RESUMO
The objective of this study was to determine relationships between intraoperative posterior cruciate ligament (PCL) sacrificing posterior stabilized (PS) total knee arthroplasty (TKA) laxity measurements throughout flexion and patient outcomes at 2 years post-TKA and to define clinically relevant laxity thresholds to optimize patient outcomes.In a single-surgeon study, PCL sacrificing TKA using a robotics-assisted platform with a digital joint tensioning device was performed in 115 knees in 115 patients. Final intraoperative joint laxity was recorded, and 2-year Knee Injury and Osteoarthritis Outcome Scores (KOOSs) were obtained. A Simulated Annealing optimization algorithm was used to identify medial and lateral laxity windows which maximized the 2-year KOOS pain score. Wilcoxon nonparametric tests were used to compare outcomes between groups.Significant associations were found between intraoperative joint laxity and 2-year KOOS pain outcomes throughout flexion. Clinically relevant laxity windows were defined medially and laterally in mid-flexion and flexion for improved outcomes, whereas only a lateral laxity window could be defined in extension. When all laxity windows were satisfied, a 14.5-KOOS point improvement was found (97.2 vs. 77.8, p = 0.0060) compared to knees which did not satisfy any window. Improvements in Activities of Daily Living (Δ8.8, p = 0.0143), Sports (Δ22.5, p = 0.0108), and Quality of Life (Δ18.7, p = 0.0011) KOOS subscores were also found in knees which satisfied all windows versus 0-1 window.Intraoperative joint laxity is associated with postoperative outcomes in a PS knee design, wherein patients balanced within identified laxity targets reported improved outcomes over those that did not. Clinically significant thresholds were defined and were predominately found in mid-flexion and flexion for medial and lateral laxity. When target windows were combined further improved outcomes were identified.
RESUMO
[This corrects the article DOI: 10.1016/j.artd.2022.06.020.].
RESUMO
Aims: Spinopelvic pathology increases the risk for instability following total hip arthroplasty (THA), yet few studies have evaluated how pathology varies with age or sex. The aims of this study were: 1) to report differences in spinopelvic parameters with advancing age and between the sexes; and 2) to determine variation in the prevalence of THA instability risk factors with advancing age. Methods: A multicentre database with preoperative imaging for 15,830 THA patients was reviewed. Spinopelvic parameter measurements were made by experienced engineers, including anterior pelvic plane tilt (APPT), spinopelvic tilt (SPT), sacral slope (SS), lumbar lordosis (LL), and pelvic incidence (PI). Lumbar flexion (LF), sagittal spinal deformity, and hip user index (HUI) were calculated using parameter measurements. Results: With advancing age, patients demonstrate increased posterior APPT, decreased standing LL, decreased LF, higher pelvic incidence minus lumbar lordosis (PI-LL) mismatch, higher prevalence of abnormal spinopelvic mobility, and higher HUI percentage. With each decade, APPT progressed posteriorly 2.1°, LF declined 6.0°, PI-LL mismatch increased 2.9°, and spinopelvic mobility increased 3.8°. Significant differences were found between the sexes for APPT, SPT, SS, LL, and LF, but were not felt to be clinically relevant. Conclusion: With advancing age, spinopelvic biomechanics demonstrate decreased spinal mobility and increased pelvic/hip mobility. Surgeons should consider the higher prevalence of instability risk factors in elderly patients and anticipate changes evolving in spinopelvic biomechanics for young patients.
Assuntos
Artroplastia de Quadril , Humanos , Masculino , Feminino , Idoso , Pessoa de Meia-Idade , Adulto , Fatores Etários , Fatores de Risco , Idoso de 80 Anos ou mais , Instabilidade Articular/fisiopatologia , Articulação do Quadril/diagnóstico por imagem , Articulação do Quadril/fisiopatologia , Fatores Sexuais , Coluna Vertebral/diagnóstico por imagem , Envelhecimento/fisiologia , Lordose/diagnóstico por imagem , Lordose/fisiopatologia , Estudos Retrospectivos , Vértebras Lombares/diagnóstico por imagemRESUMO
BACKGROUND: The coronal plane alignment of the knee (CPAK) classification was first developed using long leg radiographs (LLR) and has since been reported using image-based and imageless robotic total knee arthroplasty (TKA) systems. However, the correspondence between imageless robotics and LLR-derived CPAK parameters has yet to be investigated. This study therefore examined the differences in CPAK parameters determined with LLR and imageless robotic navigation using either generic or optimized cartilage wear assumptions. METHODS: Medial proximal tibial angle (MPTA) and lateral distal femoral angle (LDFA) were determined from the intraoperative registration data of 61 imageless robotic TKAs using either a generic 2 mm literature-based wear assumption (Navlit) or an optimized wear assumption (Navopt) found using an error minimization algorithm. MPTA and LDFA were also measured from preoperative LLR by two observers and intraclass correlation coefficients (ICCs) were calculated. MPTA, LDFA, joint line obliquity (JLO), and arithmetic hip-knee-ankle angle (aHKA) were compared between the robotic and the average LLR measurements over the two observers. RESULTS: ICCs between observers for LLR were over 0.95 for MPTA, LDFA, JLO, and aHKA, indicating excellent agreement. Mean CPAK differences were not significant between LLR and Navlit (all differences within 0.6°, P > 0.1) or Navopt (all within 0.1°, P > 0.83). Mean absolute errors (MAE) between LLR and Navlit were: LDFA = 1.4°, MPTA = 2.0°, JLO = 2.1°, and aHKA = 2.7°. Compared to LLR, the generic wear classified 88% and the optimized wear classified 94% of knees within one CPAK group. Bland-Altman comparisons reported good agreement for LLR vs. Navlit and Navopt, with > 95% and > 91.8% of measurements within the limits of agreement across all CPAK parameters, respectively. CONCLUSIONS: Imageless robotic navigation data can be used to calculate CPAK parameters for arthritic knees undergoing TKA with good agreement to LLR. Generic wear assumptions determined MPTA and LDFA with MAE within 2° and optimizing wear assumptions showed negligible improvement.
RESUMO
PURPOSE: The relationship between constitutional coronal alignment and implant positioning on trochlear groove restoration in total knee arthroplasty (TKA) is poorly understood. This study aimed to determine whether the choice of alignment philosophy significantly affects the restoration of the trochlea groove. METHODS: Sixty-one imageless robotic TKAs performed by a single orthopaedic surgeon were retrospectively reviewed. In each case, the entire native trochlea was digitized to generate the native femoral anatomy, and implants were planned according to a functional alignment (FA) technique. Final implant position was recorded using the validated bone resection planes from the navigation system. Simulated femoral component positions were generated according to previously described alignment techniques: mechanical alignment (MA), gap balancing (GB), kinematic alignment (KA), restricted kinematic alignment (rKA) and restricted inverse kinematic alignment (riKA). Trochlear angle (TA), trochlear under/overstuffing and mediolateral sulcus offset were compared between the six simulated alignment techniques, as well as the final implanted technique. Further analyses investigated the effect of preoperative coronal alignment on trochlear position. Comparisons were assessed with an analysis of variance and Welch's t-tests or Wilcoxon's rank-sum tests with Bonferroni corrections. RESULTS: The implanted and simulated techniques all resulted in greater TA valgus compared to the native groove (p < 0.001). The implanted technique, KA and rKA were closer to the native TA than GB, MA and riKA (p > 0.001). All alignment philosophies understuffed the native trochlea groove. KA and rKA understuffed less than all other techniques (p < 0.001), and GB understuffed more than all other techniques (p < 0.001). In extension, all techniques shifted the trochlear sulcus laterally, while in flexion, they medialized it. These effects were most prominent in GB and MA. CONCLUSION: Personalized alignment techniques such as KA and rKA, which consider variations in individual anatomy, best restore the native patellar groove compared to systematic alignment techniques when using a standardized femoral component. LEVEL OF EVIDENCE: Level III, retrospective review.
Assuntos
Artroplastia do Joelho , Prótese do Joelho , Osteoartrite do Joelho , Humanos , Artroplastia do Joelho/métodos , Articulação do Joelho/cirurgia , Estudos Retrospectivos , Fêmur/cirurgia , Fenômenos Biomecânicos , Osteoartrite do Joelho/cirurgiaRESUMO
PURPOSE: The purpose of this study was to investigate the influence of increasing the tibial boundaries in functional alignment on femoral component orientation in total knee arthroplasty (TKA). METHODS: A retrospective review of a database of robotic-assisted TKAs using a digital joint tensioning device was performed (BalanceBot®; Corin). A total of 692 TKAs with correctable deformity were included. Functional alignment with a tibia-first balancing technique was simulated by performing an anatomic tibial resection to recreate the native medial proximal tibial angle within certain boundaries (A, 87-90°; B, 86-90°; C, 84-92°), while accounting for wear. After balancing the knee, the resulting amount of femoral component outliers in the coronal and axial plane was calculated for each group and correlated to the coronal plane alignment of the knee (CPAK) classification. RESULTS: The proportion of knees with high femoral component varus (>96°) or valgus (<87°) alignment increased from 24.5% (n = 170) in group A to 26.5% (n = 183) in group B and 34.2% (n = 237) in group C (p < 0.05). Similarly, more knees with high femoral component external rotation (>6°) or internal rotation (>3°) were identified in group C (33.4%, n = 231) than in group B (23.7%, n = 164) and A (18.4%, n = 127) (p < 0.05). There was a statistically significant (p < 0.01) overall increase in knees with both femoral component valgus <87° and internal rotation >3° from group A (4.0%, n = 28) to B (7.7%, n = 53) and C (15.8%, n = 109), with CPAK type I and II showing a 12.9- and 2.9-fold increase, respectively. CONCLUSION: Extending the tibial boundaries when using functional alignment with a tibia-first balancing technique in TKA leads to a statistically significant higher percentage of knees with a valgus lateral distal femoral angle < 87° and >3° internal rotation of the femoral component, especially in CPAK type I and II. LEVEL OF EVIDENCE: Level IV.
Assuntos
Artroplastia do Joelho , Prótese do Joelho , Osteoartrite do Joelho , Humanos , Artroplastia do Joelho/métodos , Tíbia/cirurgia , Articulação do Joelho/cirurgia , Fêmur/cirurgia , Estudos Retrospectivos , Osteoartrite do Joelho/cirurgiaRESUMO
PURPOSE: The purpose of this study is to evaluate the in vivo medial and lateral joint laxities across various total knee arthroplasty (TKA) alignment categories correlated to (1) hip-knee-ankle angle, (2) proximal tibial angle and (3) distal femoral angle in a consecutive group of patients undergoing robotic-assisted TKA. METHODS: Using ligament tensions acquired during 805 robotic-assisted TKA with a dynamic ligament tensor under a load of 70-90 N, the relationship between medial and lateral collateral ligament laxity and overall limb alignment was established. Only knees with neutral or mechanical varus alignment were included and divided into five groups: neutral (0°-3°), varus 3°-5°, varus 6°-9°, varus 10°-13° and varus ≥14°. Groups were further subdivided by the intraoperative medial proximal tibial angle (MPTA) and lateral distal femoral angle (LDFA). The distraction of the medial and lateral sides was compared across the various alignments using an analysis of variance. RESULTS: The ability to distract the medial collateral ligament in extension and flexion was proportional to the degree of varus deformity, increasing from 4.0 ± 2.3 mm in the neutral group to 8.7 ± 3.2 mm in the varus ≥14° group (p < 0.0001). On the lateral side, the distraction of the lateral collateral ligament decreased in both extension (2.2 ± 2.4 vs. 1.2 ± 2.7, p < 0.0001) and flexion (2.8 ± 2.8 to 1.7 ± 3.0, p < 0.0001) with increasing native varus deformity. MPTA and LDFA had similar effects, where increasing MPTA varus and LDFA valgus increased medial distractibility in extension and flexion. There was significant variability of the stretch of the ligaments within and across all alignment categories, in which the standard deviation of the groups ranged from 2.0 to 3.0 mm. CONCLUSION: This study demonstrates increased medial ligament distractibility with increasing varus deformity. However, there was significant variability in ligamentous laxity within various limb alignment categories suggesting the anatomy and soft tissue identity of the knee is complex and highly variable. TKAs seeking to be more anatomic will not only need to restore alignment but also native soft tissue tensions. LEVEL OF EVIDENCE: Level III, prognostic.
Assuntos
Artroplastia do Joelho , Instabilidade Articular , Articulação do Joelho , Humanos , Artroplastia do Joelho/métodos , Feminino , Masculino , Articulação do Joelho/cirurgia , Articulação do Joelho/fisiopatologia , Idoso , Instabilidade Articular/cirurgia , Pessoa de Meia-Idade , Procedimentos Cirúrgicos Robóticos , Amplitude de Movimento Articular , Ligamento Colateral Médio do Joelho/cirurgia , Fenômenos Biomecânicos , Tíbia/cirurgia , Fêmur/cirurgiaRESUMO
Aims: Excessive posterior pelvic tilt (PT) may increase the risk of anterior instability after total hip arthroplasty (THA). The aim of this study was to investigate the changes in PT occurring from the preoperative supine to postoperative standing position following THA, and identify factors associated with significant changes in PT. Methods: Supine PT was measured on preoperative CT scans and standing PT was measured on preoperative and one-year postoperative standing lateral radiographs in 933 patients who underwent primary THA. Negative values indicate posterior PT. Patients with > 13° of posterior PT from preoperative supine to postoperative standing (ΔPT ≤ -13°) radiographs, which corresponds to approximately a 10° increase in functional anteversion of the acetabular component, were compared with patients with less change (ΔPT > -13°). Logistic regression analysis was used to assess preoperative demographic and spinopelvic parameters predictive of PT changes of ≤ -13°. The area under receiver operating characteristic curve (AUC) determined the diagnostic accuracy of the predictive factors. Results: PT changed from a mean of 3.8° (SD 6.0°)) preoperatively to -3.5° (SD 6.9°) postoperatively, a mean change of -7.4 (SD 4.5°; p < 0.001). A total of 95 patients (10.2%) had ≤ -13° change in PT from preoperative supine to postoperative standing. The strongest predictive preoperative factors of large changes in PT (≤ -13°) from preoperative supine to postoperative standing were a large posterior change in PT from supine to standing, increased supine PT, and decreased standing PT (p < 0.001). Flexed-seated PT (p = 0.006) and female sex (p = 0.045) were weaker significant predictive factors. When including all predictive factors, the accuracy of the AUC prediction was 84.9%, with 83.5% sensitivity and 71.2% specificity. Conclusion: A total of 10% of patients had > 13° of posterior PT postoperatively compared with their supine pelvic position, resulting in an increased functional anteversion of > 10°. The strongest predictive factors of changes in postoperative PT were the preoperative supine-to-standing differences, the anterior supine PT, and the posterior standing PT. Surgeons who introduce the acetabular component with the patient supine using an anterior approach should be aware of the potentially large increase in functional anteversion occurring in these patients.
Assuntos
Artroplastia de Quadril , Posição Ortostática , Humanos , Feminino , Artroplastia de Quadril/efeitos adversos , Postura , Postura Sentada , Acetábulo/diagnóstico por imagem , Acetábulo/cirurgiaRESUMO
The optimal force applied during ligament balancing in total knee arthroplasty (TKA) is not well understood. We quantified the effect of increasing distraction force on medial and lateral gaps throughout the range of knee motion, both prior to and after femoral resections in tibial-first gap-balancing TKA. Twenty-five consecutive knees in 21 patients underwent robotic-assisted TKA. The posterior cruciate ligament was resected, and the tibia was cut neutral to the mechanical axis. A digital ligament tensioning tool recorded gaps and applied equal mediolateral loads of 70 N (baseline), 90 N, and 110 N from 90 degrees to full extension. A gap-balancing algorithm planned the femoral implant position to achieve a balanced knee throughout flexion. After femoral resections, gap measurements were repeated under the same conditions. Paired t-tests identified gap differences between load levels, medial/lateral compartments, and flexion angle. Gaps increased from 0 to 20 degrees in flexion, then remain consistent through 90 degrees of flexion. Baseline medial gap was significantly smaller than lateral gap throughout flexion (p <0.05). Increasing load had a larger effect on the lateral versus medial gaps (p <0.05) and on flexion versus extension gaps. Increasing distraction force resulted in non-linear and asymmetric gap changes mediolaterally and from flexion to extension. Digital ligament tensioning devices can give better understanding of the relationship between joint distraction, ligament tension, and knee stiffness throughout the range of flexion. This can aid in informed surgical decision making and optimal soft tissue tensioning during TKA.
Assuntos
Artroplastia do Joelho , Prótese do Joelho , Osteoartrite do Joelho , Procedimentos Cirúrgicos Robóticos , Humanos , Artroplastia do Joelho/métodos , Procedimentos Cirúrgicos Robóticos/métodos , Osteoartrite do Joelho/cirurgia , Articulação do Joelho/cirurgia , Ligamentos Articulares/cirurgia , Amplitude de Movimento Articular , Fenômenos BiomecânicosRESUMO
BACKGROUND: While modern hip replacement planning relies on hip motion simulation (HMS), it lacks the capability to include soft-tissues and ligaments restraints on computed bony range of motion (BROM), often leading to an overestimation of the in-vivo functional range of motion (FROM). Furthermore, there is a lack of literature on BROM assessment in relation to FROM. Therefore, the study aimed to assess computed BROM using in-vitro cadaver-derived FROM measurements, registered to a CT-based in-house HMS, and to further investigate the effect of functional and anatomical hip joint centres (FHJC and AHJC) on BROM. METHOD: Seven limiting and three non-limiting circumducted passive FROM of four cadaver hips were measured using optical coordinate measuring machine with reference spheres (RSs) affixed to the pelvis and the femur, following CT-scan of the specimen. The RSs' centres were used to register the measured FROM in HMS, enabling its virtual recreation to compute corresponding BROM by detecting nearest bony impingement. FHJC, estimated from non-limiting FROM, was compared with AHJC to examine their positional differences and effect on BROM. RESULTS: Differences in BROM and FROM were minimal in deep flexion (3.0° ± 4.1°) and maximum internal rotation (IR) at deep flexion (3.0° ± 2.9°), but substantially greater in extension (53.2° ± 9.5°). Bony impingement was observed during flexion, and IR at deep flexion for two hips. The average positional difference between FHJC and AHJC was 3.1 ± 1.2 mm, resulting in BROM differences of 1°-13° across four motions. CONCLUSIONS: The study provided greater insight into the applicability and reliability of computed BROM in pre-surgical planning.
Assuntos
Articulação do Quadril , Humanos , Reprodutibilidade dos Testes , Articulação do Quadril/cirurgia , Amplitude de Movimento Articular , Simulação por Computador , CadáverRESUMO
BACKGROUND: Early complications in total knee arthroplasty (TKA) associated with modern robotics platforms integrated with digital balancing technology have not been investigated. OBJECTIVE: The objective was to compare 90-day complication rates between a manual technique and a modern robotic-assisted ligament balancing TKA platform. METHODS: 895 primary TKA procedures from a single surgeon were retrospectively reviewed (614 manual TKA, 281 using a modern robotics platform with an integrated digitally controlled ligament balancing device). Post-operative complications within the 90-day episode of care were recorded by the Michigan Arthroplasty Registry Collaborative Quality Initiative. Differences in complication rates between techniques were further divided into inpatient hospital, outpatient hospital, and ambulatory surgery center (ASC) cohorts. RESULTS: In the pooled hospital cohort and inpatient hospital cohort, 'Return to OR' was significantly lower for the robotic assisted group (1.3% vs 5.2% and 0% vs 4.9%, respectively, p< 0.0370). Specifically, the need for manipulation under anesthesia (MUA) was reduced for the robotics group (0.0% vs 2.5%, p= 0.0352). No differences in overall complication rate or cause of complication was found between manual and robotics cases for the hospital outpatient and ASC cohorts (p⩾ 0.68). CONCLUSION: Within the hospital setting, robotic assisted ligament balancing technology was associated with reduced 90-day postoperative complications for 'Return to OR' and MUA.
RESUMO
BACKGROUND: Passive smartphone-based apps are becoming more common for measuring patient progress after total hip arthroplasty (THA). Optimum activity levels during early THA recovery have not been well documented. OBJECTIVES: Correlations between step-count and patient reported outcome measures (PROMs) during early recovery were explored. This study also investigated how demographics impact step-count during early post-operative recovery. METHODS: Smartphone captured step-count data from 666 THA patients was retrospectively reviewed. Mean age was 64 ± 11 years. 55% were female. Mean BMI was 29 ± 8kg/m2. Mean daily step-count was calculated for each patient over four time-windows: 60 days prior to surgery (preop), 42-49 days postop (6 weeks), 91-98 days postop (3 months), and 183-197 days postop (6 months). Spearman correlation coefficients and linear regression were used to assess the association between PROMs (HOOS-12, HOOS-Jr, and UCLA) were performed. Patients were separated into three step-count levels: low (< 2500 steps/day), medium (2500-5500 steps/day), and high (> 5500 steps/day). Age > 65 years, BMI > 35 kg/m2, and sex were used for demographic comparisons. Post hoc analyses were performed using Welch's unequal variances t-tests, or Wilcoxon rank-sum tests, both with Bonferroni corrections, where appropriate when comparing between groups. Chi-squared analyses were also used when comparing categorical variables. RESULTS: UCLA correlated with step-count at all time-windows (p< 0.001). HOOS12-Function correlated with step-count preoperatively, at 6 weeks, and at 3 months (p< 0.001). High step-count individuals had improved UCLA scores compared to low step-count individuals preoperatively (Δ1.5, p< 0.001), at 6 weeks (Δ0.9, p< 0.001), at 3 months (Δ1.4, p< 0.001), and at 6 months (Δ1.4, p< 0.001). High step-count individuals had improved HOOS12-Function scores compared to low step-count individuals preoperatively (Δ9.6, p< 0.001), at 6 weeks (Δ5.3, p< 0.001), and at 3 months (Δ6.1, p< 0.001). Males had greater step-count at all time points (p< 0.001). Younger patients and low BMI patients had greater step-count across all time points (p< 0.001). CONCLUSION: High step-count improved PROMs scores compared to low step-count. Early post-operative step-count was significantly impacted by age, sex, and BMI. Generic recovery profiles may not be appropriate across diverse populations.
RESUMO
PURPOSE: The objective of this study was to determine if intra-operatively measured joint gaps are associated with 2-year pain outcomes in total knee arthroplasty (TKA) and whether balance and laxity windows could be defined throughout flexion to optimize 2-year pain outcomes. Our hypothesis is that intra-operative joint gaps are associated with 2 year post-operative pain outcome. METHODS: A prospective study investigating 310 robotically assisted TKAs was performed. Final intra-operative joint gap data were recorded using a digital tensioner and component alignment data were recorded by the robotics system. Patient demographics and Knee Injury and Osteoarthritis Outcome Score (KOOS) were recorded pre-operatively and KOOS and Hospital for Special Surgery (HSS) satisfaction were recorded at 2 years post-op. A random search Simulated Annealing (SANN) optimisation algorithm was used to determine global optimum laxity and balance windows at different flexion angles which maximized the 2-year KOOS pain scores. The windows were combined to determine the impact of achieving optimal laxity and balance throughout flexion. To improve clinical utility, boundaries identified by the SANN algorithm were rounded to the nearest 0.5 mm before statistical analysis. RESULTS: Laxity and balance windows were defined in extension (Med lax: -2.0 to 2.5 mm, Lat lax: -0.5 to 2.5 mm, Balance: -3.0 to 0.0 mm), mid-flexion (Med lax: -1.0 to 2.5 mm, Lat lax: -0.5 to 3.0 mm, Balance: -2.0 to 2.0 mm), and flexion (Med lax: -2.0 to 3.5 mm, Lat lax: -2.0 to 1.5 mm, Balance: -3.0 to 3.0 mm). When all windows were satisfied, the greatest difference in KOOS pain score was observed (100.0 vs 94.4, p < 0.0001). The highest percentage of knees satisfying the Patient Acceptable Symptom State (PASS) for KOOS pain was also observed in knees which satisfied all windows compared to knees which did not (93% vs 71%, p = 0.0009). The proportion of knees which satisfy the PASS threshold decreased in knees which only satisfied 1-3 (29%) or 4-6 (69%) windows (p ≤ 0.0018). No optimal windows were found between component alignment and KOOS pain outcome (p ≥ 0.1180). High satisfaction was found across all groups (≥ 95%). CONCLUSION: Intra-operatively measured joint gaps are associated with all KOOS sub-score outcomes at 2 years after TKA. Optimal windows for a clinically relevant improvement in post-operative KOOS pain were defined for laxity and balance but not for alignment indicating balance may have a greater impact on outcome than alignment. LEVEL OF EVIDENCE: II.
Assuntos
Artroplastia do Joelho , Osteoartrite do Joelho , Humanos , Articulação do Joelho/cirurgia , Estudos Prospectivos , Osteoartrite do Joelho/cirurgia , Amplitude de Movimento Articular , Dor/cirurgiaRESUMO
Background: Kinematic alignment (KA) and related personalized alignment strategies in total knee arthroplasty (TKA) target restoration of native joint line obliquity and alignment. In practice, deviations from exact restoration of the prearthritic joint surface are tolerated for either the femur or tibia to achieve ligamentous balance. It remains unknown what laxity, balance, and alignment would result if a pure resurfacing of both femur and tibia were performed in a KA TKA technique. Methods: We used data from 382 robot-assisted TKA performed with a digital joint tensioner to simulate TKA with a pure resurfacing KA technique for both femur and tibia. All knees had the posterior cruciate ligament retained. Knees were subdivided into 4 groups based on preoperative coronal alignment: valgus, neutral, varus, and high varus. Medial and lateral laxity in extension and flexion, balance in extension and flexion, and coronal plane alignment were compared between groups using analysis of variance testing. Results: In simulated pure resurfacing KA TKA across a range of preoperative coronal plane deformities, only 11%-31% of knees would have mediolateral extension ligament balance within ±1 mm, and 20%-41% would have a medial flexion gap that is looser than the lateral flexion gap. Over 45% of knees would have coronal hip-knee-ankle angle >3 degrees from mechanical neutral. Conclusions: In simulations of pure resurfacing KA TKA, there was wide variability in the resulting laxity and alignment outcomes. Most knees had alignment and balance outcomes outside of normally accepted ranges. Techniques that deviate from pure resurfacing in order to achieve balance appear favorable.
RESUMO
Background: The aims of this study were to (1) assess the degree of variation in acetabular component placement and combined anteversion in a large cohort of dislocating total hip arthroplasties; (2) assess the spinopelvic characteristics of the cohort; and (3) examine the association between cup anteversion and reported direction of instability. Methods: A commercial database of 245 dislocating total hip arthroplasties referred for postoperative computed tomography and functional radiographic imaging and analysis were reviewed. Spinopelvic parameters and cup and stem positions were measured in the supine, standing, flex-seated, and anterior pelvic plane (APP) positions. Spinopelvic characteristics were stratified by high, neutral, and low cup anteversion using thresholds of >35° and <15° anteversion in standing, respectively. Results: In the dislocation cohort, 62%, 45%, and 42% of cups were within the safe zone in supine, standing, and the APP, respectively (P < .001). Patients with high vs neutral or low cup anteversion had significantly stiffer spines, more posterior pelvic tilt in standing, greater changes in pelvic tilt, and higher sagittal imbalance. Of the 45 patients with high cup anteversion and reported instability direction, 60% and 40% were reported to have posterior and anterior instability, respectively, with no differences in spinopelvic characteristics. Conclusions: In this dislocating cohort, there is a decreased percentage of cups within the safe zone in the APP and standing position compared to the supine reference. In addition, we found that patients having poor spinopelvic characteristics and high cup anteversion can still dislocate, suggesting that adjusting cup anteversion alone may not be sufficient for preventing instability.
RESUMO
BACKGROUND: Spinopelvic (SP) mobility patterns during postural changes affect three-dimensional acetabular component position, the incidence of prosthetic impingement, and total hip arthroplasty (THA) instability. Surgeons have commonly placed the acetabular component in a similar "safe zone" for most patients. Our purpose was to determine the incidence of bone and prosthetic impingement with various cup orientations and determine if a preoperative SP analysis with individualized cup orientation lessens impingement. METHODS: A preoperative SP evaluation of 78 THA subjects was performed. Data were analyzed using a software program to determine the prevalence of prosthetic and bone impingement with a patient individualized cup orientation versus 6 commonly selected cup orientations. Impingement was correlated with known SP risk factors for dislocation. RESULTS: Prosthetic impingement was least with the individualized choice of cup position (9%) versus preselected cup positions (18%-61%). The presence of bone impingement (33%) was similar in all groups and not affected by cup position. Factors associated with impingement in flexion were age, lumbar flexion, pelvic tilt (stand to flexed seated), and functional femoral stem anteversion. Risk factors in extension included standing pelvic tilt, standing SP tilt, lumbar flexion, pelvic rotation (supine to stand and stand to flexed seated), and functional femoral stem anteversion. CONCLUSION: Prosthetic impingement is reduced with individualized cup positioning based on SP mobility patterns. Bone impingement occurred in one-third of patients and is a noteworthy consideration in preoperative THA planning. Known SP risk factors for THA instability correlated with the presence of prosthetic impingement in both flexion and extension.
Assuntos
Artroplastia de Quadril , Prótese de Quadril , Luxações Articulares , Humanos , Artroplastia de Quadril/efeitos adversos , Artroplastia de Quadril/métodos , Acetábulo/cirurgia , Luxações Articulares/cirurgia , Fêmur/cirurgia , Postura , Prótese de Quadril/efeitos adversos , Amplitude de Movimento ArticularRESUMO
BACKGROUND: Instability is a leading cause of early failure following total knee arthroplasty (TKA). Enabling technologies can improve accuracy, but their clinical value remains undetermined. The purpose of this study was to determine the value of achieving a balanced knee joint at the time of TKA. METHODS: A Markov model was developed to determine the value from reduced revisions and improved outcomes associated with TKA joint balance. Patients were modeled for the first 5 years following TKA. The threshold to determine cost-effectiveness was set at an incremental cost effectiveness ratio of $50,000/quality-adjusted life year (QALY). A sensitivity analysis was performed to evaluate the influence of QALY improvement (ΔQALY) and Revision Rate Reduction on additional value generated compared to a conventional TKA cohort. The impact of each variable was evaluated by iterating over a range of ΔQALY (0 to 0.046) and Revision Rate Reduction (0% to 30%) and calculating the value generated while satisfying the incremental cost effectiveness ratio threshold. Finally, the impact of surgeon volume on these outcomes was analyzed. RESULTS: The total value of a balanced knee for the first 5 years was $8,750, $6,575, and $4,417 per case, for low, medium, and high-volume surgeons, respectively. Change in QALY accounted for greater than 90% of the value gain with a reduction in revisions making up the rest in all scenarios. The economic contribution of revision reduction was relatively constant regardless of surgeon volume ($500/case). CONCLUSION: Achieving a balanced knee had the greatest impact on ΔQALY over early revision rate. These results can help assign value to enabling technologies with joint balancing capabilities.
Assuntos
Artroplastia do Joelho , Osteoartrite do Joelho , Humanos , Artroplastia do Joelho/métodos , Articulação do Joelho/cirurgia , Análise Custo-Benefício , Osteoartrite do Joelho/cirurgia , ReoperaçãoRESUMO
Background: Both restricted inverse kinematic alignment (iKA) and gap balancing aim for a balanced total knee arthroplasty by adjusting femoral component position based on ligamentous gaps. However, iKA targets a native tibial joint line vs resecting perpendicular to the mechanical axis. This study compares how these 2 techniques impact the balance and laxity throughout flexion and joint line obliquity (JLO), arithmetic hip-knee-ankle angle (aHKA), and the coronal plane alignment of the knee (CPAK). Methods: Two surgeons performed 75 robot-assisted iKA total knee arthroplasties. A digital joint tensioner collected laxity data throughout flexion before femoral resection. The femoral component position was determined using predictive gap-planning to optimize the balance throughout flexion. Planned gap balancing (pGB) simulations were performed for each case using neutral tibial resections. Mediolateral balance, laxity, and CPAK were compared among pGB, planned iKA (piKA), and final iKA. Results: Both piKA and pGB had similar mediolateral balance and laxity, with mean differences <0.4 mm. piKA had a lower mean absolute difference from native JLO than pGB (3 ± 2° vs 7 ± 4°, P < .001). aHKA was similar (P > .05) between pGB and piKA. piKA recreated a more native CPAK distribution, with types I-V being the most common ones, while most pGB knees were of type V, VII, and III. Final iKA and piKA had similar mediolateral balance and laxity, with a root-mean-square error <1.4 mm. Conclusions: Although balance, laxity, and aHKA were similar between piKA and pGB, piKA better restored native JLO and CPAK phenotypes. The neutral tibial resection moved most pGB knees into types V, VII, and III. Surgeons should appreciate how the alignment strategy affects knee phenotypes.
RESUMO
PURPOSE: To describe the mediolateral (ML) gap balance in pre-resection arthritic knees undergoing robot-assisted (RA) total knee arthroplasty (TKA) within the nine phenotypes of the Coronal Plane Alignment of the Knee (CPAK) classification. METHODS: A total of 1124 RA TKA cases were retrospectively reviewed. ML balance was calculated using a digital ligament tensioning device following tibial resection and prior to any femoral resection throughout flexion (10°, 40°, and 90°). Lateral distal femoral angle (LDFA) and medial proximal tibial angle (MPTA) were landmarked intra-operatively and adjusted for wear based on hip-knee-ankle angle (HKA). Knees were then subdivided into CPAK categories based on the arithmetic HKA (aHKA) and joint line obliquity (JLO). Differences in balance between CPAK phenotypes were compared. RESULTS: For aHKA, a greater medial gap was observed in varus compared to neutral or valgus knees at 10° (5.2 ± 3.0 mm vs 3.3 ± 3.2 mm vs - 0.4 ± 5.0 mm respectively; p < 0.0001). A similar trend was observed for JLO in distal apex compared to neutral and proximal apex knees at 10° (3.4 ± 3.6 vs 1.1 ± 5.0 vs - 2.4 ± 6.3 respectively; p < 0.0001). The greatest ML balance differences were found when combining JLO and aHKA at 10° (type I vs type VI: ∆6.6 mm; p < 0.0001). CONCLUSION: There is a high degree of variability in arthritic ML balance within and between each CPAK phenotype. A single alignment philosophy based on bony landmarks alone may not be sufficient to balance all knees. Utilisation of robotics and digital ligament tensioning devices serves as important adjuncts to characterize the patient-specific soft tissue profile.
Assuntos
Artroplastia do Joelho , Osteoartrite do Joelho , Humanos , Tornozelo/cirurgia , Estudos Retrospectivos , Articulação do Joelho/cirurgia , Extremidade Inferior/cirurgia , Tíbia/cirurgia , Osteoartrite do Joelho/cirurgiaRESUMO
Background: Recent developments in intra-operative sensor technology provide surgeons with predictive and real-time feedback on joint balance. It remains unknown, however, whether these technologies are better suited to femur-first or tibia-first workflows. This study investigates the balance accuracy, precision and early patient outcomes between the femur-first and tibial-first workflows using a digital gap-balancing tool. Methods: One-hundred six patients had posterior cruciate ligament sacrificing total knee arthroplasty using a digital joint tensioner. The participants were divided into 4 groups with different visibility to balance data 1) Femur-first blinded data, 2) Femur-first not blinded data, 3) Tibia-first blinded data, 4) Tibia-first not blinded data with predictive balancing. Knee Injury and Osteoarthritis Outcome Score and University of California at Los Angeles activity level were recorded at 1-year. Results: Group 4 reported less midflexion imbalance (40°) compared to all other groups (1: 1.5 mm, 2: 1.7 mm, 3: 1.6 mm, 4: 1.0 mm, P < .031) and reduced variance compared to all other groups at 40° and 90° (P < .012), resulting in an increased frequency of joints balanced within 2 mm throughout flexion in group 4 (1: 69%, 2: 65%, 3: 67%, 4: 91%, P < .006). No differences were found between 3-month, 6-month, or 1-year outcome scores between technique. Conclusions: Improvements in balance were observed in midflexion instability and balance variability throughout flexion when a tibia-first approach in combination with a digital balancing tool was used. The combination of a digital balancing tool and a tibia-first approach allowed a target joint balance to be achieved more accurately compared to a non-sensor augmented or femur-first approach.