Spectrophotometric studies of charge-transfer complexes formed with ions N,N'-alkyldiyl-bis(pyridinium) derivatives and iodide.

The charge-transfer complexes (CTC) between electron donor iodide and pyridinium dimers and monomers as acceptors have been studied spectrophotometrically in acetonitrile, DMSO and water. The dimers were: N,N'-alkyldiyl-bis(4-cyanopyridinium) and N,N'-alkyldiyl-bis(2-bromopyridinium), and the monomers were: N-alkyl-4-cyanopyridinium and N-alkyl-2-bromopyridinium, bridged by n methylene spacers. The formation constant (KCTC), molar absorptivity (εCTC), fluorescence-quenching constant (KSV) were determined. The results indicate that the stoichiometry of the CTC for dimers and monomers is 1:1 (equimolar ratio), and its formation is favored for dimers more than for monomers, especially dimers with short methylene spacers forming a "sandwiched type-complex" in which the iodide is close to the two pyridinium rings. Solvents with low polarity favored the complex, which was destroyed by the presence of water. The experimental studies were complemented with theoretical studies with quantum mechanics (QM) calculations using density functional theory (DFT) and molecular mechanics (MM) simulations with Molecular Dynamics for identify the most stable conformers in acetonitrile solution. The electronic excitations were calculated with sequential QM/MM hybrid method, showing a charge-transfer wavelength in agreement with the UV-Vis absorption spectra obtained experimentally. It confirms the "sandwiched type-complex" conformers favoring the interaction of the iodide with one pyridinium rings and simultaneously forming one, or two, hydrogen bonds with the alkyl chain and additionally, for the case of dimers, with the other pyridinium ring.

Polyureas Versatile Polymers for New Academic and Technological Applications.

Polyureas (PURs) are a competitive polymer to their analogs, polyurethanes (PUs). Whereas PUs' main functional group is carbamate (urethane), PURs contain urea. In this revision, a comprehensive overview of PUR properties, from synthesis to technical applications, is displayed. Preparative routes that can be used to obtain PURs using diisocianates or harmless reagents such as CO2 and NH3 are explained, and aterials, urea monomers and PURs are discussed; PUR copolymers are included in this discussion as well. Bulk to soft components of PUR, as well as porous materials and meso, micro or nanomaterials are evaluated. Topics of this paper include the general properties of aliphatic and aromatic PUR, followed by practical synthetic pathways, catalyst uses, aggregation, sol-gel formation and mechanical aspects.

Synthesis of Novel Periodic Mesoporous Organosilicas Containing 1,4,5,8-Naphthalenediimides within the Pore Walls and Their Reduction To Generate Wall-Embedded Free Radicals.

Novel periodic mesoporous organosilicas (PMOs) containing 1,4,5,8-Naphthalenediimide (NDI) chromophores as an integral part of the pore walls were synthesized in acidic conditions, in the presence of inorganic tetraethyl orthosilicate, using triblock copolymer surfactant Pluronic P-123 as a template. The NDI precursor, the bridged silsesquioxane N, N'-bis(3-triethoxysilylpropyl)-1,4,5,8-naphthalenediimide, was synthesized by reaction of 1,4,5,8-naphthalenetetracarboxylic dianhydride with excess 3-aminopropyltriethoxysilane. A series of samples containing up to 19% (weight %) of NDI were prepared (the materials were labeled PMONDIs). 13C and 29Si solid-state nuclear magnetic resonance revealed that the NDI moiety was intact in the PMONDIs and efficiently grafted to the silica network. Samples with up to 16% NDI load presented an ordered two-dimensional-hexagonal mesoscopic structure, according to small-angle X-ray scattering, transmission electron microscopy, and nitrogen adsorption isotherms. Fluorescence spectra of the PMONDIs showed excimer formation upon excitation, suggesting high flexibility of the organic moieties. Reduction of PMONDIs with aqueous sodium dithionite led to the formation of wall-embedded NDI anion radicals, as observed by the appearance of new visible/near-infrared absorption bands. The PMONDIs were also shown to be efficient photocatalysts in the degradation of sulfadiazine, an antibiotic selected here as a model pollutant, which is usually present in water bodies and wastewater.

Nanostructured Polymeric Micelles Carrying Xanthene Dyes for Photodynamic Evaluation.

It was evaluated the properties of the xanthene dyes Erythrosin B, Eosin Y and theirs Methyl, Butyl and Decyl ester derivatives as possible photosensitizers (PS) for photodynamic treatments. The more hydrophobic dyes self-aggregate in water/ethanol solutions above 70% water (vol/vol) in the mixture. In buffered water, these PS were encapsulated in Pluronic polymeric surfactants of P-123 and F-127 by two methodologies: direct addition and the thin-film solid dispersion methods. The thin-film solid method provided formulations with higher stabilities besides effective encapsulation of the PS as monomers. Size measurements demonstrated that Pluronic forms self-assembled micelles with uniform size, which present slightly negative surface potential and a spherical form detected by TEM microscopy. The ester length modulates xanthene localization in the micelle, which is deeper with the increase in the alkyl chain. Moreover, some PS are distributed into two populations: one on the corona micelle interface shell (PEO layer) and the other into the core (PPO region). Although all PS formulations show high singlet oxygen quantum yield, promising results were obtained for Erythrosin B esters with the hydrophobic P-123, which ensures their potential as drug for clinical photodynamic applications.

GFP-SCFV: expression and possible applications as a tool for experimental investigations of atherosclerosis.

Experimental studies on atherosclerosis are crucial for investigating its pathophysiology, defining new therapeutic targets, and developing new drugs and diagnostic tools. Thus, many imaging markers have been developed and introduced in experimental studies. The main advantage of these new tools is that they allow the noninvasive diagnosis of atherosclerotic vascular disease. Here, we describe the cloning, expression, purification, and stabilization of a chimeric protein specifically designed to probe cells and tissues for the presence of LDL(-), a relevant marker of atherosclerosis. The DNA sequence that encodes the anti-LDL(-) scFv, previously obtained from a hybridoma secreting an anti-LDL(-) monoclonal antibody, was inserted into the bacterial vector pET-28a(+) in tandem with a DNA sequence encoding GFP. The recombinant protein was expressed in high yields in E. coli as inclusion bodies. The applicability of GFP-scFv was assessed by ELISA, which determined its affinity for LDL(-) and confocal microscopy, that showed macrophage uptake of the protein along with LDL(-). In conclusion, our data suggest that the anti-LDL(-) GFP-scFv chimeric protein could be useful in studies on atherogenesis as well as for developing diagnostic tools for atherosclerosis.

A novel role for an ECF sigma factor in fatty acid biosynthesis and membrane fluidity in Pseudomonas aeruginosa.

Extracytoplasmic function (ECF) sigma factors are members of cell-surface signaling systems, abundant in the opportunistic pathogen Pseudomonas aeruginosa. Twenty genes coding for ECF sigma factors are present in P. aeruginosa sequenced genomes, most of them being part of TonB systems related to iron uptake. In this work, poorly characterized sigma factors were overexpressed in strain PA14, in an attempt to understand their role in the bacterium's physiology. Cultures overexpressing SigX displayed a biphasic growth curve, reaching stationary phase earlier than the control strain, followed by subsequent growth resumption. During the first stationary phase, most cells swell and die, but the remaining cells return to the wild type morphology and proceed to a second exponential growth. This is not due to compensatory mutations, since cells recovered from late time points and diluted into fresh medium repeated this behavior. Swollen cells have a more fluid membrane and contain higher amounts of shorter chain fatty acids. A proteomic analysis was performed to identify differentially expressed proteins due to overexpression of sigX, revealing the induction of several fatty acid synthesis (FAS) enzymes. Using qRT-PCR, we showed that at least one isoform from each of the FAS pathway enzymes were upregulated at the mRNA level in the SigX overexpressing strain thus pointing to a role for this ECF sigma factor in the FAS regulation in P. aeruginosa.

Photodynamic therapy for American cutaneous leishmaniasis: the efficacy of methylene blue in hamsters experimentally infected with Leishmania (Leishmania) amazonensis.

The aim of this study was to investigate the effectiveness of Photodynamic Therapy (PDT) using Methylene Blue (MB) as the photosensitizing compound and a Light-Emitting Diode (LED) in American cutaneous leishmaniasis (ACL). Hamsters were experimentally infected with Leishmania (Leishmania) amazonensis. After the development of the lesions in the footpad, the animals were treated with MB three times a week for 3 months. Ten minutes after each application of MB, the lesions were irradiated with LED for 1 h. The lesions were evaluated weekly by the measurement of the hamster footpad thickness. At the end of the treatment the parasitic load was quantified in the regional lymph node of the hamsters. The treatment promoted a decrease in the thickness of infected footpad (P=0.0001) and reduction in the parasitic load in the regional lymph node (P=0.0007) of the animals from group treated with MB+LED. PDT using MB+LED in ACL caused by L. amazonensis shows a strong photodynamic effect. This therapy is very promising, once it is an inexpensive system and the own patient can apply it in their wound and in their house without the need of technical assistance.

Optimization of the ultrasound-assisted synthesis of allyl 1-naphthyl ether using response surface methodology

Allyl 1-naphthyl ethers are useful compounds for different purposes, but reported methods to synthesize them require long reaction times. In this work, we have obtained allyl 1-naphthyl ether in good yield using ultrasonic-assisted methodology in a 1-h reaction. A central composite design was used to obtain a statistical model and a response surface (p < 0.05; R2 = 0.970; R2adj = 0.949; R2 pred = 0.818) that can predict the optimal conditions to maximize the yield, validated experimentally.

Optimization of the ultrasound-assisted synthesis of allyl 1-naphthyl ether using response surface methodology.

Allyl 1-naphthyl ethers are useful compounds for different purposes, but reported methods to synthesize them require long reaction times. In this work, we have obtained allyl 1-naphthyl ether in good yield using ultrasonic-assisted methodology in a 1-h reaction. A central composite design was used to obtain a statistical model and a response surface (p<0.05; R(2)=0.970; R(2)(adj)=0.949; R(2)(pred)=0.818) that can predict the optimal conditions to maximize the yield, validated experimentally.

Poly-lactide-co-glycolide microparticle sizes: a rational factorial design and surface response analysis.

Microsphere size is a primary determinant of solute release velocity. We present here a rational way for producing PLGA microspheres with different and controlled sizes. The following process variables were studied: Stirring velocity during the second emulsion step, dispersed and continuous phases volume ratio, and poly(vinyl alcohol) concentration in the continuous phase. A full factorial experimental design 2(3) with triplicate at the central point was used to determine the influence of variables on PLGA microsphere mean size. The stirring velocity and poly(vinyl alcohol) concentration were the main variables at 0.95 significance level. An influence of PVA and stirring velocity on microspheres size is observed, there is no correlation for DP/CP volume ratio on size of microspheres. By combining the two variables--the stirring velocity and poly(vinyl alcohol) concentration, the surface response was analyzed. The increase of poly(vinyl alcohol) concentration with concomitant increase on stirring velocity produced microspheres with the lower sized. In contrast the lower poly(vinyl alcohol) concentration and the lower stirring velocity used produced the higher microspheres sized. Uniformly spherical and smooth microspheres (4-15 microm of diameter) were obtained. No significant difference was observed on Ponca S loading within the experimental region. Our results open the possibility of formulating PLGA microspheres with custom sizes performing a minimum of experiments as required for specific applications.