Interface and Morphology Engineered Amorphous Si for Ultrafast Electrochemical Lithium Storage.

Ultrafast high-capacity lithium-ion batteries are extremely desirable for portable electronic devices, where Si is the most promising alternative to the conventional graphite anode due to its very high theoretical capacity. However, the low electronic conductivity and poor Li-diffusivity limit its rate capability. Moreover, high volume expansion/contraction upon Li-intake/uptake causes severe pulverization of the electrode, leading to drastic capacity fading. Here, interface and morphology-engineered amorphous Si matrix is being reported utilizing a few-layer vertical graphene (VG) buffer layer to retain high capacity at both slow and fast (dis)charging rates. The flexible mechanical support of VG due to the van-der-Waals interaction between the graphene layers, the weak adhesion between Si and graphene, and the highly porous geometry mitigated stress, while the three-dimensional mass loading enhanced specific capacity. Additionally, the high electronic conductivity of VG boosted rate-capability, resulting in a reversible gravimetric capacity of ≈1270 mAh g-1 (areal capacity of ≈37 µAh cm-2 ) even after 100 cycles at an ultrafast cycling rate of 20C, which provides a fascinating way for conductivity and stress management to obtain high-performance storage devices.

Chiral Light Emission from a Hybrid Magnetic Molecule-Monolayer Transition Metal Dichalcogenide Heterostructure.

Hybrid layered materials assembled from atomically thin crystals and small molecules bring great promises in pushing the current information and quantum technologies beyond the frontiers. We demonstrate here a class of layered valley-spin hybrid (VSH) materials composed of a monolayer two-dimensional (2D) semiconductor and double-decker single molecule magnets (SMMs). We have materialized a VSH prototype by thermal evaporation of terbium bis-phthalocyanine onto a MoS2 monolayer and revealed its composition and stability by both microscopic and spectroscopic probes. The interaction of the VSH components gives rise to the intersystem crossing of the photogenerated carriers and moderate p-doping of the MoS2 monolayer, as corroborated by the density functional theory calculations. We further explored the valley contrast by helicity-resolved photoluminescence (PL) microspectroscopy carried out down to liquid helium temperatures and in the presence of the external magnetic field. The most striking feature of the VSH is the enhanced A exciton-related valley emission observed at the out-of-resonance condition at room temperature, which we elucidated by the proposed nonradiative energy drain transfer mechanism. Our study thus demonstrates the experimental feasibility and great promises of the ultrathin VSH materials with chiral light emission, operable by physical fields for emerging opto-spintronic, valleytronic, and quantum information concepts.

Isotope Engineered Fluorinated Single and Bilayer Graphene: Insights into Fluorination Selectivity, Stability, and Defect Passivation.

Tailoring the physicochemical properties of graphene through functionalization remains a major interest for next-generation technological applications. However, defect formation due to functionalization greatly endangers the intrinsic properties of graphene, which remains a serious concern. Despite numerous attempts to address this issue, a comprehensive analysis has not been conducted. This work reports a two-step fluorination process to stabilize the fluorinated graphene and obtain control over the fluorination-induced defects in graphene layers. The structural, electronic and isotope-mass-sensitive spectroscopic characterization unveils several not-yet-resolved facts, such as fluorination sites and CF bond stability in partially-fluorinated graphene (F-SLG). The stability of fluorine has been correlated to fluorine co-shared between two graphene layers in fluorinated-bilayer-graphene (F-BLG). The desorption energy of co-shared fluorine is an order of magnitude higher than the CF bond energy in F-SLG due to the electrostatic interaction and the inhibition of defluorination in the F-BLG. Additionally, F-BLG exhibits enhanced light-matter interaction, which has been utilized to design a proof-of-concept field-effect phototransistor that produces high photocurrent response at a time <200 µs. Thus, the study paves a new avenue for the in-depth understanding and practical utilization of fluorinated graphenic carbon.

The use of sample positioning to control defect creation by oxygen plasma in isotopically labelled bilayer graphene membranes.

Monolayer and isotopically labelled bilayer graphene membranes were prepared on grids for transmission electron microscopy (TEM). In order to create defects in the graphene layers in a controlled way, we studied the sensitivity of the individual graphene layers to the oxygen plasma treatment. We tested samples with different configurations by varying the order of the transfer of layers and changing the orientation of the samples with respect to the plasma chamber. Using Raman spectroscopy, HRTEM and X-ray photoelectron spectroscopy, we demonstrated defect formation and determined the quantity and chemical composition of the defects. By keeping the sample structure and the setup of the experiment unchanged, the significant role of the sample orientation with respect to the chamber was demonstrated. The effect was accounted for by the variation of the accessibility of the sample surface for the reactive species. Therefore, this effect can be used to control the degree of damage in each layer, resulting in differing numbers of defects present on each side of the sample.

Towards Catalytically Active Porous Graphene Membranes with Pulsed Laser Deposited Ceria Nanoparticles.

Porous graphene with catalytically active ceria nanometre-size particles were prepared using pulsed laser deposition (PLD) on graphene produced through chemical vapour deposition (CVD). The reported process provided porous graphene containing ceria nanoparticles as confirmed by HR TEM and XPS. Isotopically labelled 13 C graphene was employed to study desorption of the species containing carbon. Methanol adsorption was utilised to probe the nature of the catalytic activity of prepared ceria decorated graphene. The important role of graphene support for the stabilization of reduced ceria nanoparticles was finally confirmed. Increased dehydrogenation activity of graphene with ceria nanoparticles leading to CO and H2 formation was demonstrated.

Interaction of human osteoblast-like Saos-2 cells with stainless steel coated by silicalite-1 films.

This paper investigates the interaction of human osteoblast-like Saos-2 cells with stainless steel covered by a film of densely inter-grown silicalite-1 crystals with defined outer and inner surfaces. The chemical composition of this film, labeled as SF(RT), was tuned by heat treatment at 300°C and 500°C (labeled as SF(300) and SF(500), respectively) and characterized by X-ray photoelectron spectroscopy (XPS), water drop contact angle (WCA) measurements and scanning electron microscopy (SEM). The number, the spreading area and the activity of alkaline phosphatase of human osteoblast-like Saos-2 cells in cultures on the silicalite-1 film were affected by the chemical composition of its outer surface and by its micro-porous structure. The number and the spreading area of the adhered osteoblast-like cells on day 1 was highest on the surface of SF(RT) relative to their adhesion and spreading on a glass cover slip due to the SF(RT) topology. However, SF(300) markedly supported cell growth during days 3 and 7 after seeding.

Tuning the Reactivity of Graphene by Surface Phase Orientation.

Tuning the local reactivity of graphene is a subject of paramount importance. Among the available strategies, the activation/passivation of graphene by copper substrate is very promising because it enables the properties of graphene to be influenced without any transfer procedure, since graphene can be grown directly on copper. Herein, it is demonstrated that the reactivity of graphene towards fluorination is strongly influenced by the face of the surface of the copper substrate. Graphene on the copper foil was probed and grain orientations were identified. The results of the reactivity were evaluated by means of X-ray photo electron and Raman spectroscopy. Graphene on the grains with a surface orientation close to the (111) face is the most reactive, whereas graphene on the grains close to the (110) surface is least reactive. The long-term stability test showed that the decomposition of fluorinated graphene was slowest on the grains with a surface orientation close to the (111) face. The results are consistent with the variation of the mechanical strain of graphene on different faces of copper. In contrast, no clear correlation of the graphene reactivity with doping induced by different facets was found.

Decomposition of Fluorinated Graphene under Heat Treatment.

Fluorination modifies the electronic properties of graphene, and thus it can be used to provide material with on-demand properties. However, the thermal stability of fluorinated graphene is crucial for any application in electronic devices. Herein, X-ray photoelectron spectroscopy (XPS), temperature-programmed desorption (TPD), and Raman spectroscopy were used to address the impact of the thermal treatment on fluorinated graphene. The annealing, at up to 700 K, caused gradual loss of fluorine and carbon, as was demonstrated by XPS. This loss was associated with broad desorption of CO and HF species, as monitored by TPD. The minor single desorption peak of CF species at 670 K is suggested to rationalize defect formation in the fluorinated graphene layer during the heating. However, fluorine removal from graphene was not complete, as some fraction of strongly bonded fluorine can persist despite heating to 1000 K. The role of intercalated H2 O and OH species in the defluorination process is emphasised.

On the role of Nb-related sites of an oxidized ß-TiNb alloy surface in its interaction with osteoblast-like MG-63 cells.

ß-Stabilized titanium (Ti) alloys containing non-toxic elements, particularly niobium (Nb), are promising materials for the construction of bone implants. Their biocompatibility can be further increased by oxidation of their surface. Therefore, in this study, the adhesion, growth and viability of human osteoblast-like MG 63 cells in cultures on oxidized surfaces of a ß-TiNb alloy were investigated and compared with the cell behavior on thermally oxidized Ti, i.e. a metal commonly used for constructing bone implants. Four experimental groups of samples were prepared: Ti or TiNb samples annealed to 600 °C for 60 min in a stream of dry air, and Ti and TiNb samples treated in Piranha solution prior to annealing. We found that on all TiNb-based samples, the cell population densities on days 1, 3 and 7 after seeding were higher than on the corresponding Ti-based samples. As revealed by XPS and Raman spectroscopy, and also by isoelectric point measurements, these results can be attributed to the presence of T-Nb2O5 oxide phase in the surface of the alloy sample, which decreased its negative zeta (ζ)-potential in comparison with zeta (ζ)-potential of the Ti sample at physiological pH. This effect was tentatively explained by the presence of positively charged defects acting as Lewis sites of the surface Nb2O5 phase. Piranha treatment slightly decreases the biocompatibility of the samples, which for the alloy samples may be explained by a decrease in the number of defective sites with this treatment. Thus, the presence of Nb and thermal oxidation of ß-stabilized Ti alloys play a significant role in the increased biocompatibility of TiNb alloys.

Use of liquid chromatography with electrochemical detection for the determination of antioxidants in less common fruits.

Neurodegenerative disorders (NDD) have become the common global health burden over the last several decades. According to World Health Organization (WHO), a staggering 30 million people will be affected by Alzheimer's disease in Europe and the USA by 2050. Effective therapies in this complex field considering the multitude of symptoms associated with NDD indications, have not been found yet. Based on the results of NDD related studies, prevention appears to be the promise alternative. Antioxidative and anti-inflammatory properties are hypothesized for natural phenolics, a group of plant secondary products that may positively impact neurodegenerative diseases. In these studies, phenolic-rich extracts from less common fruit species: Blue honeysuckle (Lonicera edulis, Turcz. ex. Freyn), Saskatoon berry (Amelanchier alnifolia Nutt.), and Chinese hawthorn (Crateagus pinnatifida Bunge) were obtained and analyzed to detect neuroprotective substances content and establish a potential therapeutic value. High performance liquid chromatography with electrochemical detection was optimized and further applied on analysis of the extracts of less common fruit species. It was observed that Chinese hawthorn and Blue honeysuckle extracts are potent source of neuroprotective phenolic antioxidants. In accordance the results, it appears that the fruit or formulated products may have the potential for the prevention of neurodegenerative diseases.

Interaction of CO with palladium supported on oxidized tungsten.

A model catalyst system, palladium on tungsten oxide, has been examined by temperature-programmed desorption and photoemission spectroscopy. The samples were prepared by evaporation of palladium onto an oxidized tungsten foil under ultrahigh vacuum conditions. Mostly three-dimensional (3-D) palladium (Pd) clusters were found to be present on oxidized tungsten (WOx) surfaces at room temperature. Upon annealing to 670 K, the palladium clusters are redispersed and decorated by the WOx surface layer. The nature of the WOx phase on top of the palladium clusters is dependent on the mode of oxidation of the tungsten foil prior to palladium deposition. Mainly W(2+) species decorate palladium deposits on tungsten oxidized at room temperature, while mainly W(4+) species are on top of palladium deposits on the surface oxidized at 1300 K. The appearance of a Pd(n+)-O-W(4+) mixed oxide phase with n < 2 was observed on the oxidized tungsten surface. The substantial reduction (relative to nonannealed samples) of molecular CO coverage induced by annealing is discussed in terms of the changes in chemical composition and morphology of the outermost surface.