Novel Hybrid Polymer Composites Based on Anthraquinone and Eco-Friendly Dyes with Potential for Use in Intelligent Packaging Materials.

This study aimed to present the influence of bio-based and anthraquinone dyes and their combinations on the optical properties of ethylene-propylene (EPM) composites after thermo-oxidative and climatic aging. Therefore, the chosen polymer was filled with a natural, plant-origin flavonoid-quercetin, and with two commercial anthraquinone dyes (C.I. Solvent Yellow 163 and C.I. Solvent Red 207). The manufactured polymer composites were subjected to accelerated aging tests: weathering and thermo-oxidation, respectively. Examination of the materials' properties indicated that the combination of synthetic and natural dyes can result in better resistance to oxidizing agents and higher thermal stability of ethylene-propylene products. Moreover, color change of quercetin-containing samples due to exposure to simulated atmospheric conditions could be a promising solution for use as aging indicators in intelligent packaging materials that will inform about the ongoing degradation process. Another interesting finding is that these samples exhibited good fungistatic activity against Candida albicans yeast and Aspergillus niger mold. Overall, this novel solution based on hybrid polymer composites containing natural and commercial dyes is a more environmentally friendly alternative to traditional materials used in the plastic packaging industry with better and more desirable properties.

Plant-Origin Stabilizer as an Alternative of Natural Additive to Polymers Used in Packaging Materials.

Over the past 25 years, cannabis plants have gained major popularity in the research community. This study aimed to evaluate the antioxidant capacity and stabilization efficiency of cannabidiol (CBD) extract in two different polymers: polylactide (PLA) and ethylene-norbornene copolymer (Topas) that are used in packaging materials more often. The research technology included weathering in a special chamber, surface free energy and color change measurements, surface morphology and Fourier-transform infrared spectroscopy (FTIR) analysis, thermogravimetry, and determination of the oxidation induction time or temperature (OIT) values, based on which the effectiveness of the cannabidiol extract could be estimated. Obtained results showed that the addition of CBD to polymer mixtures significantly increased their resistance to oxidation, and it can be used as a natural stabilizer for polymeric products. Moreover, samples with cannabidiol changed their coloration as a result of weathering. Therefore, this natural additive can also be considered as a colorimetric indicator of aging that informs about the changes in polymeric materials during their lifetime. On the other hand, surface properties of samples with cannabidiol content did not alter much compared to pure Topas and PLA.

Influence of a Natural Plant Antioxidant on the Ageing Process of Ethylene-norbornene Copolymer (Topas).

In the field of polymer technology, a variety of mainly synthetic additives are used to stabilize the materials during processing. However, natural compounds of plant origin can be a green alternative to chemicals such as synthetic polyphenols. An analysis of the effect of hesperidin on the aging behavior of ethylene-norbornene copolymer was performed. The evaluation of changes in the tested samples was possible by applying the following tests: determination of the surface energy and OIT values, mechanical properties analysis, colour change measurements, FT-IR and TGA analyses. The obtained results proved that hesperidin can be effectively used as natural stabilizer for polymers. Furthermore, as a result of this compound addition to Topas-silica composites, their surface and physico-mechanical properties have been improved and the resistance to aging significantly increased. Additionally, hesperidin can act as a dye or colour indicator and only few scientific reports describe a possibility of using flavonoids to detect changes in products during their service life, e.g., in food packaging. In the available literature, there is no information about the potential use of hesperidin as a stabilizer for cycloolefin copolymers. Therefore, this approach may contribute not only to the current state of knowledge, but also presents an eco-friendly solution that can be a good alternative to synthetic stabilizers.

Lifetime Prediction Methods for Degradable Polymeric Materials-A Short Review.

The determination of the secure working life of polymeric materials is essential for their successful application in the packaging, medicine, engineering and consumer goods industries. An understanding of the chemical and physical changes in the structure of different polymers when exposed to long-term external factors (e.g., heat, ozone, oxygen, UV radiation, light radiation, chemical substances, water vapour) has provided a model for examining their ultimate lifetime by not only stabilization of the polymer, but also accelerating the degradation reactions. This paper presents an overview of the latest accounts on the impact of the most common environmental factors on the degradation processes of polymeric materials, and some examples of shelf life of rubber products are given. Additionally, the methods of lifetime prediction of degradable polymers using accelerated ageing tests and methods for extrapolation of data from induced thermal degradation are described: the Arrhenius model, time-temperature superposition (TTSP), the Williams-Landel-Ferry (WLF) model and 5 isoconversional approaches: Friedman's, Ozawa-Flynn-Wall (OFW), the OFW method corrected by N. Sbirrazzuoli et al., the Kissinger-Akahira-Sunose (KAS) algorithm, and the advanced isoconversional method by S. Vyazovkin. Examples of applications in recent years are given.