediaminetetraacetic Acid versus 35% Phosphoric Acid: In Vitro Study with 1-Year Artificial Aging.

The success and longevity of a resin composite restoration is determined by its good bonding to the tooth structure, with the adhesion being a challenge to dentin due to its complexity and structural heterogeneity. The present study aimed to compare the adhesive strength of dentin conditioned with 18% ethylenediaminetetraacetic acid (EDTA) versus 35% phosphoric acid (H3PO4) in human premolars. Materials and Methods: This in vitro experimental study was performed on 40 human premolars. The occlusal thirds were sectioned and randomly placed into four groups according to the type of dentin conditioning: Group 1 (control), Group 2 (18% EDTA), Group 3 (35% H3PO4) and Group 4 (18% EDTA plus 35% H3PO4). Then, 10,000 thermocycles between 5 +/− 2 °C and 55 +/− 2 °C were applied. Adhesive strength was tested by shearing with a digital universal testing machine at a crosshead speed of 0.75 mm/min. The values obtained were analyzed in megapascals (MPa). The mean and standard deviation were used as measures of central tendency and dispersion. In addition, a one-factor intergroup ANOVA test was applied with Tukey's post hoc test considering a significance level of p < 0.05. Results: The 18% EDTA and 18% EDTA plus 35% H3PO4 showed significantly higher adhesive strength compared to the control group that did not receive dentin conditioning (p = 0.047 and p < 0.001, respectively). However, the group conditioned with 18% EDTA did not present significant differences compared to the group conditioned with 35% H3PO4 (p = 0.997). In addition, the group conditioned with 18% EDTA plus 35% H3PO4 showed significantly higher adhesive strength compared to the groups conditioned with 18% EDTA (p = 0.002) and 35% H3PO4 (p = 0.001). Conclusion: The adhesion of bulk fill resin composite to dentin was favorable when preconditioning was performed using 18% EDTA followed by 35% H3PO4. In contrast, when both etchants were used separately, the bulk fill resin composite showed similar bond strength values in both cases, but significantly lower compared to their sequential application.

Psychometric evidence of a perception scale about covid-19 vaccination process in Peruvian dentists: a preliminary validation.

BACKGROUND: In the current pandemic context, dental professionals have greater occupational risks due to their healthcare activity, placing their expectations on the vaccine as a means of protection and at the same time hoping that the immunization process will be safe, reliable and comfortable, giving them greater peace of mind when they return to work. Therefore, the aim of the present study was to develop and provide a preliminary validation of a scale to measure perception of the COVID-19 vaccination process in Peruvian dental professionals. METHODS: Cross-sectional study with instrumental design. The scale was self-administered virtually. It was distributed through social networks to 220 dental professionals from two universities in the Peruvian capital between June and August 2021. The Aiken V was used for content analysis, while descriptive statistics such as mean, variance, kurtosis and skewness were used for construct validation, in addition to Pearson's correlation matrix for analysis of the 18 items. Subsequently, a Parallel Analysis based on minimum rank factor analysis was performed. Finally, the reliability of the total scale and its dimensions was evaluated with Cronbach's alpha. RESULTS: The Aiken V coefficient values were favorable for all items. Parallel analysis indicated the existence of three dimensions. Principal component analysis with rotation suggested grouping eight items for the first dimension, six items for the second dimension and four items for the third dimension. These dimensions showed good reliability, as Cronbach's alpha was 0.87, (95% confidence interval [CI]: 0.84-0.90), 0.80 (95% CI: 0.75-0.84) and 0.82 (95% CI: 0.78-0.86), respectively. In addition, the overall reliability of the scale was 0.89 (95% CI: 0.86-0.91), being acceptable. CONCLUSIONS: The perception scale of the COVID-19 vaccination process in dental professionals proved preliminarily to be a valid and reliable scale that can be used for research purposes. However, it is recommended to extend its application and evaluate its metric properties in other health professionals.

The Microhardness and Surface Roughness Assessment of Bulk-Fill Resin Composites Treated with and without the Application of an Oxygen-Inhibited Layer and a Polishing System: An In Vitro Study.

The aim of this study was to assess the microhardness and surface roughness of bulk-fill resin composites treated with and without the application of an oxygen-inhibited layer (OIL) and a polishing system. This in vitro experimental study consisted of 72 resin composite blocks divided into three groups: Tetric N-Ceram Bulk Fill, Opus Bulk Fill APS, and Filtek Bulk Fill. Each resin composite group was further divided into two subgroups: with and without OIL control. Subsequently, surface roughness and microhardness were measured before and after polishing. A t-test was used to compare independent and related measures. For the intergroup comparison of variation before and after polishing, the Kruskal−Wallis test with Bonferroni post hoc was used considering a significance level of p < 0.05. When comparing surface roughness, significant differences were observed between Opus Bulk Fill resin composite with and without OIL control (p = 0.003) before polishing. The same occurred when comparing Tetric N-Ceram resin composite with and without OIL control (p = 0.039) after polishing. In addition, the surface roughness of Filtek Bulk Fill, Opus Bulk Fill, and Tetric N-Ceram Bulk Fill resin composites, with and without OIL control, decreased significantly after polishing (p < 0.001), while surface microhardness significantly increased (p < 0.05), with the exception of Opus Bulk Fill resin with OIL control (p = 0.413). In conclusion, OIL control and polishing significantly improved the surface roughness and surface microhardness of Filtek Bulk Fill and Tetric N-Ceram Bulk Fill resin composites. However, in the case of Opus Bulk Fill resin composite, only its surface roughness was significantly improved.

Surface roughness and oxygen inhibited layer control in bulk-fill and conventional nanohybrid resin composites with and without polishing: in vitro study.

BACKGROUND: It has been demonstrated that dental restorations with rough surfaces can have several disadvantages such as pigment retention or plaque accumulation, which can facilitate caries formation, color variation, loss of brightness, degradation of restoration, among others. The present study aimed to assess surface roughness in bulk fill and conventional nanohybrid resins with and without polishing, controlling the oxygen inhibited layer. METHODS: This in vitro and longitudinal experimental study consisted of 120 resin blocks of 6 mm diameter and 4 mm depth, divided into two groups: Bulk Fill (Tetric® N-Ceram Bulk-fill, Opus Bulk Fill APS, Filtek™ Bulk Fill) and conventional nanohybrid (Tetric® N-Ceram, Opallis EA2, Filtek™ Z250 XT). Each resin group was divided into two equal parts, placing glycerin only on one of them, in order to control the oxygen inhibited layer. Subsequently, the surface roughness was measured before and after the polishing procedure with Sof-Lex discs. The data were analyzed with the T-test for related measures, and for comparison between groups before and after polishing, the non-parametric Kruskal Wallis test with the Bonferroni post hoc was used, considering a significance level of p < 0.05. RESULTS: Before polishing, the resin composites with the lowest surface roughness were Opus Bulk Fill APS (0.383 ± 0.186 µm) and Opallis EA2 (0.430 ± 0. 177 µm) with and without oxygen inhibited layer control, respectively; while after polishing, those with the lowest surface roughness were Opus Bulk Fill APS (0.213 ± 0.214 µm) and Tetric N-Ceram (0.097 ± 0.099 µm), with and without oxygen inhibited layer control, respectively. Furthermore, before and after polishing, all resins significantly decreased their surface roughness (p < 0.05) except Opus Bulk Fill APS resin with oxygen inhibited layer control (p = 0.125). However, when comparing this decrease among all groups, no significant differences were observed (p < 0.05). CONCLUSION: The Opus Bulk Fill APS resin with oxygen inhibited layer control presented lower surface roughness both before and after polishing, being these values similar at both times. However, after polishing the other bulk fill and conventional nanohybrid resins with and without oxygen inhibited layer control, the surface roughness decreased significantly in all groups, being this decrease similar in all of them.

Insulin receptor activation by proinsulin preserves synapses and vision in retinitis pigmentosa.

Synaptic loss, neuronal death, and circuit remodeling are common features of central nervous system neurodegenerative disorders. Retinitis pigmentosa (RP), the leading cause of inherited blindness, is a group of retinal dystrophies characterized by photoreceptor dysfunction and death. The insulin receptor, a key controller of metabolism, also regulates neuronal survival and synaptic formation, maintenance, and activity. Indeed, deficient insulin receptor signaling has been implicated in several brain neurodegenerative pathologies. We present evidence linking impaired insulin receptor signaling with RP. We describe a selective decrease in the levels of the insulin receptor and its downstream effector phospho-S6 in retinal horizontal cell terminals in the rd10 mouse model of RP, as well as aberrant synapses between rod photoreceptors and the postsynaptic terminals of horizontal and bipolar cells. A gene therapy strategy to induce sustained proinsulin, the insulin precursor, production restored retinal insulin receptor signaling, by increasing S6 phosphorylation, without peripheral metabolic consequences. Moreover, proinsulin preserved photoreceptor synaptic connectivity and prolonged visual function in electroretinogram and optomotor tests. These findings point to a disease-modifying role of insulin receptor and support the therapeutic potential of proinsulin in retinitis pigmentosa.

Intracellular Mechanical Drugs Induce Cell-Cycle Altering and Cell Death.

Current advances in materials science have demonstrated that extracellular mechanical cues can define cell function and cell fate. However, a fundamental understanding of the manner in which intracellular mechanical cues affect cell mechanics remains elusive. How intracellular mechanical hindrance, reinforcement, and supports interfere with the cell cycle and promote cell death is described here. Reproducible devices with highly controlled size, shape, and with a broad range of stiffness are internalized in HeLa cells. Once inside, they induce characteristic cell-cycle deviations and promote cell death. Device shape and stiffness are the dominant determinants of mechanical impairment. Device structural support to the cell membrane and centering during mitosis maximize their effects, preventing spindle centering, and correct chromosome alignment. Nanodevices reveal that the spindle generates forces larger than 114 nN which overcomes intracellular confinement by relocating the device to a less damaging position. By using intracellular mechanical drugs, this work provides a foundation to defining the role of intracellular constraints on cell function and fate, with relevance to fundamental cell mechanics and nanomedicine.

Psychological distress facing the COVID-19 pandemic in dental interns from the Peruvian capital: A cross-sectional study under a multivariable regression model.

Aim: Psychological distress can be considered a maladaptive response to a stressful situation that occurs when external events or stressors impose demands that cannot be coped with. Therefore, the aim of the present study was to evaluate the sociodemographic factors associated with psychological distress in dental interns from the Peruvian capital facing the COVID-19 pandemic. Materials and methods: This analytical, observational, cross-sectional study was conducted on 392 Stomatology interns from the Peruvian capital from June to July 2022. The validated COVID-19 Peritraumatic Distress Index (CPDI) scale to detect the levels of psychological distress consisted of four dimensions: negative mood, changes in behavior and cognitive skills, fatigue and hyperreactivity, and somatization. Pearson's chi-square and Fisher's exact test were used for bivariable analysis. In addition, a logit model was used to assess the influence of variables: sex (X1), age group (X2), marital status (X3), monthly economic income (X4), working area in the capital city (X5), and living with people vulnerable to COVID-19 (X6), with the psychological distress levels, considering a significance p < 0.05. Results: The prevalence of psychological distress in dental interns was severe in 6.4% [95% confidence interval (CI): 3.9-8.8%] and mild in 37.8% (95% CI: 33.0-42.6%). According to bivariable analysis, the levels of psychological distress by COVID-19 were not significantly associated with sex (p = 0.190), age group (p = 0.418), marital status (p = 0.554), monthly economic income (p = 0.327), working area in the capital city (p = 0.993), and living with people vulnerable to COVID-19 (p = 0.134). In addition, according to the logistic regression analysis, none of the variables studied was considered an influential factor (p > 0.05) in psychological distress presented by dental interns. Conclusion: The 44.2% of dental interns from the Peruvian capital presented psychological distress facing the COVID-19 pandemic, without any of the possible associated variables of this study significantly affecting this behavioral disorder.

Effect of 16% Carbamide Peroxide and Activated-Charcoal-Based Whitening Toothpaste on Enamel Surface Roughness in Bovine Teeth: An In Vitro Study.

Background: Activated charcoal is a nanocrystalline form of carbon with a large specific surface area and high porosity in the nanometer range, having consequently the capacity to absorb pigments, chromophores, and stains responsible for tooth color change, while carbamide peroxide is unstable and breaks down immediately upon contact with tissue and saliva, first dissociating into hydrogen peroxide and urea and subsequently into oxygen, water, and carbon dioxide. Therefore, the aim of the present study was to assess the effect of 16% carbamide peroxide and activated-charcoal-based whitening toothpaste on enamel surface roughness in bovine teeth. Materials and Methods: The present experimental in vitro, longitudinal, and prospective study consisted of 60 teeth randomly distributed in six groups: A: artificial saliva, B: conventional toothpaste (Colgate Maximum Protection), C: whitening toothpaste with activated charcoal (Oral-B 3D White Mineral Clear), D: 16% carbamide peroxide (Whiteness Perfect 16%), E: 16% carbamide peroxide plus conventional toothpaste (Whiteness Perfect 16% plus Colgate Maximum Protection), and F: 16% carbamide peroxide plus whitening toothpaste with activated charcoal (Whiteness Perfect 16% plus Oral-B 3D White Mineral Clear). Surface roughness was assessed with a digital roughness meter before and after each treatment. For the statistical analysis, Student's t test for related samples was used, in addition to the ANOVA test for one intergroup factor, considering a significance level of p < 0.05. Results: The surface roughness variation of bovine tooth enamel, before and after application of bleaching agent, was higher in groups of whitening toothpaste with activated charcoal (0.200 µm, Confidence Interval (CI): 0.105; 0.296 µm) and 16% carbamide peroxide plus whitening toothpaste with activated charcoal (0.201 µm, (CI): 0.092; 0.309 µm). In addition, bovine teeth treated with conventional toothpaste (p = 0.041), whitening toothpaste with activated charcoal (p = 0.001), and 16% carbamide peroxide plus whitening toothpaste with activated charcoal (p = 0.002) significantly increased their surface roughness values. On the other hand, significant differences were observed when comparing the variation in surface roughness between the application of artificial saliva (control) and the whitening toothpaste with activated charcoal (p = 0.031), and the 16% carbamide peroxide plus whitening toothpaste with activated charcoal (p = 0.030). Conclusion: The use of whitening toothpaste with activated charcoal and in combination with 16% carbamide peroxide significantly increased enamel surface roughness in bovine teeth.

Low-intensity continuous ultrasound to inhibit cancer cell migration.

In recent years, it has been verified that collective cell migration is a fundamental step in tumor spreading and metastatic processes. In this paper, we demonstrate for the first time how low-intensity ultrasound produces long-term inhibition of collective migration of epithelial cancer cells in wound healing processes. In particular, we show how pancreatic tumor cells, PANC-1, grown as monolayers in vitro respond to these waves at frequencies close to 1 MHz and low intensities (<100 mW cm-2) for 48-72 h of culture after some minutes of a single ultrasound irradiation. This new strategy opens a new line of action to block the spread of malignant cells in cancer processes. Despite relevant spatial variations of the acoustic pressure amplitude induced in the assay, the cells behave as a whole, showing a collective dynamic response to acoustic performance. Experiments carried out with samples without previous starving showed remarkable effects of the LICUs from the first hours of culture, more prominent than those with experiments with monolayers subjected to fasting prior to the experiments. This new strategy to control cell migration demonstrating the effectiveness of LICUS on not starved cells opens a new line of action to study effects of in vivo ultrasonic actuation on tumor tissues with malignant cells. This is a proof-of-concept study to demonstrate the physical effects of ultrasound stimulation on tumor cell migration. An in-depth biological study of the effects of ultrasounds and underlying biological mechanisms is on-going but out of the scope of this article.

Three-dimensional numerical analysis as a tool for optimization of acoustophoretic separation in polymeric chips.

Polymeric separators have been developed since 2010 to produce acoustophoretic separation of particles or cells in suspension with high efficiency. They rely on three-dimensional (3D) resonances of their whole structure actuated by ultrasounds. In this paper, a numerical 3D analysis is presented and validated as the only tool for optimization of these polymeric chips to perform efficient separation applications. In contrast to conventional acoustophoretic techniques based on the establishment of standing waves in the liquid phase of the channel (requiring rigid chip materials, such as silicon or glass), whole-structure resonances of the chip allow the use of materials that are acoustically soft and of low acoustic impedance, which is close to that of the liquid samples hosted. The resonance requirement is not restricted to the liquid phase in the polymeric chips, but it extends to the 3D whole structure, allowing any material. It provides significant advantages in the design and manufacture of our chips, allowing the use of low-cost materials and cheap manufacturing processes and even printing of devices. The extraordinary complexity of their multiple resonances requires theoretical approaches to optimize their acoustophoretic performance. Hence, the importance of 3D numerical analyses, which are capable of predicting the acoustic behavior of these chips, is to perform acoustophretica separation in suspensions.

The Value of Information Searching against Fake News.

Inspired by the Daley-Kendall and Goffman-Newill models, we propose an Ignorant-Believer-Unbeliever rumor (or fake news) spreading model with the following characteristics: (i) a network contact between individuals that determines the spread of rumors; (ii) the value (cost versus benefit) for individuals who search for truthful information (learning); (iii) an impact measure that assesses the risk of believing the rumor; (iv) an individual search strategy based on the probability that an individual searches for truthful information; (v) the population search strategy based on the proportion of individuals of the population who decide to search for truthful information; (vi) a payoff for the individuals that depends on the parameters of the model and the strategies of the individuals. Furthermore, we introduce evolutionary information search dynamics and study the dynamics of population search strategies. For each value of searching for information, we compute evolutionarily stable information (ESI) search strategies (occurring in non-cooperative environments), which are the attractors of the information search dynamics, and the optimal information (OI) search strategy (occurring in (eventually forced) cooperative environments) that maximizes the expected information payoff for the population. For rumors that are advantageous or harmful to the population (positive or negative impact), we show the existence of distinct scenarios that depend on the value of searching for truthful information. We fully discuss which evolutionarily stable information (ESI) search strategies and which optimal information (OI) search strategies eradicate (or not) the rumor and the corresponding expected payoffs. As a corollary of our results, a recommendation for legislators and policymakers who aim to eradicate harmful rumors is to make the search for truthful information free or rewarding.

Influence of Hydrodynamics and Hematocrit on Ultrasound-Induced Blood Plasmapheresis.

Acoustophoretic blood plasma separation is based on cell enrichment processes driven by acoustic radiation forces. The combined influence of hematocrit and hydrodynamics has not yet been quantified in the literature for these processes acoustically induced on blood. In this paper, we present an experimental study of blood samples exposed to ultrasonic standing waves at different hematocrit percentages and hydrodynamic conditions, in order to enlighten their individual influence on the acoustic response of the samples. The experiments were performed in a glass capillary (700 µm-square cross section) actuated by a piezoelectric ceramic at a frequency of 1.153 MHz, hosting 2D orthogonal half-wavelength resonances transverse to the channel length, with a single-pressure-node along its central axis. Different hematocrit percentages Hct = 2.25%, 4.50%, 9.00%, and 22.50%, were tested at eight flow rate conditions of Q = 0:80 µL/min. Cells were collected along the central axis driven by the acoustic radiation force, releasing plasma progressively free of cells. The study shows an optimal performance in a flow rate interval between 20 and 80 µL/min for low hematocrit percentages Hct ≤ 9.0%, which required very short times close to 10 s to achieve cell-free plasma in percentages over 90%. This study opens new lines for low-cost personalized blood diagnosis.