Physical Regimes and Mechanisms of Picosecond Laser Fragmentation of Gold Nanoparticles in Water from X-ray Probing and Atomistic Simulations.

Laser fragmentation in liquids has emerged as a promising green chemistry technique for changing the size, shape, structure, and phase composition of colloidal nanoparticles, thus tuning their properties to the needs of practical applications. The advancement of this technique requires a solid understanding of the mechanisms of laser-nanoparticle interactions that lead to the fragmentation. While theoretical studies have made impressive practical and mechanistic predictions, their experimental validation is required. Hence, using the picosecond laser fragmentation of Au nanoparticles in water as a model system, the transient melting and fragmentation processes are investigated with a combination of time-resolved X-ray probing and atomistic simulations. The direct comparison of the diffraction profiles predicted in the simulations and measured in experiments has revealed a sequence of several nonequilibrium processes triggered by the laser irradiation. At low laser fluences, in the regime of nanoparticle melting and resolidification, the results provide evidence of a transient superheating of crystalline nanoparticles above the melting temperature. At fluences about three times the melting threshold, the fragmentation starts with evaporation of Au atoms and their condensation into small satellite nanoparticles. As fluence increases above five times the melting threshold, a transition to a rapid (explosive) phase decomposition of superheated nanoparticles into small liquid droplets and vapor phase atoms is observed. The transition to the phase explosion fragmentation regime is signified by prominent changes in the small-angle X-ray scattering profiles measured in experiments and calculated in simulations. The good match between the experimental and computational diffraction profiles gives credence to the physical picture of the cascade of thermal fragmentation regimes revealed in the simulations and demonstrates the high promise of the joint tightly integrated computational and experimental efforts.

In Situ Study of the Interface-Mediated Solid-State Reactions during Growth and Postgrowth Annealing of Pd/a-Ge Bilayers.

Ohmic or Schottky contacts in micro- and nanoelectronic devices are formed by metal-semiconductor bilayer systems, based on elemental metals or thermally more stable metallic compounds (germanides, silicides). The control of their electronic properties remains challenging as their structure formation is not yet fully understood. We have studied the phase and microstructure evolution during sputter deposition and postgrowth annealing of Pd/a-Ge bilayer systems with different Pd/Ge ratios (Pd:Ge, 2Pd:Ge, and 4Pd:Ge). The room-temperature deposition of up to 30 nm Pd was monitored by simultaneous, in situ synchrotron X-ray diffraction, X-ray reflectivity, and optical stress measurements. With this portfolio of complementary real-time methods, we could identify the microstructural origins of the resistivity evolution during contact formation: Real-time X-ray diffraction measurements indicate a coherent, epitaxial growth of Pd(111) on the individual crystallites of the initially forming, polycrystalline Pd2Ge[111] layer. The crystallization of the Pd2Ge interfacial layer causes a characteristic change in the real-time wafer curvature (tensile peak), and a significant drop of the resistivity after 1.5 nm Pd deposition. In addition, we could confirm the isostructural interface formation of Pd/a-Ge and Pd/a-Si. Subtle differences between both interfaces originate from the lattice mismatch at the interface between compound and metal. The solid-state reaction during subsequent annealing was studied by real-time X-ray diffraction and complementary UHV surface analysis. We could establish the link between phase and microstructure formation during deposition and annealing-induced solid-state reaction: The thermally induced reaction between Pd and a-Ge proceeds via diffusion-controlled growth of the Pd2Ge seed crystallites. The second-phase (PdGe) formation is nucleation-controlled and takes place only when a sufficient Ge reservoir exists. The real-time access to structure and electronic properties on the nanoscale opens new paths for the knowledge-based formation of ultrathin metal/semiconductor contacts.

Photoluminescence of Fully Inorganic Colloidal Gold Nanocluster and Their Manipulation Using Surface Charge Effects.

Fully inorganic, colloidal gold nanoclusters (NCs) constitute a new class of nanomaterials that are clearly distinguishable from their commonly studied metal-organic ligand-capped counterparts. As their synthesis by chemical methods is challenging, details about their optical properties remain widely unknown. In this work, laser fragmentation in liquids is performed to produce fully inorganic and size-controlled colloidal gold NCs with monomodal particle size distributions and an fcc-like structure. Results reveal that these NCs exhibit highly pronounced photoluminescence with quantum yields of 2%. The emission behavior of small (2-2.5 nm) and ultrasmall (<1 nm) NCs is significantly different and dominated by either core- or surface-based emission states. It is further verified that emission intensities are a function of the surface charge density, which is easily controllable by the pH of the surrounding medium. This experimentally observed correlation between surface charge and photoluminescence emission intensity is confirmed by density functional theoretical simulations, demonstrating that fully inorganic NCs provide an appropriate material to bridge the gap between experimental and computational studies of NCs. The presented study deepens the understanding of electronic structures in fully inorganic colloidal gold NCs and how to systematically tune their optical properties via surface charge density and particle size.

In situ speciation and spatial mapping of Zn products during pulsed laser ablation in liquids (PLAL) by combined synchrotron methods.

Pulsed laser ablation in liquids is a hierarchical multi-step process to produce pure inorganic nanoparticle colloids. Controlling this process is hampered by the partial understanding of individual steps and structure formation. In situ X-ray methods are employed to resolve macroscopic dynamics of nanosecond PLAL as well to analyse the distribution and speciation of ablated species with a microsecond time resolution. High time resolution can be achieved by synchrotron-based methods that are capable of 'single-shot' acquisition. X-ray multicontrast imaging by a Shack-Hartmann setup (XHI) and small angle X-ray scattering (SAXS) resolve evolving nanoparticles inside the transient cavitation bubble, while X-ray absorption spectroscopy in dispersive mode opens access to the total material yield and the chemical state of the ejecta. It is confirmed that during ablation nanoparticles are produced directly as well as reactive material is detected, which is identified in the early stage as Zn atoms. Nanoparticles within the cavitation bubble show a metal signature, which prevails for milliseconds, before gradual oxidation sets in. Ablation is described by a phase explosion of the target coexisting with full evaporation. Oxidation occurs only as a later step to already formed nanoparticles.

Shack-Hartmann wavefront sensors based on 2D refractive lens arrays and super-resolution multi-contrast X-ray imaging.

Different approaches of 2D lens arrays as Shack-Hartmann sensors for hard X-rays are compared. For the first time, a combination of Shack-Hartmann sensors for hard X-rays (SHSX) with a super-resolution imaging approach to perform multi-contrast imaging is demonstrated. A diamond lens is employed as a well known test object. The interleaving approach has great potential to overcome the 2D lens array limitation given by the two-photon polymerization lithography. Finally, the radiation damage induced by continuous exposure of an SHSX prototype with a white beam was studied showing a good performance of several hours. The shape modification and influence in the final image quality are presented.

In situ structural kinetics of picosecond laser-induced heating and fragmentation of colloidal gold spheres.

Fragmentation of colloidal 54 nm gold nanoparticles by picosecond laser pulses is recorded by time-resolved X-ray scattering, giving access to structural dynamics down to a 80 ps resolution. Lattice temperature and energy dissipation have been quantified to verify that the maximum applied fluence of 1800 J m-2 heats up the particles close to boiling. Already within 30 ns, particles with significantly lower particle sizes of 2 to 3 nm are detected, which hints towards an ultrafast process either by a thermal phase explosion or Coulomb instability. An arrested growth is observed on a microsecond time scale resulting in a final particle size of 3-4 nm with high yield. In this context, the fragmentation in a NaCl/NaOH solution seems to limit growth by electrostatic stabilization of fragments, whereas it does not modify the initial product sizes. The laser-induced fragmentation process is identified as a single-step, instantaneous reaction.

Inverted Hartmann mask for single-shot phase-contrast x-ray imaging of dynamic processes.

In this Letter, we present the application of the inverted Hartmann mask for time-resolved single-shot phase-contrast x-ray imaging. The inverted Hartmann mask is a periodic array of free-standing gold pillars. The array is manufactured by UV lithography and electroplating. Time-resolved measurements are performed for imaging of pulsed laser ablation in liquids using white-beam synchrotron radiation. The inverted Hartmann mask in combination with a single-shot imaging technique provides sufficient differential phase contrast even at very short exposure times. It can be effectively used for phase-contrast x-ray imaging of fast dynamic processes with temporal resolution on the millisecond scale.

Structural and Thermal Characterisation of Nanofilms by Time-Resolved X-ray Scattering.

High time resolution in scattering analysis of thin films allows for determination of thermal conductivity by transient pump-probe detection of dissipation of laser-induced heating, TDXTS. We describe an approach that analyses the picosecond-resolved lattice parameter reaction of a gold transducer layer on pulsed laser heating to determine the thermal conductivity of layered structures below the transducer. A detailed modeling of the cooling kinetics by a Laplace-domain approach allows for discerning effects of conductivity and thermal interface resistance as well as basic depth information. The thermal expansion of the clamped gold film can be calibrated to absolute temperature change and effects of plastic deformation are discriminated. The method is demonstrated on two extreme examples of phononic barriers, isotopically modulated silicon multilayers with very small acoustic impedance mismatch and silicon-molybdenum multilayers, which show a high resistivity.

Early appearance of crystalline nanoparticles in pulsed laser ablation in liquids dynamics.

The size and crystallinity of gold and silver nanoparticles during the process of pulsed laser ablation in water (PLAL) is investigated with microsecond and sub-microsecond time resolution. While basic observations have already been established, such as detection of particles inside the cavitation bubble, trapping of ablated matter by the bubble or the action of size quenching on a sub-millisecond time scale, the structure formation mechanism is still a matter of debate. Quantifying the nanoparticle release and crystallinity close to the irradiated metal target by wide and small angle X-ray scattering reveals the presence of nanoparticles ahead of the developing vapour bubble and inside the bubble. While the (temporal) distribution is in agreement with a homogeneously particle-filled bubble, solid particles are detected at the advancing bubble front. Wide-angle X-ray scattering confirms the crystalline nature of these large particles. This reveals that for picosecond ablation the expulsion of condensed phases of material during the ablation process adds significantly to the bimodal size distribution, relating to recent models of film lift-off and liquid metal Rayleigh instabilities.

Incubation Effect of Pre-Irradiation on Bubble Formation and Ablation in Laser Ablation in Liquids.

Pulsed laser ablation in liquids (PLAL) is a multi-scale process, which is widely studied either in batch ablation with prolonged target irradiation as well as mechanistic investigations, in a defined (single-shot) process. However, fundamental studies on defined pulse series are rare. We have investigated the effect of a developing rough morphology of the target surface on the PLAL process with nanosecond pulses and, partially, picosecond pulses. At low fluence the cavitation bubble growth as well as the ablation yield depend on the irradiation history of the target. The bubble size increases with repeated irradiation on one spot for the first 2-30 pulses as well as with the applied dose. This is discussed within the framework of incubation effects. Incubation is found to be important, resulting in a bubble volume increase by a factor of six or more between pristine and corrugated targets. The target surface, changing from smooth to corrugated, induces a more efficient localization of laser energy at the solid-liquid interface. This is accompanied by a suppressed reflectivity and more efficient coupling of energy into the laser-induced plasma. Thus, the cavitation bubble size increases as well as ablation being enhanced. At high fluence, such incubation is masked by the rapid development of surface damage within the first shots, which eventually would lead to a reduction of bubble sizes.

Time and Mechanism of Nanoparticle Functionalization by Macromolecular Ligands during Pulsed Laser Ablation in Liquids.

Laser ablation of gold in liquids with nanosecond laser pulses in aqueous solutions of inorganic electrolytes and macromolecular ligands for gold nanoparticle size quenching is probed inside the laser-induced cavitation bubble by in situ X-ray multicontrast imaging with a Hartmann mask (XHI). It is found that (i) the in situ size quenching power of sodium chloride (NaCl) in comparison to the ablation in pure water can be observed by the scattering contrast from XHI already inside the cavitation bubble, while (ii) for polyvinylpyrrolidone (PVP) as a macromolecular model ligand an in situ size quenching cannot be observed. Complementary ex situ characterization confirms the overall size quenching ability of both additive types NaCl and PVP. The macromolecular ligand as well as its monomer N-vinylpyrrolidone (NVP) are mainly effective for growth quenching of larger nanoparticles on later time scales, leading to the conclusion of an alternative interaction mechanism with ablated nanoparticles compared to the electrolyte NaCl, probably outside of the cavitation bubble, in the surrounding liquid phase. While monomer and polymer have similar effects on the particle properties, with the polymer being slightly more efficient, only the polymer is effective against hydrodynamic aggregation.

Thermal dynamics of pulsed-laser excited gold nanorods in suspension.

Photothermal reactions of metallic nanostructures, such as gold nanorods show appealing structural relaxations, such as bubble formation or particle modification. We have employed a pump-probe method to record the structural relaxations of a suspension of gold nanorods upon femtosecond laser excitation by pulsed X-ray scattering both with wide-angle and small-angle sensitivity. Single-pulse reactions include transient bubble formation at 20 J m-2 and irreversible nanorod reshaping at 30 J m-2. Thus the window for reversible excitation is very narrow. Additionally we could map the time-domain and fluence behaviour in a wide range to characterize the relaxations comprehensively. The polarized laser pulse first selectively excites nanorods aligned with the laser electric field, but at higher fluence non-aligned rods are also transformed. At low fluence this transformation happens in the solid state, while at higher fluence the rods melt.

Pulsed laser ablation in liquids: Impact of the bubble dynamics on particle formation.

Pulsed laser ablation in liquids (PLAL) is a multiscale process, involving multiple mutually interacting phenomena. In order to synthesize nanoparticles with well-defined properties it is important to understand the dynamics of the underlying structure evolution. We use visible-light stroboscopic imaging and X-ray radiography to investigate the dynamics occurring during PLAL of silver and gold on a macroscopic scale, whilst X-ray small angle scattering is utilized to deepen the understanding on particle genesis. By comparing our results with earlier reports we can elucidate the role of the cavitation bubble. We find that symmetry breaking at the liquid-solid interface is a critical factor for bubble motion and that the bubble motion acts on the particle distribution as confinement and retraction force to create secondary agglomerates.

Fluence Threshold Behaviour on Ablation and Bubble Formation in Pulsed Laser Ablation in Liquids.

The ablation yield and bubble-formation process during nanosecond pulsed-laser ablation of silver in water are analysed by stroboscopic videography, time-resolved X-ray radiography and in situ UV/Vis spectroscopy. This process is studied as function of lens-target distance and laser fluence. Both the ablation yield and the bubble-cavitation process exhibit threshold behaviour as a function of fluence, which is linked to the efficiency of coupling of energy at the water/target interface. Although ablation happens below this threshold, quantitative material emission is linked to bubble formation. Above the threshold, both bubble size and ablation show linear behaviour.

Target geometry and rigidity determines laser-induced cavitation bubble transport and nanoparticle productivity - a high-speed videography study.

Laser-induced cavitation has mostly been studied in bulk liquid or at a two-dimensional wall, although target shapes for the particle synthesis may strongly affect bubble dynamics and interfere with particle productivity. We investigated the dynamics of the cavitation bubble induced by pulsed-laser ablation in liquid for different target geometries with high-speed laser microsecond videography and focus on the collapse behaviour. This method enables us observations in a high time resolution (intervals of 1 µs) and single-pulse experiments. Further, we analyzed the nanoparticle productivity, the sizes of the synthesized nanoparticles and the evolution of the bubble volume for each different target shape and geometry. For the ablation of metal (Ag, Cu, Ni) wire tips a springboard-like behaviour after the first collapse is observed which can be correlated with vertical projectile motion. Its turbulent friction in the liquid causes a very efficient transport and movement of the bubble and ablated material into the bulk liquid and prevents particle redeposition. This effect is influenced by the degree of freedom of the wire as well as the material properties and dimensions, especially the Young's modulus. The most efficient and largest bubble movement away from the wire was observed for a thin (500 µm) silver wire with velocities up to 19.8 m s(-1) and for materials with a small Young's modulus and flexural rigidity. We suggest that these observations may contribute to upscaling strategies and increase of particle yield towards large synthesis of colloids based on targets that may continuously be fed.

Femtosecond laser written nanostructures in Ge-doped glasses.

We report on nanostructures induced by femtosecond laser pulses in the bulk of Germanium-doped silica glasses. For studying structural properties of the nanostructure constituents small-angle x-ray scattering and SEM served to map pore size, filling factor and periodicity. Our results show that with increasing the Ge doping concentration, the aspect ratio (transverse to inscribing laser) of nanometric pores rises while they arrange in a smaller period in contrast to nanogratings in pristine fused silica. Consequently, higher optical retardance can be obtained demonstrating the pronounced glass decomposition due to the changing network structure.

A hierarchical view on material formation during pulsed-laser synthesis of nanoparticles in liquid.

Pulsed-laser assisted nanoparticle synthesis in liquids (PLAL) is a versatile tool for nanoparticle synthesis. However, fundamental aspects of structure formation during PLAL are presently poorly understood. We analyse the spatio-temporal kinetics during PLAL by means of fast X-ray radiography (XR) and scanning small-angle X-ray scattering (SAXS), which permits us to probe the process on length scales from nanometers to millimeters with microsecond temporal resolution. We find that the global structural evolution, such as the dynamics of the vapor bubble can be correlated to the locus and evolution of silver nanoparticles. The bubble plays an important role in particle formation, as it confines the primary particles and redeposits them to the substrate. Agglomeration takes place for the confined particles in the second bubble. Additionally, upon the collapse of the second bubble a jet of confined material is ejected perpendicularly to the surface. We hypothesize that these kinetics influence the final particle size distribution and determine the quality of the resulting colloids, such as polydispersity and modality through the interplay between particle cloud compression and particle release into the liquid.

On the rewriting of ultrashort pulse-induced nanogratings.

In this study, we report on the erasure and rewriting of nanogratings by femtosecond laser pulses in the bulk of fused silica. To map the structural processes during rewriting, a combination of optical retardance measurement, small angle X-ray scattering, and scanning electron microscopy was used. The results reveal that already few pulses lead to erasure and formation of anisotropic structures. Repetitive rewriting favors the formation of nanoscopic pores, which increases the optical retardance of nanogratings for large pulse numbers.

A portable ultrahigh-vacuum system for advanced synchrotron radiation studies of thin films and nanostructures: EuSi2 nano-islands.

A portable ultrahigh-vacuum system optimized for in situ variable-temperature X-ray scattering and spectroscopy experiments at synchrotron radiation beamlines was constructed and brought into operation at the synchrotron radiation facility ANKA of the Karlsruhe Institute of Technology, Germany. Here the main features of the new instrument are described and its capabilities demonstrated. The surface morphology, structure and stoichiometry of EuSi2 nano-islands are determined by in situ grazing-incidence small-angle X-ray scattering and X-ray absorption spectroscopy. A size reduction of about a factor of two of the nano-islands due to silicide decomposition and Eu desorption is observed after sample annealing at 1270 K for 30 min.

Dynamics of silver nanoparticle formation and agglomeration inside the cavitation bubble after pulsed laser ablation in liquid.

The formation of nanoparticles within the laser-induced cavitation bubble is studied in situ using small angle X-ray scattering with high spatiotemporal resolution. Directly after laser ablation, two different particle fractions consisting of compact primary particles of 8-10 nm size and agglomerates of 40-60 nm size are formed. The abundance of these species is strongly influenced by the dynamics of the oscillating cavitation bubble. Primary particle mass is most abundant during maximal expansion of the first bubble and reappears a little weaker in the rebound. In contrast to this, the mass abundance of agglomerates is relatively low in the first bubble but strongly increases during first bubble collapse and following rebound. Although most of the ablated material is trapped inside the bubble and follows its oscillation, a minor fraction of both species could be detected outside the cavitation bubble even before its final collapse.