RESUMO
Self-assembled monolayers composed of various long-chain aliphatic molecules and different tail functional groups have been synthesized on the Au(111) surface and characterized by Kelvin probe force microscopy and ultraviolet photoelectron spectroscopy. Carboxy, amino, thio and methyl terminal groups have been considered in the design of self-assembled monolayers with different aliphatic chain lengths (from C6 to C16). Work function measurements by Kelvin probe force microscopy have been carried out under a controlled and room atmosphere. Remarkably, a reduction of the relative humidity from 40% to 3% has induced a work function shift of up to 0.3 eV. As expected, the changes of the chain length of the aliphatic moiety and of the tail group have a significant impact on the tuning of the measured work function (3.90 eV for dodecanethiol versus 4.57 eV for mercaptohexadecylamine). Surprisingly, the change of the net dipole moment of the tail group (sign and amplitude) does not dominate the work function variations. In contrast, the change of the chain length and the possibility of the tail group to form a complex hydrogen bond network between molecules lead to significant modulations of the work function. In order to interpret these original findings, density functional theory models of equivalent self-assembled monolayers adsorbed on the Au(111) surface have been developed at an unprecedented level of description with large supercells including simultaneously 27 co-adsorbed molecules and weak van der Waals interactions between them. Such large systems have allowed the theoretical modeling of complex hydrogen bond networks between molecules when possible (carboxy tail group). The comparison between computed and measured work functions shows a striking agreement, thus allowing the disentanglement of the previously mentioned competing effects. This consistency between experiment and theory will help in designing the electronic properties of self-assembled monolayers in the context of molecular electronics and organic transistors.
RESUMO
Gold nanoparticles (AuNPs) deposited on a doped silicon substrate induce a local band bending and a local accumulation of positive charges in a semiconductor. Unlike the case of planar gold-silicon contacts, working with nanoparticles results in reduced values for the built-in potential and lower Schottky barriers. Here, AuNPs of 55 nm diameter were deposited on several silicon substrates that were previously functionalized with aminopropyltriethoxysilane (APTES). The samples are characterized by Scanning Electron Microscopy (SEM) and the nanoparticle surface density is assessed with dark-field optical microscopy. A density of 0.42 NP µm-2 was measured. Kelvin Probe Force Microscopy (KPFM) is used to measure the contact potential differences (CPD). The CPD images exhibit a ring-shaped pattern ("doughnut-shape") centred on each AuNP. The built-in potential is measured at +34 mV for n-doped substrates and it decreased to +21 mV for p-doped silicon. These effects are discussed using the classical electrostatic approach.
RESUMO
The functionalization of spherical gold nanoparticles (AuNPs) in solution with thiol molecules is essential for further developing their applications. AuNPs exhibit a clear localized surface plasmon resonance (LSPR) at 520 nm in water for 20 nm size nanoparticles, which is extremely sensitive to the local surface chemistry. In this study, we revisit the use of UV-visible spectroscopy for monitoring the LSPR peak and investigate the progressive reaction of thiol molecules on 22 nm gold nanoparticles. FTIR spectroscopy and TEM are used for confirming the nature of ligands and the nanoparticle diameter. Two thiols are studied: 11-mercaptoundecanoic acid (MUDA) and 16-mercaptohexadecanoic acid (MHDA). Surface saturation is detected after adding 20 nmol of thiols into 1.3 × 10-3 nmol of AuNPs, corresponding approximately to 15,000 molecules per AuNPs (which is equivalent to 10.0 molecules per nm2). Saturation corresponds to an LSPR shift of 2.7 nm and 3.9 nm for MUDA and MHDA, respectively. This LSPR shift is analyzed with an easy-to-use analytical model that accurately predicts the wavelength shift. The case of dodecanehtiol (DDT) where the LSPR shift is 15.6 nm is also quickly commented. An insight into the kinetics of the functionalization is obtained by monitoring the reaction for a low thiol concentration, and the reaction appears to be completed in less than one hour.
RESUMO
Immobilization of polyoxometalates (POMs) onto oxides is relevant to many applications in the fields of catalysis, energy conversion/storage, or molecular electronics. Optimization and understanding the molecule/oxide interface is crucial to rationally improve the performance of the final molecular materials. We herein describe the synthesis and covalent grafting of POM hybrids with remote carboxylic acid functions onto flat Si/SiO2 substrates. Special attention has been paid to the characterization of the molecular layer and to the description of the POM anchoring mode at the oxide interface through the use of various characterization techniques, including ellipsometry, AFM, XPS, and FTIR. Finally, electron transport properties were probed in a vertical junction configuration and energy level diagrams have been drawn and discussed in relation with the POM molecular electronic features inferred from cyclic-voltammetry, UV-visible absorption spectra, and theoretical calculations. The electronic properties of these POM-based molecular junctions are driven by the POM LUMO (d-orbitals) whatever the nature of the tether or the anchoring group.
RESUMO
Single charge electronics offer a way for disruptive technology in nanoelectronics. Coulomb blockade is a realistic way for controlling the electric current through a device with the accuracy of one electron. In such devices the current exhibits a step-like increase upon bias which reflects the discrete nature of the fundamental charge. We have assembled a double tunnel junction on an oxide-free silicon substrate that exhibits Coulomb staircase characteristics using gold nanoparticles (AuNPs) as Coulomb islands. The first tunnel junction is an insulating layer made of a grafted organic monolayer (GOM) developed for this purpose. The GOM also serves for attaching AuNPs covalently. The second tunnel junction is made by the tip of an STM. We show that this device exhibits reproducible Coulomb blockade I-V curves at 40 K in vacuum. We also show that depending on the doping of the silicon substrate, the whole Coulomb staircase can be adjusted. We have developed a simulation approach based on the orthodox theory that was completed by calculating the bias dependent tunnel barriers and by including an accurate calculation of the band bending. This model accounts for the experimental data and the doping dependence of Coulomb oscillations. This study opens new perspectives toward designing new kind of single electron transistors (SET) based on this dependence of the Coulomb staircase with the charge carrier concentration.
RESUMO
Electrostatic interactions at the nanoscale can lead to novel properties and functionalities that bulk materials and devices do not have. Here we used Kelvin probe force microscopy (KPFM) to study the work function (WF) of gold nanoparticles (NPs) deposited on a Si wafer covered by a monolayer of alkyl chains, which provide a tunnel junction. We find that the WF of Au NPs is size-dependent and deviates strongly from that of the bulk Au. We attribute the WF change to the charging of the NPs, which is a consequence of the difference in WF between Au and the substrate. For an NP with 10 nm diameter charged with â¼ 5 electrons, the WF is found to be only â¼ 3.6 eV. A classical electrostatic model is derived that explains the observations in a quantitative way. We also demonstrate that the WF and charge state of Au NPs are influenced by chemical changes of the underlying substrate. Therefore, Au NPs could be used for chemical and biological sensing, whose environmentally sensitive charge state can be read out by work function measurements.
RESUMO
The adsorption of ethylene on a Si(100)-2×1 surface in an ultrahigh vacuum has been monitored at room temperature by use of real-time surface differential reflectance spectroscopy, which clearly demonstrated that the adsorption follows a two-stage process. About half a monolayer is obtained for 1 L, while the second stage is much slower, yielding the complete monolayer for an exposure of â¼400 L. The kinetics over the full range has been successfully reproduced by a Monte Carlo calculation. The key point of this two-stage adsorption kinetic lies in the reduced adsorption probability (by a factor of several hundreds) on the Si dimers, neighbors of dimers which have already reacted, with respect to the adsorption probability on isolated dimers. This new kind of adsorption kinetics, due to a repulsion between already adsorbed molecules and additional molecules impinging on the surface, makes it a textbook case for a "cooperative" adsorption process.
Assuntos
Etilenos/química , Silício/química , Adsorção , Cinética , Modelos Químicos , Modelos Moleculares , Método de Monte Carlo , Óptica e Fotônica/métodos , Análise Espectral/métodosRESUMO
Two different organic monolayers were prepared on silicon Si(111) and modified for attaching gold nanoparticles. The molecules are covalently bound to silicon and form very ordered monolayers sometimes improperly called self-assembled monolayers (SAM). They are designed to be electrically insulating and to have very few electrical interface states. By positioning the tip of an STM above a nanoparticle, a double barrier tunnel junction (DBTJ) is created, and Coulomb blockade is demonstrated at 40 K. This is the first time Coulomb blockade is observed with an organic monolayer on oxide-free silicon. This work focuses on the fabrication and initial electrical characterization of this double barrier tunnel junction. The organic layers were prepared by thermal hydrosilylation of two different alkene molecules with either a long carbon chain (C11) or a shorter one (C7), and both were modified to be amine-terminated. FTIR and XPS measurements confirm that the Si(111) substrate remains unoxidized during the whole chemical process. Colloidal gold nanoparticles were prepared using two methods: either with citrate molecules (Turkevich method) or with ascorbic acid as the surfactant. In both cases AFM and STM images show a well-controlled deposition on the grafted organic monolayer. I-V curves obtained by scanning tunneling spectroscopy (STS) are presented on 8 nm diameter nanoparticles and exhibit the well-known Coulomb staircases at low temperature. The curves are discussed as a function of the organic layer thickness and silicon substrate doping.
RESUMO
Sum frequency generation (SFG) and difference frequency generation (DFG) are applied to study vibrational resonance of the thiophenol molecule adsorbed on two different gold samples. One sample is made of 17 nm gold nanoparticles (AuNPs) fixed on a silicon substrate that has been previously functionalized with a silane monolayer (aminopropyltriethoxysilane, APTES). This sample is fully characterized through visible reflection spectroscopy and AFM. The second sample is a gold monocrystal also covered with thiophenol molecules. From their comparison, an enhancement factor of 21 is deduced for the SFG signal on AuNPs with respect to the Au(111), related to the surface plasmon resonance (SPR). From a combined analysis of the SFG and DFG spectra, we demonstrate that SFG/DFG spectroscopy is able to identify the nature of the substrate where the molecules are adsorbed. This opens new perspectives for this nonlinear spectroscopy by adding to its well-known intrinsic surface specificity, the ability to selectively probe the chemical layer capping the AuNPs.
Assuntos
Ouro , Nanopartículas Metálicas , Fenóis/análise , Análise Espectral/métodos , Compostos de Sulfidrila/análise , Adsorção , Ouro/química , Nanopartículas Metálicas/químicaRESUMO
Direct adsorption of phenylacetylene on clean silicon surface Si(100)-2 x 1 is studied in ultrahigh vacuum (UHV). The combination of scanning tunnel microscopy (STM) and surface differential reflectance spectroscopy (SDRS) with Monte Carlo calculations are put together to draw a realistic kinetic model of the evolution of the surface coverage as a function of the molecular exposure. STM images of weakly covered surfaces provide evidence of two very distinct adsorption geometries for phenylacetylene, with slightly different initial sticking probabilities. One configuration is detected with STM as a bright spot that occupies two dangling bonds of a single dimer, whereas the other configuration occupies three dangling bonds of adjacent dimers. These data are used to implement a Monte Carlo model which further serves to design an accurate kinetic model. The resulting evolution toward saturation is compared to the optical data from surface differential reflectance spectroscopy (SDRS). SDRS is an in situ technique that monitors the exact proportion of affected adsorption sites and therefore gives access to the surface coverage which is evaluated at 0.65. We investigate the effect of surface temperature on this adsorption mechanism and show that it has no major effect either on kinetics or on structure, unless it passes the threshold of dissociation measured at ca. 200 degrees C. This offers a comprehensive image of the whole adsorption process of phenylacetylene from initial up to complete saturation.