High-Productivity Single-Pass Electrochemical Birch Reduction of Naphthalenes in a Continuous Flow Electrochemical Taylor Vortex Reactor.

We report the development of a single-pass electrochemical Birch reduction carried out in a small footprint electrochemical Taylor vortex reactor with projected productivities of >80 g day-1 (based on 32.2 mmol h-1), using a modified version of our previously reported reactor [Org. Process Res. Dev. 2021, 25, 7, 1619-1627], consisting of a static outer electrode and a rapidly rotating cylindrical inner electrode. In this study, we used an aluminum tube as the sacrificial outer electrode and stainless steel as the rotating inner electrode. We have established the viability of using a sacrificial aluminum anode for the electrochemical reduction of naphthalene, and by varying the current, we can switch between high selectivity (>90%) for either the single ring reduction or double ring reduction with >80 g day-1 projected productivity for either product. The concentration of LiBr in solution changes the fluid dynamics of the reaction mixture investigated by computational fluid dynamics, and this affects equilibration time, monitored using Fourier transform infrared spectroscopy. We show that the concentrations of electrolyte (LiBr) and proton source (dimethylurea) can be reduced while maintaining high reaction efficiency. We also report the reduction of 1-aminonaphthalene, which has been used as a precursor to the API Ropinirole. We find that our methodology produces the corresponding dihydronaphthalene with excellent selectivity and 88% isolated yield in an uninterrupted run of >8 h with a projected productivity of >100 g day-1.

Photochemistry of transition metal carbonyls.

The purpose of this Tutorial Review is to outline the fundamental photochemistry of metal carbonyls, and to show how the advances in technology have increased our understanding of the detailed mechanisms, particularly how relatively simple experiments can provide deep understanding of complex problems. We recall some important early experiments that demonstrate the key principles underlying current research, concentrating on the binary carbonyls and selected substituted metal carbonyls. At each stage, we illustrate with examples from recent applications. This review first considers the detection of photochemical intermediates in three environments: glasses and matrices; gas phase; solution. It is followed by an examination of the theory underpinning these observations. In the final two sections, we briefly address applications to the characterization and behaviour of complexes with very labile ligands such as N2, H2 and alkanes, concentrating on key mechanistic points, and also describe some principles and examples of photocatalysis.

High Yielding Continuous-Flow Synthesis of Norketamine.

A new continuous-flow process is presented for synthesis of the pharmaceutical intermediate norketamine (5). Our approach has been to take the well-established and industrially applied batch synthetic route to this promising antidepressant precursor and convert it to a telescoped multi-stage continuous-flow platform. This involves the α-bromination of a ketone, an imination/rearrangement sequence with liquid ammonia, and a thermally induced α-iminol rearrangement. Our approach is high yielding and provides several processing advantages including the reduction of many of the hazards conventionally associated with this route, particularly in the handling of liquid bromine, hydrogen bromide gas, and liquid ammonia. Each of these presents serious operational challenges in a batch process at scale.

Self-Optimization of Continuous Flow Electrochemical Synthesis Using Fourier Transform Infrared Spectroscopy and Gas Chromatography.

A continuous-flow electrochemical synthesis platform has been developed to enable self-optimization of reaction conditions of organic electrochemical reactions using attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) and gas chromatography (GC) as online real-time monitoring techniques. We have overcome the challenges in using ATR FT-IR as the downstream analytical methods imposed when a large amount of hydrogen gas is produced from the counter electrode by designing two types of gas-liquid separators (GLS) for analysis of the product mixture flowing from the electrochemical reactor. In particular, we report an integrated GLS with an ATR FT-IR probe at the reactor outlet to give a facile and low-cost solution to determining the concentrations of products in gas-liquid two-phase flow. This approach provides a reliable method for quantifying low-volatile analytes, which can be problematic to be monitored by GC. Two electrochemical reactions the methoxylation of 1-formylpyrrolidine and the oxidation of 3-bromobenzyl alcohol were investigated to demonstrate that the optimal conditions can be located within the pre-defined multi-dimensional reaction parameter spaces without intervention of the operator by using the stable noisy optimization by branch and FIT (SNOBFIT) algorithm.

A New Approach to Sustainability: A Moore's Law for Chemistry.

"… How do we have a major impact on delivering sustainable chemistry? Carbon-neutral laboratories can drive down the environmental costs of chemistry. We propose that sustainable chemistry requires some overarching goal that can be embraced by everyone in the chemical supply chain as well as by the public …" Read more in the Guest Editorial by Martyn Poliakoff, Peter Licence, and Michael W. George.

Continuous Photo-Oxidation in a Vortex Reactor: Efficient Operations Using Air Drawn from the Laboratory.

We report the construction and use of a vortex reactor which uses a rapidly rotating cylinder to generate Taylor vortices for continuous flow thermal and photochemical reactions. The reactor is designed to operate under conditions required for vortex generation. The flow pattern of the vortices has been represented using computational fluid dynamics, and the presence of the vortices can be easily visualized by observing streams of bubbles within the reactor. This approach presents certain advantages for reactions with added gases. For reactions with oxygen, the reactor offers an alternative to traditional setups as it efficiently draws in air from the lab without the need specifically to pressurize with oxygen. The rapid mixing generated by the vortices enables rapid mass transfer between the gas and the liquid phases allowing for a high efficiency dissolution of gases. The reactor has been applied to several photochemical reactions involving singlet oxygen (1O2) including the photo-oxidations of α-terpinene and furfuryl alcohol and the photodeborylation of phenyl boronic acid. The rotation speed of the cylinder proved to be key for reaction efficiency, and in the operation we found that the uptake of air was highest at 4000 rpm. The reactor has also been successfully applied to the synthesis of artemisinin, a potent antimalarial compound; and this three-step synthesis involving a Schenk-ene reaction with 1O2, Hock cleavage with H+, and an oxidative cyclization cascade with triplet oxygen (3O2), from dihydroartemisinic acid was carried out as a single process in the vortex reactor.

Continuous N-alkylation reactions of amino alcohols using γ-Al2O3 and supercritical CO2: unexpected formation of cyclic ureas and urethanes by reaction with CO2.

The use of γ-Al2O3 as a heterogeneous catalyst in scCO2 has been successfully applied to the amination of alcohols for the synthesis of N-alkylated heterocycles. The optimal reaction conditions (temperature and substrate flow rate) were determined using an automated self-optimising reactor, resulting in moderate to high yields of the target products. Carrying out the reaction in scCO2 was shown to be beneficial, as higher yields were obtained in the presence of CO2 than in its absence. A surprising discovery is that, in addition to cyclic amines, cyclic ureas and urethanes could be synthesised by incorporation of CO2 from the supercritical solvent into the product.

The Twelve Principles of CO2 CHEMISTRY.

This paper introduces a set of 12 Principles, based on the acronym CO2 CHEMISTRY, which are intended to form a set of criteria for assessing the viability of different processes or reactions for using CO2 as a feedstock for making organic chemicals. The principles aim to highlight the synergy of Carbon Dioxide Utilisation (CDU) with the components of green and sustainable chemistry as well as briefly pointing out the connection to the energy sector.

Applying green chemistry to the photochemical route to artemisinin.

Artemisinin is an important antimalarial drug, but, at present, the environmental and economic costs of its semi-synthetic production are relatively high. Most of these costs lie in the final chemical steps, which follow a complex acid- and photo-catalysed route with oxygenation by both singlet and triplet oxygen. We demonstrate that applying the principles of green chemistry can lead to innovative strategies that avoid many of the problems in current photochemical processes. The first strategy combines the use of liquid CO2 as solvent and a dual-function solid acid/photocatalyst. The second strategy is an ambient-temperature reaction in aqueous mixtures of organic solvents, where the only inputs are dihydroartemisinic acid, O2 and light, and the output is pure, crystalline artemisinin. Everything else-solvents, photocatalyst and aqueous acid-can be recycled. Some aspects developed here through green chemistry are likely to have wider application in photochemistry and other reactions.

The periodic table: icon and inspiration.

To start this discussion meeting on the new chemistry of the elements held on 12 May 2014, Martyn Poliakoff, Foreign Secretary of the Royal Society, was invited to give the opening remarks. As a chemist and a presenter of the popular online video channel 'The periodic table of videos', Martyn communicates his personal and professional interest in the elements to the public, who in turn use these videos both as an educational resource and for entertainment purposes. Ever since Mendeleev's first ideas for the periodic table were published in 1869, the table has continued to grow as new elements have been discovered, and it serves as both icon and inspiration; its form is now so well established that it is recognized the world over as a symbol for science. This paper highlights but a few of the varied forms that the table can take, such as an infographic, which can convey the shortage of certain elements with great impact.

New phase equilibrium analyzer for determination of the vapor-liquid equilibrium of carbon dioxide and permanent gas mixtures for carbon capture and storage.

A high-pressure, phase equilibrium analyzer incorporating a fiber-optic reflectometer is described. The analyzer has been designed for measuring the vapor-liquid equilibrium data of multi-component mixtures of carbon dioxide and permanent gases, providing a novel tool to acquire of a large number of phase equilibrium data for the development of the new carbon capture and storage technologies. We demonstrate that the analyzer is suitable for determining both the bubble- and dew-point lines at temperature from 253 K and pressure up to 25 MPa using pure CO2 and two binary mixtures of CO2 + N2 and CO2 + H2.

Real-time feedback control using online attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy for continuous flow optimization and process knowledge.

The use of automated continuous flow reactors is described, with real-time online Fourier transform infrared spectroscopy (FT-IR) analysis to enable rapid optimization of reaction yield using a self-optimizing feedback algorithm. This technique has been applied to the solvent-free methylation of 1-pentanol with dimethyl carbonate using a γ-alumina catalyst. Calibration of the FT-IR signal was performed using gas chromatography to enable quantification of yield over a wide variety of flow rates and temperatures. The use of FT-IR as a real-time analytical technique resulted in an order of magnitude reduction in the time and materials required compared to previous studies. This permitted a wide exploration of the parameter space to provide process understanding and validation of the optimization algorithms.

Valorization of biomass: deriving more value from waste.

Most of the carbon-based compounds currently manufactured by the chemical industry are derived from petroleum. The rising cost and dwindling supply of oil have been focusing attention on possible routes to making chemicals, fuels, and solvents from biomass instead. In this context, many recent studies have assessed the relative merits of applying different dedicated crops to chemical production. Here, we highlight the opportunities for diverting existing residual biomass--the by-products of present agricultural and food-processing streams--to this end.